Load Plan Restartability features not visiable from ODI console (EWR)

Hi,
We are trying to use ODI console in TEST environment(Execution work Repository) to perform restartability of Load Plan. But when we right click on the failed LP, Restart link is not visible. I can do the same functionality using ODI console in DEV (Development work repository). Does this restartability feature is not available using ODI console of EWR?
Thanks
Sanjeet

Hi Sanjeet,
Based on the documentation here (http://www.orastudy.com/oradoc/selfstu/fusion/integrate.1111/e12643/odi_console.htm#CIAEGCDE), it looks like the Load Plan must be in error state and another instance of the Load Plan cannot be running in order to restart.
Regards,
Michael Rainey

Similar Messages

  • Macbook Pro will not load OS and will not boot from Install Disk

    When I try to turn on my macbook pro it goes to the gray logo screen with the spinning gear however it does not progress from there and then after several minutes it proceeds to restart itself and the same process repeats itself. I have tried to boot into single user mode with success and have run /sbin/fsck -fy and that has returned that the volume appears to be ok. However, when I hit reboot it returns to the same process of the gray screen and spinning gear to black screen which repeats. When I boot into verbose mode it progresses to AppleYukon2: RxRingSize <= 1024, TxRingSize 256, RXMAXLE 1024, TXMAXLE 768, STMAXLE 3328 then it stalls for several minutes and then it shows continuing
    synchronizing disks... Killing processes
    then it says some other stuff to fast to read.
    When I try to boot from the install disk it will not boot from holding the c key it goes through the same aforementioned cycle. When using option to boot I can see the Disk then when I select it the cycle happens again.
    Also I have XP installed and I am able to boot into that successfully. Any help would be greatly appreciated.
    Not sure if I left anything out
    -bryce

    Welcome to Apple Discussions.
    Do you have multiple Accounts defined on that system? The last time you successfully were running, did you run from the Account with Administrator privileges?
    Do you have another computer from which you could boot and connect the Macbook Pro in Target Disk Mode to take a look at the drive from your working machine? Perhaps you can run Disk Utility from the working machine and point to the hard disk on the failing Macbook Pro.
    Message was edited by: Rick Lang

  • Problem with Out of Band Discovery resulting with Out of Band features not available in SCCM console for computers with provisioned AMT device

