Load Options for Edit Sub Step

Hi Ppl,
I have created a custom step type which has a edit sub step with LabVIEW adapter. When invoke the edit sub step for the first time, it takes a while to load the edit sub step and there is a noticebale delay for the first time. I want the edit sub step module to be loaded when TestStand is open or when the sequence file is open. I was not able to locate any location where we can specify the load and unload options of the edit sub step. Is there any way to do this ?
Thanks,
Sathish

This is probably because of the launching of LabVIEW development system.
Have you tried setting the Load option for the SequenceFile to 'Preload when opening sequence file'
Regards
Ray Farmer

Similar Messages

I have just transferred my iTunes library from a hard drive previously connected to a windows laptop to a MacBook Pro and now all my options for editing info are greyed out. I have seen the answers if still using windows but could find a similar situation

I have just transferred my iTunes library from a hard drive previously connected to a windows laptop to a MacBook Pro and now all my options for editing info are greyed out. I have seen the answers if still using windows but could find a similar situation to this one.

Eels290776 wrote:
if my external hard drive is not connected to either of my machines, and I download something onto my iMac and then something different onto my Macbook, where are my machines going to be storing the new downloaded media
when the drive is not connected, +iTunes media folder location+ will default back to <MacintoshHD>/users/<yourname>/music/iTunes/iTunes music (or media)
and when I next connect the external hard drive how will I easily get the newly downloaded media onto the external HD
you'd have to point +iTunes media folder location+ back to the external via preferences > advanced > iTunes media folder location, then file > library, organize library > consolidate files
and essentially, to have it easily readable on both machines?
in that case it might be best to copy the entire iTunes folder to the external. then, on each machine, launch iTunes while pressing option on your keyboard. when prompted, click on +choose library+ and navigate to the iTunes folder on the external.
note only one iTunes can access the iTunes library @ a time !
also, make sure the external is mounted on either machine before launching iTunes.
JGG

BC IN-Browser Editor not loading pages for editing.

Hi,
From Bc admin I click the edit button to open in browser editing.
The editor opens and the index page loads and is editable.
When I click the link to the about page (example) or any other page the page loads fine but none of the editable regions are visible.
If I look in my browser address bar I see that although I am viewing the about page the address is still showing the index page. If I manually update this to about.html the browser then navigates to the about page and I am able to use the in browser editing options.
I have another site in BC whiere the in browser editing works fine, each page is editable from clicking the menu link. So I feel this is an issue parculiar to this site but I cant see the difference between the two sites that could be causing the one to have this issue.
Any help would be greatly appreciated.
Cheers Cas

Hi Aish,
Thank you for your reply. I'm not using muse on the sites I mentioned though I have used it on another site and am not experiencing any issues with the In-Browser editing.
The issue is as mentioned in the thread you pointed me to, the browser address remains the same from page to page but if I update it manually I can then edit it.
I had read the thread but sadly there is no solution offered in it.
Thanks again
Cas

TestStand override report options for one sub-sequence

I have a TestStand sequence that calls 17 sub-sequences. I have the Report Options "Result Filtering Expression" set to "Exclude Passed/Done/Skipped". I am using TXT reports.
I want to override the Results Filtering report option for one of my sub-sequences (Voltage Test). I have included the ReportOptions Callback in the Voltage Test sub-sequence. The callback contains a statement that sets "Parameters.ReportOptions.ResultFilterExpression = "True"". The sub-sequence test results are still not appearing in the Report. I see no place in the TestStand documentation where the arguments for the "Parameters.ReportOptions.ResultFilterExpression" are listed. What am I doing wrong?

