Load multiple samples window in esx 24

in load multiple samples window in esx 24 in pro x its hard to see the folder where i am auditioning sounds because the display to add samples is so big and can't be adjusted…is there a way to adjust that window ….is there a better way to load samples ail

Sure you can do this. Open the exs edit window, create new instrument, load multiple samples (from the zone menu)

Similar Messages

I am having problems loading sampler patches into the exs24 sampler, when i got into edit menu and load multiple samples all the samples r greyed out and i cannot slect them, any help with this would be much appreciated

I am having problems loading sampler patches into the exs24 sampler, when i got into edit menu and load multiple samples all the samples r greyed out and i cannot slect them, any help with this would be much appreciated

It is very difficult to offer troubleshooting suggestions when the "os version" you are using is unknown as each os has their own troubleshooting solutions.
How large is your hard drive and how much hard drive space do you have left?

Firefox opens multiple blank windows while starting

Whenever I start Firefox, it loads multiple blank windows. It happens everytime I load it, though once in a while, it loads correctly i.e. loads the tabs which were open when I had closed it. Other than that, only plain windows which I have to close manually and then restore the last set of tabs from History>>Recently Closed Windows options. I have already set the following options to true to make the restore closed tabs feature working [as was suggested here in the forums]:
browser.tabs.warnOnClose
browser.warnOnQuit
browser.warnOnRestart
browser.showQuitWarning
Any fix for it?

If you use [[Clear Recent History]] to clear the 'Browsing History' when you close Firefox then restoring tabs from the last session ("Save & Quit" or "Show my windows and tabs from last time") doesn't work.
* http://kb.mozillazine.org/Session_Restore

EXS24 puts .exs after some instruments, refusing to load the samples?

With Logic 7.2.1, I'm using some SampleCell instruments that were originally imported into Logic 4.8 EXS24. Then, I moved that fully working EXS24 folder over to my new Mac.
Many of them play perfectly, and I can watch as the samples quickly load into the EXS24.
However, when I access some instruments from the menu, I get no error msg, but no samples are loaded - and ".exs" is appended after the instrument's name in the menu.
I'd think if it couldn't find the samples, it would ask me where to find them?
How can I resolve this?

ESX has Factory samples on your hard drive
and then the new instruments you create yourself.
If you truly have a User Instrument in ESX it should be under Edit(just to the right of the Instrument pane on ESX)/Instrument/Open.
If it is not there you might be screwed.
The only sure fix is create a new instrument (same Edit window) New/ Zone/ Import Multiple Samples/(Browse for the files) Add All/ Add/ will import the Samples into a new instrument then Instrument/ Save As...
Have Fun,
Remember she doesn't understand or care about your pain and She never will!

Out Of Memory Exception While Loading Images in Windows Phone 8 Silverlight App?

Hi,
I am developing a windows phone 8 silver light app , I am loading high resolution images from web through image control , After loading 2-3 images I am getting outof memory exception ,
I am unable to catch this , and I am unable to break this exception , Can anyone tell me how to handle this exception,
I am searching solution for this from last 15 days but I am unable to find solution,
I tried by setting the bitmap image source to null by doing this also I am getting exception, I tried by using gc.collect() also ..
First I am loading list of images in listbox with lowres of size 100X100 , in selection change event I am changing the image source ,
My image control code is
<Canvas Width="480" Height="720">
<Image Width="480" x:Name="MyImage" Height="720" Stretch="Uniform" >
<Image.Source>
<BitmapImage x:Name="MyImage1"/>
</Image.Source>
<toolkit:GestureService.GestureListener>
<toolkit:GestureListener Flick="GestureListener_Flick_1"
PinchStarted="OnPinchStarted" DragDelta="GestureListener_DragDelta"
PinchDelta="OnPinchDelta"/>
</toolkit:GestureService.GestureListener>
<Image.RenderTransform>
<CompositeTransform x:Name="myTransform"
ScaleX="1" ScaleY="1"
TranslateX="0" TranslateY="0"/>
</Image.RenderTransform>
</Image>
</Canvas>
My listbox selection changed code is
GC.Collect();
GC.WaitForPendingFinalizers();
Classes.PgaeInfo ob = listpages.SelectedItem as Classes.PgaeInfo;
progressLoad.Visibility = Visibility.Visible;
LayoutRoot.Opacity = 0.8;
LayoutRoot.IsHitTestVisible = false;
StackPanel st = sender as StackPanel;
index = ob.pId - 1;
JArray jsonArray = JArray.Parse(json);
JToken jsonArray_Item = jsonArray[index];
string sour = "xxx.xxx.xxx.jpeg" (only one image for sample)
img.Source = null;
DisposeImage(bm);
img.Source = new BitmapImage(new Uri(sour));
MyImage1.UriSource = null;
MyImage1.DecodePixelHeight = (int)img.Height;
MyImage1.DecodePixelWidth = (int)img.Width;
MyImage1.UriSource = new Uri(sour);
Any help..
thanks..
Suresh.M

