Load program is read a wrong position

Hi all,
      I faced a problem as below:
     IDOC: 1000.00   1001000001
     When i upload the data to PSA, the error is "1000.00 1001" is not number.
     on the words, the program is read a wrong position and wrong value.
     And on the anther client of source system, it's OK.
     So it let me in trouble.
     who can tell me how to solve it???
     Thanks advance!!

HI Surendra ,
   Thanks for you reply.
   Because of failed load, So i can't find any inbound message.
   But i can make sure the problem is in BW system. And i test the case using RSA3, it's OK.
By the way, the system i used is 46C and BI7.0 IDES.

Similar Messages

Using Lightroom 4 w/ Windows 7. Recently started shooting w/ Sony camera .arw files. Lightroom cannot read the files. Loaded Adobe converter program onto the computer and this program cannot read the files either. Any suggestions?

Using Lightroom 4 w/ Windows 7. Recently started shooting w/ Sony camera that shoots .arw files. Lightroom cannot read the files. Loaded Adobe converter program onto the computer and this program cannot read the files either. Any suggestions?

Thnx again for the reply. The version of Lightroom I have is 4.0 (working w/Windows 7) This computer and all media files are kept off-line After doing more research, I downloaded DNG Converter 7.1This loaded into a .zip folder, which I am planning to install into the off-line computer andrun. Where does this folder go?
And will this set up work with my version of Lightroom?
What a pain. Makes me wanna go back to shooting .nef files for all stills
Thnx

Question for load VRML file with scale and position missed

Hi,
I trid to read a .wrl file from the "load VRML" vi, most simple .wrl models can be correctly read but for some more compliacted models their scales and positions were incorrect.
I attached the file which I read the .wrl file and a car model from Matlab Virtual Reality toolbox. The file can be read but their position and scale was missed. I check this model on other VRML readers and I believe the car model is correct. Does anyone know how to fix this problem?
Thanks,
-Alex
Attachments:
VRMLproblem.zip ‏88 KB

Hi Yi Y,
Thanks for your reply.
The attached files are the correct .wrl file and the one read from LabVIEW.
The colored is incorrect, the car is seperated to some parts, and the scale of some of the parts are wrong.
I think you can use any .wrl reader to read the wrl file I posted, all the reader I tried can read it successfully besides LabVIEW.
In the vi I have you can try to adjust the scale or rotate it then I think you can find the seperated car parts.
I will appreciate if you can give me any suggestion. Thanks,
-Alex
Attachments:
original.JPG ‏110 KB
readfromLabView.JPG ‏74 KB

Although all photos in my libraries are rotated to the correct orientation, random pictures still show up in the wrong position when viewed on Apple TV. Any suggestions?

Although all photos in my libraries are rotated to the correct orientation, random pictures still show up in the wrong position when viewed on Apple TV.
Any suggestions?

silvergc
Thanks for your comments
Several of our iPhone users in the UK reported the problem this morning, and as the Apple fan in the office I've got the job of resolving the issue
The original Excel was an old .xls file, but I have saved it as a .xlsx and the problem still appears
I haven't spoken with our developer yet, but I assume he has created the Excel file using some programming tools rather that directly using Excel
In the meantime I have created a simply spreadsheet with 8 cells contain values
In the first 4 cells, I have formatted them using Currency, and have used the currencies USD, DEM, GBP and CHF
In the remaining cells I have formatted them using the Accounting option, using the same currencies
When I review the spreadsheet on the iPhone (or iPad), the first 4 remain the same yet the last four all show the £ symbol
I have now changed the Region Format of the iPhone to United States, and when viewing on the iPhone the bottom 4 values are now all showing the $ sign!
If I had created the spreadsheet I would have put the Currency code in a seperate cell and purely used a numeric format for the number, and there would be no issue. That might be the only solution
Yes, the Director has the full MS Excel app on his Windows 8 device, but I can't expect all of our clients to go and do the same, in business many of them will have the iPhone
We may have to change the way we produce the report because of Apple's failings here, and it's not the first time that we have had to change something because Apple devices can't display them properly
In business, submitting a potential job contract only for the recipient to get the wrong idea of the costs is a major concern

How do I stop images being in the wrong position when I convert them to 3D shapes? (Ps CC)

I am trying to make a soda can using a label that I have drawn. Whenever I turn the image layer into a 3D soda can shape, the label stretches and is in the wrong position (only part of it is on the can), but I see no settings to adjust scaling and position of the image. How can I stop this happening? I am using Photoshop CC.

An image sequence import must start with identically sized files or the import will be based on the first image dimensions.
If your first image is 640X480 and the next image is 800X600 it will be scaled down to 640X480 at import. You also can't mix portrait and landscape images.
You could use software like Graphic Converter to "batch" export your images to the same scale.
Another method would be to use iPhoto (drag your folder of images to a new album). It can make nice slide show movies and it will "center" smaller images and scale others.