    Hi,
    We configured the Out of Band component, but are using Intel SCS RCS to provision AMT devices remotely­. The remote configuration process with Intel SCS works fine; we are able to connect to the AMT web UI and we can use a free KVM tool to manage the computer
    remotely.
    The AMT devices are configured with AD integration, so an object is created for each of them in a specific OU. Also, an AD group is added to the AMT devices so remote PT Administration permission is granted to it. This group includes the ConfigMgr Site
    Server account, the account of the server running the Out of Band Service Point and my own user account.
    This configuration seems OK since when connecting to the AMT web UI, I use Windows Integrated authentication with my user account and can manage the device successfully.
    So the only step remaining is running the OOB discovery to enable Out of Band features for the computers in the SCCM console. We want to use the ConfigMgr OOB console. I right-click a computer or a collection and launch the AMT discovery. I check the OOB
    server log, I don't see errors; the OOB service point connects to the AMT device and discover a status of 4, which is Externally provisioned, as expected. The problem is the AMT Status, AMT Version and Provisioned AMT fields for the computer in the ConfigMgr
    console doesn't get updated, even after doing display refresh.
    Here's the amtopmgr.log (I changed computer name and IP address information to protect client privacy) :
    General Worker Thread Pool: Work thread 364 started SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:25 364 (0x016C)
    Discover COMPUTERA using IP address 192.168.12.7 SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:25 364 (0x016C)
    AMT Discovery Worker: There are 1 tasks in pending list SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:25 2792 (0x0AE8)
    AMT Discovery Worker: Wait 20 seconds... SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:25 2792 (0x0AE8)
    AMT Discovery Worker: Wakes up to process instruction files SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:25 2792 (0x0AE8)
    AMT Discovery Worker: There are 1 tasks in pending list SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:25 2792 (0x0AE8)
    AMT Discovery Worker: Wait 20 seconds... SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:25 2792 (0x0AE8)
    DoPingDiscoveryForAMTDevice succeeded. SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:25 364 (0x016C)
    Flag iWSManFlagSkipRevocationCheck is not set. SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:25 364 (0x016C)
    session params : https://COMPUTERA.contoso.com:16993   ,  11001 SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:25 364 (0x016C)
    DoWSManDiscovery succeeded with user name: admin. AMTStatus = 1. SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:32 364 (0x016C)
    Start Kerberos Discovery SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:32 364 (0x016C)
    Flag iWSManFlagSkipRevocationCheck is not set. SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:32 364 (0x016C)
    session params : https://COMPUTERA.contoso.com:16993   ,  484001 SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:32 364 (0x016C)
    DoKerberosWSManDiscovery succeeded. AMTStatus = 4. SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:32 364 (0x016C)
    Discovery to IP address 192.168.12.7 16 15:16:32 364 (0x016C)
    CSMSAMTDiscoveryTask::Execute, discovery to STI17259CPCO succeed. AMT status is 4. SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:32 364 (0x016C)
    CSMSAMTDiscoveryTask::Execute - DDR written to E:\SMS\MP\OUTBOXES\ddr.box SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:32 364 (0x016C)
    CStateMsgReporter::DeliverMessages - Queued message: TT=1201 TIDT=0 TID='Fill Machine Property' SID=1 MUF=0 PCNT=5, P1='COMPUTERA' P2='' P3='COMPUTERA.contoso.com' P4='' P5='' SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:32 364 (0x016C)
    CStateMsgReporter::DeliverMessages - Created state message file: E:\SMS\MP\OUTBOXES\StateMsg.box\6heghx71.SMX SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:32 364 (0x016C)
    CStateMsgReporter::DeliverMessages - Queued message: TT=1201 TIDT=0 TID='Unspecified' SID=10 MUF=0 PCNT=1, P1='COMPUTERA.contoso.com' 16 15:16:32 364 (0x016C)
    CStateMsgReporter::DeliverMessages - Created state message file: E:\SMS\MP\OUTBOXES\StateMsg.box\rmit91js.SMX SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:32 364 (0x016C)
    General Worker Thread Pool: Succeed to run the task COMPUTERA.contoso.com 16 15:16:32 364 (0x016C)
    General Worker Thread Pool: Work thread 364 has been requested to shut down. SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:32 364 (0x016C)
    General Worker Thread Pool: Work thread 364 exiting. SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:32 364 (0x016C)
    The Management Point is up and running.
    Any suggestion or advice is welcomed!
    Thank you
    Patrick

    I found something interesting on this problem, it seems the OOB discovery process is working fine, but for an unknown reason, the site server is not receiving the information from the OOB Service Point to update the AMT Status of the client in the SCCM
    database.
    The log tells me that a DDR file is created to be sent to the site server. When looking into the SMS\MP\Outboxes\ddr.box folder, I see about 50 DDR files, the oldest one is dated when I started testing OOB discovery.
    So the server is unable to send the files to the site server.
    Also, since I started this thread, I noticed another issue that could be related to this problem. The same server is also holding the State Migration Point role, it is working fine, but when doing USMT operations, the status of the computer association is
    not updated in the console (In Progress, Completed, missing USMT store path, etc.). When looking into the SMS folder on the server, I see a big backlog of SVF files containing information related to the SMP.
    I looked into the log files, but didn't find the errors yet to explain this.
    The computer account of the server is a member of the SMS_SiteSystemToSiteServerConnection_Stat_XXX group on the site server.
    Note that status messages are being sent successfully, I see them in the Monitoring node of the console under Component State, and there is no backlog in the SMS\MP\Outboxes\statemsg.box folder.
    Tnx for your help
    Patrick

  • 11g node manager reachable but server does not start from admin console

    I have a issue with node manager is reachable from admin console and from command prompt it is not connected and could not able to start the managed server.
    If i change /config/nodemanager/nm_password.properties plain text and restart it is not reachable in admin console abut can connect from command prompt. I could not able to start the even with this scenario.
    i see below error when try to check machine monitor tab.
    <Error> <NodeManager> <BEA-300033> <Could not execute command "getVersion" on the node manager. Reason: "Access to domain 'dom_11gint' for user 'Ckr10ycOJN' denied".>
    Ckr10ycOJN username in config.xml
    node manager and managed servers are not root user process.
    Please help me if have any suggestions.