Hello Suresh,
Are you loading multiple images at once on one page? If so this is an expected behavior. There is limited memory available per app so it's important to not load too large or too many photos at once in your app.
If possible you can try to convert your Windows Phone 8 to Window Phone 8.1 so as to take advantage of the FlipView control which is built to handle photo gallery-like applications.
Also you can always run the Windows Phone Application Analysis tool to check on the application performance and memory usage. This will help you test and fine tune your app accordingly.
Let me know if this helps.
Abdulwahab Suleiman

How to load multiple HTML5 canvas on the same page (the proper method)

Hi,
I've been struggling to load multiple canvas animations on the same page. At the beggining I thought that exporting the movies with different namespaces and reloading the libraries in a sequential flow might work, but it doesn't. It always loads just the last animation loaded. More info here: Coding challenge: what am I doing wrong?
Here is a sample of what I'm doing:
1st: Publish two flash movies with custom namespaces for "lib" set in the "publish settings": "libFirst" and "libSecond".
2nd: Edit the canvas tags in the HTML page. One called "firstCanvas" and the other one called "secondCanvas"
3rd: Edit the javascript like this:
        <script>
            // change the default namespace for the CreateJS libraries:
            var createjsFirst = createjsFirst||{};
            var createjs = createjsFirst;
        </script>
        <script src="//code.createjs.com/easeljs-0.7.1.min.js"></script>
        <script src="//code.createjs.com/tweenjs-0.5.1.min.js"></script>
        <script src="//code.createjs.com/movieclip-0.7.1.min.js"></script>
        <script src="{{assets}}/js/first.js"></script>
        <script>
            function initFirstAnimation() {
                var canvas, stage, exportRoot;
                canvas = document.getElementById("firstCanvas");
                exportRoot = new libFirst.first();
                stage = new createjsFirst.Stage(canvas);
                stage.addChild(exportRoot);
                stage.update();
                createjsFirst.Ticker.setFPS(libFirst.properties.fps);
                createjsFirst.Ticker.addEventListener("tick", stage);
        </script>
        <script>
            // change the default namespace for the CreateJS libraries:
            var createjsSecond = createjsSecond||{};
            var createjs = createjsSecond;
        </script>
        <script src="//code.createjs.com/easeljs-0.7.1.min.js"></script>
        <script src="//code.createjs.com/tweenjs-0.5.1.min.js"></script>
        <script src="//code.createjs.com/movieclip-0.7.1.min.js"></script>
        <script src="{{assets}}/js/second.js"></script>
        <script>
            function initSecondAnimation() {
                var canvas, stage, exportRoot;
                canvas = document.getElementById("secondCanvas");
                exportRoot = new libSecond.second();
                stage = new createjsSecond.Stage(canvas);
                stage.addChild(exportRoot);
                stage.update();
                createjsSecond.Ticker.setFPS(libSecond.properties.fps);
                createjsSecond.Ticker.addEventListener("tick", stage);
        </script>
<body onload="initFirstAnimation(); initSecondAnimation();">
Could someone please reply with the best practice on how to do this? If possible, without the need to reload all the libraries...
If I only need to show one flash movie at a time, would it be more efficient to cut & paste the canvas tag using jQuery in the DOM and reloading a different lib on it?
Many thanks!
#flash #reborn

