Load report failed vs2005 web application

Post Author: haz
CA Forum: Crystal Reports
Hi,
I am running Crystal Reports viewer on IIS6.0 and windows server 2003, which was installed using the redistributable package that comes along with Visual Studio 2005. We open these reports through a web based application 1 which is run on a different application pool on IIS. 
This  web application 1 has 2 parts - one is the normal data display quiries from the back end SQL server 2005 and the other is the Crystal Reports which also quires data from Oracle. At times i find that these reports all of them throw an error - Load Report Failed. At the same time the Part 1 of this application does work fine in showing the data that is queried from the database. Moreover at this stage, I dont find any errors in the Event viewer. If i restart this application pool alone, the reports starts working fine again.
I had gone through a few of the news groups and have made all the necessary permission related changes like the TEMP Folder, ASP.NET temporary folder, the folder in which the crystal reports is placed etc but still the same error throws up after some point in time. Wanted to know if there is any special configuration required on the Application pool when it comes to Crystal Reports. We have bout 10 to 15 users using this application for testing and it only throws this error at times and not always.
Looking forward to any kind of solution from your side.
Regards
Haz

And finally the stack trace.  Sorry for the length of these posts.
[COMException (0x800001f5): The Report Application Server failed]
   CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options) +0
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options) +126
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +575
[CrystalReportsException: Load report failed.]
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +646
   CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob) +1374
   CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename) +169
   Report_Viewer_Crystal_CrystalView.ConfigureCrystalReports() in c:\Inetpub\wwwroot\Report Viewer\Crystal\CrystalView.aspx.cs:49
   Report_Viewer_Crystal_CrystalView.Page_Init(Object sender, EventArgs e) in c:\Inetpub\wwwroot\Report Viewer\Crystal\CrystalView.aspx.cs:33
   System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +15
   System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +33
   System.Web.UI.Control.OnInit(EventArgs e) +99
   System.Web.UI.Page.OnInit(EventArgs e) +9
   System.Web.UI.Control.InitRecursive(Control namingContainer) +321
   System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +834

Similar Messages

  • Load Report Failed - Report Application Server Failed error at runtime

    Hello, I'm pretty new to Crystal Reports so please bear with me.
    I just installed CR 2008 on my development box, which is running VS2005 .NET 2.0.  I changed over all of my assembly references in my web.config to the new version:
    <add assembly="CrystalDecisions.Web, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
    <add assembly="CrystalDecisions.Shared, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
    <add assembly="CrystalDecisions.ReportSource, Version=12.0.2000.0, Culture=neutral,
    PublicKeyToken=692FBEA5521E1304"/>
    <add assembly="CrystalDecisions.Enterprise.Framework, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
    <add assembly="CrystalDecisions.Enterprise.Desktop.Report, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
    <add assembly="CrystalDecisions.ReportAppServer.Controllers, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
    <add assembly="CrystalDecisions.CrystalReports.Engine, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
    <add assembly="CrystalDecisions.Enterprise.InfoStore, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
    <add assembly="CrystalDecisions.Enterprise.Viewing.ReportSource, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
    Also the webpage that is displaying the ReportViewer object has this reference as well:
    <%@ Register Assembly="CrystalDecisions.Web, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"
        Namespace="CrystalDecisions.Web" TagPrefix="CR" %>
    Now, in my code behind I am simply trying to open a pre-built crystal report that came in the sample pack
    When I try and do this in our already built website I get an error:
    "Load report failed"
    With the inner exception saying:
    "The Report Application Server failed"
    This same piece of code works perfectly if I build a new website, however when I try and impliment this into our existing code base I get the error shown above.  Also the samples I've used all use .NET 3.5 and the website is in 2.0.  I'm not sure if that is a factor or not but that is also another piece of information that could be useful.
    Any help on this matter would be greatly appreciated.  Thank you for you're time.
    Chris McMahan
    Edited by: Arithal on Aug 4, 2009 8:36 PM

