Load process ended with error DBIF_SETG_SQL_ERROR
HI,
WE ARE USING PROCEES CHAINS TO LOAD THE DATA FROM R/3 TO BW, BUT THE LAOD PROCESS ENDED WITH FOLLOWING ERROR "ABAP/4 processor:DBIF_SETG_SQL_ERROR".
Hi,
We face frequent DBIF_SETG_SQL_ERROR and also add_partition_failed error.
Tried to ensure that parallel processes are not occupying too much backgrnd processes, but still were unable to resolve the issue.
We are on Oracle 10.2.0.2.0 release. Any pointers on what we should look out for ?
Any oracle parameter settings that we might need to check?
Regards,
Vidya
Similar Messages
-
Process Chain Ended with Errors - cause unknown
I have had several instances of process chains stopping for no apparent reason. The stops occur between 2 master data infopackage loads. The last step is green and the next is grey. The PSA table has been updated successfully for the last step. All IDocs are in green status in both systems. The monitor for the last successful step does say "Ended with Errors" although no errors are evident. The process chain starts back up via Repeat at the next (grey) step and continues successfully. There were no system problems or connection interruptions that occurred during the time the process chains failed. There were no changes in the remote user profile.
This exact problem has occurred a half dozen times since our application of ECC Support Packs several months ago and had not occurred before. The infopackages are different each time. Two different process chains have had this problem. I have re-activated and re-scheduled the process chains without solving the problem.
Thanks for any ideas on why this may be occurring or what I can do to prevent it.
Patty MoffattHi Des,
Here's my BW release info:
SAP_ABA 640 0019 SAPKA64019 Cross-Application
SAP_BASIS 640 0019 SAPKB64019 SAP Basis
PI_BASIS 2005_1_6400009 SAPKIPYJ69 Basis Plug-In
ST-PI 2005_1_6400008 SAPKITLQH8 SAP Solution Tools Plug-
SAP_BW 350 0019 SAPKW35019 SAP_BW
ECC SPs 13-21 were applied before the BW problem started:
SAP_BASIS 640 0021 SAPKB64021
SAP_ABA 640 0021 SAPKA64021
PI_BASIS 2005_1_6400012 SAPKIPYJ6C
ST-PI 2005_1_6400008 SAPKITLQH8
SAP_BW 350 0021 SAPKW35021
PI 2004_1_5000016 SAPKIPZI6G
The process chain step and the monitor load both are green. The Details tab shows all the processing is green, but the Process Chain itself is red with "Errors Occurred. There have been no runtime dumps.
Patty -
Delete Indexes Variant ended with errors in Process chain
Hi experts,
I have a process chain which executes dialy to load data Info Cube we create the index and finally we delete the index after that we have few variants..
Remaining all variants are executed with out errors except delete index variant I checked the error message it shows that <b>" The system has not finished loading request APO_R46PWZHRIA7JS9NOM8X879QEZJ into data target ZUP_CARF1"</b>
It is so happened weekly twice or trice not every day. one day it was running with out any errors and one day this process chan was ended with errors.
I need to know the reason why this variant was executed with errors.?
I need your valule sugestions regarding this issue.
Regards
sailekhahi sailekha,
therevare some functional constraint of processes.
while deleting indexes
it is not possible to:
loading
indexes are being built
stastics are being built
during rollup
while compressing
while updating.
my be u can check which is the other process chain that does all above oprations in concerned infoprovider.
bye -
Transport control program tp ended with error code 0249
Hello guys,
I am facing an when importing transport. After I click import to the transport in STMS, before it runs, a message window is displayed immediately. This was working find until last week, any kind of transport is followed by the same error.
Transport control program tp ended with error code 0249
Message no. XT200
Diagnosis
An error occurred when executing a tp command.
Command: IMPORT BWDK903312 BIW client200 U0 pf=
sapbiw1a\s
Return code: 0249
Error text: connect failed due to DbSL load lib failure
Has anyone faced this error while trying to import a transport? I have not found the same error in sdn (0249)
help will be appreciated.
thanks
DGFYour are right, but which is the Basis forum?
Business Process Expert
Database & OS Platforms ABAP Development
Enterprise SOA Portal
Emerging Technologies
SAP Solutions
Business Intelligence
Scripting Languages
SAP Business One Industries
Community Discussions
SAP NetWeaver Application Server Integration and Certification Center (ICC) -
Payables Accounting Process Completing with Error
Hi All,
After running Payables Accounting Process I am getting error
Spawned Process 151662
MSG-00001: After SRWINIT
MSG-00002: Check that AX is not installed before calling the accounting engine
MSG-00003: AX is not installed, Calling the accounting engine
MSG-00004: After the call to AP_Accounting_Engine_Pkg.Do_Accounting
MSG-00005: Error occured in the accounting process
MSG-00006: Error Message:
REP-1419: 'beforereport': PL/SQL program aborted.
Inside Execute for Invoice_Canc_Event_Core
Inside Derive_Accounting_Entry for Invoice_Event_Core
Starting Accrual Basis Accounting for Invoice Event...
INSERTing Header into AP_AE_Headers ...
ORA-00001: unique constraint (AP.AP_AE_HEADERS_U2) violated occurred in
AP_ACCOU
NTING_MAIN_PKG.Insert_AE_HeaderAP_INVOICE_EVENT_CORE_PKG.Derive_Accounting_Entry
<-AP_INVOICE_CANC_EVENT_CORE_PKG.Execute<-AP_ACCOUNTING_MAIN_PKG.Create_Accounti
ng_Entry<-AP_ACCOUNTING_ENGINE_PKG.do_accounting<-APXAEREP
with parameters (&PAR
AMETERS)
while performing the following operation:
&DEBUG_INFO
End of log messages from FND_FILE
Program exited with status 1
Please suggest what could be the possible error, this is happening in Production so sort of urgent!
Thanks,
AnchorageDuplicate thread ..
Payables Accounting Process Completing with Error
Payables Accounting Process Completing with Error -
The report l runs very night and gets ended with error
Dear all,
I am facing a problem in solution manger. There is an report (Program/Command RDSMOPSOL_MONIREFRESH ) will runs very night and get ended with error and there is Run-time error "MESSAGE_TYPE_X".
Please suggest how to solve the problem.
Is this report is necessary for the system because it is not mention in the sap stand jobs.
SM37 log
Job started
Step 001 started (program RDSMOPSOL_MONIREFRESH, variant &0000000000875, user ID BASIS)
Opening and closing session started. Session SM2000000000065
Opening and closing the session was successful. Session: SM2000000000065
Opening and closing session started. Session SM2000000000005
ABAP/4 processor: MESSAGE_TYPE_X
Job cancelled
SM:CSA SESSION REFRESH
No. Program/Command Prog. type Spool list Parameter User Lang.
1 RDSMOPSOL_MONIREFRESH ABAP &0000000000876 BASIS EN
Sm21 log
00:00:50 DIA 00 000 SAPSYS EEA OPERATION MODES: Switch to operation mode Normal triggered
00:30:57 BTC 08 200 BASIS R68 Perform rollback
00:30:57 BTC 08 200 BASIS AB0 Run-time error "MESSAGE_TYPE_X" occurred
00:30:57 BTC 08 200 BASIS AB1 > Short dump "081112 003057 sapsm BASIS " generated
00:30:57 BTC 08 200 BASIS D01 Transaction Canceled 00 671 ( MESSAGE_TYPE_X 20081112003057sapsm BASIS 2001 )
00:30:57 BTC 08 200 BASIS R68 Perform rollback
00:30:57 BTC 08 200 BASIS AB0 Run-time error "MESSAGE_TYPE_X" occurred
Details
Recording at local and central time........................ 12.11.2008 00:30:57
Task................ 05312 . 08 B8 BTC background processor No. 08
User................ BASIS
Client.............. 200
Terminal............
Session............. 1
Transaction code....
Program name........