I was able to fix it. At the end, it was easier than I thought. Just have to publish using a different "lib" namespace for each movie, load all the scripts at the end of the <body> and then add the following to the onload or ready events:
$(document).ready(function () {
        var canvas, stage, exportRoot;
        // First movie
        canvas = document.getElementById("firstCanvas");
        exportRoot = new libFirst.first();
        stage = new createjs.Stage(canvas);
        stage.addChild(exportRoot);
        stage.update();
        createjs.Ticker.setFPS(libFirst.properties.fps);
        createjs.Ticker.addEventListener("tick", stage);
        // Second movie
        canvas = document.getElementById("secondCanvas");
        exportRoot = new libSecond.second();
        stage = new createjs.Stage(canvas);
        stage.addChild(exportRoot);
        stage.update();
        createjs.Ticker.setFPS(libSecond.properties.fps);
        createjs.Ticker.addEventListener("tick", stage);
        // Third movie
        canvas = dument.getElementById("thirdCanvas");
        exportRoot = new libThird.third();
        stage = new createjs.Stage(canvas);
        stage.addChild(exportRoot);
        stage.update();
        createjs.Ticker.setFPS(libThird.properties.fps);
        createjs.Ticker.addEventListener("tick", stage);

Load multiple files using the same data load location

has anybody tried loading multiple files using the same load locations. I need to do this as the data in these multiple files will need to be exported from FDM as a single export file. the problem i am facing is more user related. since these files will be received at different points of time, users will need a way to tell them what has been loaded and what is yet to be loaded.
is it possible to throw a window on the web broser with OK and Cancel buttons from an event script?
any pointers to possible solutions will be helpful

was able to resolve this. the implementation method is as follows
take a back up of previously imported data in the befcleardata event script. then in the beffileimport event append the data to the import file. there are many other intricacies but this is the broad implementation logic. it allowed my users to load multiple files without worrying about append or replace import type choices

Loading multiple physical records into a logical record

Hello,
I'm not sure if this is the right place to post this thread.
I have to import data from a fixed length positioned text file into a oracle table using sql loader.
My sample input file (which has 3 columns) looks like:
Col1 Col2 Col3
1 A abcdefgh
1 A ijklmnop
1 A pqrstuv
1 B abcdefgh
1 B ijklmn
2 A abcdefgh
3 C hello
3 C world
The above text file should be loaded into the table as:
Col1 Col2 Col3
1 A abcdefghijklmnpqrstuv
1 B abcdefghijklmn
2 A abcdefgh
3 C helloworld
My question: Is there a way tht i can use the logic of loading multiple physical records into a logical record in my oracle tables. Please suggest.
Thanks in advance.

Hi,
user1049091 wrote:
Kulash,
Thanks for your reply.
The order of the concatenated strings is important as the whole text is split into several physical records in the flat file and has to be combined into 1 record in Oracle table.
My scenario is we get these fixed length input files from mainframes on a daily basis and this data needs to be loaded into a oracle table for reporting purpose. It needs to be automated.
Am still confused whether to use external table or a staging table using sql loader. Please advise with more clarity as am a beginner in sql loader. Thanks.I still think an external table would be better.
You can create the external table like this:
CREATE TABLE     fubar_external
(      col1     NUMBER (2)
,      col2     VARCHAR2 (2)
,      col3     VARCHAR2 (50)
ORGANIZATION EXTERNAL
(       TYPE             ORACLE_LOADER
     DEFAULT DIRECTORY XYZ_DIR
     ACCESS PARAMETERS (
                             RECORDS DELIMITED BY     NEWLINE
                      FIELDS (   col1        POSITION (1:2)
                                  ,   col2        POSITION (3:4)
                           ,   col3        POSITION (5:54)
     LOCATION        ('fubar.txt')
);where XYZ_DIR is the Oracle Directory on the database server's file system, and fubar.txt is the name of the file on that directory. Every day, when you get new data, just overwrite fubar.txt. Whenever you query the table, Oracle will read the file that's currently on that directory. You don't have to drop and re-create the table every day.
Note that the way you specify the columns is similar to how you do it in SQL*Loader, but the SEQUENCE generator doesn't work in external files; use ROWNUM instead.
Do you need to populate a table with the concatenated col3's, or do you just need to display them in a query?
Either way, you can reference the external table the same way you would reference a regular, internal table.

