Load more than one user groups to system session variable GROUP from table

hi, I found that the value of the system session variable GROUP can be assigned by setting a sql in initialization blocks.
however, if there are some users with more than one user group.
can this be done by table driven (using sql in initialization blocks) ?
thanks !!

Referencing GROUP session variable in initialization blocks for different types of authentication
http://108obiee.blogspot.com/2009/10/referencing-group-session-variable-in.html
Users are assigned to multiple groups from external table with semicolons, see example two and three from the post.
Regards
Goran
http://108obiee.blogspot.com

Similar Messages

How to prevent the User from loading more than one seq file?

Hi,
I would like to prevent the tester operator from loading more than one test sequence. Any ideas how to do it?
Thanks
Rafi

Hi Marty,
Marty_H wrote:
Hello mhousel,
Testexec.exe by default loads the sequence files that were last open when it runs. It is often desired behavior to have multiple sequence files load automatically.
[Mark Housel] Maybe for some but certainly not for me.
This should be easily handled by TestStand without any problems. What do you mean by "chaos ensues"?
Certainly Teststand doesn't care a bit how many sequences are open. But, when my sequences open they initialize HW of the ATE associated with
that sequence file during the sequenceFileLoad callback. e.g. I allocate TELNET handles to a terminal
server that connects to multiple console within the system and als for
the UUT.
If a second sequence opens it knows nothing about the other sequence and again tries to open a TELENT session to the same port of the
terminal server and obviously fails, so my sequence reports that it
can't properly initialize the ATE HW. Bad juju!
Are your sequence files set to run automatically when they are loaded?
I guess so. Other than the trick of logging in as the special noExecution user and having special code in my sequence and modified Process Model I have no idea how to prevent a sequence fronm "runnin" when opened.
If you want to prevent Testexec.exe from loading multiple files, you should be able to close out one of the open files when it loads and that sequence file should not load in the future. I hope that helps.
The trick I read somewhere else of modifying the Testexec.uir file to never re-load a sequence file automatically seemes to have covered up solved the problem.
Thanks,
Mark

More than one user "using an expression" in a BPM Task

Hello,
I want to send a notification step for multiple users. I see two options
1. Choose one or more UME principals.
2. Use an expression.
However I have to send the notification for more than one user using an expression. I'm using this expression,
getPrincipal(DO_xyz)
but this only works for one user. I need something like this
getPrincipal(DO_xyz); getPrincipal(DO_xyz2); getPrincipal(DO_xyz3)
But this is not possible. I can't use a group because all this information is dynamic and it's born within the process.
Please, How can I solve this?
Best Regards
SU

Hello Abhijeet,
I've seen that I can use the getPrincipals adding in the XSD an string with 1..* cardinality. However I don't know how to map an attribute from the UITask to that new attribute in the XSD because in Web Dynpro I can't create an string with cardinality 1..*
I've tried to create a node (1..*) with a String inside in the UI but I couldn't map it to the process context, it shows me an error that I cannot map a node to a String.
Thanks
Regards
SU

Cant use more than one authorization group per report with SBO CR Basic

Cant use more than one authorization group per report with SBO CR Basic.
I have installed on SAP Business One SBO 2007 SP00 PL49 the Crystal Reports Basic 2.0.0.7.
i have defined two users, manager and supervisor.
I have defined two groups, M and S.
Manager belongs in managers (M), and supervisor is assigned to the supervisors (S).
i enter to one report, disable the public option to enable group authorization, and then check M group.
Manager can see the report, but Supervisor is not allowed. So far good.
Then i uncheck M, then check S in the report properties, and Manager cant get in, supervisor opens the report, So far good.
But when we check both Groups or more, only the M group authorization appears to work, and S group users cant acess, even the report is allowed for that group, also happens with all the groups appart the first (2nd, 3rd, 4th, etc.).
It seems that a report can manage a single group, but i have to be shure to tell this to the customer.
So far we have included all Manager users to the S group in order that only S group is used and authorized users can use, but this is duplicating user participation in groups, and it would be much easier to check the desired groups for a single report.

Cant use more than one authorization group per report with SBO CR Basic.
I have installed on SAP Business One SBO 2007 SP00 PL49 the Crystal Reports Basic 2.0.0.7.
i have defined two users, manager and supervisor.
I have defined two groups, M and S.
Manager belongs in managers (M), and supervisor is assigned to the supervisors (S).
i enter to one report, disable the public option to enable group authorization, and then check M group.
Manager can see the report, but Supervisor is not allowed. So far good.
Then i uncheck M, then check S in the report properties, and Manager cant get in, supervisor opens the report, So far good.
But when we check both Groups or more, only the M group authorization appears to work, and S group users cant acess, even the report is allowed for that group, also happens with all the groups appart the first (2nd, 3rd, 4th, etc.).
It seems that a report can manage a single group, but i have to be shure to tell this to the customer.
So far we have included all Manager users to the S group in order that only S group is used and authorized users can use, but this is duplicating user participation in groups, and it would be much easier to check the desired groups for a single report.