Problem class....... T Transaction Problem
Development class... SABP
Further details for this message type
Module name......... abdynpro
Line................ 1133
Error text.......... ab_jmess
Documentation for system log message AB 0 :
The specified runtime error has occurred in the system.
Parameter
a.. MESSAGE_TYPE_X
Technical details
File................ 000048
Position............ 0000253620
Entry type.......... l ( Error (Module, Row) )
Message ID.......... AB 0
Variable parts...... ab_jmess abdynpro1133
Time Ty. Nr Cl. User Tcod MNo Text Date : 12.11.08
00:30:57 BTC 08 200 BASIS AB1 > Short dump "081112 003057 sapsm BASIS " generated
etails
ecording at local and central time........................ 12.11.2008 00:30:57
ask................ 05312 . 08 B8 BTC background processor No. 08
ser................ BASIS
lient.............. 200
erminal............
ession............. 1
ransaction code....
rogram name........
roblem class....... K SAP Web AS Problem
evelopment class... SABP
BAP Mini dump
ate................ 20081112
ime................ 003057
ost................ sapsm
ser................ BASIS
ocumentation for system log message AB 1 :
A short dump was generated for the specified program termination.
You can analyze this short dump in the system log evaluation by
selecting this line or evaluating Table SNAP (Transaction ST22).
echnical details
ile................ 000048
osition............ 0000253800
ntry type.......... s ( ABAP Runtime Error )
essage ID.......... AB 1
ariable parts...... 081112003057sapsm BASIS
Time Ty. Nr Cl. User Tcod MNo Text Date : 12.11.08
00:30:57 BTC 08 200 BASIS D01 Transaction Canceled 00 671 ( MESSAGE_TYPE_X 20081112003057sapsm BASIS 2001 )
Details
Recording at local and central time........................ 12.11.2008 00:30:57
Task................ 05312 . 08 B8 BTC background processor No. 08
User................ BASIS
Client.............. 200
Terminal............
Session............. 1
Transaction code....
Program name........
Problem class....... K SAP Web AS Problem
Development class... SDYN
Module name.........
Location............
T100................ 00 671
Parameters..........
Documentation for system log message D0 1 :
The transaction has been terminated. This may be caused by a
termination message from the application (MESSAGE Axxx) or by an
error detected by the SAP System due to which it makes no sense to
proceed with the transaction. The actual reason for the termination
is indicated by the T100 message and the parameters.
Additional documentation for message 00 671
ABAP/4 processor: &
No documentation exists for message 00671
Parameter
a.. MESSAGE_TYPE_X
00:30:57 BTC 08 200 BASIS R68 Perform rollback
Details
Recording at local and central time........................ 12.11.2008 00:30:57
Task................ 05312 . 08 B8 BTC background processor No. 08
User................ BASIS
Client.............. 200
Terminal............
Session............. 1
Transaction code....
Program name........
Problem class....... W Warning
Development class... STSK
Further details for this message type
Module name......... thxxhead
Line................ 1240
Error text..........
Caller.............. ThIRoll
Reason/called....... roll ba
Documentation for system log message R6 8 :
An error has causes an SAP rollback. All database updates are reset.
Technical details
File................ 000048
Position............ 0000254520
Entry type.......... m ( Error (Function,Module,Row) )
Message ID.......... R6 8
Variable parts...... ThIRollroll bathxxhead1240
Regards,
ShivaHi karteek,
I have check there is Switch of operation mode but when I have checked the t-code sm63 there is no new mode are in normal mode.
There is one thing I want to ask dose this report (Program/Command RDSMOPSOL_MONIREFRESH ) run in your system or any one server because I have think there is some problem in job shued
and is also not mention in the sap stand jobs.
there is an error in sm21 in job.
BASIS SM36 EFK BP_CHECK_REPORT_VALUES: Invalid program values found. Reason:
BASIS SM36 EFC > Program RDSMOPSOL_MONIREFRESH has no variants, but a variant was specified
Is this SM37 log
Job started
Step 001 started (program RDSMOPSOL_MONIREFRESH, variant &0000000000875, user ID BASIS)
Opening and closing session started. Session SM2000000000065
Opening and closing the session was successful. Session: SM2000000000065
Opening and closing session started. Session SM2000000000005
ABAP/4 processor: MESSAGE_TYPE_X
Job cancelled
Sm21 log
SAPSYS EEA OPERATION MODES: Switch to operation mode Normal triggered
BASIS R68 Perform rollback
BASIS AB0 Run-time error "MESSAGE_TYPE_X" occurred
BASIS AB1 > Short dump "081111 003056 sapsm BASIS " generated
BASIS D01 Transaction Canceled 00 671 ( MESSAGE_TYPE_X 20081111003056sapsm BASIS 2001 )
BASIS R68 Perform rollback
BASIS R49 Communication error, CPIC return code 017, SAP return code 223
BASIS R64 > CPI-C function: CMINIT(SAP)
*BASIS SM36 EFK BP_CHECK_REPORT_VALUES: Invalid program values found. Reason:*
*BASIS SM36 EFC > Program RDSMOPSOL_MONIREFRESH has no variants, but a variant was*
specified
BASIS R68 Perform rollback
BASIS AB0 Run-time error "MESSAGE_TYPE_X" occurred
BASIS AB1 > Short dump "081111 220948 sapsm BASIS " generated
BASIS D01 Transaction Canceled 00 671 ( MESSAGE_TYPE_X 20081111220948sapsm BASIS 2001 )
Details Page 2 Line 6 System Log: Local Analysis of sapsm 1
Time Ty. Nr Cl. User Tcod MNo Text
00:00:51 DIA 00 000 SAPSYS EEA OPERATION MODES: Switch to operation mode Normal triggered
Details
Recording at local and central time........................ 13.11.2008 00:00:51
Task................ 04100 . 00 D0 Dialog work process No. 00
User................ SAPSYS
Client.............. 000
Terminal............
Session............. 1
Transaction code....
Program name........
Problem class....... S Operation Trace
Development class... SBTC
Sm63
Start/end time Name of the active operation mode
00.00 - 01.00 Normal
01.00 - 02.00 Normal
02.00 - 03.00 Normal
03.00 - 04.00 Normal
04.00 - 05.00 Normal
05.00 - 06.00 Normal
06.00 - 07.00 Normal
07.00 - 08.00 Normal
08.00 - 09.00 Normal
09.00 - 10.00 Normal
10.00 - 11.00 Normal
11.00 - 12.00 Normal
12.00 - 13.00 Normal
13.00 - 14.00 Normal
14.00 - 15.00 Normal
15.00 - 16.00 Normal
16.00 - 17.00 Normal
17.00 - 18.00 Normal
18.00 - 19.00 Normal
19.00 - 20.00 Normal
20.00 - 21.00 Normal
21.00 - 22.00 Normal
22.00 - 23.00 Normal
23.00 - 00.00 Normal
Regards, -
Transport control program tp ended with error code 0016
Hello colleagues,
We are getting the following error when exporting system HRP to HRI:
Transport program TP started successfully for HRPKX00005 21:25:45
| Transport control program tp ended with error code 0016
| Error exporting request HRPKT00005 00:59:50
| Program ended with error or warning, return code: F
| Runtime (seconds) : 13.876
| End of processing: 00:59:50
Please could you kindly help us to solve the issue?
Thanks in advance.
Best regards
Edited by: Víctor Barahona Cimas on Nov 12, 2009 3:33 PMok thanks
-
Transport control program tp ended with error code 0203
when i import queue and transport queue from dev to prd ,error show:
Transport control program tp ended with error code 0203
Message no. XT200
Diagnosis
An error occurred when executing a tp command.
Command: IMPORT DEVK900298 P01 clientP01 U0 pf=/usr/sap/tra
Return code: 0203
Error text: wrong syntax in tp call
Request: DEVK900298
System Response
The function terminates.