After updating firefox today to 6.0, firefox is unable to load multiple tabs at the same time. When I try, firefox refuses to load any pages, and instead is stuck trying to connect to each page.

After I updated firefox to 6.0 today firefox has developed a problem loading multiple tabs. When I try to load 10+ tabs, either at the same time or by opening each tab separately, each tab is stuck trying to connect to the desired page. This continues if I close all the tabs and try to load a single page, the single page is unable to get pass connecting. In order to load a new page when this situation arises I must close down firefox and start again, and the program has no history of the previous session.

Other solutions
* https://support.mozilla.com/en-US/kb/Basic%20Troubleshooting#w_other-solutions
Do a MALWARE check with these Malware Scanning programs. You need to scan with all programs because each program detects different malware. Make sure that you UPDATE each program to get the latest version of their databases before doing a scan.
* Malwarebytes' Anti-Malware - http://www.malwarebytes.org/mbam.php
* SuperAntispyware - http://www.superantispyware.com/
* Windows Defender Home Page -
http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
* Spybot Search & Destroy - http://www.safer-networking.org/en/index.html
* Ad-Aware Free - http://www.lavasoft.com/products/ad_aware_free.php
There are also specialized forums for Malware Removal such as those listed below, where you might be able to get more help:
* Bleeping Computer Forums - http://www.bleepingcomputer.com/forums/
* Spyware Warrior Forums - http://www.spywarewarrior.com/index.php
* SWI Forums - http://www.spywareinfoforum.com/
Check and tell if its working.

FCPX 10.0.7 hangs when loading multiple projects - a non-destructive work around

FCPX 10.0.7 hangs when loading multiple projects - a non-destructive work around....
Hi Guys, I upgraded from FCPX 10.0.6 to 10.0.78 and discovered to my immense frustration that many of my 100+ FCPX projects would not load.
Symptom:
FCPX 10.0.7 appears to hang ("spinning beachball") with either high CPU% on a single core or with 1-2% CPU busy (activity monitor.app) when a FINAL CUT PROJECT is selected. No logs error information in /var/logs ..hmm
notices that the "status circle" spins around endlessly.
Actvity Monitor.app shows "Final Cut Pro (Not Responding)
and also I notice in some cases that an OEM filter ("NEAT VIDEO NOISE REDUCTION") is in progress to be loaded. FCPX V10.0.7 must be FORCED QUITtted to remove it from system.
History: Upgraded FCPX from V10.0.6 to V10.0.07.
"FINAL CUT EVENTS" and "FINAL CUT PROJECTS" on a single file system on SAS 16TB disk array (768MB/sec read via AJA system test) and 60% utilised capacity… FCP EVENTS has 400 events in it .. some 5.2TB of Prores essence etc .. all works fine! (i.e. the storage system is first class and is NOT the issue)
32GB of RAM on MAC PRO 2009 Nehalem 16 x Vcore with ATI 5780 card and ATTO HBA's (i.e. plenty of resources!)
As usual with any "upgrade" to FCPX 10.0.? all the EVENT objects need to be upgraded. In my case this takes an hour or two.. so I do that when asleep.
After experiencing above, I restored the FCPX EVENTS LIbrary of that file system from LTO4 tape archive (BRU-PE ) and still had the same issues as above.
WORKAROUND:
FORCEd QUIT FCPX V10.0.7
RENAMEd "/volumes/some_file_system_volume/Final Cut Projects" to "/volumes/some_file_system_volume/Final Cut Projects_original"
created (make) a new "/volumes/some_file_system_volume/Final Cut Projects" (use finder)
For each project !!! in "/volumes/some_file_system_volume/Final Cut Projects_original", (do one project at a time!!!)
MOVE "/volumes/some_file_system_volume/Final Cut Projects_original/one_fcpx_projext_nnnn_folder" to "/volumes/some_file_system_volume/Final Cut Projects"
Make sure you move ONLY one project at a time. If you have a subfolder of projects, please do each project one at a time (serially!)
Launch FCPX V10.0.7 and BE PATIENT!!! .. DONT click or fiddle with the UI.. it seems when you intervene it locks up as well…
Let FCPX V10.0.7 settle….
select the project you just added above and RELINK any objects it needs. Thumbnails and proxies will be rendered again.. just be patient
wait until ALL the rendering as stopped.
QUIT FCPX V10.0.7
(now if FCPX locks up, just force it out and start again as above).
repeat for all projects in "/volumes/some_file_system_volume/Final Cut Projects_original" (go to step 4 ad do until all projects moved)
When all is COMPLETED MAKE SURE YOU ARCHIVE an instance (or make a backup ) of "/volumes/some_file_system_volume/Final Cut Projects"
If this procedure has worked the folder "/volumes/some_file_system_volume/Final Cut Projects_original" will have zero (nill, none) projects in it.
I have managed to restore ALL my "/volumes/some_file_system_volume/Final Cut Projects" this xmas between drinking etc. I'm satisfied that its all ok.
Other issues:
use DISK WARRIOR or TT PRO 6 to make sure that the file system volume where your "/volumes/some_file_system_volume/Final Cut Projects" are is physically ok. I noticed some entries in file system's volume table that represented objects in "/volumes/some_file_system_volume/Final Cut Projects" were at fault when I used these utilities… FWIW.
SUMMARY: yes this took ages to d, however luckily I had everything in at least 3 instances in an archive which has saved me many time in the old FCP& and prior days… it was just a matter of time to put it back together.
I put this outage down to may be my own impatience when I first fired up FCPX 10.0.7 after the upgrade.
I'm interested if this workaround is helpful to others and in addtiion if others have a more satisfactory remedy.
HTH
warwick
Hong Kong