Entire Mac slows down every day, especially if more than one user logged in

Mac runs fine at the start of each day (after turning it on), but slows down by evening. iPhoto is typically at a crawl at that point, and I can't have more than one user logged in at a time, or the whole system takes forever to do anything. I've restarted, repaired disk, repaired disk permissions, run Cocktail, checked for viruses (VirusBarrier). It's easy to restore normal speed with these moves, but same problem every day. I have 24 GB left on this hard drive--is that too little?
Should I try erasing hard drive and restoring from Time Machine? Should I reload Mac OS X from discs?
Advice much appreciated. Thanks.

Robert Fishman1 wrote:
I have 24 GB left on this hard drive--is that too little?
you do the math
this will help:
Your Mac needs adequate hard drive space to operate normally. How full can a drive be before it's too full? There is no hard and fast rule that says “X” amount or “%” of free drive space is needed. A low amount of RAM requires more drive space for Virtual Memory’s swap files.
Problems from insufficient RAM and free hard disk space are discussed in this link
http://www.thexlab.com/faqs/lackofram.html
Here’s some general guidelines for minimum hard drive free space:
1. As a general rule, your available space should be 5GB as an absolute minimum as it generally requires that much free space to perform an Archive and Install of Mac OS X and still preserve some free space for VM swap files.
2. Some say that your hard drive should have at least 5% of it's capacity available for use. Still others say 10% to 15%. If you routinely process complex graphics and videos, even more space is required.
Look at these links about freeing up more space.
Where did my disk space go?
_*http://www.macfixitforums.com/showflat.php?Cat=&Board=Forum38&Number=770243*_
Download & use WhatSize described in this link or Disk Inventory X @ _*http://www.derlien.com/*_
Freeing space on your Mac OS X startup disk
_*http://www.thexlab.com/faqs/freeingspace.html*_
Amazing Disappearing Drive Space
_*http://www.pinkmutant.com/articles/TigerMisc.html*_
Increase HD Free Space
_*http://macosx.com/forums/howto-faqs/275191-how-easily-increase-hd-free-space-lap top.html*_
How to free up my disk space
http://www.macmaps.com/diskfull.html
JGG

Can I put more than one user under one Apple ID account. I want to let other family members use imessage on their own Apple device. Or is there another way to get this end result?

Can I put more than one user under one Apple ID account. I want to let other family members use imessage on their own Apple device. Or is there another way to get this end result?

You can seach the net for solutions like this one http://appletvvpn.com/how-to-connect-apple-tv-2-to-vpn/ another idea is to use a PC as the control and fit that with a wireless card and set up a ad hoc wireless network that the Apple TV uses.

How can we assign more than one request group to a responsibility?

Hi
Can anyone tell me how we can assign more than one request group to a responsibility?
Thanks
SS

Hi SS,
Its not possible, rather you should create a combination of Requests/RequestSets and create a new Request Group.
Regards,
Kiran

How create synonym for more than one user

Hi,
In a DB I have more than one schema. For example:
1) User1 has these tables:
Menu
Employes
Zipcode
Billing etc..
2) User2 has only the a personalized table Menu
3) User3 has only the a personalized table Menu
How can enable User2, User3 and other to use the tables Employes, Zipcode, Billing etc. of schema User1 ?
I think with synonyms. Can You help to write a script in order to create this ?
I hope in Your Help.
Thank You and Best Regards.
Gaetano

Hi Gaetano,
If I understand your requirement correctly User2, User3 and other users should be able to access tables owned by User1. If that's the case, synonyms won't help at all.
Read up any English dictionary and you'll understand what a synonym is.
What you need to do (as User1) is: GRANT the appropriate privilege (SELECT, UPDATE...) on the tables to the other users.
Oh, btw: what is a 'personalized table Menu'? I never heard that.
Regards,
Guido

How we can lock No more than one user can use the table at a single time

Hi Abapers,
0) which function modules to lock & unlock a table.
1) When you execute the program, we can check if there is any lock on this table. If yes, the user should be able to only view the table contents and not modify.
2) If there is no lock, then lock the table and go into change mode.
3) On exiting from the program, unlock the table using the function module.
4) more than one user can't modify the table just display.
Note: If there is any lock, display message saying table is locked.
Plz help me for this requirement.
Thanks
Nani