Procedure
Correct the error and execute the command again if necessary.Dear Allen,
The transport control program tp collects all return codes that occur when a tp command is executed. From all of these single return codes, a combined return code is calculated that tp outputs as a result at the end the command. During an import, for example, all return codes for individual import steps are handled. If a special return code does not occur, then the combined return code at the end is the maximum of individual return codes that occur. In addition to the value of the return code, tp also gives a short description of this return code. You can display this short description using the command explainrc.
Normally, all return codes that occur originate from individual transport steps. Since these individual return codes can only have the following values 0, 4, 6, 8, 12, 13, 14, 16, the combined return code also has one of these values. However, if a general error occurs, a single return code over 200 is generated. For example, this could arise if tp cannot establish a connection to the database. The maximum return code for all single transport steps is output in a separate message before specifying the combined returned code. In this case, the combined return code is always the return code of the general error message.
<b>tp Commands:</b>
tp addtobuffer <request> <sapsid>
As of Release 4.6A, an explicit addtobuffer command leaves the position of the entry unchanged, if the relevant transport request is already in the buffer. Only the status of the entry is changed:
Unconditional modes appearing in the command line are added to the unconditional modes in the buffer.
All the steps of the entry are re-initialized.
If the entry found is not an initial entry, the import step for the command file is set to *4000 .
Before you call this command and its options, consider the effects of changing the import sequence.
tp cleanbuffer <sapsid>
This deletes successfully imported change requests from the list of requests that are marked for import into the SAP System <SAPSID>. This function is contained in the commands tp import all <sapsid> and tp put <sapsid> .
tp delfrombuffer <request> <sapsid>
If the specified request is marked for import into the specified SAP System, this flag is deleted from the import list.
Before you call this command, consider the effects of changing the import sequence.
As of Release 4.6A: If a transport request was only partially imported, you can delete this type of transport request from the buffer. However, if a deleted transport request is placed in the buffer (without having been initially or completely imported), the attributes of the old entry are reactivated. This means the return codes, the unconditional modes and tags of the deleted entry appear in the new entry.
tp delstopmark <sapsid>
If the list of requests marked for import into the specified SAP System contains a STOP mark, the mark is deleted.
tp export <request>
This exports the complete request from the source system. This command starts the export of a request from the operating system level. Only use this command in exceptional cases. The SAP System uses the command expwbo to release requests from CTS transactions.
tp reformatbuffer <sapsid> [options]
This automatically reformats the entire buffer.
As of Release 4.5A, there are 2 different formats for buffer entries. (As of Release 4.5A, tp can work with both formats, and with a puffer containing heterogeneous entries. As of Release 4.6A, tp can work with 3 formats.)
However, in certain cases entries with the old formatting have to be reformatted during the normal run of tp . In this case, the entire buffer is automatically reformatted.
If you use the options downtorelease and Iagree for command reformatbuffer , you can format the buffer so that its formatting is compatible with an older release:
Option downtorelease <Release>
The command reformatbuffer with this option formats the buffer so that the formatting corresponds to the one used in an old release. This is necessary if tp writes buffer entries to the buffer of another system, but uses a buffer format that the transport control programs does not understand in this system.
Since older formats cannot store the same amount of information as the newer ones, some information contained in the original buffer may not be stored in the unformatted buffer. This may lead to data loss.
To avoid data loss, the original buffer is stored. In addition, you have the following functions:
Displaying the unformatted buffer (using showbuffer <SID> )
Displaying the original buffer (using showbuffer buffer=<SID>SAV )
Accepting the unformatted buffer (using reformatbuffer and the option Iagree yes )
Resetting the changes (using reformatpuffer and the option Iagree no )
If you call reformatpuffer using downtorelease , tp displays in detail if information was lost by reformatting, and what that information was. tp also names the commands that is has to execute to accept or reject the changes.
If you use the option downtorelease , you must also specify the option Iagree with yes or no . You cannot use the transport system until you decide to accept or reject the changes.
Option Iagree
Here are the following values for this option:
yes ( true )
Accept the change made by tp reformatbuffer <SID> downtorelease <rel>
In this case, tp deleted the buffer semaphore file that was lifted for security reasons at the first call of reformatbuffer
no ( false )
Reject the change made by tp reformatbuffer <SID> downtorelease <rel> In this case, tp copies the backup of the original buffer back and deletes the buffer semaphore file that was lifted for security reasons at the first call of reformatbuffer
tp setstopmark <sapsid>
A special STOP mark is added to the list of requests registered for import into the specified SAP System. The commands tp import all <sapsid> and tp put <sapsid> only process the requests in front of this stop mark.
If there is no stop mark, it is automatically generated by the commands
tp import all <sapsid> and tp put <sapsid> .
When all the requests in front of the stop mark have been imported successfully, at the end of all the calls the related marks and the mark itself are deleted.
A STOP mark can only be placed at the end of the change requests that have already been marked. In addition, it can only be set if no other mark of the same kind already exists.
tp showparams <sapsid>
This tp function displays which values the individual parameters of the transport profile have for the current SAP System.
tp verse <request>
This creates versions of the objects in the specified request. This transport step is contained in command export .
As of Release 4.5A, more actions that prepare the export are performed in this step.
Thanks and Regards,
Naveen. -
Transport control program tp ended with error code 0212 | URGENT
Hi All,
We are trying to import requests in our PRD system. As soon as we select the request and try to import it , we get the error "Transport control program tp ended with error code 0212".
This is tp version 305.12.42 (release 46D) for ANY database
/usr/sap/trans/cofiles/K915883.<SID> for transport: <SID>K915883: Permissio
HALT 20070222114323
ERROR: /usr/sap/trans/cofiles/K915883.<SID> : cant open
: Permission denied
ERROR: EXIT(16) -> process ID is: 6878
tp returncode summary:
TOOLS: Highest return code of single steps was: 16
ERRORS: Highest tp internal error was: 0212
Output from tools called by tp:
This is R3trans version 6.05 (release 46D - 18.10.01 - 11:30:00).
R3trans finished (0000).
When i checked the transport tool and rfc destinations, everything was successful.
When i tried to do tp connect -
23> tp connect <SID> pf=/usr/sap/tran/bin/TP_DOMAIN_<SID>.PFL
This is tp version 305.12.42 (release 46D) for ANY database
E-/usr/sap/tran/bin/TP_DOMAIN_<SID>.PFL could not be opened.
EXIT
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0212
tp finished with return code: 212
meaning:
could not access file as supposed (see SLOG for more details)
We are having SAP 4.6C with DB -Oracle and OS HP-UX.
Please let me know whow to rectifiy the issue. The situation here is getting worse.
Regards,
NKHi Ruchit, Sorry for the delay. Here is the file you wanted -
steic25q:root>ls
DOMAIN.CFG TPPARAM.bak TP_DOMAIN_ID1.PFL TP_DOMAIN_IQ1.PFL
TMS_TEST.IS1 TPPRAMA0918 TP_DOMAIN_ID1.orig nik.dev_evt
TPPARAM TP_DOMAIN_ID1.BAK TP_DOMAIN_IP1.BAK
steic25q:root>more TP_DOMAIN_ID1.PFL
#TMS:0078:DOMAIN_ID1
Caution !
This file was generated by the Transport Management System.
Do not change this file using a text editor.
For more information, refer to the online documentation of the
Transaction STMS.
If this file was destroyed, it can be regenerated in the TMS.
To do this, log on to the domain controller (system ID1) and call
transaction STMS. In the System Overview, you can distribute the TMS
configuration. This regenerates the file.