    And finally the stack trace.  Sorry for the length of these posts.
    [COMException (0x800001f5): The Report Application Server failed]
       CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options) +0
       CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options) +126
       CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +575
    [CrystalReportsException: Load report failed.]
       CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +646
       CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob) +1374
       CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename) +169
       Report_Viewer_Crystal_CrystalView.ConfigureCrystalReports() in c:\Inetpub\wwwroot\Report Viewer\Crystal\CrystalView.aspx.cs:49
       Report_Viewer_Crystal_CrystalView.Page_Init(Object sender, EventArgs e) in c:\Inetpub\wwwroot\Report Viewer\Crystal\CrystalView.aspx.cs:33
       System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +15
       System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +33
       System.Web.UI.Control.OnInit(EventArgs e) +99
       System.Web.UI.Page.OnInit(EventArgs e) +9
       System.Web.UI.Control.InitRecursive(Control namingContainer) +321
       System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +834

  • Crystal Reports with VS2005 - Load Report failed Error....

    Post Author: rajeshvijayan
    CA Forum: Older Products
    Hi,
    I am running Crystal Reports viewer on IIS6.0 and windows server 2003, which was installed using the redistributable package that comes along with Visual Studio 2005. We open these reports through a web based application 1 which is run on a different application pool on IIS. We have about 3 to 4 other web applications runing on the same IIS. All the other Web applications are working fine.
    This  web application 1 has 2 parts - one is the normal data display quiries from the back end SQL server 2005 and the other is the Crystal Reports which also quires data from SQL Server 2005. At times i find that these reports all of them throw an error - Load Report Failed. At the same time the Part 1 of this application does work fine in showing the data that is queried from the database. Moreover at this stage, I dont find any errors in the Event viewer. If i restart this application pool alone, the reports starts working fine again.
    I had gone through a few of the news groups and have made all the necessary permission related changes like the TEMP Folder, ASP.NET temporary folder, the folder in which the crystal reports is placed etc but still the same error throws up after some point in time. Wanted to know if there is any special configuration required on the Application pool when it comes to Crystal Reports. We have bout 10 to 15 users using this application for testing and it only throws this error at times and not always.
    Looking forward to any kind of solution from your side.
    Regards
    Rajesh

    Post Author: mikeeby
    CA Forum: Deployment
    Yes I too have been fighting this problem. I was using a XML Data file and schema file for my u201Cdatabase templateu201D in the report. I would then run my query using the .NET SQLClient then fill the report with my dataset table using the SetDataSource method from the ReportDocument object.
    I tried both embedded and runtime loaded reports all worked fine on my development machine but would NOT work on my production server. I use all the server installs, played with user rights, registering DLLu2019s still nothing.  I went as far as creating a winform app to fix the problem. I then had exactly the same problem, I was catching the error and it originated from the viewer control in both winform and webforms.
    What finally worked for me was to attach to the database using OLE DB instead of XML/schema (xml/xsd) datasource then pasting my SQL Query into the database connection command this gave me the fields to build the report. I actually used the u201CSet Database Locationu201D Dialog in Crystal Reports so I didnu2019t have to redesign my report. This dialog works very weird but I managed to figure it out. I then used an embedded report and all seem to be well. I think there is a problem with the Crystal Reports .NET Server Install and Merge Modules used with .NET with XML files, but I cannot be sure, all I know is this worked for me.
    I am concerned that if my database server is moved or renamed my report might break because the server connection is embedded in the report, but for right now it is working. I thought that was the reason for using the xsd file was to eliminate the dependence on a server connection in the report.
    Good luck and I hope this helps you fix your problem too. If it does please let me know I have see so many reports of people asking questions about this problem and it seems like most are left hanging.
    Mike

  • Error in report generation-Load report failed

    I have installed crystal reports  for VS2005 runtime in my live environment.When i try to load the report file from a .Net page i am getting the error'Error in Report generation-Load report failed'.
    This works fine in development and testing but when moved to production we are having issues.
    I believe i have a workaround i.e i need to open the rpt in a VS 2005 environment and re-write the connection string again.This fix had worked in development and testing when we had the same issue.
    But not sure if this is a known issue with crystal reports and if so do we have any hot fixes for the same.
    Please help.