Hi Eb, yeah I could not see any "memory leak" or unusual consumption of REAL memory whose less availability would cause excessive PAGEing and SWAPping as seen in the Activty Monitor.app
I watch this carefully especially the use of REAL MEMORY by 3rd Paryy apps. BTW there are a few that cause ALLOCATED but NOT USED memory (blue in the A.M.app UI). Simply a unix PURGE command can release that memory and help clean up the PAGE and VM swap files (its alleged!).
Yes, you may be might with the element of "Luck" involved. I would add though, that having MULTIPLE project displaying in the STORYLINE window and loading always caused my FCP 10.0.7 jam up at startup with h symtoms and observations I described.
TIP: I might also add that for a super speedy launch of FCPX one may also emply setting each PROJECT's UI to show only AUDIO thus negating the need to contstruct or reneder out a PREVIEW ui in each clip in the storyline.
Your/Apples suggestion of the movememt (rename) of "Final Cut Pro Projects" to "Final Cut Pro Projects Hidden" is similar to what I proposed above to stop FCPX 10.0.7 accessing and building it up at startup. This workaround has been useful inthe past as well.
ALso one might also get the stick out and remove (delete/rm) the ~/Library/Saved Application State/com.apple.FinalCut.savedState in one's home ~/Library so that FCPX wont do such a neat job reinstating FCPX last time you crashed it... This has been helpful also in diagnosing my issues.
Lastly I have noticed that:
impatience clicking on the FCPX UI when in the unstable state causes it to lock up with NO visible CPU% busy.... as if its waiting on something which is usually me MEMTERMing it via FORCE QUIT and
the projects where I have employed the NEAT VIDEO Noise Reduction OEM filter for FCPX seem to exasserbate the PROJECT loading issues when several PROJECTS are available at FCPX startup time.
As of yesterday I have some 400+ EVENTS Final Cut Pro Events and 130+ projects of varying compexites in a single file system on Final Cut Pro Projects all working fine and as good as gold again!
Oh and one more thing, I had to RE-RENDER many projects of them again... strange as the FCP PROJECT library was renstated from a recent LTO archive as of V10.0.6 FCPX.. strange that...I would have expected if the projects and events were 10.0.6/7 compatable as proposed by Tom, that this would not be necessary... hmm straneg that
I'll monitor this thread.
Thanks for your comments lads!

