Load plan not starting from point of failure in obia 11
hi,
I am using obia 11..1.1.7 & once load plan is started. few session are failed due to duplicates. After removal of duplicates, once i start load plan from configuration manager. It is starting again from start not from point of failure. I tried restarting load plan from ODI studio also from load plan & scanarios too but it again started from start not from point of failure.
Can someone explain how to use ODI start from point of failure feature in OBIA.
Thanks,
Paresh
JamesW wrote:
That's exactly that. Shutdown the database. make the correction in the PFILE, started the DB using the PFILE and then created a new SPFILE .. Restarted the DB (using the SPFILE), restated the upgraded assist.. its not at 9% and running
Pesky Oracle Thanks guys for your help
FWIW, and for your future understanding, you didn't actually have to *start* the database with the pfile in order to create the spfile.
In this example, I don't even have a database named fubar ...
oracle:fubar$ pwd
/u01/app/oracle/product/11.2.0/db_1/dbs
2013-08-15 10:52:29
oracle:fubar$ ls -l init*
-rw-r--r-- 1 oracle oinstall 2851 May 15 2009 init.ora
-rw-r----- 1 oracle oinstall 35 Jan 31 2013 initorcl.ora
2013-08-15 10:52:36
oracle:fubar$ ls -l spfile*
-rw-r----- 1 oracle asmadmin 2560 Aug 15 10:47 spfilekilroy.ora
2013-08-15 10:52:39
oracle:fubar$ export ORACLE_SID=fubar
2013-08-15 10:52:48
oracle:fubar$ sqlplus / as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on Thu Aug 15 10:52:53 2013
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to an idle instance.
SQL> create spfile from pfile='init.ora';
File created.
SQL> exit
Disconnected
2013-08-15 10:53:05
oracle:fubar$ ls -l spfile*
-rw-r----- 1 oracle asmadmin 1536 Aug 15 10:53 spfilefubar.ora
-rw-r----- 1 oracle asmadmin 2560 Aug 15 10:47 spfilekilroy.ora
2013-08-15 10:53:07
oracle:fubar$
Similar Messages
-
Hi All,
We seem to be being plagued by the error below by our SQL Server agent. This happens almost everytime we restart the server that has been running for a day or two.
Our SQL Server Agent uses a none expiring domain credential. I understand that this problem only happens when the profile being used by the SQL Servr Agent has changed (password change). What puzzles me is that the login is A ok and no changes has been made to it's password.
We always resolve this problem by changing the login used in the SQL Server Agent to local and after that, returning it back to it's original domain login. Unfortunately, we cant always do this everytime something goes wrong.
Can anyone please help us shed a light on this? We're using SQL2k with SP3a. Thanks!
Error:
An error 1069 - )The service did not start due to logon failure) occurred while performing this service operation on the SQLServerAgent service.
Regards,
JosephRan into this error, and the password was correct. What the System Event Log said:
Code SnippetEvent Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7041
Date: 10/8/2008
Time: 9:33:09 AM
User: N/A
Computer: ComputerName
Description:
The SQLSERVERAGENT service was unable to log on as DomainName\SQLAgent with the currently configured password due to the following error:
Logon failure: the user has not been granted the requested logon type at this computer.
Service: SQLSERVERAGENT
Domain and account: DomainName\SQLAgent
This service account does not have the necessary user right "Log on as a service."
User Action
Assign "Log on as a service" to the service account on this computer. You can use Local Security Settings (Secpol.msc) to do this. If this computer is a node in a cluster, check that this user right is assigned to the Cluster service account on all nodes in the cluster.
If you have already assigned this user right to the service account, and the user right appears to be removed, a Group Policy object associated with this node might be removing the right. Check with your domain administrator to find out if this is happening.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp
...sure enough it had been removed from the "Logon as a service" list. Hope this helps. -
Mac OS 10.5 /
I deleted the " Private" folder ... and emptied the trash. So the folder and its contents no longer exists on my computer at all !!!
I do have the OS 10.5 dvd that i purchased years ago...
But my computer will not start from it on its own.
My question is what is the open source or terminal language code used to tell my mac to look in the DVD rom drive for startup info? I know that im not the only person in this world who has deleted the "PRIVATE" folder and emptied the trash so it no longer exists on their machine...
That said theres gotta be a common fix for a Power PC G4 that has the OS X dvd in the rom drive but wont look to it to reinstall the vital contents of the PRIVATE folder.
Once again there is not a copy of this file or its contents in the recycle bin...
