Load relationships from only one BP, from R/3 to CRM

Hello,
I have downloaded one BP from R/3 to CRM, but relationships (Employee responsible, Sales representative, Ship-to party, etc...) are not downloaded into this BP.
The individual employees, ship-to party, etc... already exist in CRM, but not appear as relationships into mentioned BP.
I created request with:
Adapter Object: CUSTOMER_REL
Objektklass:      BUPA
Table Name         KNVP
Field Name         KUNNR
Incl/Excl          I Inclusive defined set
Option             EQ Equality (= Low)
Low                'The R/3 customer number'
But when I start request this is downloading all relationships for all customers.
What I need add to the request or what I need to do in order to download only the relationships for only one specific BP (customer) ?
Regards
Juan

This is the request we run:
Request Name       REQ_CUST_REL
Table Name         <b>KNA1</b>
Field Name         KUNNR
Incl/Excl          I Inclusive defined set/array
Option             EQ Equality (= Low)
Low                0000144060
High

Similar Messages

In my iPad mini if I use earphones I can hear from only one side

In my iPad mini if I use earphones I can hear from only one side but the earphones work fine with other devices

Have you tried different headphones in your iPad mini?
Check in Settings > General > Accessibility if little slider half way down isn't moved to either side towards "L" or "R".
If it isn't , try to reboot the device, but it's likely that your audio port isn't working correctly. If so, it should definitely be covered by warranty.

"Can I select only one page from a PDF document to convert to an excel doc. ?"

"Can I select only one page from a PDF document to convert to an excel doc. ?"

No, so extract one page, then convert.

Why does my iphone send all text from only one of my contacts to my email?

Why does my iphone send all text from only one of my contacts to my email? I'm curious to know if anyone else has had this issue with the Iphone 5s...

imessage has a new setting that shows all emails associated with your apple id. There are two sections, send and receive. Since you are using the same apple id, Im sure if you adjust one of those settings to your mobile number instead of your appleid, it wont send double.
You might also have to adjust your wifes settings too, so those emails dont overlap

We have 2 iphones both synched to 1 ipad how do we reovw phone numbers from only one of the phones

We have 2 iphones and they are both synched to an ipad, how do we reomve phone numbers from only one of the phones without hte numbers being removed from the other phone

one can't sync iPhones with ipads
best you can do is to sync all with iclouds
if you do so and wish to stop syncing contacts with one of the iPhones you have set it not to sync contacts in the settings of the iPhone

Why can I copy music to my iPad or iPod touch from multiple computers but from only one computer using my iPhone?

Why can I copy music to my iPad or iPod touch from multiple computers but from only one computer using my iPhone?
IPads and iPod Touches don't seem to have the same media copying restriction that my iPhone has. My main computer is at home. I have music at home and at work and sometimes I like to add it to my iPhone from work. I can do this no problem using my iPad or my iPod touch, but when it comes to my iPhone, I can only copy music to it from my main computer.
Why would the iPhone have this restriction but not the other two devices?
ps. Where's my "add currently playing song to playlist" button? I can't even find a third-party music app with this feature.

Because...!
I've no idea why either.
Although it isn't normally possible to sync an iPod/iPad/iPhone with two computers (or manually manage an iPhone from more than one) it can be achieved if all computers have copies of the self same library. See Re: how do i sync on a second laptop without the data on my iPhone 5 being erased?
tt2

Ipod classic sound from only one channel

My 80GB Ipod classic has sound from only one headphone. Same problem when docked so it's not a headphone or socket problem. It's as if only one channel is working. Any ideas?