    Pls. make sure the following points in your environment.
    1) Check '*nodemanager.domains*' file in <<WL_HOME>>\commo\nodemanager directory
         a) This file should have the entry for your domain 'dom_11gint'.
         b) Ensure the path referred in the nodemanager.domains file is correct one.
    2) Ensure the following remote server startup parameters are passed properly.
         a) In the Admin Console, Navigate Servers --> <<SERVER_NAME>> -->Configuration --> Server Start
         b) Pass the required Class Path, Arguments, User Name, Password(User name and Password to boot the managed servers)

  • Loading Planning attribute dimension alternate hierarchies with ODI

    Does anyone know how to load an attribute dimension alternate hierarchy via an ODI interface? I'm assuming that alternate hierarchies are allowed in attribute dimensions?
    Edited by: jayfin on Mar 28, 2011 5:59 PM

    If you are talking about created a shared hieararchy then no this is not possible as you shouldn't be able to do it in planning.
    If it is just another hierarchy in your attribute dimension then you should be able to load parent/child members to build it using ODI.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • HT1338 Unable to update 10.8.2 to 10.8.4 error in loading then restart does not work

    Hello, I was trying to update my iMAC to the newest 10.8.4 system by going through software update procedure. It took fifteen to download the update and then required a reboot to load. Once the reboot finished I get an message unable to update due to an error. Then when I click restart the systen freezes. I have to manually turn of and on the iMAC to get it up. The software update program still prompts me that an update is available but same deal when I go through this. Suggestions welcomed.
    Cheers

    Try updating by downloading from the Apple Downloads web page and running the OS X Mountain Lion Update v10.8.4 (Combo) uipdater. This link will take you to the download page.
    OT

  • "Could not load Shockwave Flash" error not solved from common fix.

    I am using Google Chrome as my web browser and I am getting the, "Could not load Shockwave Flash" error message. I have googled it and followed the common fix, however it does not fix anything. If I disable the plug-in then it prompts me to install Flash Player when I view videos and if I try to install Flash Player it tells me that I already have it installed, but it is disabled and to re-enable it. I've done about all I can think to do, please help?

    You cannot:
    -download
    -install
    -repair
    -update
    Flash Player for Chrome from here. Chrome uses a proprietary build called PepperFlash. It's modified by Google before they embed it and Adobe doesn't have downloads for it.
    You can try the following:
    1. Exit chrome, make sure it is not running
    2. Using Windows explorer go to C:\users\[user name]\AppData\local\Google\Chrome\User data\Pepperflash
    3. Delete the folders you see there
    4. Start chrome again.
    Notes:
    [user name] is your logon name.
    In order to access the AppData folder, you need to "Show Hidden Files and Folders" in your Folder Options.
    If those steps fail, the ONLY way to repair it is to uninstall and reinstall Chrome.

  • Unable to load staging area table in teradata from ODI

    Hi
    i'm unable to load data in Staging area in teradata. while loading i'm geeting following Error
    org.apache.bsf.BSFException: exception from Jython:
    Traceback (innermost last):
    File "<string>", line 9, in ?
    Load Error: See D:\CRM_MOD\/CRM_PRODUCT_SS_0.log for details
         at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
         at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt(SnpSessTaskSqlC.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
         at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
         at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
         at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
         at com.sunopsis.dwg.cmd.e.i(e.java)
         at com.sunopsis.dwg.cmd.g.y(g.java)
         at com.sunopsis.dwg.cmd.e.run(e.java)
         at java.lang.Thread.run(Unknown Source)
    please any one help me
    Thanks
    Edited by: user12079238 on Oct 19, 2009 1:17 AM

    Hi,
    I believe you made some mistake in the Phisycal Schema, quit the last "\" from there....
    Cezar Santos
    [www.odiexperts.com]

  • Certain customized features not copied from CS 5 to CS 5.5?

