Load multiple Units of Measures using RMDATIND in LSMW

Hi All,
   I have created a conversion for materials using LSMW. I have used the standard direct input
   program    RMDATIND.
   Requirements have changed considerably over a period of time and now the new one is that I need to
   load multiple alternate units of measure for each material.
   The issue when using RMDATIND is that the structure BMMH6 for alternate units can hold only 1
   record at a time and my one single legacy source record has the information for two alternate units of
   measure.
   The LSMW that I created cannot handle this right now as it can load only one Unit of Measure as
   BMMH6 can hold only one record.
   Is this a limitation or is there a workaround/solution for this issue of mine in LSMW while using <br />
   RMDATIND.
   I will greatly appreciate any useful inputs in this regard.
Thanks,
Vamsee

for this use LSMW BAPI method
Business Object      BUS1001006   Standard material
Method               SAVEDATA                    Create and change ma
Message Type         MATMAS_BAPI                 Create and change ma
Basic Type           MATMAS_BAPI02               Create and Change Ma
in this method you habe below strctures...
E1BP_MARM       Units of Measure
E1BP_MARMX      Checkbox Structure for BAPI_MARM

Similar Messages

Multiple Unit of Measure in SAP BO

We have a requirement to use multiple unit of measures from one of our client whose business concern is manufacturing and tenneries.
We want to measure inventory in units and in meters at same time. For example, if one new unit measuring 50 metres is received in warehouse then it should be measured in units as well as in metres. If the last quantity in warehouse was 50 pcs with 600 metres then after the one unit addition it should update the inventory to 51 pcs with 650 metres.
Is there a solution or way we can use SAP BO with multiple UOM.

Hi,
In B1 8.8, you can use multiple unit of measure but it will be displayed in the sales marketing document and purchase document.
The stock UOM can't be managed by multiple UOM.
When you see field UOM in the item master data --> inventory tab, you can only enter one UOM there.
In the document level, you can maintain multiple UOM for the item or inventory. If you have defined the conversion of the UOM, it will be automatically calculated.
Rgds,
JImM

Create Characteristic with multiple units of measure

Hello Friends,
I want to create characteristic (CT04) which has multiple units of measure. At present a Characteristic is created with a single unit of Measure. I have to create characeristic and assign it in MIC. MIC specifications are customer dependent. Customer may give specifications in different unit of measure. While creating sales order, I am entering the specifications for characteristics, as material is created with varient.
I am creating Single Characteristic multiple times for different Unit of Measure and assigning it to the class.
Therefore according to the Customer requirment and his specifed Unit of Measure, that Characteristic is choosen having same UoM as of Customer.
Insead of doing this, Is it possible to assign multiple units of measure to single characteristic?
Waitng for reply!
Regards,
Kiran

Hi,
With Multiple Unit Of measures, I don't think its possible.
You can Use CHAR for characteristics, to Use.
Instead for Fixed Units. Let Marketing/sales Enter the req.
But you shall make it Multiple Selection, Since you can use them in Selection Condition.
Hope this is Useful.
Regards
Raghu

Create characteristc with multiple units of measure

Hello Friends,
I want to create characteristic (CT04) which has multiple units of measure. At present a Characteristic is created with a single unit of Measure. I have to create characeristic and assign it in MIC. MIC specifications are customer dependent. Customer may give specifications in different unit of measure. While creating sales order, I am entering the specifications for characteristics, as material is created with varient.
I am creating Single Characteristic multiple times for different Unit of Measure and assigning it to the class.
Therefore according to the Customer requirment and his specifed Unit of Measure, that Characteristic is choosen having same UoM as of Customer.
Insead of doing this, Is it possible to assign multiple units of measure to single characteristic?
Waitng for reply!
Regards,
Kiran

Hi,
With Multiple Unit Of measures, I don't think its possible.
You can Use CHAR for characteristics, to Use.
Instead for Fixed Units. Let Marketing/sales Enter the req.
But you shall make it Multiple Selection, Since you can use them in Selection Condition.
Hope this is Useful.
Regards
Raghu

Multiple Units of Measurements for a single item

Hi all,
How do I maintain multiple units of measurements for a single Item/ I have a scenario where purchase orders are being made for sand in Metric Tons, Tons, Kgs and Cubit Feets. Each measurement is being used at each construction site of the company but the item is single sand. One more problem is here with the material reconciliation of stock since it is maintained in different units of measurement and conversion from unit to other is problematic.
Thanks
YSvee Reddy