    Hi Don,
    The reason why i posted the item on 'data Connectivity issues' is because i suspect the problem is with the connection string.Though i had provided the correct connection string,re-writing the connection string with the same info might help to fix the issue with loading the report.
    Does it mean that there is a problem in the connectivity?
    I have a risk here that i cant re-write the connection string..i.e to open the RPT file in VS2005 and bind it.The production web server & database server sits in a  third party environment and it is not in the company network.So i cant connect to this server to re-write from any other severs in the network.
    Is there any fix which can applied to the server to get this issue resolved?
    Cheers
    Nithya.

  • Crystal Reports Load report failed

    Hi all,
    Using VS2008. Crystal Reports 2008.
    I have a .net application which uses LINQ. I am required to integrate existing Crystal reports into the web site.
    In my web config file i have my connection string set up
    <add name="connection Name" connectionString="Data Source=ServerName;Initial Catalog=database;uid=username;password=Password;Integrated Security=SSPI" providerName="System.Data.SqlClient"/>
    and also I have set the authentication as follows:
    <authentication mode="Windows"/>
        <identity impersonate="true" userName="username" password="password"/>
    I need the impersonation for when I deploy my app to the server.
    The crystal report uses an existing connection set up when the report was created. So this is not tied to a LINQ table (i think this may be the problem).
    I have no clue how to progress from here. When I try to change the datasource location to the LINQ table within the application, it won't map properly as the table contains nullable values.
    Any ideas would be greatly appreciated.
    Louise

    Hi,
    That particular problem with 'Load Report Failed' was happening because the identity impersonation account I had set up did not have rights to my TEMP folder on my machine. Crystal needs to be able to read and write to that folder.
    I hope that helps you.
    Louise

  • Load report failed(crystal report) in client pc.