Did you check System Preferences>Sound to make certain that the balance scroll section was in the middle?
Clinton

Access oracle forms from only one computer

Hi,
We have an ERP software which is created by using Oracle Forms 4.5. We want to give an access to user to use the specified screen of our ERP program from only one computer. Apart from that no one should access the screen from any computer.
Is it possible to do that?
thanks

Upgrade all clients to Windows 7, and leave one with windows 2000 in place. The windows 7 clients most certainly won't be able to run a forms 4.5 application ;)
Why would you want to limit it to one computer? Isn't that what user accounts are for? Or are all users using the same account? You could of course check for the hostname of the client connected to the database:
CHE_TEST@tcp_asterix_impl> select sys_context('userenv', 'host') from dual;
SYS_CONTEXT('USERENV','HOST')
LINZ\CHE-WSBut this is not a very safe method, as I could boot a virtual machine with NAT so I don't get a name resolution conflict, name it like your machine and connect to the database. User accounts are protected by passwords, if I don't know the password I can't connect to the application (at least it's a little bit harder to hack a password then a hostname ;) )
cheers

HOW TO TRANSFER ONLY ONE APPLICATION FROM AN OLD MACHINE TO A NEW ONE

HOW TO TRANSFER ONLY ONE APPLICATION FROM AN OLD MACBOOK TO A MACBOOK PRO ?

THERE IS AN EASY WAY TO TRANSFER SONGS & PHOTOS
BETWEEN IPOD & IPHONE
SIMPLY USE TRANSPOD APPLICATION ON BOTH DEVICES
THEN
DO IT
(U HAVE TO BE ON THE SAME NETWORK)

How can I transfer only one song from itunes to my iphone?

How can I transfer only one song from itunes to my iphone without sync ( the whole library)?

Untick every thing you dont want to transfer, tick only the ones you do want to transfer.

SQL query to retrieve families with only one generation from a family db

Hi,
I need to write an SQL query that would select families with only one generation ((which means a person - or a married couple - with kids) or (a person - or a married couple - with parents but no kids)) from a database containing families. The simplified db structure is:
person:
id - int, primary key
siblings:
id
parent_id
kid_id
marriage
id:
husband_id
wife_id
Could anyone please help me? I dont really have any idea how to accomplish that...

Hi,
Welcome to the forum!
Assuming that siblings (despite its name) contains only parent-child relationships, and that the parent_id could be either the mother or the father:
WITH     got_tree     AS
     SELECT     CONNECT_BY_ROOT s.parent_id     AS root_id
     ,     LEVEL                     AS lvl
     FROM          siblings     s
     LEFT OUTER JOIN     marriage     m     ON     s.parent_id     IN ( m.husband_id
                                                        , m.wife_id
     START WITH     parent_id     NOT IN     ( SELECT kid_id
                                           FROM        siblings
     CONNECT BY     s.parent_id     IN ( PRIOR m.husband_id
                            , PRIOR m.wife_id
                            , PRIOR kid_id
SELECT       root_id
FROM       got_tree
GROUP BY root_id
HAVING       MAX (lvl)     <= 2
;This will get a list of parents who may or may not have children, but who do not have either parents or grandchildren.
To get their spouses and children (if any) you will have to join this result set to all the other tables. At that point, you can eliminate poeple who do not have ancestors themselves, but are married to people who have more than one generation of ancestors.
The details of how to do that depend on the details of your tables. If you'd like help, then post a little sample data (CREATE TABLE and INSERT statements for all tables) and the results you want from that data.
Edited by: Frank Kulash on Oct 14, 2009 4:05 PM
I'd need sample data in order to test this, of course.

Connectivity issue from only one computer

Let me start by saying i have 10 servers and about 15 workstations on this network. only one computer (my main computer) has this issue. all other computers work as they should.
This problem started to happen recently and randomly affecting RDP connections to 2 of 10 servers and now affects 5 of 10 servers. I am not sure i did anything to make the problem worse. Additionally I at first suspected it a DNS issue as connecting to the
ip address of effected computer as opposed to host name allows connection but as I said the issue is only on one computer. Looking at the logs below i am stumped.
ELECTRO4UBLADE
20499
Warning
Microsoft-Windows-TerminalServices-RemoteConnectionManager
Microsoft-Windows-TerminalServices-RemoteConnectionManager/Admin
3/18/2014 9:39:45 AM
Remote Desktop Services has taken too long to load the user configuration from server \\ADDS1.PDX.DAVISDARVISH.COM for user davis
RDPClient_SSL: An error was encountered when transitioning from TsSslStateDisconnected to TsSslStateDisconnected in response to 25 (error code 0x8000FFFF).