Also rebooting the machine , pressing and holding the letter C does not prompt the machine to look to the dvd rom drive.
I was reinstalling pro tools and figured I would make some room by cleaning my computers HD...
Lol It was a bad choice to delete this file ...
Thanks guysOkay sorry it took forever to respond... But for a while there I gave up on this computer!!!!
Money's been tight lately , so taking it in to a professional was not yet an option... though I did consider it eventhough.
Anyway long story short im glad I didnt spend any money because I already had all the tools necessary to fix this issue but was going about it in the wrong way. Okay so here is my scenario and the breakdown... Though this may not fix the issue for everyone :( which *****... But I know we all will have different circumstances.
Anyway here we go...
Okay so first things first.... Years ago I purchased the OS 10.5.1 disk ... So that has always been in my possession!!!!
I realize that some may not have a disk to reflash your OS to your hard drive... but if you do your in luck.
2ndly ... I had an external harddrive with all of my itunes downloaded music so it was more than okay with me to delete my primary HD because all the important stuff could either be copied over or repathed to be located.
-------If you dont want to read through the whole story the fix is summed up in the bottom section-------
Okay so now the SOLUTION!!!!
By trial and error , and pure boredom I opened up my computer to clean the inside...
AND
"Disconnected the primary HD"
and just because ....... REBOOTED my computer. Just to see what it would do.
Upon restart and though it looked like it would repeat its usual cycle...
About 1 minute in to that process my computer froze for about 2 seconds and flashed to the OS installation screen.
Mind you I havent seen this screen yet... Probably hasnt been since I installed the OS years ago.
After a bit of trial and error...
I decided to tell my computer to startup from the OS 10.5 disk located in my dvd rom drive and restarted once again...
this setting is under
Utilities / startup disk
After a little more trial and error ... I realized that I could reconnect the primary HD , restart the machine and return to the OS installation menu.
So upon this discovery
I went to the Disk Utility located under Utilities
Highlighted my primary HD located in the left hand column
Once highlighted ...
In the heading section on the right I selected the option
Erase
in which I erased My current OS on my primary HD ...
I used the first option in the list under security... Because it seemed like the least invasive and would take the least amount of time to see if this process would actually work.
I FORGOT to add something...
Another reason why I deleted my primary HD!!!!!
I forgot to say that it WOULD NOT!!!!! Show up in the STARTUP list as an option...Even After multiple reboots....
But like clockwork... Once I deleted its name IT SHOWED UP as an option!!!!
So back to the next step...
I returned to the STARTUP option under utilities ... And was then able to see MY primary HD now as a startup option...
But ofcourse it had no name because it we previously erased it.
So when Clicking my newly erased HD ... I was almost immediately prompted to REINSTALL the OS ...
Which said it would take about 57 minutes ... But I believe was alot less...
My issue was resolved ... My computer then stated the install was SUCCESSFUL!!!!!!! :))))))))))) lol ;)
It was like I was setting up for the first time ;) asking for my registration info...
The dilemma of deleting the private folder and emptying the trash is finally over resolved. Done ... and no extra money spent!!!!!!!!!
Its really crazy that the information for such a simple thing is not readily available. Especially being such a simple fix.
I know im not the only person who's had this issue , because i've seen numerous posts with similar wording.
I also know I wont be the last person to have this issue... So I hope this synopsis makes sense.
-------One more time the fix------
*Insert your OS dvd into your dvd rom drive.
*Unplug your primary HD or corrupted startup disk
*Reboot your machine...
Upon restart your primary HD will not be recognized...
* you will then be prompted to select your language.
Once selected
*Click Utilities/startup... Highlight the the selection that refers to the OS dvd located in the dvd rom drive.
* Click restart...
!!!!!!!!!!Be sure to reconnect your Primary HD Before your computer restarts and you hear the chime!!!!!!!!
If you do not replug your HD before the chime it will not be recognized.
In that case restart again.
Upon restart once again
*Choose your language...
*Click Utilities / disk utility
In the left column select and
*Highlight your HD ...
Then towards the top portion / center of the page
*Click the heading Erase
Then on the page toward the bottom
*Click security options
This will then provide erase options.
I USED THE FIRST OPTION
"Dont erase data"...
*click OK
* click erase...
Once erased which should take a few seconds
*Cancel the disk utility...
* Click Utilities / startup
And your newly erased HD should now appear in the list.
* Select your drive from the list by highlighting
It should no longer have a name.
*Once selected, you will then be prompted to restart and install the OS to your newly erased HD...