STMS -> Overview -> Systems -> Extras -> Distribute TMS configugration
TRANSDIR = /usr/sap/trans
DU1/CTC = 1
DU1/DUMMY = 1
DU1/NBUFFORM = 1
DU1/TP_VERSION = 266
DU2/CTC = 1
DU2/DUMMY = 1
DU2/NBUFFORM = 1
DU2/TP_VERSION = 266
ID1/CTC = 0
ID1/DBHOST = steic24q
ID1/DBLIBPATH = /usr/sap/ID1/SYS/exe/run
ID1/DBNAME = ID1
ID1/DBSWPATH = /oracle/ID1/817_64
ID1/DBTYPE = ora
ID1/NBUFFORM = 1
ID1/TP_VERSION = 266
IP1/CTC = 0
IP1/DBHOST = steic25q
IP1/DBLIBPATH = /usr/sap/IP1/SYS/exe/run
IP1/DBNAME = IP1
IP1/DBSWPATH = /oracle/IP1/817_64
IP1/DBTYPE = ora
IP1/NBUFFORM = 1
IP1/TP_VERSION = 266
IQ1/CTC = 1
IQ1/DBHOST = cbnysap2
IQ1/DBLIBPATH = /usr/sap/IQ1/SYS/exe/run
IQ1/DBNAME = IQ1
IQ1/DBSWPATH = /oracle/IP1/817_64
IQ1/DBTYPE = ora
IQ1/NBUFFORM = 1
IQ1/TP_VERSION = 266
TRN/CTC = 1
TRN/DUMMY = 1
TRN/NBUFFORM = 1
TRN/TP_VERSION = 266
steic25q:root> -
Re: Transport control program tp ended with error code 0212
Hi ,
When transport request is added to import queue, getting following error :
"Transport control program tp ended with error code 0212 "
Please find the slog file description as follows:
HALT 20110530001050
ERROR: /usr/sap/trans/cofiles/K904416.<SID>: cant open
: Permission denied
ERROR: EXIT(16) -> process ID is: 2273
HALT 20110530004629
ERROR: /usr/sap/trans/cofiles/K904416.<SID> : cant open
: Permission denied
ERROR: EXIT(16) -> process ID is: 14341
HALT 20110530004703
ERROR: /usr/sap/trans/cofiles/K904416.<SID> : cant open
: Permission denied
ERROR: EXIT(16) -> process ID is: 14514
How to correct this ?
Thanks
SrikanthHi,
It may happen happen due to permission issue when you are having SAN and sharing common trans directory now to check the permission of the file you have to login at os level and check the permission of the TR.
cd /usr/sap/trans/cofiles/
ls -l K904416<SID> - now here it will show the permission of the file please paste the output
Thanks,
Saleem -
Releasing a Transport Request ends with error code 0012.
Hi,
We have a Development system and a Production System (both running on separate windows machine) but they are not connected in STMS. We perform transporting of Requests at o.s level and NOT through STMS.
We are facing this new problem - We are trying to release a Transport Request in SE01 and it ends with error code 0012. The task inside the Request is released without any error. There is no Notes in SAP Marketplace for this.
Test call of transport control program (tp) ended with return code 0012
Message no. TK094
Diagnosis
Your transport request could not be exported, since all requirements were not fulfilled.
Calling the transport control program tp
"tp EXPCHK EFIK900025 pf=E:\usr\sap\trans\bin\TP_DOMAIN_EFI.PFL -Dtransdir=E:\usr\sa"
which checks the export requirements, returned the following information:
Return code from tp: 0012
Error text from tp: ERROR: Buffer check failed.
System Response
Further processing is terminated.
Procedure
Check the following points:
Feasibility of the transport control program tp
Parameter settings in the transport profile
Availability of the transport directory and the subdirectories (cofiles, data, log, sapnames, bin)
Write authorization for the subdirectories
Write authorization for the files of the subdirectories cofiles, data, log, sapnames
Release the request again when the error has been removed
Please help.
Regards,
Mohan.Hi Mohan,
Nice to hear that that your problem is resolved.
For Pamater CTC, please check the below links:
Automatic transport between DEV clients ?
http://sapsolutions.searchsap.com/kw;ExtendedTransportControl/content-sap.htm
Regards,
Hari Kishan -
ORA-00472: PMON process terminated with error
Hi,
I got this error in alert log.But the clients didn't complain they had a downtime.But in alert log I see the following.Why the db got restarted and why the clients could not notice it.Can somebody please reply why this has happened.
Mon Jul 18 12:28:02 2011
ARC1: terminating instance due to error 472
Mon Jul 18 12:28:03 2011
Errors in file /backups/p01/app/oracle/admin/plsprod/bdump/plsprod_lns1_3772752.trc:
ORA-00472: PMON process terminated with error
Instance terminated by ARC1, pid = 2306362
Mon Jul 18 12:28:52 2011
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 3
Autotune of undo retention is turned on.
IMODE=BR
ILAT =242
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.3.0.
System parameters with non-default values:
processes = 2000
shared_pool_size = 536870912
large_pool_size = 54525952
java_pool_size = 75497472
streams_pool_size = 54525952
control_files = /data/plsprod/p02/control01.ctl, /data/plsprod/p03/control02.ctl, /data/plsprod/p04/control03.ctl
db_block_size = 8192
db_cache_size = 104857600
compatible = 10.2.0.3
log_archive_dest_1 = location=/data/plsprod/archredo MANDATORY REOPEN
log_archive_dest_2 = SERVICE=talon_plsprod.travimp.com LGWR ASYNC NOAFFIRM REOPEN=60 NODELAY
log_archive_dest_state_1 = enable
log_archive_dest_state_2 = enable
standby_archive_dest = /data/plsprod/archredo
log_archive_format = redo_plsprod_%r_%t_%s.arc
log_buffer = 6120448
fast_start_mttr_target = 30
undo_management = AUTO
undo_tablespace = plsprod_undo
undo_retention = 1500
remote_login_passwordfile= EXCLUSIVE
db_domain = travimp.com
instance_name = plsprod
service_names = plsprod.travimp.com
local_listener = (ADDRESS=(PROTOCOL=TCP)(HOST=catalina)(PORT=1521))
background_dump_dest = /backups/p01/app/oracle/admin/plsprod/bdump
user_dump_dest = /backups/p01/app/oracle/admin/plsprod/udump
core_dump_dest = /backups/p01/app/oracle/admin/plsprod/cdump
session_max_open_files = 60
sort_area_size = 1048576
sort_area_retained_size = 1048576
db_name = plsprod
open_cursors = 100
os_authent_prefix =
pga_aggregate_target = 26214400
aq_tm_processes = 0
PMON started with pid=2, OS id=5623926
PSP0 started with pid=3, OS id=5566632
MMAN started with pid=4, OS id=5328992
DBW0 started with pid=5, OS id=4362640
DBW1 started with pid=6, OS id=4808940
LGWR started with pid=7, OS id=4358468
CKPT started with pid=8, OS id=4784160
SMON started with pid=9, OS id=4354538
RECO started with pid=10, OS id=4313420
MMON started with pid=11, OS id=4771908
MMNL started with pid=12, OS id=4743272
Mon Jul 18 12:28:53 2011
ALTER DATABASE MOUNT
Mon Jul 18 12:28:57 2011
Setting recovery target incarnation to 1
Mon Jul 18 12:28:57 2011
Successful mount of redo thread 1, with mount id 2894903685
Mon Jul 18 12:28:57 2011
Database mounted in Exclusive Mode
Completed: ALTER DATABASE MOUNT
Mon Jul 18 12:28:58 2011
ALTER DATABASE OPEN
Mon Jul 18 12:28:58 2011
Beginning crash recovery of 1 threads
parallel recovery started with 15 processes
Mon Jul 18 12:28:58 2011
Started redo scan
Mon Jul 18 12:28:58 2011
Completed redo scan
1696 redo blocks read, 56 data blocks need recovery
Mon Jul 18 12:28:58 2011
Started redo application at
Thread 1: logseq 17759, block 26354
Mon Jul 18 12:28:58 2011
Recovery of Online Redo Log: Thread 1 Group 1 Seq 17759 Reading mem 0
Mem# 0: /data/plsprod/p01/redo_t1_g1_f1.log
Mem# 1: /data/plsprod/p02/redo_t1_g1_f2.log
Mon Jul 18 12:28:58 2011
Completed redo application
Mon Jul 18 12:28:58 2011
Completed crash recovery at
Thread 1: logseq 17759, block 28050, scn 35195499598
56 data blocks read, 56 data blocks written, 1696 redo blocks read
Mon Jul 18 12:28:58 2011
LGWR: STARTING ARCH PROCESSES
ARC0 started with pid=29, OS id=4338022
Mon Jul 18 12:28:58 2011
ARC0: Archival started
ARC1: Archival started
LGWR: STARTING ARCH PROCESSES COMPLETE
ARC1 started with pid=30, OS id=1081522
LNS1 started with pid=31, OS id=5537854
Mon Jul 18 12:29:01 2011
Thread 1 advanced to log sequence 17760
Thread 1 opened at log sequence 17760
Current log# 2 seq# 17760 mem# 0: /data/plsprod/p01/redo_t1_g2_f1.log
Current log# 2 seq# 17760 mem# 1: /data/plsprod/p02/redo_t1_g2_f2.log
Successful open of redo thread 1
Mon Jul 18 12:29:01 2011
ARC0: STARTING ARCH PROCESSES
Mon Jul 18 12:29:01 2011
ARC1: Becoming the 'no FAL' ARCH
ARC1: Becoming the 'no SRL' ARCH
Mon Jul 18 12:29:01 2011
SMON: enabling cache recovery
Mon Jul 18 12:29:02 2011
ARC2: Archival started
ARC0: STARTING ARCH PROCESSES COMPLETE
ARC0: Becoming the heartbeat ARCH
ARC2 started with pid=32, OS id=5644370
Mon Jul 18 12:29:02 2011
ARC0: Standby redo logfile selected for thread 1 sequence 17759 for destination LOG_ARCHIVE_DEST_2
Mon Jul 18 12:29:02 2011
LGWR: Setting 'active' archival for destination LOG_ARCHIVE_DEST_2
Mon Jul 18 12:29:03 2011
Successfully onlined Undo Tablespace 16.