Crop/Trim Marks Wrong Position: Quark 6, PS File, Distiller 8 (Poster Sizes)

I am having a similar problem as a Quark 7 user making PDFs of posters:
http://www.adobeforums.com/webx?128@@.3c05836f
Acrobat Distiller 8 is moving my document's bottom trim marks into the wrong position. They appear too high on the PDF instead of all the way at the bottom.
1. Create 24"x36" document in Quark 6.52
2. Choose "File -> Export Layout as PDF"
3. Select crops and bleeds in Export Options
4. Save Postscript file to desktop
5. Drag and drop the .ps file onto Distiller 8
The resulting PDF has the bottom crop marks (trim marks) in the wrong position. If I drop the .ps file onto Distiller 4, Distiller 5, or Preview, the crop marks show up in the correct position.
Adobe Tech Support verified that the problem occurs in Distiller 8. They recommended that I upgrade to Distiller 9, which appears to be fixed.
My own workaround so far is to Print from Quark to the Adobe PDF 8.0 "printer" that gets installed with Acrobat. I can then manually set my page size to 25"x37" to fit the crop marks.
If anyone would like to see examples of the issue, or try it out for themselves, I have uploaded sample files to my web server.
Distiller 8 PDF:
http://www.jwgdesign.com/files/Poster-Test/Poster-Test-v8.pdf
Distiller 5 PDF:
http://www.jwgdesign.com/files/Poster-Test/Poster-Test-v5.pdf
Postscript File:
http://www.jwgdesign.com/files/Poster-Test/Poster-Test.ps
Quark File:
http://www.jwgdesign.com/files/Poster-Test/Poster-Test
ZIP archive of all files:
http://www.jwgdesign.com/files/Poster-Test.zip
If anybody else has ideas, please share them. I was hoping that there would be an update that addressed the issue, but it appears that Adobe will never fix this in Distiller 8 because they consider it "fixed" in Distiller 9.
For reference, I am using a Powermac G4 "Sawtooth" with a 1.2GHz G4 CPU, 1.25GB RAM, Mac OS X 10.4.11 "Tiger", Quark 6.52, and Creative Suite 3 Design Standard (CS3) with Acrobat Professional 8.1.2.

Indeed, if fixed in 9 then it will not be included in 8 ...
Jon
PS - have you thought about leaving off the marks from Quark and then
adding inside Acrobat within Print Production / Add Marks / ?

I have a problem in loading programs And display my me Hazh message (Plase contact itunes support to complete this transaction)

I have a problem in loading programs
And display my me Hazh message
(Plase contact itunes support to complete this transaction)

You need to contact iTunes Support. There is a "Contact Us" link at the bottom right of every page of the forums.
Best of luck.

Windows 7 users have no rights to load programs, but firefix loads. How?

We have lab computers and the users have no permissions to load programs. however, Firefox loaded. How is this possible?

Users can always use a portable Firefox version installed on an USB stick.
If you do not want users to have access to internet then you need to block that via a firewall or special proxy.
You can always rename files to circumvent measure that only look at file names.
* http://releases.mozilla.org/pub/mozilla.org/firefox/releases/latest/

Trading Partner Details load program

Does anyone know of a load program for XML Gateway Trading Partner details? I cannot find a .lct or api. I'm trying to avoid manual setup in new instances. My trading partner is setup, there is a load program for transactions, but I need to load the trading partner/transaction detail mappings.

I was able to get the details as shown in below code...
CalloutMessage cmIn = (CalloutMessage) input.get(0);
String fromParty = cmIn.getParameter("FROM_PARTY");
String toParty = cmIn.getParameter("TO_PARTY");
String documentType = cmIn.getParameter("DOCUMENT_NAME");
String action = cmIn.getParameter("ACTION_NAME");

Wrong position while the rendering process

I have a very curions problem with After Effects CS6. I just made a composition with different tracked images which are in a video footage. In the preview everything is shown correctly. But when I want to start to render the grafics are not shown respectively in the wrong position. For making you a better understanding of my problem I just want to describe the scene of the composition. It is a scene in which a little boy is going along a street. He passes a shop with large windows. On these windows I try to implement some graffities. Because of the fact that the camera moves I had to track the movement so that the graffities on the windows are moving with the rest of the picture. For the tracking I use zero-objects. Because the boy covers on some parts of the scene the windows I uses also some masks. It's a lot of masks and grafics/graffities. As I told you the preview shows me all compositions correctly. But not the rendering. It shows the grafics on the wrong positions and some grafics are completely hidden. I tried so many things for correcting it. Had it to do with the so-called "priority" of the different layers in the timeline? Thanks for helping me.

We need a screenshot or a complete description of your composition with all the properties of the layers and question revealed. Without details a solution to your problem is nearly impossible.
I have never had a render look different than my main composition Active camera view

Maos in ios6 is working extramly bad. I do not find streets and it shows the wrong position.