    Hi,
    we are getting error in crystal report
    1.Load report failed.See the end of this message for details on invoking
    just-in-time (JIT) debugging instead of this dialog box.
    Exception Text **************
    CrystalDecisions.Shared.CrystalReportsException: Load report failed. ---> System.Runtime.InteropServices.COMException (0x80004005): The system cannot find the path specified.
       at CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options)
       at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options)
       at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
       --- End of inner exception stack trace ---
       at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
       at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
       at CrystalDecisions.CrystalReports.Engine.ReportDocument.EnsureLoadReport()
       at CrystalDecisions.CrystalReports.Engine.ReportDocument.get_Database()
       at SAP_CR.MyForms.frmReportViewer.ConfigureCrystalReports()
       at SAP_CR.MyForms.frmReportViewer.frmReportViewer_Load(Object sender, EventArgs e)
       at System.Windows.Forms.Form.OnLoad(EventArgs e)
       at System.Windows.Forms.Form.OnCreateControl()
       at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
       at System.Windows.Forms.Control.CreateControl()
       at System.Windows.Forms.Control.WmShowWindow(Message& m)
       at System.Windows.Forms.Control.WndProc(Message& m)
       at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
       at System.Windows.Forms.ContainerControl.WndProc(Message& m)
       at System.Windows.Forms.Form.WmShowWindow(Message& m)
       at System.Windows.Forms.Form.WndProc(Message& m)
       at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
       at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
    Loaded Assemblies **************
    mscorlib
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
        CodeBase: file:///C:/WINDOWS/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
    SAP_CR
        Assembly Version: 2.0.0.6
        Win32 Version: 2.0.0.6
        CodeBase: file:///C:/Program%20Files/SAP/SAP%20Business%20One/AddOns/SAP_CR/SAP_CR.exe
    Interop.SAPbouiCOM
        Assembly Version: 8.0.0.0
        Win32 Version: 8.0.0.0
        CodeBase: file:///C:/Program%20Files/SAP/SAP%20Business%20One/AddOns/SAP_CR/Interop.SAPbouiCOM.DLL
    System.Windows.Forms
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
        CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
    System
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
        CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
    System.Drawing
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
        CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
    CustomMarshalers
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
        CodeBase: file:///C:/WINDOWS/assembly/GAC_32/CustomMarshalers/2.0.0.0__b03f5f7f11d50a3a/CustomMarshalers.dll
    Interop.CR_Crypto
        Assembly Version: 6.0.0.0
        Win32 Version: 6.0.0.0
        CodeBase: file:///C:/Program%20Files/SAP/SAP%20Business%20One/AddOns/SAP_CR/Interop.CR_Crypto.DLL
    System.Data
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
        CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.Data/2.0.0.0__b77a5c561934e089/System.Data.dll
    System.Configuration
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
        CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
    System.Xml
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
        CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
    System.Transactions
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
        CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.Transactions/2.0.0.0__b77a5c561934e089/System.Transactions.dll
    System.EnterpriseServices
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
        CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.EnterpriseServices/2.0.0.0__b03f5f7f11d50a3a/System.EnterpriseServices.dll
    CrystalDecisions.Windows.Forms
        Assembly Version: 12.0.2000.0
        Win32 Version: 12.0.2000.683
        CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/CrystalDecisions.Windows.Forms/12.0.2000.0__692fbea5521e1304/CrystalDecisions.Windows.Forms.dll
    CrystalDecisions.Shared
        Assembly Version: 12.0.2000.0
        Win32 Version: 12.0.2000.683
        CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/CrystalDecisions.Shared/12.0.2000.0__692fbea5521e1304/CrystalDecisions.Shared.dll
    CrystalDecisions.ReportSource
        Assembly Version: 12.0.2000.0
        Win32 Version: 12.0.2000.683
        CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/CrystalDecisions.ReportSource/12.0.2000.0__692fbea5521e1304/CrystalDecisions.ReportSource.dll
    CrystalDecisions.CrystalReports.Engine
        Assembly Version: 12.0.2000.0
        Win32 Version: 12.0.2000.683
        CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/CrystalDecisions.CrystalReports.Engine/12.0.2000.0__692fbea5521e1304/CrystalDecisions.CrystalReports.Engine.dll
    System.Web
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
        CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.Web/2.0.0.0__b03f5f7f11d50a3a/System.Web.dll
    CrystalDecisions.ReportAppServer.CommLayer
        Assembly Version: 12.0.1100.0