SQL Loader to Load Multiple Tables from Multiple Files

Hi
I wish to create a control file to load multiple tables from multiple files
viz.Emp.dat into emp table and Dept.dat into Dept table and so on
How could I do it?
Can I create a control file like this:
OPTIONS(DIRECT=TRUE,
SKIP_UNUSABLE_INDEXES=TRUE,
SKIP_INDEX_MAINTENANCE=TRUE)
UNRECOVERABLE
LOAD DATA
INFILE 'EMP.dat'
INFILE 'DEPT.dat'
INTO TABLE emp TRUNCATE
FIELDS TERMINATED BY "|" OPTIONALLY ENCLOSED BY '"'
(empno,
ename,
deptno)
INTO TABLE dept TRUNCATE
FIELDS TERMINATED BY "|" OPTIONALLY ENCLOSED BY '"'
(deptno,
dname,
dloc)
Appreciate a Quick Reply
mailto:[email protected]

Which operating system? ("Command Prompt" sounds like Windows)
UNIX/Linux: a shell script with multiple calls to sqlldr run in the background with "&" (and possibly nohup)
Windows: A batch file using "start" to launch multiple copies of sqlldr.
http://www.pctools.com/forum/showthread.php?42285-background-a-process-in-batch-%28W2K%29
http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/start.mspx?mfr=true
Edited by: Brian Bontrager on May 31, 2013 4:04 PM

Why can't I load some samples into Logic's EXS24??

Hi everyone,
I am having an issue with loading some of my samples into the EXS24. I am using OSX 10.3.9 and Logic 7.1.0. When I try to load a sample, I can see that it recognizes it, yet when I click on it the sample doesn't load. It doesn't even try to load, It just shows blank dots in the loading window. Can anyone help me with this? I have to have this to work for my job. Thanks so much for the input!
-Matt

When you say you are loading a sample, I presume you are not trying to load a sample using the EXS24?
If you are, you should read the EXS24 manual, because that is not how it works - the EXS24 directly loads "sampler instrument" files only, and it's those that contain references to all the sample files.
So you open the EXS editor, create a new instrument, load your samples into that, save it, and then select your instrument in the EXS24. Long-winded, but that's how it works.
Or did you mean something else?

Trying to load the sample plugin snippetRunner but it's not getting loaded

I tried to load the sample pluggin SniipetRunner and open Indesign.
Indesign opened successfully and is showing other plug-ins in the plug-in drop down but now SnippetRunner
any idea?

I had the same problem. The SnippetRunner can be found under "Window" in the top menu bar. A screenshot can be seen here: http://stackoverflow.com/questions/23214516/indesign-sdk-sample-plugin-not-working/2323971 5#23239715

Youtube seems to load multiple times, audio works, no video

Youtube works on IE. In Firefox it seems to load multiple copies. The time bar at the bottom has many segments. The audio works, but no video. I disabled Flashblock, does not help.

I have the same problem, with vista, on an intel iMac.
I tried uninstalling the driver, restarting, and then bootcamp automatically reinstalls the driver, but that didn't fix it. The driver is there and everything appears to be as it should but just no sound comes out unless I set headphones to the default, in which case the audio is way too quiet.
I'm trying to repair my bootcamp install from my leopard disk but I got an error code 2727 and couldn't even attempt to try fixing the issue that way.
It's so annoying, because I'm trying to play starcraft ii, which is impossible macside because mac os insists upon having ridiculous mouse acceleration. I managed campaign macside but now it's time for some serious competitive play and I just need to do this on windows, but no sound.

Firefox 4.01 with multiple tabs/windows open will close with the following dialoog boxes appearing, one for each window, evidently, "invalid preferences extensions.bprivacy.timer check that is listed in defaults/prefs.js"

The cause of the need to revert to the last known good operating condition was trying to download a file from a Yahoo discussion group. The download froze the machine. When Firefox was restarted, it froze on loading, at first step of loading multiple windows and tabs. Many reboots to the same frozen state led to revert to the last restore point. That produced equivalent results on startup of Firefox, the option of F8 and revert to last known good operating condition was done. Everything seemingly operate OK, with the exception of the pop-up dialog boxes on shutdown of Firefox .
Began Thursday 5/26/11
I know locations and dates of all files "prefs.js" but don't know what to do with them, if anything.

I removed add-on BetterPrivacy. No problems since then anymore.
Regards,
HABSBURGER

Load multiple samples window in esx 24

Similar Messages

Maybe you are looking for