Hi
I have changed the attached sequencefile for the following in the ReportOptions
Parameters.ReportOptions.ResultFilterExpression = "Result.Status != \"Passed\" && Result.Status != \"Done\" && Result.Status != \"Skipped\""
One tip,
to get the correct syntax for the ReportOptions, place a break point in the ReportOptions. Before executing the Sequence File, setup the required parameter in the Configure | Report Options. Run the Single Pass, when it stops at the break point, you can then copy the contents of the required parameter.
Regards
Ray Farmer
Message Edited by Ray Farmer on 10-12-2006 09:24 PM
Regards
Ray Farmer
Attachments:
Affirm Clock Distribution Tests.seq ‏70 KB

Finder View Options, For All Sub Folders

If I understand how View Options work in Finder windows ...
I can set View Options for a particular folder to always open up in a particular View Options setting.
I can set that very same View Option as the Default View Option for all the rest of the folders I open up.
But, what I would like to do is set the View Options for a folder and all it's sub folders to be the same. Without changing the default View Option for the rest of the folder I open up.
For example.
I like to have my Documents open up in List View.
I like to have my Photos open up in Icon View. (along with certain Icon View Option settings)
Is there a way to do this?
Can I set the directory and all sub folders/directories for all my photos to open up the way I would like them? Without having to change the way all my Document folders/directories open up?
Because the way it seems to work now, is that every time I create a new folder in my Photos directory/folder, I have to manually set the View Options, since the default is List View and not Icon view. If I change the default to Icon View, then any new folder/directory in my Documents will then open up in Icon View.

If the folder is not set to open in a specific view, it should open in the same view as the containing folder. When using mixed views, you need to open the folder in another window to get the view it previously had.
In your example, setting Documents to always open in list view and Photos to always open in Icon view should have any new sub folders open in the same view. If any existing sub folders have a different view, you will need to manually change the view, since the Finder will (usually) keep track of the view any particular folder has.

Acrobat X Pro Ctrl E option for Edit Document Text tool

Hi,
When I use the "Edit Document Text" tool (formerly TouchUp Text) in Adobe X Pro and press Ctrl E, it's saying "Properties No current selection".
However, pressing Ctrl E on other tools such as Comments, Link etc, the Properties toolbar is showing properly. And when I switch back into using the "Edit Document Text" tool, the Properties toolbar will show as grayed out.
I tried using Adobe Acrobat 9 Pro and it's doing the same thing.
Is the Ctrl E Properties toolbar is not really available for "Edit Document Text" tool? Do I really have to right click on the area and choose Properties?

Hi gracet41265898,
Please refer the page associated with this Link (Unable to access Acrobat's Tool properties toolbar (greyed out, or "no current selection") ).
Please let me know if this resolves your issue or in case your problem persists.
Regards,
Rahul

Imac 27inch is a better option for editing?

Hi! i am having intel based Imac 17 inch computer .I want to go for 27inch . Is that good for editing?
The imac 27inch has only one firewire 800 and i want to connect to my external hardrive and to my external monitor. So i need two firewire ports atleast. what should i do? help me please.

Monitors do not connect to Macs through Firewire ports. You use the Mini DisplayPort for that, along with a suitable adaptor like the Mini DisplayPort to DVI Adapter or Mini DisplayPort to VGA Adapter.
You can also daisy chain several Firewire devices on a single Firewire port, for instance to use several Firewire HD's or a HD & some other Firewire-connected device.

Is HDMI OUT on motherboard a useful option for editing?

ASUS has motherboards with HDMI OUT. Is this useful for Premiere? Can this be used for having an external HD monitor for editing?

Not with PP. For an external monitor you may need a BlackMagic or AJA card.