        Win32 Version: 12.0.1100.683
        CodeBase: file:///C:/WINDOWS/assembly/GAC/CrystalDecisions.ReportAppServer.CommLayer/12.0.1100.0__692fbea5521e1304/CrystalDecisions.ReportAppServer.CommLayer.dll
    CrystalDecisions.ReportAppServer.ClientDoc
        Assembly Version: 12.0.1100.0
        Win32 Version: 12.0.1100.683
        CodeBase: file:///C:/WINDOWS/assembly/GAC/CrystalDecisions.ReportAppServer.ClientDoc/12.0.1100.0__692fbea5521e1304/CrystalDecisions.ReportAppServer.ClientDoc.dll
    CrystalDecisions.ReportAppServer.DataSetConversion
        Assembly Version: 12.0.2000.0
        Win32 Version: 12.0.2000.683
        CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/CrystalDecisions.ReportAppServer.DataSetConversion/12.0.2000.0__692fbea5521e1304/CrystalDecisions.ReportAppServer.DataSetConversion.dll
    CrystalDecisions.ReportAppServer.DataDefModel
        Assembly Version: 12.0.1100.0
        Win32 Version: 12.0.1100.683
        CodeBase: file:///C:/WINDOWS/assembly/GAC/CrystalDecisions.ReportAppServer.DataDefModel/12.0.1100.0__692fbea5521e1304/CrystalDecisions.ReportAppServer.DataDefModel.dll
    CrystalDecisions.ReportAppServer.Controllers
        Assembly Version: 12.0.1100.0
        Win32 Version: 12.0.1100.683
        CodeBase: file:///C:/WINDOWS/assembly/GAC/CrystalDecisions.ReportAppServer.Controllers/12.0.1100.0__692fbea5521e1304/CrystalDecisions.ReportAppServer.Controllers.dll
    CrystalDecisions.ReportAppServer.CubeDefModel
        Assembly Version: 12.0.1100.0
        Win32 Version: 12.0.1100.683
        CodeBase: file:///C:/WINDOWS/assembly/GAC/CrystalDecisions.ReportAppServer.CubeDefModel/12.0.1100.0__692fbea5521e1304/CrystalDecisions.ReportAppServer.CubeDefModel.dll
    CrystalDecisions.ReportAppServer.ReportDefModel
        Assembly Version: 12.0.1100.0
        Win32 Version: 12.0.1100.683
        CodeBase: file:///C:/WINDOWS/assembly/GAC/CrystalDecisions.ReportAppServer.ReportDefModel/12.0.1100.0__692fbea5521e1304/CrystalDecisions.ReportAppServer.ReportDefModel.dll
    BusinessObjects.Licensing.KeycodeDecoder
        Assembly Version: 12.0.1100.0
        Win32 Version: 12.0.0.683
        CodeBase: file:///C:/WINDOWS/assembly/GAC/BusinessObjects.Licensing.KeycodeDecoder/12.0.1100.0__692fbea5521e1304/BusinessObjects.Licensing.KeycodeDecoder.dll
    CrystalDecisions.ReportAppServer.XmlSerialize
        Assembly Version: 12.0.1100.0
        Win32 Version: 12.0.1100.683
        CodeBase: file:///C:/WINDOWS/assembly/GAC/CrystalDecisions.ReportAppServer.XmlSerialize/12.0.1100.0__692fbea5521e1304/CrystalDecisions.ReportAppServer.XmlSerialize.dll
    System.Web.Services
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
        CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Web.Services/2.0.0.0__b03f5f7f11d50a3a/System.Web.Services.dll
    CrystalDecisions.Enterprise.Framework
        Assembly Version: 12.0.1100.0
        Win32 Version: 12.0.0.683
        CodeBase: file:///C:/WINDOWS/assembly/GAC/CrystalDecisions.Enterprise.Framework/12.0.1100.0__692fbea5521e1304/CrystalDecisions.Enterprise.Framework.dll
    CrystalDecisions.Enterprise.InfoStore
        Assembly Version: 12.0.1100.0
        Win32 Version: 12.0.0.683
        CodeBase: file:///C:/WINDOWS/assembly/GAC/CrystalDecisions.Enterprise.InfoStore/12.0.1100.0__692fbea5521e1304/CrystalDecisions.Enterprise.InfoStore.dll
    CrystalDecisions.Enterprise.Viewing.ReportSource
        Assembly Version: 12.0.1100.0
        Win32 Version: 12.0.1100.683
        CodeBase: file:///C:/WINDOWS/assembly/GAC/CrystalDecisions.Enterprise.Viewing.ReportSource/12.0.1100.0__692fbea5521e1304/CrystalDecisions.Enterprise.Viewing.ReportSource.dll
    CrystalDecisions.Web
        Assembly Version: 12.0.2000.0
        Win32 Version: 12.0.2000.683
        CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/CrystalDecisions.Web/12.0.2000.0__692fbea5521e1304/CrystalDecisions.Web.dll
    CrystalDecisions.ReportAppServer.Prompting
        Assembly Version: 12.0.1100.0
        Win32 Version: 12.0.1100.683
        CodeBase: file:///C:/WINDOWS/assembly/GAC/CrystalDecisions.ReportAppServer.Prompting/12.0.1100.0__692fbea5521e1304/CrystalDecisions.ReportAppServer.Prompting.dll
    Accessibility
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
        CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/Accessibility/2.0.0.0__b03f5f7f11d50a3a/Accessibility.dll
    JIT Debugging **************
    To enable just-in-time (JIT) debugging, the .config file for this
    application or computer (machine.config) must have the
    jitDebugging value set in the system.windows.forms section.
    The application must also be compiled with debugging
    enabled.
    For example:
    <configuration>
        <system.windows.forms jitDebugging="true" />
    </configuration>
    When JIT debugging is enabled, any unhandled exception
    will be sent to the JIT debugger registered on the computer
    rather than be handled by this dialog box.
    2.Error:could not load file or assemble crystal decisions.windows.forms,version=12.0.2000.0,culture=natural,public key token=692fbea5521ea1304' or one of it's dependencies.the system cannot find the file specified please help me solve this problem.some client pc there is no problem we installed all related to Crystal reports and merge modules and 2.8 managed files.
    regds,
    sampath.