    Hi,
    I have another conversion question.
    I am on Mac OS 10.6.8 (snow leopard) and recently installed a trial version of CS 5.5. Customized document presets and customized workspaces that I created in CS5 are missing when I open CS5.5. There might be more customizations, too, but these are the two that I noticed so far.
    Does anyone know why this happened, and how I might fix it?
    Thanks,
    Neil

    Mike Witherell prepared a very nice summary for preferences and presets in InDesign CS3 & CS4. It's now slightly out-of-date but mostly still accurate. A link to it is found in this InDesignSecrets.com blog post:
    http://indesignsecrets.com/everything-you-ever-wanted-to-know-about-indesign-preferences-a nd-presets.php

  • Load Plan exception step variable

    Hi all,
    maybe you could be interested in.
    It is not possible refresh or overwrite a variable inside exception step. This is fantastic !
    http://docs.oracle.com/cd/E21764_01/relnotes.1111/e10133/odi.htm#CHDFFEFI
    So If I need to log an error I cannot use a parametric query. Great !

    Currently my packages have many steps, each step with a red failure arrow leading to this type of failure e-mail procedure -- lots of red arrows and many nearby copies of the failure e-mail procedure to eliminate the confusion.
    I had hoped that the Load Plan Exception feature would let me take all these red arrows out of my packages and move the e-mail failure reporting to the Exception step.

  • Load Plan Exception Finds no PrevStepLog Value

    import smtplib
    server = smtplib.SMTP('XXXmail')
    From = 'XXX'
    To = '#ERROR_RECIPIENT'
    Subject = ' '.join(['#Platform'
    ,'<%=snpRef.getSession("CONTEXT_NAME")%>'
    ,'<%=snpRef.getSession( "SESS_NAME" )%>'
    ,'<%=odiRef.getPrevStepLog("STEP_NAME")%>'
    ,'Failed'])
    MessageString = """<%=odiRef.getPrevStepLog("MESSAGE")%>"""
    MessageString = MessageString[:MessageString.find('\tat')]
    Message="From: %s\r\nTo: %s\r\nSubject: %s\r\n\r\n%s" % (From,To,Subject,MessageString)
    server.sendmail(From,To,Message)
    sends "No previous step log message" for a failing Load Plan step.
    How can I get the PrevStepLog value in a Load Plan Exception step?

    Currently my packages have many steps, each step with a red failure arrow leading to this type of failure e-mail procedure -- lots of red arrows and many nearby copies of the failure e-mail procedure to eliminate the confusion.
    I had hoped that the Load Plan Exception feature would let me take all these red arrows out of my packages and move the e-mail failure reporting to the Exception step.

  • File generating  fails in ODI console

    Hi All,
    I have tarnsefr data from db table to file,when executing through package its successfully generating the file ,but same scenario when i am executing from ODI console,I am getting file not found error,Any suggestions regarding this.....
    Thanks in Advance...

    If I understand, the target file is on a remote folder ?
    Of so, check if your ODI agent have access / privileges to this target folder. If it hasn't, that explains your issue.
    other thing :
    In local, I assume your are in a windows environment ? But is your agent installed on a windows machine, or an unix machine ?
    If your agent is on a unix machine, you can have a problem with the " / " or " \ " defined on your topology. Something like that can explain why the folder is not found with an unix command.
    In order to test that, launch your package from ODI Designer, but using alternatively "local agent" and the real agent (instead of going to ODI Console).