Menubar load modules for each sub-menu

I am creating an application using the MENUBAR but cannot get a module to open when a sub-menu is clicked. I have stripped my app down to bare bones to eliminate other factors. The menubar has several main options, such as, Button1, Button2, Button3 and then each has a sub-menu dropdown. If Button1 has Button1Sub1 and Button1Sub2 dropdowns I want to have a different module launch when either of the sub-menus are clicked.
I have been successful in using ModuleManager to open a particular module referencing the creationComplete="moduleLoadHandler()" but not by selecting a menu item from the menubar. My application needs to be as user-friendly and Windows-like as possible. There are many different modules which need to be loaded and unloaded.
I have attached a screenshot image of my project tree and circled the ActionModule.swf file to show its location.
I have attached my code below:
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="vertical" creationComplete="creationHandler();" >
    <mx:Script>
        <![CDATA[
            import mx.controls.menuClasses.IMenuBarItemRenderer;
            import mx.controls.MenuBar;
            import mx.controls.menuClasses.MenuBarItem;
            import mx.controls.Alert;
import mx.modules.Module;
import mx.events.ModuleEvent;
import mx.modules.ModuleManager;
import mx.modules.IModuleInfo;
import mx.rpc.events.ResultEvent;
import mx.rpc.events.FaultEvent;
import mx.events.FlexEvent;
import mx.events.MenuEvent;
            import mx.collections.*;
            public var _moduleInfo:IModuleInfo;
            [Bindable]
            public var menuBarCollection:XMLListCollection;
            private var menubarXML:XMLList =
                <>
                    <menuitem label="Menu1" data="top">
                        <menuitem label="MenuItem 1-A" data="1A" itemClick="moduleLoadHandler()"/>
                        <menuitem label="MenuItem 1-B" data="1B"/>
                    </menuitem>
                    <menuitem label="Menu2" data="top">
                        <menuitem label="MenuItem 2-A" type="check" data="2A"/>
                        <menuitem type="separator"/>
                        <menuitem label="MenuItem 2-B" >
                            <menuitem label="SubMenuItem 3-A" type="radio"
                                groupName="one" data="3A"/>
                            <menuitem label="SubMenuItem 3-B" type="radio"
                                groupName="one" data="3B"/>
                        </menuitem>
                    </menuitem>
                    <menuitem label="Menu3" data="top">
                        <menuitem label="MenuItem 3-A" data="3A"/>
                        <menuitem label="MenuItem 3-B" data="3B"/>
                    </menuitem>
                    <menuitem label="Menu4" data="top">
                        <menuitem label="MenuItem 4-A" data="4A"/>
                        <menuitem label="MenuItem 4-B" data="4B"/>
                    </menuitem>
                </>;
            private function creationHandler():void{
menuBarCollection = new XMLListCollection(menubarXML);
private function moduleLoadHandler(event:ModuleEvent ):void{
canvas.addChild( _moduleInfo.factory.create() as Module );
_moduleInfo = ModuleManager.getModule('ActionModule.swf');
_moduleInfo.addEventListener(ModuleEvent.READY, moduleLoadHandler);
_moduleInfo.load();
            // Event handler for the MenuBar control's itemClick event.
            private function menuHandler(event:MenuEvent):void {
                // Don't open the Alert for a menu bar item that
                // opens a popup submenu.
                //if (event.item.@data != "top") {
                //    Alert.show("Label: " + event.item.@label + "\n" +
                //        "Data: " + event.item.@data, "Clicked menu item");
            private function onTopSelection(event:MenuEvent):void{
                var mb:MenuBar=event.target as MenuBar;
                var selectedIndex:int=mb.selectedIndex;
                for (var i:int=0;i<mb.menuBarItems.length;i++){
                    if(i==selectedIndex){
                        (mb.menuBarItems[i] as MenuBarItem).setStyle("fontWeight","bold");
                    else{
                        (mb.menuBarItems[i] as MenuBarItem).setStyle("fontWeight","normal");
         ]]>
    </mx:Script>
    <mx:Canvas id="canvas" height="75%" width="75%"
        paddingTop="10" paddingLeft="10">
        <mx:MenuBar labelField="@label" itemClick="menuHandler(event);" dataProvider="{menuBarCollection}" change="onTopSelection(event)" />
    </mx:Canvas>
</mx:Application>