    Hi Sampath,
    did you have this error only on clients pc or also on the server when you launch the report from Sab Business One? If only on clients did it occur on all clients?
    Iris

  • CR for VS2010 "Load report failed"

    like in "Load report failed" error with VS 2010 upgrade
    web application works fine on Dev but "Load report failed" when deployed to another server (Win2003 or Win2008r2 (fresh installs); latest CR redistributables; beta never existed on these servers).
    useLegacyV2RuntimeActivationPolicy set and full access (all the accounts and even to Everyone group now) granter to the Windows/Temp folder (temp report file is created under windows/temp).
    the Process Monitor show no "failed" access or something (worst is Name not Found)
    any suggestions where to look next?
    and just in case the exception (inner for the "load report failed"): "Unsupported Operation. A document processed by the JRC engine cannot be opened in the C++ stack.  clientdoc.dll"
    Edited by: Kirill.Y on Feb 21, 2011 2:25 PM

    finally identified where problem is:
    it happens if:
    1. project is Web Site
    2. you are trying to run web application from the "Published" code (all the checkboxes are unticked in the Publich dialog)
    3. code for the Report class is under App_Code folder
    4. report file (RPT) in subfolder, i.e. not under root
    P.S.: also: if embedRptInResource set to true, ResourceName from the class used to reference RPT file is ignored, i.e. RPT file generates code itself. So, the embedRptInResource must be set to false if you want to avoid such case
    In my case i just get rid of Report classes and moved RPT files into the App_Code folder (in one of subfolder under App_Code; and embedRptInResource=true).
    So, either keep everything under root or move RPT files into App_Code
    Btw, useLegacyV2RuntimeActivationPolicy is not required, i.e. in my case everything works just fine without it (.Net 4).
    Edited by: Kirill.Y on Feb 22, 2011 2:00 PM

  • "Load Report Failed" Error after upgrading to CR XI R2 and VS 2005

    Previously I had visual studio 2003 and crystal report XI and on my website project and I have this function where users can download their monthly statement. and it was working fine. here is my code of the function...
    Private Sub cmdStatement_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles cmdStatement.Click
            Dim pReport As New ReportDocument
            pReport = New ReportDocument()
            Try
                'Dim pTable As Table
                pReport.Load(Server.MapPath(".") & "\reports\MonthlyStatement.rpt")
                pReport.SetDatabaseLogon(dbUser, dbPassword, dbServer, dbDatabase)
                pReport.RecordSelectionFormula = "{CCMSC.CID}='" & mCID & "'"
                Dim pArray() As String =
                DataAccess.SqlPublic.ExecuteDataset(cnString, "webDownloadEStatement", pArray)
                Response.ClearContent()
                Response.ClearHeaders()
                Response.ContentType = "application/pdf"
                pReport.ExportToHttpResponse(CrystalDecisions.[Shared].ExportFormatType.PortableDocFormat, Response, True, "DebtHelper_" & mCID & "_MonthlyStatement")
                pReport.Dispose()
            Catch ex As Exception
                divMessage.Visible = True
                lblMessage.Text = ex.Message
            Finally
                pReport.Dispose()
            End Try
        End Sub
    Now, recently I upgraded my crystal to CR XI Release 2 SP6 and also upgraded my web project to Visual Studio 2005 with .NET 2.0. and now it gives me "report load failed" error on the very first line pReport.Load(......)
    The project has updated the references related to crystal reports to the 11.5 version from 11.0. Not sure what am I missing here.
    I have also opened the report file in the new crystal and saved it. I also opened it in Visual Studio itself and saved it.
    I would appreciate any help possible.
    Thanks
    Raj

    Hi! Ludek,
    I have tried to hard code the path. I checked the win/temp folder and the aspnet account already has the read/write permissions.
    Below is the detailed error message:
    Error Message: Load report failed.
    Page Error Occurred: /MyDebthelper/reports.aspx
    ExceptionType: System.Exception
    Inner Exception: System.Runtime.InteropServices.COMException (0x800001F5): The Report Application Server failed at CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options) at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options) at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
    Stack Trace: at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob) at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename) at MyDebthelper.reports.cmdStatement_Click(Object sender, EventArgs e) in C:\Documents and Settings\RBhavsar\My Documents\Visual Studio 2005\Projects\MyDebtHelper\MyDebthelper\reports.aspx.vb:line 83 at System.Web.UI.WebControls.Button.OnClick(EventArgs e) at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) at System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) at System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
    Thanks
    Raj
    Edited by: debthelper on Apr 30, 2010 5:21 PM