Thats it!!!!
Once everything reinstalls re-add your personal info or registration info and you are up and running.
Goodluck ;) -
Middleware - Delta load is not working from CRM to R/3
Hi Experts,
Our client is using SAP-R/3 4.7 and CRM 5.0
Connectivity was established via Middleware and initial load of Customizing objects and Master data( Customer and Material) was finished successfully.
Now if i create any Customer or Product in R/3 they were replicating to CRM(Delta load), but this delta load is not working in CRM to R/3 direction.
In CRM Administration console( Transaction code - SMOEAC) R/3 site was maintained and subscribed for Publications - All Business Partners, All Business Transactions and All Business partner Relationships.
Can anybody help me out that why Delta load is not happening from CRM to R/3 Direction.
Thanks in advance
Nadh.Hi Nadh,
for BPs check PIDE settings once agiain, i hope u ve already downloaded all mandatory obects for BP, because u already told that replication from r/3 to crm is ok, so check once again PIDE settings (CRM to R/3),
for Products u ve to manual upload only
for Products
This may be necessary because the data is required in the OLTP System for a number of logistical processes such as procurement, inventory management, billing, financial accounting, controlling.
cheers
Ranga -
When I started my new iPad 2 I could not start from a previous backup because the os on the new iPad is not the latest 7.x used to backup the previous ipad2 to install the new os I had to start the iPad as new. But now I cannot backup from the previously backup ipad
Hi there,
You may find the troubleshooting steps in the articles below helpful.
iCloud: Troubleshooting restoring an iCloud backup
http://support.apple.com/kb/ts4036
iOS: If you can't back up or restore from a backup in iTunes
http://support.apple.com/kb/ts2529
-Griff W. -
How do I get a numbers spread sheet to open where I left it and not start from the beginning every time I open it?
There is no built-in setting for redirecting a bookmark to a new tab.
Is it possible that the computer which does that has an add-on such as the Tab Mix Plus extension installed? TMP has a setting for that (Events > Tab Opening).
https://addons.mozilla.org/firefox/addon/tab-mix-plus/ -
Elements 5 will not start from the windows old file after upgrading from vista to win 7
Elements 5 will not start from windows.old after upgrading from vista to win 7
Ideally there should not be any impact of OS change, but officially PSE5 is not supported on Win7.
What exactly happens ? Can you see the processes running in Task-manager? -
Mbp 15" does not start from set up disk
I formatted my MBP because it did not recognize the monitor, had to attach an extermal one to view image. Now, I cannot install the original OS because it does not start from set up disk. I was using OSX Lion latest version
Formatting the entire drive was rather excessive to solve a external monitor issue.
Likely a PRAM or SMC reset would have cleared it.
Step by Step to fix your Mac
10.7 Lion can only be reinstalled via the Recovery HD partition or via a external Recovery USB made in advance.
Hopefully the Recovery HD partition is still availalbe, hold the command and r keys down while booting (with a actve Internet connection cable attached to the router or modem) and see what happens. If you get something then format the Macinstosh HD partition in Disk Utility (GUID, OS X extended journaled) and quit, reinstall 10.7 from Apple's servers with your AppleID and password.
https://support.apple.com/kb/HT4718
http://osxdaily.com/2011/08/08/lion-recovery-disk-assistant-tool-makes-external- lion-boot-recovery-drives/
If not, then hold c or option key and boot from the 10.6 installer disk, use Disk Utility to erase the entire drive on the left and format same (GUID, OS X extended journaled) then quit and install 10.6, then log into AppStore and update to 10.7 again, the Recovery HD partition will be reinstalled automatically.
How to erase and install Snow Leopard 10.6
How to reinstall just OS X or erase/install OS X
If your attemtping to revert your 10.7 Mac to 10.6 then read this, it's a better explaination
How to revert your Mac to Snow Leopard
If your 10.6 disk doesn't work, then call Apple for a replacement disk. -
Computer crashed; new C drive installed. How do I restore/recover my bookmarks on Sync? Would rather not start from square one.
Without the Sync Key, even if you could connect and download your data from the Sync server it would be useless without your Sync Key. The Sync Key is used to encrypt & decrypt the data going to & coming from the Sync server.
-
Ibook not starting & "underlying task reported failure on exit"
My ibook is not starting up. It was having problems loading up and getting in interminable spinning ball fits as I tried to use the computer for basic things like surfing internet, word processing, itunes. I ran disk repair several times, and the problems would resume. Finally I left it on, afraid to turn it off, but my boyfriend unplugged it, and it eventually ran out of juice. Now I hear it power up, but it doesn't start up all the way (it's gotten to different points in start-up process after I took each step below, but never all the way).