Mon Jul 18 12:29:03 2011
SMON: enabling tx recovery
Mon Jul 18 12:29:03 2011
Database Characterset is US7ASCII
replication_dependency_tracking turned off (no async multimaster replication found)
WARNING: AQ_TM_PROCESSES is set to 0. System operation might be adversely affected.
Completed: ALTER DATABASE OPEN
Mon Jul 18 12:29:58 2011
Shutting down archive processes
Mon Jul 18 12:30:03 2011
ARCH shutting down
ARC2: Archival stoppedHi CKPT,
Please find the output of the trace file as below.I deleted the repetitive output "Attempting to send buffer 0x111441d30 start block 91942 block count 84
total size to send 43008 blocksize 512" as it exceeds maximum length of 30000 characters in this post.
CATALINA_mardiprd>cat /backups/p01/app/oracle/admin/plsprod/bdump/plsprod_lns1_3772752.trc
/backups/p01/app/oracle/admin/plsprod/bdump/plsprod_lns1_3772752.trc
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
ORACLE_HOME = /p01/app/oracle10g/product/10.2.0.3
System name: AIX
Node name: catalina
Release: 3
Version: 5
Machine: 00044C5FD600
Instance name: plsprod
Redo thread mounted by this instance: 1
Oracle process number: 16
Unix process pid: 3772752, image: oracle@catalina (LNS1)
*** SERVICE NAME:() 2011-07-18 09:42:11.573
*** SESSION ID:(2189.1) 2011-07-18 09:42:11.573
*** 2011-07-18 09:42:11.573 57516 kcrr.c
LNS1: initializing for LGWR communication
LNS1: connecting to KSR channel
Success
LNS1: subscribing to KSR channel
Success
*** 2011-07-18 09:42:11.574 57569 kcrr.c
LNS1: initialized successfully ASYNC=1
Destination is specified with ASYNC=61440
*** 2011-07-18 09:42:12.577 71560 kcrr.c
Sending online log thread 1 seq 17731 [logfile 3] to standby
Opening logfile [logno 3]
Redo shipping client performing standby login
*** 2011-07-18 09:42:12.693 65194 kcrr.c
Logged on to standby successfully
Client logon and security negotiation successful!
Destination LOG_ARCHIVE_DEST_2 is in MAXIMUM PERFORMANCE mode
Archiving to destination talon_plsprod.travimp.com ASYNC blocks=20480
Allocate ASYNC blocks: Previous blocks=0 New blocks=20480
Log file opened [logno 3]
Attempting to send buffer 0x111441d30 start block 2 block count 1
total size to send 512 blocksize 512
Attempting to send buffer 0x111441d30 start block 3 block count 35
total size to send 17920 blocksize 512
*** 2011-07-18 09:42:27.009
Attempting to send buffer 0x111441d30 start block 38 block count 2914
total size to send 1491968 blocksize 512
*** 2011-07-18 09:42:50.007
Attempting to send buffer 0x111441d30 start block 2952 block count 2
total size to send 1024 blocksize 512
*** 2011-07-18 09:43:01.441
Attempting to send buffer 0x111441d30 start block 2954 block count 19286
total size to send 9874432 blocksize 512
Attempting to send buffer 0x111441d30 start block 22240 block count 19657
total size to send 10064384 blocksize 512
Attempting to send buffer 0x111441d30 start block 41897 block count 1687
total size to send 863744 blocksize 512
*** 2011-07-18 09:43:13.007
Attempting to send buffer 0x111441d30 start block 43584 block count 1
total size to send 512 blocksize 512
Attempting to send buffer 0x111441d30 start block 43585 block count 13
total size to send 6656 blocksize 512
Attempting to send buffer 0x111441d30 start block 43598 block count 19008
total size to send 9732096 blocksize 512
*** 2011-07-18 09:43:24.265
Attempting to send buffer 0x111441d30 start block 62606 block count 19349
total size to send 9906688 blocksize 512
*** 2011-07-18 09:43:25.524 72367 kcrr.c
Detected proper completion of online log
*** 2011-07-18 09:43:25.524 72204 kcrr.c
Detected physical end of file
Attempting to send buffer 0x111441d30 start block 81955 block count 10066
total size to send 5153792 blocksize 512
Online entry still exists for log 3 thr 1 seq 17731. Using it
Closing thread 1 sequence 17731 logno 3 nab 92021 los 35193489640 nxs 35193490559
*** 2011-07-18 09:43:26.686 71560 kcrr.c
Sending online log thread 1 seq 17732 [logfile 1] to standby
Opening logfile [logno 1]
Destination LOG_ARCHIVE_DEST_2 is in MAXIMUM PERFORMANCE mode
Archiving to destination talon_plsprod.travimp.com ASYNC blocks=20480
Log file opened [logno 1]
Attempting to send buffer 0x111441d30 start block 2 block count 20407
total size to send 10448384 blocksize 512
Attempting to send buffer 0x111441d30 start block 20409 block count 20349
total size to send 10418688 blocksize 512
Attempting to send buffer 0x111441d30 start block 40758 block count 19751
total size to send 10112512 blocksize 512
Attempting to send buffer 0x111441d30 start block 60509 block count 20260
total size to send 10373120 blocksize 512
*** 2011-07-18 09:43:33.262 72367 kcrr.c
Detected proper completion of online log
*** 2011-07-18 09:43:33.262 72204 kcrr.c
Detected physical end of file
Attempting to send buffer 0x111441d30 start block 80769 block count 11251
total size to send 5760512 blocksize 512
Online entry still exists for log 1 thr 1 seq 17732. Using it
Closing thread 1 sequence 17732 logno 1 nab 92020 los 35193490559 nxs 35193490735
*** 2011-07-18 09:43:33.541 71560 kcrr.c
Sending online log thread 1 seq 17733 [logfile 2] to standby
Opening logfile [logno 2]
Destination LOG_ARCHIVE_DEST_2 is in MAXIMUM PERFORMANCE mode
*** 2011-07-18 09:43:34.387
Archiving to destination talon_plsprod.travimp.com ASYNC blocks=20480
Log file opened [logno 2]
Attempting to send buffer 0x111441d30 start block 2 block count 19192
total size to send 9826304 blocksize 512
Attempting to send buffer 0x111441d30 start block 19194 block count 18876
total size to send 9664512 blocksize 512
Attempting to send buffer 0x111441d30 start block 38070 block count 19565
total size to send 10017280 blocksize 512
Attempting to send buffer 0x111441d30 start block 57635 block count 19765
total size to send 10119680 blocksize 512
*** 2011-07-18 09:43:41.660 72367 kcrr.c
Detected proper completion of online log
*** 2011-07-18 09:43:41.660 72204 kcrr.c
Detected physical end of file
Attempting to send buffer 0x111441d30 start block 77400 block count 14627
total size to send 7489024 blocksize 512
Online entry still exists for log 2 thr 1 seq 17733. Using it
Closing thread 1 sequence 17733 logno 2 nab 92027 los 35193490735 nxs 35193490800
*** 2011-07-18 09:43:41.928 71560 kcrr.c
Sending online log thread 1 seq 17734 [logfile 3] to standby
Opening logfile [logno 3]
Destination LOG_ARCHIVE_DEST_2 is in MAXIMUM PERFORMANCE mode
Archiving to destination talon_plsprod.travimp.com ASYNC blocks=20480
Log file opened [logno 3]
Attempting to send buffer 0x111441d30 start block 59038 block count 18758
total size to send 9604096 blocksize 512
*** 2011-07-18 09:44:42.141
*** 2011-07-18 09:44:42.141 72367 kcrr.c
Detected proper completion of online log
*** 2011-07-18 09:44:42.142 72204 kcrr.c
Detected physical end of file
total size to send 586240 blocksize 512
Online entry still exists for log 1 thr 1 seq 17744. Using it
Closing thread 1 sequence 17744 logno 1 nab 92029 los 35193494218 nxs 35193494529
*** 2011-07-18 09:45:58.974 71560 kcrr.c
Sending online log thread 1 seq 17745 [logfile 2] to standby