Hi YSvee Reddy ,
Julie is correct in saying that this feature will be available in version 8.8, currently in Ramp-up.
Please see the [8.8 landing page |https://websmp203.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000705857&_SCENARIO=01100035870000000183&_ADDINC=011000358700001192682007E&]for a link to the 'What's new' document.
You can contact your LPE to discuss participation in Ramp-up.
All the best,
Kerstin

$CL - Create Characteristic with multiple Unit of Measure

Hello Friends,
I want to create characteristic (CT04) which has multiple units of measure. At present a Characteristic is created with a single unit of Measure. I have to create characeristic and assign it in MIC. MIC specifications are customer dependent. Customer may give specifications in different unit of measure. While creating sales order, I am entering the specifications for characteristics, as material is created with varient.
I am creating Single Characteristic multiple times for different Unit of Measure and assigning it to the class.
Therefore according to the Customer requirment and his specifed Unit of Measure, that Characteristic is choosen having same UoM as of Customer.
Insead of doing this, Is it possible to assign multiple units of measure to single characteristic?
Waitng for reply!
Regards,
Kiran

What UOM's are we talking about?
Are you talking about ppm vs. %? Or ppm vs. ppb?
SAP can make some of these conversion automatically. I encourage clients to standardize what their lab people report on in inspection lots. I.e. they should always record ppm or always record % in the inspection lots.
In the certificates you can use the certificate profile to change the UOM actually reported on the COA to the customer. So you can record by ppm in the lab, but in the cert for the characteristic, you indicate that it should be reported in %. The system will automatically make this conversion for you.
If you are talking somethign like screens, I recommend doing all in the lab as either thru or on and doing calculated characterisitcs to calculate the opposite for those customers that want thru instead of on, or vice versa.
FF

Price by multiple unit of measure

I have a requirement to price in multiple units of measure for the same material number. For example material # 12345
1 Box = $500
1 Ea = $1.50
1 Box = 500 ea
Customer orders 501 each of material 12345 on one line item of the sales order. Requirement is to price at $501.50 not $501.00
I have tried to use condition supplements without success. Does anyone have suggestions without using pricing requirements or forumals of how this requirement can be met?

hello, atul and friends.
i think interval pricing alone may not be enough, but definitely it could be part of the solution. (ms. gina, please confirm if i understood the requirement correctly)
let's say the customer orders 999 units, which will translate to 1 box and 499 loose units. the pricing will be something like:
$1 per unit times 999 units = $999.00
$0.10 per unit times 499 units loose = $49.90
total should be $ $1048.90
however, if order is 1000 units, pricing will be:
$500 time 2 boxes = $1000.00
so, the "surcharge" of $0.10 applies only to the loose units. but in the order, the quantity is entered either in boxes or units. the challenge is to create condition records that recognize this packing/grouping option. interval pricing must be supported by a feature that can recognize capacity.
regards!
Edited by: jonathan y on Jun 4, 2009 2:14 PM
Edited by: jonathan y on Jun 4, 2009 2:15 PM

Multiple units of measure (UoM) inventory 8.8

Anybody have any documentation on the multiple units of measure feature in 8.8. I have done the delta training but I can't see it in the current version I have installed (PL09).
Do I have to update to PL10 to get this feature? Does it not exist anymore? Or am I missing something?
Thanks in advance,
Mike

Thank you for trying to help but unfortunately you are all not exactly correct on this...
I spoke to SAP and the functionality described in the 8.8 Delta video using strawberries as an example is misleading.
The new feature allows you to change Items Per Purchase Unit / Items Per Sales Unit on the document dynamically even if there are transactions to the item.
2007 and below locked the items per purchase / items per sales unit after a single transaction.
So the setup for this is NOT in the item master data it is a field called Items Per Unit in the marketing documents. The items per unit becomes the default but you can modify it for each document dynamically.
I made a simple dropdown list UDF and an FMS that allowed me to select different lengths and whatnot. And the FMS would input the correct conversion rate into the Items Per Unit field.
So for a purchasing (in this case a purchase order) example we store this particular unit in metric tonnes but we occasionally buy it in 25kg bags / 2200kg totes, etc. For the 25kg bags each bag would be 0.025 metric tonnes (mt). So when the dropdown says 25kg bag, the FMS inputs 0.025 in the items per unit field. Then when we say 100 bags, it would put them into inventory at 100 (qty) * 0.025 (items per unit) = 2.5 mt. In this case we inventory the item in metric tonnes and sell it in metric tonnes so it's a simple example only on the purchase side.
The only caveat to this is that the price doesn't dynamically change with the items per unit, but you could either make an FMS for that as well, or simply type it in manually.
This is for 8.8 ONLY not 2007.
There is no real documentation or training on this currently but I have confirmed this with SAP and used it in the system.
Hope this helps,
Mike
Edited by: Mike Taylor on May 6, 2010 5:58 PM