I'm experiencing the same issue, intermittently, when remotely using two of our eight SBS 2003 network computers via Remote Web Workplace. The two SBS computers are Windows 8.1 Pro 64 bit machines.
Intermittently, the RWW connection is lost and I'm returned to the RWW page with the message "VBScript Remote Desktop Disconnected...an internal error has occurred.
When the issue occurs, the Event logs on both SBS computers contain the Event ID 20499, Remote Desktop Services has
taken too long to load the user configuration from server XXXXX. The event is logged at the time the RWW connection is lost.
As the issue occurs with RDP sessions to Windows Server 2012 R2 (based on reports from others) and, in my case, SBS 2003,
perhaps the common element is Windows 8.1.

I had upgraded to firefox 3.0 years ago and lost my firefox 2.0 bookmarks. How do I retrieve them? I keep getting only one bookmark from the html file.

Years back I had installed Firefox 3.0 (at launch, so not beta) into a separate program folder. After installation, I expected to have my bookmarks saved. Recently I found out my bookmarks were in application data and I found out I had one profile. That meant that my firefox 2.0 bookmarks were replaced.
I read up on the FAQs and it stated that bookmark backups only save the previous 5 days or so, so I don't think they are usable though I have them saved. The bookmarks.html file in my profile shows only one bookmark after importing it into firefox 3.5 and firefox 2.0 (downgraded back to check it out), google chrome, and internet explorer. I still have the bookmarks.bak and bookmarks.html.bak files as well.
A little backstory before I got up to this point because it's a bit convoluted because I thought I could retrieve them like IE favorites which were easy:
1) Switched to Firefox 2.0 from Internet Explorer and got several hundred bookmarks.
2) Got HyperBookmarks add-on which bugged up and replaced my previous bookmarks folder though it stated in FAQs that my original Firefox 2.0 bookmarks were in a separate folder so I didn't worry about it.
3) Upgraded to Firefox 3.0 and it replaced all my bookmarks with nothing in bookmarks list. I thought it was saved because I installed Firefox 3.0 in a separate folder.
4) Retrieved 3.0 Bookmarks and Archived them, but wasn't able to find Firefox 2.0 Bookmarks (original) nor the HyperBK version, except in HyperBk Backups folder.

In the "Edit this Bookmark" window, use the 2nd drop-down button, that is to the right of the "Folder", to open a larger window that will allow more folder to appear. See the sloppy red arrow on the screenshot below.

SCAN LISTENER runs from only one node at a time from /etc/hosts !

Dear all ,
Recently I have to configure RAC in oracle 11g(r2) in AIX 6.1 . Since in this moment it is not possible to configure DNS, so I dont use SCAN ip into the DNS/GNS, I just add the SCAN ip into the host file like :
cat /etc/hosts
SCAN 172.17.0.22
Got the info from : http://www.freeoraclehelp.com/2011/12/scan-setup-for-oracle-11g-release211gr2.html#ORACLE11GR2RACINS
After configuring all the steps of RAC , Every services are ok except SCAN_LISTENER . This listener is up only one node at a time . First time when I chek it from node1 , it shows :
srvctl status scan_listener
SCAN listener LISTENER_SCAN1 is enabled
SCAN listener LISTENER_SCAN1 is running on node dcdbsvr1
now when I relocate it from node 2 using
"srvctl relocate scan -i 1-n DCDBSVR2" , then the output shows :
srvctl status scan_listener
SCAN listener LISTENER_SCAN1 is enabled
SCAN listener LISTENER_SCAN1 is running on node dcdbsvr2
Baring these , we have to try to relocate it from the node2 by the following way, then it shows the error :
srvctl relocate scan -i 2 -n DCDBSVR2
resource ora.scan2.vip does not exists
Now my question , How can I run the SCAN and SCAN_LISTENER both of the NODES ?
Here is my listener file (which is in the GRID home location) configuration :
Listener File OF NODE1 AND NODE 2:
==================================
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_SCAN1=ON
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER=ON
LISTENER_SCAN1 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC) (KEY = LISTENER_SCAN1)
ADR_BASE_LISTENER_SCAN1 = /U01/APP/ORACLE
2)
Another issue , when I give the command : " ifconfig -a " , then it shows the SCAN ip either node1 or node2 . suppose if the SCAN ip is in the node1 , and then if I run the "relocate" command from node2 , the ip goes to the Node 2 . is it a correct situation ? advice plz ... ...
thx in advance .. ...
Edited by: shipon_97 on Jan 10, 2012 7:22 AM
Edited by: shipon_97 on Jan 10, 2012 7:31 AM