What I've tried so far:
1. I've run disk repair from the start-up disk, and got the "The underlying task reported failure on exit" message.
2. I did the archive reinstall, did not work either. Tried disk repair again and still getting same message as #1.
3. Also tried starting up in single-user mode and running fsck, but getting message "root device is mounted read-only." Not sure what this means. Ran disk repair again after this, gets me same message as #1.
I'm hesitant to do a complete reinstall, as I have documents and music files that haven't been backed up. I have an external hard drive to move files if I could just start up my computer.
My questions:
1) Any thing else I can try short of complete reinstall to fix the problem?
2) Any way I can save my files if I can't get the computer fully loaded?
3) Would a 3rd-party disk repair program allow me to fix the problem without wiping out my files?
4) Why is fsck not running?
Any advice would be appreciated!
iBook G4 14 1.33GHz 768 RAM Mac OS X (10.3.9) Think it's 10.3.9, but can't verify. Bought ibook in '05.Last question first, the command to shut down from Single-User Mode is:
shutdown now -h
Check out this Apple Knowledge Base article which addresses the exact problem you're seeing:
http://docs.info.apple.com/article.html?artnum=302411
DiskWarrior is likely your best bet for recovering your hard drive. Someone said it is available at Apple Stores, or you can use the online link I've provided here.
If you have another Mac, you may be able to access your hard drive via FireWire Target Disk Mode in order to retrieve your important files to the hard drive of the other Mac.
Good luck. -
We have tried to change authenticaion of BI Apps 11.1.1.7.1 to LDAP, but reverted this due to some other issues. Now we are back with standard authentication, and all functionality seems to work fine, except execution of a load plan.
When we select (any) plan that was executed earlier, we get an error:
[BIACM0085] Error executing load plan. Action: Correct the properties selected or entered and retry.
[BIACM0080] Cause: Application error: MustUnderstand headers:[{http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd}Security] are not understood Action: Contact your help desk or system administrator.
According to one of our WLS gurus there is a mismatch between consumer and provider of a web service with a security policy, but we cannot find any difference between a working and this failing environment.
We already started a trace in WLS, but this does not help us further.
Any hints on troubleshooting steps or even better resolution are more than welcome, as this is blocking a new full load and further tests.
Tx,
LucWe have tried to change authenticaion of BI Apps 11.1.1.7.1 to LDAP, but reverted this due to some other issues. Now we are back with standard authentication, and all functionality seems to work fine, except execution of a load plan.
When we select (any) plan that was executed earlier, we get an error:
[BIACM0085] Error executing load plan. Action: Correct the properties selected or entered and retry.
[BIACM0080] Cause: Application error: MustUnderstand headers:[{http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd}Security] are not understood Action: Contact your help desk or system administrator.
According to one of our WLS gurus there is a mismatch between consumer and provider of a web service with a security policy, but we cannot find any difference between a working and this failing environment.
We already started a trace in WLS, but this does not help us further.
Any hints on troubleshooting steps or even better resolution are more than welcome, as this is blocking a new full load and further tests.
Tx,
Luc -
Row_number function not starting from 1
I have two row_number functions in my select statement both has same columns and condition for partition and order by,
except one column in order by which is being ordered by DESC.below is function :
row_number() over (partition by event_cd order by status ASC ,event_date DESC) row1
row_number() over (partition by event_cd order by status DESC ,event_date DESC) row2
Status field has value 0 for incompleted and 1 for completed,if its 0 there will be no date.
The original set of data is :
event_cd status event_date
tsk 0
tsk 0
tsk 1 25-aug-2006
tsk 1 28-aug-2006
tsk 1 31-aug-2006
tsk 1 01-sep-2006
Result I am getting for row1 is
status row1
0 1
0 2
1 3
1 4
1 5
1 6
Result for row2 is
status row1
1 5
1 6
1 1
1 2
0 3
0 4
My confusion is why row2 has not its row number starting from 1,it looks like its
depending on row1 results?If yes,then why?Looks fine to me:
SQL> create table mytable
2 as
3 select 'tsk' event_cd, 0 status, null event_date from dual union all
4 select 'tsk', 0, null from dual union all
5 select 'tsk', 1, date '2006-08-25' from dual union all
6 select 'tsk', 1, date '2006-08-28' from dual union all
7 select 'tsk', 1, date '2006-08-31' from dual union all
8 select 'tsk', 1, date '2006-09-01' from dual
9 /
Tabel is aangemaakt.