Need Multiple Units of Measure for a given material due to multiple vendors

Hello,
We have a requirement where we must have multiple units of measue (each, box, case, pallet) for a given material.
Background:
We have multiple vendors for one SAP material number. We need to store 4 levels of units of measure for each vendor+material combination.
Unit of Meaure levels
1. Each
2. Innerpack (ex: 12 each = 1 innerpack)
3. Box (ex: 36 eaches = 1 box)
4. Pallet (ex: 100 eaches = 1 pallet)
Standard SAP allows in MM01 additional data --> Units of Measure only 1 Ea, Box, Plt, etc.
Our requirement is to allow multiple Units of Measure due to multiple vendors providing the same material.
So, our unique combination is by a Material+Vendor.
We are considering adding the vendor name and vendor number to the material master --> additional data --> Units of Measure tab.
Does this seem like a good solution? What impacts do you foresee with approach?
Any alternatve solutions?
We thought we could enhance the purchasing info records to allow multiple units of measure too but then we need to also add many fields to hold the weight, lenght, height, width, volume, country of origin, etc.
Please recommend a best practice or solution to handle this requirement.
Thanks in advance!!!

Hi,
Maintain the alternative units in Material Master in Additional Data -> Units of Measure section with proper conversion factors.
Create individual info-records i.e. per mtl-vendor combination & in the info-record maintain the order unit, along with other details as required.
Now when you create a PO, the details will be read from the info-record. To test the same, create them in your sandbox & see if it meets your requirement.
Hope the above clarifies your query.
Regards,
Vivek

Mass upload of Alternative unit of measure using MASS

Hi All,
Can some one guide me how to upload alternative unit of measure using MASS Transaction - can you elaborate like fields to be considered also, as I am trying using MM17 but could not go further.
Thanks,
Vengal Rao.

it is possible to create alternative units using MM17. But I would not use the word upload in that matter, as you cannot upload from an external file.
start MM17-
select table MARM and execute
you see 2 tabs,
you are at the Change record tab, please set indicator for do not change existing data, then go to the creation tab
enter the material number and the alternative unit you want add .
then execute
Now you see your material number, the new unit and the material description
click the icon for field selection and add the field nominator and denominator (and all other fields where you usually enter data) to your shown fields.
enter the value of your choice and save.
if you want add the same value for nominator and denominator to all the materials listed, then enter the value in the fields that are listed above the listed materials. then click the header title above all fields that shall be distributed followed by the mass change button. Finally press save button.

Unable to load multiple files to Essbase using MaxL and wildcards

I have multiple data files to load:
Files:
Filename.txt
Filename_1.txt
Filename_2.txt
According to the following link, Essbase is able to load multiple files to BSO databases via MaxL by using wildcards:
http://docs.oracle.com/cd/E17236_01/epm.1112/esb_tech_ref/frameset.htm?launch.html
However, when I try to run the following I receive the following error:
MaxL:
import database MyApp.DB data from server text data_file "../../MyApp/Filename*.txt" using server rules_file "L_MyRule" on error append to "\\Server\Folder\L_MyRule.err";
Error:
ERROR - 1003027 - Unable to open file [DB01/oracleEPM/user_projects/epmsystem2/EssbaseServer/essbaseserver1/app/MyApp/DB/../../Filename*.txt].
ERROR - 1241101 - Unexpected Essbase error 1003027.
I can run the following fine without any problem, but this only deals with the first of several files, and I’d rather not hard-code multiple files since the number might vary in the future:
MaxL:
import database MyApp.DB data from server text data_file "../../MyApp/Filename.txt" using server rules_file "L_MyRule" on error append to "\\Server\Folder\L_MyRule.err";
Any ideas? And how about ASO databases?

JamesD wrote:
According to the following link, Essbase is able to load multiple files to BSO databases via MaxL by using wildcards:
http://docs.oracle.com/cd/E17236_01/epm.1112/esb_tech_ref/frameset.htm?launch.html
That is the tech ref for 11.1.2.2, are you on 11.1.2.2?
Import Data
11.1.2.2 - http://docs.oracle.com/cd/E17236_01/epm.1112/esb_tech_ref/frameset.htm?maxl_imp_data.html
11.1.2.1 - http://docs.oracle.com/cd/E17236_01/epm.1112/esb_tech_ref_1112100/frameset.htm?maxl_imp_data.html
Cheers
John
http://john-goodwin.blogspot.com/

No transfer of Unit of Measure using L_TO_CREATE_DN.