The new Map in IOS 6 is working very bad. It shows the wrong position on an adress and it do not find streets. For exempel Kärleksbacken 3 in Sollentuna Sweden.
Is there an update comming soon?
Maps in IOS 5 Fromm Google worked greate, so tjis is à Step down for Apple.
Best regard

If this is an iCloud account the Outbox only appears when sending an email, so if it is still trying I suppose it should be showing now (not sure though, hard to replicate this)
What type of email account?

My new hard drive does not allow me to load programs on my IMac. It doesn't recognize my administrator password. How can I correct it?

my new hard drive does not allow me to load programs on my IMac. It doesn't recognize my administrator password. How can I correct it?

Wrong forums. Try http://answers.microsoft.com/en-us/mac

Problems Loading Programs

Hi, I'm having some problems loading programs, specifically the game Neverwinter Nights 2.
It has been working fine for a month or so. Now when I click to load, the icon jumps a few times then nothing.
- I have reinstalled the game, but with no success.
- I have tried to repair the disk permissions in Safe Boot mode.
- I have unsuccessfully searched for Plist files connected to the game (found none).
- I have tried to load the game via a New Login account, with no success.
Im Reluctant to do an 'Archive and Install', as I have no idea where have my app disks are.
Has anyone an other idea's? Loosing the ability to play the game is annoying but I'm more worried that this may happen to other more important applications in the future!
Any help or suggestions would be appreciated!
Thank You!
Specs are.
10.4.11
2.16 Intel Core Duo
2gb 667
ATI Radeon X1600

Don't even think about deleting Quicktime, it's an integrated part of the OS.
If that (or any other) game is that important to you, and you are prepared to lose the security fixes in QT 7.6, then it is possible to revert to an earlier version of Quicktime:
If you wish to downgrade Quicktime to 7.5.5, (even though you will lose the important security fixes contained in the 7.6 update, and you will also find that parts of iTunes 7.6, iMovie and iChat may not now work without QT 7.6) there are two methods for doing this (note that attempting to manually delete Quicktime from your hard disk is doomed to failure. QT has components all over the place as it is used by many applications):
(Note: I am running 10.4.11. Some things may be different in Leopard, but the principle should be the same.)
First: Go to HD/Library/Receipts and drag the file QuickTime750_Tiger.pkg to the trash, and delete it.
1. Perform an Archive and Install process to remove all of the QuickTime update's (and potentially problem-causing) components, and replace them with the components of the older release. Unfortunately, this means you will lose some system settings and some or all third-party system add-ons. This method is therefore longwinded and inconvenient, but will ultimately work. Because QT is an integral part of OS X using an archive and install to also downgrade to a previous version of OS X so that the various versions can work in the intended tandem, is the safest way to do it. But there is also another way:
2. Install Quicktime 7.5. in such a way that it overwrites the QT 7.6 files without interfering with your other system settings and third-party add-ons. This can be done using a shareware (you can use it a few times for free, but worth paying for and having) application called Pacifist. This method works perfectly:
(Note that there separate QT 7.7.5 installer packages for Leopard and Tiger , and you can get them here:
For Panther: http://www.apple.com/support/downloads/quicktime74forpanther.html
For Tiger: http://support.apple.com/downloads/QuickTime7_5_5_forTiger
For Leopard: http://support.apple.com/downloads/QuickTime7_5_5_forLeopard
Make sure you download the correct version for your system!
If you don't have it already, download Pacifist from:
http://www.charlessoft.com/
and install it.
Open Pacifist, and drag the icon of the QT installer to the Pacifist window. This will have the 'open carton' icon. Click on this, then click Install from the top left-hand corner of the Pacifist menu. You will be asked if you want existing files replaced. Say yes to all. Job done!
You will now have Quicktime 7.5.5.x installed.
N.B. Repair permissions and restart both before and after installation.

Can I use onboard variables for load program delay?

I try to use the onboard function "load program delay" together with onboard variables. The program works and I could confirm with "read variable.flx" that the value has changed.
Versions: lv6x, flexmotion 5x

I am not sure I understand what the problem is. An onboard probgram using variables should work without any issues if you set a delay within it using the load program delay function.

Wrong positive spam on ipad

How can I tell apple that mails in my ipad junk folder are NOT spam, and how to avoid this in the future. It is more than enojing not to get electronic invoices and then have to pay extra cost for delayed payment - can I send these extra invoice to apple?
Explaining articles are for mac only but do not work for ipads.

Sorry, I did not tell about the app. It is the genuine bulit in mail with an account on me.com (icloud.com). The junk folder is created by this account automatically, and I cannot delete it. Once a wrong positive mail is selected there is no way to mark it as wrong positive, so this wrong verdict is avoided for that sender in the future, nor is there any other way to send it back to the SP (apple) to inform him about wrong filter settings and to coreect it.
Spam filtering is o.k. But I hate when other people evaluate my mails without telling me nor giving me the chance to correct and manage this myself.
Thanks anyway for your reply.

Load program is read a wrong position

Similar Messages

Maybe you are looking for