After configuring all the steps of RAC , Every services are ok except SCAN_LISTENER . This listener is up only one node at a time . First time when I chek it from node1 , it shows :If I am not wrong and after looking at the document you sent, you will be able to use only once scan in case you use /etc/host file and this will be up on only one node where you added this scan entry in /etc/hosts file.
Now my question , How can I run the SCAN and SCAN_LISTENER both of the NODES ?Probably you can't in your case, you might run only one i think and on one node only
srvctl status scan_listener
SCAN listener LISTENER_SCAN1 is enabled
SCAN listener LISTENER_SCAN1 is running on node dcdbsvr1
now when I relocate it from node 2 using
"srvctl relocate scan -i 1 -n DCDBSVR2" , then the output shows :
srvctl status scan_listener
SCAN listener LISTENER_SCAN1 is enabled
SCAN listener LISTENER_SCAN1 is running on node dcdbsvr2You moved scan listener from node 1 to node 2, OK
Baring these , we have to try to relocate it from the node2 by the following way, then it shows the error :
srvctl relocate scan -i 2 -n DCDBSVR2
resource ora.scan2.vip does not exists
--------------------------------------------------------------------------------Since you have only one scan, you can't relocate "2". So ise "1" instead here also
FYI
http://www.oracle.com/technetwork/database/clustering/overview/scan-129069.pdf
Salman

I am getting only one record from table data

Hi Experts,
I am using interacive forms to bring the table data i used GET_STATIC_ATTRIBUTES_TABLE
method. initially the table is empty when i fill some records more than one it is giving me only one record.
where as i fill the table in wddoinit more than one record and try to retreived it, showing all the records more than one. waht is the reason.. if i fill manually why it is not bringing all the reocrds.
i have used the cardinatly as follows
1. parent node(no tables/structure used)
Dictionary structure       empty not used
Cardinality 1..1
Selection 0..1
Initialization Lead Selection Checked
Singleton    Not checked
Supply Function not used
2. table node(i used table type)
Dictionary structure    SFLIGHT_LIGHT
Cardinality 1..n
Selection 0..n
Initialization Lead Selection Checked
Singleton    Not checked
Supply Function not used
Pleae help me out...
Thanks,
Mahesh.Gattu

hi,
Use the following code for making the rows editable for a table UI element.
DATA lo_nd_cn_try TYPE REF TO if_wd_context_node.
DATA lo_el_cn_try TYPE REF TO if_wd_context_element.
DATA ls_cn_try TYPE wd_this->element_cn_try.
DATA ls_cn_try1 TYPE wd_this->elements_cn_try.
navigate from <CONTEXT> to <CN_TRY> via lead selection
lo_nd_cn_try = wd_context->get_child_node( name = wd_this->wdctx_cn_try ).
do 5 times.
clear ls_cn_try.
append ls_cn_try to ls_cn_try1.
lo_nd_cn_try->bind_table( ls_cn_try1 ).
enddo.
-> cn_try is the node which is binded with the Table UI element.
What all this is called as initialization of table. This code will make 5 rows editable, If u want more rows editable then run the loop according to the requirement.
U can write this code in the WDDOINIT.
Thanks,
Pankaj Aggarwal.

Load relationships from only one BP, from R/3 to CRM

Similar Messages

Maybe you are looking for