Hi everybody,
I have the following problem: when I create a TO using LT03, I can enter a unit of measure like PLG for example. When the TO is created, SAP determines that it is in fact 20 COLL (1 PLG <-> 20 COLL), determines the correct batches etc etc and creates the TO. When I look at the TO I can see that I entered 1 PLG.
Now we are getting to the problem: when I try to create the TO with fm L_to_create_dn, I can enter the 1 PLG like mentioned before in structure it_delit (anfme and altme), but, the final TO that is created, only contains the recalculated amount of 20 COLL. I can't find the fact that I entered 1 PLG!
Why this kind of behaviour when I use the fm?
The funcional consultants can't find it in customizing.
Any hints or tips?
Cheers and thanks!
Laurens

The problem with using an isolated FM like this is that you don't know if there are FMs that should run before or after it to do other processing. If you look at BAPI_WHSE_TO_CREATE_STOCK, I think you'll see what I mean. A comment in this BAPI says not to use it, so please don't. I think your options are BDC or call transaction.
Rob

Regarding Updating Unit of Measure using Recording

Hi all,
I have a requirement where I need to update the Unit of Measure values in the transaction MM02 using recording procedure.
But I am getting problem with table control, if we have more than 11 values we need to use page down which is not working in recording.
Can anyone please suggest me how to resolve this issue???
Regards
Haritha

Hi Haritha,
do like this(this example is just for your reference)
    IF lv_line > '11'.
      PERFORM bdc_dynpro      USING 'SAPLCOIH' '3000'.
      PERFORM bdc_field       USING 'BDC_OKCODE'
                                    '=P+'.
      PERFORM bdc_dynpro      USING 'SAPLCOIH' '3000'.
      PERFORM bdc_field       USING 'BDC_OKCODE'
                                    '=ENT1'.
      PERFORM bdc_field       USING 'BDC_CURSOR'
                                    'RESBD-VORNR(02)'.
      lv_line = '02'.
    ENDIF.
<b>Reward points for helpful answers</b>
Satish

Multiple units of measure

Dear all MM experts,
I have one semi finished goods which having two units of measure.I m giving one example as per the client business process.
One artificial cubicle stone is being manufactured of weight 8.00 metric tonnes. In one production order @ 20 stones are
manufactured. When the production gets completed, the weight cannot be same for each stone. It is like 7.9 tonnes,8.1 Tonnes.7.96 tonnes,7.5 Tonnes and so on. means all 20 stones have different weight.
Now in this case if i decide to keep base unti of measure for stone is "each", then where should i take the "weight" factor? as
for stones, two units of measure are given one is "each" and another is "tonnes" in client excel system.
and moreover the another measurement i.e. length,breadth,and height are also mentioned for the cubic stones after manufacturing , so during GR after production how will i make all these entries like each,tonnes,length,breadth and height on single SAP screen? what should be my base unit of measure in this case? Client also want the stock report of all these measurement factors.
please guide me how to map this process?

Hi Ravi,
This is already addressed by SAP .This functionality is called Batch specific unit of materials .kindly go through the following blog which will give you step by step guide to configure the same. Material code will be 1 but each piece will be treated as Batch and each will have different weight.
/people/raja.ramasamy/blog/2010/02/22/batch-specific-units-of-measure-step-by-step-configuration-for-steel-industry
Regards
Raja

Multiple Unit of Measure (No Fix Conversion Formula)

Dear All,
Cilnet has given me requirement to book the sales document for the particualr product in unit of mesure 'Nos/PC', and the stock is maintained in Base Unit of Measure 'Qtl' (100 Kg = 1 Qtl). Price is also applicable or calculated on the basis of QTL but there is no fix conversion formula of 1 PC = How Many QTL.
Please guide me on this point.
Regards
Rahul

Hi,
I was facing the same Problem ,well for this you need to define a character and associate the same to a Class .
And Finally need to assign Combination of these to material in material master classification view.
Define Charter :
http://wiki.sdn.sap.com/wiki/display/PLM/Howtocreateacharacteristic
Assign the Char to Class :
Tcode : CL02
Under Char Tab Give the Charcter Name and Place "S" in Org. Area.
Thanks.
Edited by: C.Ankit on Mar 7, 2012 8:18 AM
Edited by: C.Ankit on Mar 7, 2012 8:18 AM

Load multiple Units of Measures using RMDATIND in LSMW

Similar Messages

Maybe you are looking for