  • Crystal Report Error in Windows Server 2012 - Load Report Failed

    Badly needed help regarding the above topic. Thanks in advance for helping.
    We have a web application experiencing this error after deployment in WinServer 2012 IIS 8. Previously, the application was deployed in WinServer 2003 but we dont experience any errors like this. We tried searching the net for solutions and these are the following things we've try doing so far.
    - Installed Crystalreportsviewer13 64 bit in Server. After that, transferred the asp_net client folder in the IIS folder same level of our application.
    - We discovered that upon browsing the asp_net client in IIS itself, error 500.24 is appearing in the server. Checked the permission for folder asp_net client. Add IIS_USR permission read execute and write on the folder and still same Load Report Failed.
    - Next we tried integrating the crystalreportsviewer13 inside the application same Load Report Failed error.
    - Installed Service Pack 8 for CrystalReport but to no avail.
    Is there any way to get the real error behind the "Load Report Failed" error? Also, is there any other way to determine what else can be done to resolve this issue? Thanks in advance.

    Hi Jesse,
    Use a try/catch block and see if this gives you more info:
    catch (Exception ex)
        MessageBox.Show("ERROR: " + ex.Message + " ;" + ex.InnerException.Message);
    Response.write of course...
    Make sure you have permissions set for sharing the report folder also, could be simply a permission error on the report folder.
    Fiddler may give you more details also
    Don

  • Load report Failed, COMExpection: System cannot find the path specified

    Interesting problem:
    I have an application that runs on a web server (currently running it as simple test application to make solving this easier). We use a BO XI report to load data from the DB via a stored proc, then run an ExportToStream to get CSV data to return to the caller.
    It all works well as long as I run the application under the NT Account logged into the Box (W2k3, R2). But when using a different account (it's a domain admin account), it fails with the following error:
    System.Exception: Load report Failed. ---> System.Runtime.InteropServices.COMException (0x80004005): The system cannot find the path specified.
    at CrystalDecisions.ReportAppServer.ClienDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options)
    at CyrstalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod).
    The report is located on a file drive the openMethod is OpenReportByTempCopy. The Temp directory for the user (landes) exists on the box, all things seem to be in place.
    Anybody know that path is specified and how to overcome this?
    Thanks

    Will it be possible to check this registry key: HKEY_LOCAL_MACINE\SOFTWARE\Suite 11or11.5\Report Application Server\InprocServer\LocalConnectionMgr and verify if the ConnectionDirectoryPath is set to something like C:\ ?
    If not, set to C:\ and see how it goes after running your app.
    Cheers
    Alphonse