SQL> select t.*
2 , row_number() over (partition by event_cd order by status ASC ,event_date DESC) row1
3 , row_number() over (partition by event_cd order by status DESC ,event_date DESC) row2
4 from mytable t
5 /
EVE STATUS EVENT_DATE ROW1 ROW2
tsk 0 1 5
tsk 0 2 6
tsk 1 01-09-2006 00:00:00 3 1
tsk 1 31-08-2006 00:00:00 4 2
tsk 1 28-08-2006 00:00:00 5 3
tsk 1 25-08-2006 00:00:00 6 4
6 rijen zijn geselecteerd.Regards,
Rob. -
Mp4 Videos in ios 5 do not start from last stop
Hi,
Since I updated my iphone 4 to ios 5 (and 5.0.1) my movies / mp4 videos in the video app will always start from the beginning even though I set "Start from last stopp" (sorry, something like that in german) in the settings.
I have some videos on the iphone which were there before the update, and those videos do start at the position of the last stop - new ones won't.
Any Idea?
Kind RegardsOkay, it looks like iTunes 10.5.1 has solved this issue. I synced one video that did not work before, even after multiple syncs. After a sync with 10.5.1 it worked.
-
Pavillion G72 Synaptics TouchPad will not start from a restart or a cold bbot.
After the broken LCD screen was replaced the Synaptics TouchPad will not start up. I deinstalled and reinstalled driver 15.3.29.0 downloaded from the HP driver web site. The icon will not display. In the ICon Notification Area settings, when I choose "show icon and notifications" the response is a message that the icon is inactive.
If I click on the the shortcut in the startup folder for SynTPEnh.exe the icon displays, disables the TouchPad becasue it detects the wireless mouse (as selected in the checkbox). After a system restart or cold boot it does not run.
In System Configuration, whereas all programs start as C:\Program Files\... , the one for SynTPEnh.exe dislays as C:\PROGRA~1\SYNAPT... Is this the problem/
I found the same at HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run but editing that to match the other programs made no difference.
What do I need to do to make SynTPEnh.exe start up?
Thank youRunning OS Name Microsoft Windows 7 Home Premium
Version 6.1.7601 Service Pack 1 Build 7601
Note also that the Synaptics TouchPad is not listed on the Control Panel under Adjust Your Computer's Settings as. Should show up as Synaptics TouchPad V7.5 -
IMac not starting from internal drive
Strange one this, iMac won't start from its own hard drive. It starts happily from an external drive, and other Macs are happy to start using this Mac (in target disc mode) as startup disc. So there doesn't seem to be anything wrong with the hard drive or the computer! In Verbose safe boot, it stops quickly after about 10 lines of text, the last line being "Loading System\Library\Caches\com.apple.kext.caches\Startup\Extensions.mkext........... ....", and just hangs there.
Any help / suggestions appreciated!Must be a bad SATA cable undetected by Apple Techs. A result of the drop but they are also quite fragile.
Disturbing the cable can cause it to work for a while. Cheap repair at iFixIt.
Maybe you are looking for
-
Follow-up for Michael Conniff (or anyone interested in corrupt NetInfo DBs)
Michael was EXTREMELY helpful to me with a corrupt NetInfo database problem I had a few months back (that archived thread is here: http://discussions.apple.com/thread.jspa?threadID=823282&tstart=0 I was talking to someone else about this recently, an
-
How do I send an email to all members in a smart group?
I have a smart group set up in messages that I imported from outlook. When I click the + option in the email addy bar, my smart group pops up as an option. Is there a way to select all in the group?
-
Lync 2010 client promt for credentails to EWS server, ONE time on every login
Hello I have a problem with Lync promting user to login to the EWS service. There is a lot of articles regarding this issue on the forums out there. But all the articles address issues with the autodiscover endless passwords promt and EWS not beeing
-
Dear all There is scenario for Asset-Building in legacy data......for building there are many line items...for e.g. 1. Building is purchased 2. then some addition in this asset(with other date) etc. Now how to upload this assets in the system..... r
-
TableAdapter with Parameter generates a ORA-00936 - Visual Studio 2005
Hello everyone, I have the following SQL code in a Query of a TableAdapter in VS 2005. I want to pass the paramter to it for Name. This works in MS SQL Server. What do I have to change to make it work in Oracle. I am getting the Error ORA-00936 when