Opening logfile [logno 2]
Destination LOG_ARCHIVE_DEST_2 is in MAXIMUM PERFORMANCE mode
Archiving to destination talon_plsprod.travimp.com ASYNC blocks=20480
Log file opened [logno 2]
Attempting to send buffer 0x111441d30 start block 2 block count 9013
total size to send 4614656 blocksize 512
Attempting to send buffer 0x111441d30 start block 9015 block count 20176
total size to send 10330112 blocksize 512
Attempting to send buffer 0x111441d30 start block 29191 block count 19808
total size to send 10141696 blocksize 512
Attempting to send buffer 0x111441d30 start block 48999 block count 18939
total size to send 9696768 blocksize 512
*** 2011-07-18 09:46:10.146
Attempting to send buffer 0x111441d30 start block 67938 block count 19124
total size to send 9791488 blocksize 512
Attempting to send buffer 0x111441d30 start block 87062 block count 3690
total size to send 1889280 blocksize 512
*** 2011-07-18 09:46:12.644 72367 kcrr.c
Detected proper completion of online log
*** 2011-07-18 09:46:12.644 72204 kcrr.c
Detected physical end of file
Attempting to send buffer 0x111441d30 start block 90752 block count 1267
total size to send 648704 blocksize 512
Online entry still exists for log 2 thr 1 seq 17745. Using it
Closing thread 1 sequence 17745 logno 2 nab 92019 los 35193494529 nxs 35193494940
*** 2011-07-18 09:46:13.690 71560 kcrr.c
Sending online log thread 1 seq 17746 [logfile 3] to standby
Opening logfile [logno 3]
Destination LOG_ARCHIVE_DEST_2 is in MAXIMUM PERFORMANCE mode
Archiving to destination talon_plsprod.travimp.com ASYNC blocks=20480
Log file opened [logno 3]
Attempting to send buffer 0x111441d30 start block 2 block count 19533
total size to send 10000896 blocksize 512
Attempting to send buffer 0x111441d30 start block 19535 block count 11151
total size to send 5709312 blocksize 512
Attempting to send buffer 0x111441d30 start block 30686 block count 20154
total size to send 10318848 blocksize 512
*** 2011-07-18 09:46:20.822
Attempting to send buffer 0x111441d30 start block 50840 block count 19083
total size to send 9770496 blocksize 512
Attempting to send buffer 0x111441d30 start block 69923 block count 19167
total size to send 9813504 blocksize 512
*** 2011-07-18 09:46:22.573 72367 kcrr.c
Detected proper completion of online log
*** 2011-07-18 09:46:22.573 72204 kcrr.c
Detected physical end of file
Attempting to send buffer 0x111441d30 start block 89090 block count 2933
total size to send 1501696 blocksize 512
Online entry still exists for log 3 thr 1 seq 17746. Using it
Closing thread 1 sequence 17746 logno 3 nab 92023 los 35193494940 nxs 35193495191
*** 2011-07-18 09:46:23.637 71560 kcrr.c
Sending online log thread 1 seq 17747 [logfile 1] to standby
Opening logfile [logno 1]
Destination LOG_ARCHIVE_DEST_2 is in MAXIMUM PERFORMANCE mode
Archiving to destination talon_plsprod.travimp.com ASYNC blocks=20480
Log file opened [logno 1]
Attempting to send buffer 0x111441d30 start block 2 block count 8093
total size to send 4143616 blocksize 512
Attempting to send buffer 0x111441d30 start block 8095 block count 20288
total size to send 10387456 blocksize 512
Attempting to send buffer 0x111441d30 start block 28383 block count 18967
total size to send 9711104 blocksize 512
*** 2011-07-18 09:46:31.007
Attempting to send buffer 0x111441d30 start block 47350 block count 5237
total size to send 2681344 blocksize 512
Attempting to send buffer 0x111441d30 start block 52587 block count 20188
total size to send 10336256 blocksize 512
Attempting to send buffer 0x111441d30 start block 72775 block count 19167
total size to send 9813504 blocksize 512
*** 2011-07-18 09:46:37.430 72367 kcrr.c
Detected proper completion of online log
*** 2011-07-18 09:46:37.430 72204 kcrr.c
Detected physical end of file
Attempting to send buffer 0x111441d30 start block 91942 block count 84
total size to send 43008 blocksize 512
Online entry still exists for log 1 thr 1 seq 17747. Using it
Closing thread 1 sequence 17747 logno 1 nab 92026 los 35193495191 nxs 35193495503
*** 2011-07-18 09:46:37.501 71560 kcrr.c
Sending online log thread 1 seq 17748 [logfile 2] to standby
Opening logfile [logno 2]
Destination LOG_ARCHIVE_DEST_2 is in MAXIMUM PERFORMANCE mode
Archiving to destination talon_plsprod.travimp.com ASYNC blocks=20480
Log file opened [logno 2]
Attempting to send buffer 0x111441d30 start block 2 block count 2052
total size to send 1050624 blocksize 512
*** 2011-07-18 09:46:43.059
total size to send 8164352 blocksize 512
*** 2011-07-18 09:48:18.781
*** 2011-07-18 09:48:18.781 72367 kcrr.c
Detected proper completion of online log
**** 2011-07-18 09:48:18.781 72204 kcrr.c*
Detected physical end of file
Attempting to send buffer 0x111441d30 start block 90604 block count 1416
total size to send 724992 blocksize 512
Online entry still exists for log 2 thr 1 seq 17754. Using it
Closing thread 1 sequence 17754 logno 2 nab 92020 los 35193496751 nxs 35193496934
**** 2011-07-18 09:48:19.891 71560 kcrr.c*
*Sending online log thread 1 seq 17755 [logfile 3] to standby*
*Opening logfile [logno 3]*
Destination LOG_ARCHIVE_DEST_2 is in MAXIMUM PERFORMANCE mode
Archiving to destination talon_plsprod.travimp.com ASYNC blocks=20480
*Log file opened [logno 3]*
Attempting to send buffer 0x111441d30 start block 2 block count 19248
total size to send 9854976 blocksize 512
Attempting to send buffer 0x111441d30 start block 19250 block count 20166
total size to send 10324992 blocksize 512
Attempting to send buffer 0x111441d30 start block 39416 block count 4955
total size to send 2536960 blocksize 512
Attempting to send buffer 0x111441d30 start block 44371 block count 19903
total size to send 10190336 blocksize 512
*** 2011-07-18 09:48:30.215
Attempting to send buffer 0x111441d30 start block 64274 block count 19991
total size to send 10235392 blocksize 512
*** 2011-07-18 09:48:32.370 72367 kcrr.c
Detected proper completion of online log
*** 2011-07-18 09:48:32.370 72204 kcrr.c
Detected physical end of file
Attempting to send buffer 0x111441d30 start block 84265 block count 7754
total size to send 3970048 blocksize 512
Online entry still exists for log 3 thr 1 seq 17755. Using it
Closing thread 1 sequence 17755 logno 3 nab 92019 los 35193496934 nxs 35193498387
*** 2011-07-18 09:48:32.472 71560 kcrr.c
Sending online log thread 1 seq 17756 [logfile 1] to standby
Opening logfile [logno 1]
Destination LOG_ARCHIVE_DEST_2 is in MAXIMUM PERFORMANCE mode
Archiving to destination talon_plsprod.travimp.com ASYNC blocks=20480
Log file opened [logno 1]
Attempting to send buffer 0x111441d30 start block 2 block count 19214
total size to send 9837568 blocksize 512
*** 2011-07-18 09:48:40.267
Attempting to send buffer 0x111441d30 start block 19216 block count 19981
total size to send 10230272 blocksize 512
Attempting to send buffer 0x111441d30 start block 39197 block count 19586
total size to send 10028032 blocksize 512
Attempting to send buffer 0x111441d30 start block 58783 block count 6569