Hi,
   I am also doing the same way, but ended up with some issues.
I have a Main Application with a menu Bar on Top and Rest of the area occupied by a ModuleLoader.
First I set the URL to login module, on successful login I initialize my menu Bar based on User role and load a new module, it contains only a SuperTabNavigator.
On click of an item in my Application Menu, I add a Custom Componenet built on Canvas (Named MyCanMod , this contains a Module loader and a progress bar in it , I have attached the code) as a tab to the tab navigator.
On menu item click, I take the data of my menu item and set that as the URL of my Module Loader inside the Custom canvas. Then it is added as a tab to my tab navigator.
      private function openItem(event:MenuEvent):void
var myModule:MyCanMod = new MyCanMod();                tabNav.addChild(myModule);
                tabNav.selectedChild = myModule;
                myModule.label = event.item.@label;
                myModule.icon = document_icon;
                myModule.urlParam = event.item.@module;
urlParam is a bined to the module Loader url in my Custom componenet.
All works fine. I am not unloading any modules and all the module loader are set to current domain.
When the user logs out and logs back with out refreshing the browser I get Type Error or some time null Object error and it is random. If I refresh the browser and login back, every thing is fine.
I do have reference for IDragManager,HistoryManager,PopUpManager,RemoteObject in main application.
I am not concerned about unloading modules now, but then on Tab close event I unloaded the module, and that did not solve the problem.
I get an error like
TypeError: Error #1034: Type Coercion failed: cannot convert flexlib.controls::PromptingTextInput@6152a851 to flexlib.controls.PromptingTextInput.
            at mx.core::UIComponent/createReferenceOnParentDocument()
            at mx.core::Container/createComponentFromDescriptor()
            at mx.core::Container/createComponentsFromDescriptors()
            at mx.core::Container/createChildren()
            at mx.core::UIComponent/initialize()
            at mx.core::Container/initialize()
            at mx.core::UIComponent/http://www.adobe.com/2006/flex/mx/internal::childAdded()
            at mx.core::Container/http://www.adobe.com/2006/flex/mx/internal::childAdded()
            at mx.core::Container/addChildAt()
            at mx.core::Container/addChild()
Any help is appreciated; I am really struck with it, please help.

Exporting/Loading properties for Multiple Numeric steps

So, my test uses quite a few 'Multiple Numeric' test steps.
I am just looking at using the property loader to import all of these limit values.
Now as i understand each test step in the property file (excel im y case) must have multiple columns (for each index in the data array)
I also understand that the easiest way to generate the excel properties file is to export it before adding the values.
Now, I am using the 'tools - import/export properties' window, and i try to add Step.Result.Measurement[x].Limits.Low but it is not available.
There is an entry for Step.Result.Measurement[?].HighExpr, so i can add that, then change it to [0], [1] etc
Is there not a way to add all of the array items at once?
I need '.comp' '.Limits.Low' '.Limits.High' for each array element.
Have i missed something obvious?
Labview 2010, TestStand 2010

Hi, I;m using 2010.
I'll give a more specific case:
In one of my multiple numeric tests i have the limit expression : Step.Result.Measurement["ck1+"].Limits.High
(I even tryed removing the alias and using : Step.Result.Measurement[0].Limits.High)
This can be found in the expression browser tree.
But this does not appear in the tree of expressions when using the properties import/export window.
The only items that do are: Result.Measurement[?].Limits.LowExpr & Result.Measurement[?].Limits.HighExpr
i have tried manual editing entries there, but they are ignored when exporting.
Help
Labview 2010, TestStand 2010

Comparing options for editing XDCAM in FCP?