  • How to Configure ODI Console to Connect Multiple Master Repositories

    Hi,
    Can anybody help me in following,
    1. How to configure ODI Console to access Multiple Master Repositories and its corresponding Work Repository?
    2. Solutions are not supported by ODI Console? Is it possible to import scenarios as solutions in ODI Console?
    Thanks
    MT

    MT,
    1. I can only speak on my own experience in setting up the ODI console, but my understanding is that the console is configured against a single master repository - the connection details are picked up when the WebLogic server starts.  If I'm wrong, I'm sure one of the gurus will correct me.
    2. I haven't come across a way to do this - I'm using 11.1.1.5.  Aside from my initial go-live, I tend to only promote individual scenarios across environments.  For the rare occasion when I need to do a larger bulk import I'll just use ODI Studio.

  • Load plan not starting from point of failure in obia 11

    hi,
    I am using obia 11..1.1.7 & once load plan is started. few session are failed due to duplicates. After removal of duplicates, once i start load plan from configuration manager. It is starting again from start not from point of failure. I tried restarting load plan from ODI studio also from load plan & scanarios too but it again started from start not from point of failure.
    Can someone explain how to use ODI start from point of failure feature in OBIA.
    Thanks,
    Paresh

    JamesW wrote:
    That's exactly that. Shutdown the database. make the correction in the PFILE, started the DB using the PFILE and then created a new SPFILE .. Restarted the DB (using the SPFILE), restated the upgraded assist.. its not at 9% and running
    Pesky Oracle Thanks guys for your help
    FWIW, and for your future understanding, you didn't actually have to *start* the database with the pfile in order to create the spfile.
    In this example, I don't even have a database named fubar ...
    oracle:fubar$ pwd
    /u01/app/oracle/product/11.2.0/db_1/dbs
    2013-08-15 10:52:29
    oracle:fubar$ ls -l init*
    -rw-r--r-- 1 oracle oinstall 2851 May 15  2009 init.ora
    -rw-r----- 1 oracle oinstall   35 Jan 31  2013 initorcl.ora
    2013-08-15 10:52:36
    oracle:fubar$ ls -l spfile*
    -rw-r----- 1 oracle asmadmin 2560 Aug 15 10:47 spfilekilroy.ora
    2013-08-15 10:52:39
    oracle:fubar$ export ORACLE_SID=fubar
    2013-08-15 10:52:48
    oracle:fubar$ sqlplus / as sysdba
    SQL*Plus: Release 11.2.0.1.0 Production on Thu Aug 15 10:52:53 2013
    Copyright (c) 1982, 2009, Oracle.  All rights reserved.
    Connected to an idle instance.
    SQL> create spfile from pfile='init.ora';
    File created.
    SQL> exit
    Disconnected
    2013-08-15 10:53:05
    oracle:fubar$ ls -l spfile*
    -rw-r----- 1 oracle asmadmin 1536 Aug 15 10:53 spfilefubar.ora
    -rw-r----- 1 oracle asmadmin 2560 Aug 15 10:47 spfilekilroy.ora
    2013-08-15 10:53:07
    oracle:fubar$

  • Failure when connecting MS SQL SERVER from ODI ! could not load JDBS driver

    i have some trouble with connecting MS SQL SERVER from ODI.
    I have already downland jdbs driver 3.0 (and 2.0 ) and copy the sqljdbc4.jar to D:\oracle\product\11.1.1\Oracle_ODI_1\oracledi\agent\drivers( where the oracle jdbs driver is already exitst )....but i have this error :
    could not load JDBS driver class..
    thanks

    After more investigation and even more chocolate, we've identified the problem and it's now working. For anyone else who strikes this problem in future, here's something to check/consider/try:
    Even though Squirrel SQL Client was connecting and working ok using the MS JDBC driver (v 3.0), it recorded this in its logs:
    Cannot resolve the collation conflict between "SQL_Latin1_General_CP1_CI_AS" and "Latin1_General_CI_AS" in the INTERSECT operation.
    We've found that the open source jTDS driver does not have the same issue as the Microsoft one.
    We've installed the current jTDS driver, recorded the driver name (net.sourceforge.jtds.jdbc.Driver) and the JDBC URL (jdbc:jtds:sqlserver://<hostname>:1433/<database>) and the connection is now working fine.
    Hope this helps other people...
    Thanks to those of you who offered suggestions and things to check...much appreciated.
    Robyn

Maybe you are looking for