total size to send 3363328 blocksize 512
Attempting to send buffer 0x111441d30 start block 65352 block count 19894
total size to send 10185728 blocksize 512
*** 2011-07-18 09:48:47.133 72367 kcrr.c
Detected proper completion of online log
*** 2011-07-18 09:48:47.133 72204 kcrr.c
Detected physical end of file
Attempting to send buffer 0x111441d30 start block 85246 block count 6772
total size to send 3467264 blocksize 512
Online entry still exists for log 1 thr 1 seq 17756. Using it
Closing thread 1 sequence 17756 logno 1 nab 92018 los 35193498387 nxs 35193500455
*** 2011-07-18 09:48:47.344 71560 kcrr.c
Sending online log thread 1 seq 17757 [logfile 2] to standby
Opening logfile [logno 2]
Destination LOG_ARCHIVE_DEST_2 is in MAXIMUM PERFORMANCE mode
Archiving to destination talon_plsprod.travimp.com ASYNC blocks=20480
Log file opened [logno 2]
*** 2011-07-18 09:48:50.302
Attempting to send buffer 0x111441d30 start block 2 block count 18546
total size to send 9495552 blocksize 512
Attempting to send buffer 0x111441d30 start block 18548 block count 19821
total size to send 10148352 blocksize 512
Attempting to send buffer 0x111441d30 start block 38369 block count 20457
total size to send 10473984 blocksize 512
*** 2011-07-18 09:49:02.194
Attempting to send buffer 0x111441d30 start block 58826 block count 20477
total size to send 10484224 blocksize 512
Attempting to send buffer 0x111441d30 start block 79303 block count 12397
total size to send 6347264 blocksize 512
*** 2011-07-18 09:49:08.443 72367 kcrr.c
Detected proper completion of online log
*** 2011-07-18 09:49:08.443 72204 kcrr.c
Detected physical end of file
Attempting to send buffer 0x111441d30 start block 91700 block count 333
total size to send 170496 blocksize 512
Online entry still exists for log 2 thr 1 seq 17757. Using it
Closing thread 1 sequence 17757 logno 2 nab 92033 los 35193500455 nxs 35193504614
*** 2011-07-18 09:49:08.549 71560 kcrr.c
Sending online log thread 1 seq 17758 [logfile 3] to standby
Opening logfile [logno 3]
Destination LOG_ARCHIVE_DEST_2 is in MAXIMUM PERFORMANCE mode
Archiving to destination talon_plsprod.travimp.com ASYNC blocks=20480
Log file opened [logno 3]
Attempting to send buffer 0x111441d30 start block 2 block count 19640
total size to send 10055680 blocksize 512
*** 2011-07-18 09:49:15.005
Attempting to send buffer 0x111441d30 start block 19642 block count 12646
total size to send 6474752 blocksize 512
Attempting to send buffer 0x111441d30 start block 92000 block count 23
total size to send 11776 blocksize 512
*** 2011-07-18 11:30:19.515 72367 kcrr.c
Detected proper completion of online log
*** 2011-07-18 11:30:19.515 72204 kcrr.c
Detected physical end of file
Attempting to send buffer 0x111441d30 start block 92023 block count 11
total size to send 5632 blocksize 512
Online entry still exists for log 3 thr 1 seq 17758. Using it
Closing thread 1 sequence 17758 logno 3 nab 92034 los 35193504614 nxs 35194291751
*** 2011-07-18 11:30:21.546 71560 kcrr.c
Sending online log thread 1 seq 17759 [logfile 1] to standby
Opening logfile [logno 1]
Destination LOG_ARCHIVE_DEST_2 is in MAXIMUM PERFORMANCE mode
Archiving to destination talon_plsprod.travimp.com ASYNC blocks=20480
Log file opened [logno 1]
Attempting to send buffer 0x111441d30 start block 2 block count 24
total size to send 12288 blocksize 512
*** 2011-07-18 11:30:27.006
Attempting to send buffer 0x111441d30 start block 26 block count 1
total size to send 512 blocksize 512
Attempting to send buffer 0x111441d30 start block 27 block count 34
total size to send 17408 blocksize 512
Attempting to send buffer 0x111441d30 start block 61 block count 31
total size to send 15872 blocksize 512
*** 2011-07-18 11:30:39.003
Attempting to send buffer 0x111441d30 start block 92 block count 32
total size to send 16384 blocksize 512
Attempting to send buffer 0x111441d30 start block 124 block count 2
total size to send 1024 blocksize 512
Attempting to send buffer 0x111441d30 start block 126 block count 1
total size to send 512 blocksize 512
*** 2011-07-18 11:30:51.000
Attempting to send buffer 0x111441d30 start block 127 block count 1
total size to send 512 blocksize 512
Attempting to send buffer 0x111441d30 start block 128 block count 30
total size to send 15360 blocksize 512
Attempting to send buffer 0x111441d30 start block 158 block count 88
total size to send 45056 blocksize 512
Attempting to send buffer 0x111441d30 start block 246 block count 3
total size to send 1536 blocksize 512
*** 2011-07-18 11:31:03.002
Attempting to send buffer 0x111441d30 start block 249 block count 32
total size to send 16384 blocksize 512
Attempting to send buffer 0x111441d30 start block 27416 block count 4
total size to send 2048 blocksize 512
Attempting to send buffer 0x111441d30 start block 27420 block count 14
total size to send 7168 blocksize 512
Attempting to send buffer 0x111441d30 start block 27434 block count 54
total size to send 27648 blocksize 512
Attempting to send buffer 0x111441d30 start block 27488 block count 10
total size to send 5120 blocksize 512
*** 2011-07-18 12:27:01.000
Attempting to send buffer 0x111441d30 start block 27498 block count 78
total size to send 39936 blocksize 512
Attempting to send buffer 0x111441d30 start block 27576 block count 2
total size to send 1024 blocksize 512
Attempting to send buffer 0x111441d30 start block 27578 block count 56
total size to send 28672 blocksize 512
Attempting to send buffer 0x111441d30 start block 27634 block count 60
total size to send 30720 blocksize 512
*** 2011-07-18 12:27:14.006
Attempting to send buffer 0x111441d30 start block 27694 block count 7
total size to send 3584 blocksize 512
Attempting to send buffer 0x111441d30 start block 27701 block count 1
total size to send 512 blocksize 512
Attempting to send buffer 0x111441d30 start block 27702 block count 106
total size to send 54272 blocksize 512
*** 2011-07-18 12:27:28.001
Attempting to send buffer 0x111441d30 start block 27808 block count 2
total size to send 1024 blocksize 512
Attempting to send buffer 0x111441d30 start block 27810 block count 37
total size to send 18944 blocksize 512
Attempting to send buffer 0x111441d30 start block 27847 block count 2
total size to send 1024 blocksize 512
*** 2011-07-18 12:27:42.002
Attempting to send buffer 0x111441d30 start block 27849 block count 78
total size to send 39936 blocksize 512
Attempting to send buffer 0x111441d30 start block 27927 block count 43
total size to send 22016 blocksize 512
*** 2011-07-18 12:27:52.001
Attempting to send buffer 0x111441d30 start block 27970 block count 1
total size to send 512 blocksize 512
Attempting to send buffer 0x111441d30 start block 27971 block count 2
total size to send 1024 blocksize 512
Attempting to send buffer 0x111441d30 start block 27973 block count 38
total size to send 19456 blocksize 512
*** 2011-07-18 12:28:03.007
ORA-00472: PMON process terminated with error
Closing Redo Read Context
Redo Push Server: Freeing ASYNC PGA buffer
LNS1: Doing a channel reset for next time around...