Hello, I'm setting up an edit with 200+ hours of footage for a 90 minute project. It's shot mostly in XDCAM HD 60i. My goal is to get 2 or 3 editors through a multi-month edit while minimizing crashes as the assembly gets longer and the FCP projects get bigger... We expect to have a few other sources that come in as Apple Pro Res 422 or HDV. As far as delivery, we don't know of any reason why we'd have to deliver in XDCAM. We think it'll be graded in Pro Res 422.
Here's what I think I understand from poring over the forum... 3 project setups to choose from, The question is, if you can afford to do it, is C the preferred setup in terms of project stability for a long-haul edit?
(Setup A) The most basic route, editing natively in an XDCAM sequence, with render setting switched to Pro Res 422, has worked for some editors... but not if they start mixing codecs in their sequence...
(Setup B) Shane has suggested a few times to just edit in a Pro Res 422 Sequence. Shane, or others--could you clarify please, do you mean keep the XDCAM media but edit it in a sequence with Apple Pro Res 422 Preset? Also, what does it do better than the above? (Is it less crashy or does it let you mix formats?)
(Setup C) Several editors here have suggested transcoding all the XDCAM camera footage to Apple Pro Res 422 and editing in that... If you can afford the storage space and the transcode time. Is that the clear winner?
If so, what's the best way to transcode in terms of video quality & workflow -- Media Manager, Compressor or any other software? Within compressor, is it better to choose "Apple Pro Res 422 for interlaced media" or just plain "Apple Pro Res 422"? (Again, shot in 60i) Would anyone recommend modifiying a Compressor setting for better results?
Also, this last one is just for curiousity... why is a clip in .MXF so close in size to the .mov that is produced when you import to FCP with XDCAM browser? My colleagues and I were thinking of .mxf files as "compressed" versions of the clips you'll edit with, but do they have the same amount of compression, just one is in an .mov wrapper?
Many Thanks to all!
Jen

>(Setup B) Shane has suggested a few times to just edit in a Pro Res 422 Sequence. Shane, or others--could you clarify please, do you mean keep the XDCAM media but edit it in a sequence with Apple Pro Res 422 Preset? Also, what does it do better than the above? (Is it less crashy or does it let you mix formats?)
Yes, that is what I mean. Make a 1920x1080 ProRes 422 sequence, and edit the XDCAM in that sequence. If you have other formats, convert them to ProRes 422 if you can, or if they are other native formats like DVCPRO HD or HDV, they will mix fine. AVCHD, H.264...those get converted to ProRes.
This is better than Option A when mixing footage types. So if you have ProRes, XDCAM, HDV, DVCPRO HD, DV...this is the way to do it.
Setup C...if you have the time and space....is a fine option too. But Setup B has always worked fine for me and I see no benefit to transcoding, other than not having a render bar.
>Also, this last one is just for curiousity... why is a clip in .MXF so close in size to the .mov that is produced when you import to FCP with XDCAM browser?
MXF and Quicktime are just "wrappers" that house the footage CODEC. Like AVI is the Windows wrapper of choice. MXF can be DVCPRO HD, XDCAM...a host of other formats. What FCP does is take the MXF media, the codec, and just wraps it into Quicktime so FCP can read it better. Just changing how it is housed, not the codec. So the sizes are exactly the same.

'Master Options' for editing a master spread does not allow me to edit it.

I am trying to create various masters to a documents based on the original A Master.
instructions on InDeign Help, I selected the master I wish to edit,.
selected "Master Options' but it does not allow me to edit the new B master.
WTF?

The reason for basing one master on another is that they need to have the same content on both masters, with other non-shared content on one or more. It makes sense most times to start with a Master page that contains only the shared content.

GPU options for editing RED 4k via Mercury Engine

Hi Everyone,
I've done a fair bit of research in terms of GPU options, but have yet to have found any decent information regarding specifically the RED 4k workflow.
I'm currently in the process of building this workstation:
i7 2600 Overclocked @ around 3.8Ghz with Corsair H80
Gigabyte Z68X-UD3H Mobo
16GB 1600MHZ Corsair Blue
2x HDs in RAID 0
1x SSD for operating system
2x 24in Dell Ultrasharp @ 1920x1200
My three options currently are:
GTX 570 1.2Ghz @ £220 - 480 CUDA Cores - 320bit
GTX 580 1.5Ghz @ £350 - 512 CUDA Cores - 384bit
GTX 580 3.0Ghz @ £430 - 512 CUDA Cores - 384bit
The sole purpose of this workstation is to be able to edit 4K R3D files at 1/2 res. Does anyone have a similar setup, if so how does it perform with R3D files?
My financial situation isn't great after just shelling out £15,000 on a Scarlet, but seeing as this setup is built solely for the purpose of editing RED content it seems silly to shoot myself in the foot trying to save a buck on the GPU . The 570 is a third cheaper than the 580, but would I notice any real world difference in the editing capabilities of my workstation?
Does Premiere CS5.5 fully utilise the extra 32 cores between the 570 and 580? Are there any advantages of having the extra GPU processor speed between the 1.5Ghz and 3.0Ghz when it comes to Premiere, such as being able to have more 4K streams in the timeline for instance? Are there any obvious bottlenecks in the proposed system?
I understand that Quadros would be the best way forward for workstation acceleration, however unfortunately these cards are out of my budget.
Thanks for your time.
Ross