Hello Nani
Have a look at the lock object EMMARAE (Lock MARA and MARM/MAKT exclusively) in transaction SE11.
Inspect the F1 help for field Lock mode:
DE ENQMODE
Short Text
 Lock mode
Definition
 Defines how to synchronize table record access by several users.
The following modes exist:
 Exclusive lock
 The locked data can be read or processed by one user only. A request
 for another exclusive lock or for a shared lock is rejected.
 Shared lock
 Several users can read the same data at the same time, but as soon
 as a user edits the data, a second user can no longer access this
 data. Requests for further shared locks are accepted, even if they
 are issued by different users, but exclusive locks are rejected.
 Exclusive but not cumulative lock
 Exclusive locks can be requested by the same transaction more than
 once and handled successively, but an exclusive but not cumulative
 lock can only be requested once by a given transaction. All other
 lock requests are rejected.
If you want to lock a standard table search whether the table is used in lock objects (Where-Used-List). If it is a customer table you have to create your own lock object (including two function modules: one for enqueuing and the other for dequeuing).
The lock modules can be found in menu GoTo -> Lock Modules.
Given these lock modules the logic should be quite clear after starting the program:
1. Request lock -> if successful, continue in Change mode; -> if failed, continue in Display mode
2. Before leaving the report remove lock (note: no problem if no lock has been set in the beginning).
Regards
Uwe

Using Remote Desktop Admin app in more than one user account.

Is possible to have the ARD admin app use the same database and settings over more than one user account?
eg. I have ARD setup on my Mac as I am in charge of our organisations Macs. However if I am away for a few weeks, one of our other techs would be able to turn on my Mac, log in to a generic account, open ARD and it would be set up exactly as I have it in my user account.
I know that I could manually set up ARD in the other account, but with the number of machines we have I would rather not have to re-enter all those admin passwords all over again, and then have to remember to update ARD in the other account everytime we get a new machine or make other changes.

In theory, you could simply copy the com.apple.RemoteDesktop.plist into the preferences folder of the other user. Then they would simply have to know the Remote Desktop Password (which is probably stored in your KeyChain.)
I've never tried this, but it seems like it would work.

How Do I Share My Database Between More Than One User Account on the Same Mac?

How Do I Share My Database Between More Than One User Account on the Same Mac?

How to use multiple iPhone, iPad, or iPod devices with one computer. The only way is for you to have a separate user account to log into on that computer.

Can a user facetime with more than one user at a time

I can use facetime with Macbook and connect to another Macbook user on another WIFI network... I was wondering if one can facetime with more than one user at a time?

ellis911 wrote:
I can use facetime with Macbook and connect to another Macbook user on another WIFI network... I was wondering if one can facetime with more than one user at a time?
Only if you have more than one device running FaceTime at your end.
Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.5); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.5)
LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod4touch4.2.1

How can I see if my program is for more than one user? We think we have bought in design for more users, but can not find out how to get in for more than one?

How can I see if my program is for more than one user? We think we have bought in design for more users, but can not find out how to get in for more than one?

If you bought a CC for team, you can log in at http://adobe.com and insert the e-mail that you gave at the moment at the purchase and than you can manage and see you product/plan/team.
If I was not clear you can use the following link to help you solving your issue:
Creative Cloud Help | Manage your Creative Cloud for teams membership
If your not clear about this situation, contact with an agent of Adobe, by chat or phone. Use the following link to see the type of support you have on this matter:
http://adobe.com/getsupport
I think this will help you.
Regards

Can we start more than one user created database at the same time

Hi.,
Can we start/work more than one user created database at the same time ??
--Shyam

Hi Shyam,
I really dont understand what you have asked?
If your question is can we start more than one database at the same time then the answer to that is yes but provided to have enough resources on your server to support running of two or more different databases on the same machine.
Ex Senior DBA

Adobe Form used by more than one user simultaneously

Friends,
I am working on an online interactive Adobe form using Web Dynpro ABAP.
once the user enters the data and clicks the submit button, the data is sent to ztables.
the scenario is that more than one user can possibly use the same form simultaneously. in that case, how can i maintain synchronization ie how to avoid multiple users from using the form at the same time, when the form is already being filled by one user already.
I am guessing i have to do something with ADS for this.
Any thoughts or ideas would be greatly appreciated.
Thanks and Regards.

Hi Bertrand,
The purpose of allowing only one user is to ensure data consistency as you have guessed.
Is there a program name or transaction code where i can look up the lock entries and see if i can apply them to my web dynpro application or the adobe form.
I would greatly appreciate your help.
Thanks and Regards.

Load more than one user groups to system session variable GROUP from table

Similar Messages

Maybe you are looking for