Please help me out. -
Automatic imports throwing "tp ended with error code 0204"
Hello frnds !
In one of my non prod system, where automatic transport is enabled for 4 clients, we are getting tp error with 0204 error code in job jog of TMS_000000000*TMS_TP_IMPORT with report TMS_BCI_START_SERVICE.
Can you plz suggest someting ..
Release :
SAP_BASIS : 700 : SAPKB70013 : SAP Basis Component
Job log:
Job log overview for job: TMS_0000000005TMS_TP_IMPORT / 18003700
Job started
Step 001 started (program TMS_BCI_START_SERVICE, variant , user ID **)
Transport control program tp ended with error code 0204
Transport control program tp ended with error code 0204
Job finished
STMS errors :
System E40 Command Start TMS_TP_IMPORT
Client 000 Service Transport Service
User HP Start Hintergrund
Date 24.06.2009 Function TMS_TP_IMPORT
Time 18:00:58 Message TP_REPORTED_ERROR
Transport control program tp ended with error c
Errors: parameter is missing
System E40 Command Start TMS_TP_IMPORT
Client 000 Service Transport Service
User HP Start Hintergrund
Date 24.06.2009 Function TMS_TP_IMPORT
Time 18:00:58 Message TP_REPORTED_ERROR
************************************************************************************************************************Transport control program tp ended with error c
Errors: parameter is missing
This is tp version 372.04.40 (release 700)
Warning: Parameter DBLIBPATH is no longer used.
Warning: Parameter DBSWPATH is no longer used.
/usr/sap/trans_P40/tmp/SLOG0926.E40.LOC is already in use (1), I'm waiting 2 sec (20090624180056). My name: pid 18030 on er3asu72
(e40adm)
HALT 20090624180058
ERROR: Empty client(s) found in buffer E40. These entries cannot be filled implicitely.
Either use one of the options 'CLIENT' or 'DEFAULTCLIENT' or#use the command 'FILLCLIENT' to fill these entries with a valid client.
ERROR: EXIT(16) -> process ID is: 18030
tp returncode summary:
TOOLS: Highest return code of single steps was: 16
ERRORS: Highest tp internal error was: 0204
standard output from tp and from tools called by tp:
************************************************************************************************************************Thanks
AshishHi Vikas,
Could you please check the SLOG file and see what you observe
/usr/sap/trans_P40/tmp/SLOG0926.E40.LOC is already in use (1), I'm waiting 2 sec (20090624180056).
Please check the following Note 12746 - WARN <file> is already in use (), I'm waiting 5 sec.
Mostly you have to perform the following step mentioned in Note
"If there is only one tp process that writes the SLOG messages, stop this process and copy the generated file in tmp to the existing file in log on UNIX, for example, using cat /usr/sap/put/tmp/P<date>.<SID> >> /usr/sap/put/log/P<date>.<SID>Afterwards, you can delete the file in tmp and repeat the phase."
Before trying above you can also stop all tp process and then start the transport job again.
Thank You,
Praveen -
Client export SCC8 - ended with errors
Hi All,
It is very urgent. Please help!
I'm doing client export a Prod client and will import to a Dev client. I run the export SCC8 in background. The export job (SAP_ALL profile) was completed successfully in SM37. However in SCC3, I received error "End with errors". I drilled down the log then I see the following errors.
Command file......................... PRDKT00024
Customizing data .....................X
With application data................ X
Initialize and recreate......... X
Change documents are not copied
Transport control program tp ended with error code 0008
Transport program tp could not be started (RC= 0)
Program ended with error or warning, return code: F
Runtime (seconds) : 9,222
End of processing: 21:04:45
Could you please let me know if these are errors or they are okay to ignore? The export created a transport file PRDKT00024 about 3GB. I don't see the KX00024 and KO00024.
Is this a successfully export or not? please advise.
thanks,
bichloanHi All,
It is very urgent. Please help!
I'm doing client export a Prod client and will import to a Dev client. I run the export SCC8 in background. The export job (SAP_ALL profile) was completed successfully in SM37. However in SCC3, I received error "End with errors". I drilled down the log then I see the following errors.
Command file......................... PRDKT00024
Customizing data .....................X
With application data................ X
Initialize and recreate......... X
Change documents are not copied
Transport control program tp ended with error code 0008
Transport program tp could not be started (RC= 0)
Program ended with error or warning, return code: F
Runtime (seconds) : 9,222
End of processing: 21:04:45
Could you please let me know if these are errors or they are okay to ignore? The export created a transport file PRDKT00024 about 3GB. I don't see the KX00024 and KO00024.
Is this a successfully export or not? please advise.
thanks,
bichloan -
Client Export ended with errors
Hi All,
It is very urgent. Please help!
I'm doing client export a Prod client and will import to a Dev client. I run the export SCC8 in background. The export job (SAP_ALL profile) was completed successfully in SM37. However in SCC3, I received error "End with errors". I drilled down the log then I see the following errors.
Command file......................... PRDKT00024
Customizing data .....................X
With application data................ X
Initialize and recreate......... X
Change documents are not copied
Transport control program tp ended with error code 0008
Transport program tp could not be started (RC= 0)
Program ended with error or warning, return code: F
Runtime (seconds) : 9,222
End of processing: 21:04:45
Could you please let me know if these are errors or they are okay to ignore? The export created a transport file PRDKT00024 about 3GB. I don't see the KX00024 and KO00024.
Is this a successfully export or not? please advise.
thanks,
bichloanIn Al11 what does DIR_TRANS pointing to?
Make sure you have enough space there as it will export the 2 files to the transport directory.
Have you tried Remote Client Copy.
Thanks
Adil
Maybe you are looking for
-
Unable to see Bursting Control file in Data definition
I have installed the Patch 5968876. But I still dont see the upload Bursting Control File" Button . I see the new concurrent program XML Publisher Report Bursting Program being added, however Data definition screen is unchanged . Can someone pl advis
-
I charge my ipod to the computer and the adapter and it wont charge. i also have had it charged before and still wont work. Its like completly dead and annoying
-
Resolution of image in monitor window
How can I get the image in the monitor window to be as sharp as the image in the preview window in Premier Elements 10?
-
Customer statement PLD page numbers
Experts, I have a client who have a valid question on the page numbers on the Customer Statement Report (One page per customer) when this is run for multiple customers. Is there a way for this to print the page numbers at the bottom starting with 1 f
-
what is the structure of aggregates