Ross,
In a thread from 2011 (http://forums.adobe.com/thread/883259) I posted the following test results:
...my test results with the RED 4.5k footage on a high-end PC that does not have any special hardware installed (RED Rocket, etc.), I've summarized my findings below:
PC: Intel i7-970 at 4.2GHz, 7x1TB RAID 5 array, and a GTX 480 with 1.5GB GDDR5 VRAM:
TEST 1a: Hardware MPE and un-rendered timeline:
- Scrubbing and playback at 1/2 resolution - perfect quality, no lag whatsoever, CPU usage around 70% (wow, that's with 6 real cores and 6 hyperthread pseudo cores!)
- Scrubbing and playback at full resolution - HORRIBLE, unusable
TEST 1b: Hardware MPE and fully rendered timeline:
- Scrubbing and playback at full resolution - perfect quality, no lag whatsoever, CPU usage around 20% for playback
- Full timeline render is pretty slow - about 9 minutes for 1 minute and 20 seconds of clips on the timeline
TEST 2a: Hardware MPE and un-rendered timeline; this time with 4 layers displayed simultaneously (each at 50% size and in a separate corner):
- Scrubbing and playback at 1/4 resolution - perfect quality, no lag whatsoever, CPU usage around 100% (again, wow!); also, I have to add that RED at only 1/4 resolution is still pretty stunning!
- Scrubbing and playback at full resolution - HORRIBLE, unusable
TEST 2b: Hardware MPE and fully rendered timeline; same 4 layers as test 2A:
- Scrubbing and playback at full resolution - perfect quality, no lag whatsoever, CPU usage around 20% for playback
- Full timeline render is again pretty slow - about 7 minutes for 4 clips around 20 seconds each
I'm very unqualified to tell someone how to build a system for RED, but my sense from running those quick tests was that RED taxes your CPU massively, but the GPU not so much.
If you have not purchased your CPU yet, go for the 2600k model and shoot for a higher OC, say around 4.4GHz. I think that you will want and / or need lots of CPU "grunt".
Regards,
Jim

Download Load Option for Adobe Photoshop Elements 11.0 Akamai or Alternate with MS 7

Which download option do I use if I have 64 bit Micro Soft 7.0 for Adobe Photoshop Elements 11.0: Akamai or Alternate?

Found this in Download support.
This helps even more to explain the difference between the two and the WHY you would pick one over the other:
Start the download by choosing one of the following:
Click Download and follow the onscreen instructions.
Click Akamai Download Manager and follow the onscreen instructions.
If you prefer downloading directly in a browser, click Alternate Download Method. Then click the .7z and .exe files (Windows) or the .dmg file (Mac OS) to download the software to your computer.

No Load Option for ASE Files in PS 7.0?

I am still using photoshop 7.0, and was looking to load some
swatches from kuler, but I cannot! The only swatch files supported
by this version of photoshop are ACO and ACT... am I missing
something here.. or is this true?
If it is, how can I make it load the ASE swatches as well?
Thanks,
-terra

kuler currently works with Adobe Photoshop CS2 using ASE
files. There is no support for ACO and ACT.

Load Options for Edit Sub Step

Similar Messages

Maybe you are looking for