  • Load report failed - document cannot be opened in the c++ stack

    I am now receiving an error when trying to load a report into the report viewer. The error I am recieving is "Load report failed ... Unsupported operation. A document processed by the JRC engine cannot be opened in the C++ stack"
    <br />
    Here is the error stack:
    <br /><br/ />
    See the end of this message for details on invoking
    just-in-time (JIT) debugging instead of this dialog box.
    <br />
    Exception Text **************
    CrystalDecisions.Shared.CrystalReportsException: Load report failed. ---> System.Runtime.InteropServices.COMException (0x80041811): Unsupported Operation. A document processed by the JRC engine cannot be opened in the C++ stack.
       at CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options)
       at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options)
       at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
       --- End of inner exception stack trace ---
       at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
       at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
       at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename)
       at IPAM_Reporting.frmCrystalReport.frmCrystalReport_Load(Object sender, EventArgs e)
       at System.EventHandler.Invoke(Object sender, EventArgs e)
       at System.Windows.Forms.Form.OnLoad(EventArgs e)
       at System.Windows.Forms.Form.OnCreateControl()
       at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
       at System.Windows.Forms.Control.CreateControl()
       at System.Windows.Forms.Control.WmShowWindow(Message& m)
       at System.Windows.Forms.Control.WndProc(Message& m)
       at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
       at System.Windows.Forms.ContainerControl.WndProc(Message& m)
       at System.Windows.Forms.Form.WmShowWindow(Message& m)
       at System.Windows.Forms.Form.WndProc(Message& m)
       at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
       at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
    Loaded Assemblies **************
    mscorlib
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.5444 (Win7SP1GDR.050727-5400)
        CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
    IPAM_Reporting
        Assembly Version: 1.1.0.0
        Win32 Version: 1.0.0.0
        CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft/IPAM%20Reporting%20System/IPAM_Reporting.exe
    System.Windows.Forms
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
        CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
    System
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
        CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
    System.Drawing
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
        CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
    Infragistics2.Win.v10.3
        Assembly Version: 10.3.20103.1000
        Win32 Version: 10.3.20103.1000
        CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft/IPAM%20Reporting%20System/Infragistics2.Win.v10.3.DLL
    System.Xml
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
        CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
    Infragistics2.Shared.v10.3
        Assembly Version: 10.3.20103.1000
        Win32 Version: 10.3.20103.1000
        CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft/IPAM%20Reporting%20System/Infragistics2.Shared.v10.3.DLL
    Infragistics2.Win.UltraWinExplorerBar.v10.3
        Assembly Version: 10.3.20103.1000
        Win32 Version: 10.3.20103.1000
        CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft/IPAM%20Reporting%20System/Infragistics2.Win.UltraWinExplorerBar.v10.3.DLL
    Infragistics2.Win.UltraWinToolbars.v10.3
        Assembly Version: 10.3.20103.1000
        Win32 Version: 10.3.20103.1000
        CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft/IPAM%20Reporting%20System/Infragistics2.Win.UltraWinToolbars.v10.3.DLL
    Infragistics2.Win.UltraWinDock.v10.3
        Assembly Version: 10.3.20103.1000
        Win32 Version: 10.3.20103.1000
        CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft/IPAM%20Reporting%20System/Infragistics2.Win.UltraWinDock.v10.3.DLL
    System.Configuration
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
        CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
    Infragistics2.Win.Misc.v10.3
        Assembly Version: 10.3.20103.1000
        Win32 Version: 10.3.20103.1000
        CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft/IPAM%20Reporting%20System/Infragistics2.Win.Misc.v10.3.DLL
    Accessibility
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
        CodeBase: file:///C:/Windows/assembly/GAC_MSIL/Accessibility/2.0.0.0__b03f5f7f11d50a3a/Accessibility.dll
    Infragistics2.Win.UltraWinEditors.v10.3
        Assembly Version: 10.3.20103.1000
        Win32 Version: 10.3.20103.1000
        CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft/IPAM%20Reporting%20System/Infragistics2.Win.UltraWinEditors.v10.3.DLL
    SQLDatabaseConnectivity
        Assembly Version: 1.0.0.0
        Win32 Version: 1.0.0.0
        CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft/IPAM%20Reporting%20System/SQLDatabaseConnectivity.DLL
    System.Data
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
        CodeBase: file:///C:/Windows/assembly/GAC_32/System.Data/2.0.0.0__b77a5c561934e089/System.Data.dll
    System.Transactions
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
        CodeBase: file:///C:/Windows/assembly/GAC_32/System.Transactions/2.0.0.0__b77a5c561934e089/System.Transactions.dll
    System.EnterpriseServices
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
        CodeBase: file:///C:/Windows/assembly/GAC_32/System.EnterpriseServices/2.0.0.0__b03f5f7f11d50a3a/System.EnterpriseServices.dll
    System.Core
        Assembly Version: 3.5.0.0
        Win32 Version: 3.5.30729.5420 built by: Win7SP1
        CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Core/3.5.0.0__b77a5c561934e089/System.Core.dll
    CrystalDecisions.Windows.Forms
        Assembly Version: 13.0.2000.0
        Win32 Version: 13.0.0.99
        CodeBase: file:///C:/Windows/assembly/GAC_MSIL/CrystalDecisions.Windows.Forms/13.0.2000.0__692fbea5521e1304/CrystalDecisions.Windows.Forms.dll
    CrystalDecisions.Shared
        Assembly Version: 13.0.2000.0
        Win32 Version: 13.0.0.99
        CodeBase: file:///C:/Windows/assembly/GAC_MSIL/CrystalDecisions.Shared/13.0.2000.0__692fbea5521e1304/CrystalDecisions.Shared.dll
    CrystalDecisions.ReportSource
        Assembly Version: 13.0.2000.0
        Win32 Version: 13.0.0.99
        CodeBase: file:///C:/Windows/assembly/GAC_MSIL/CrystalDecisions.ReportSource/13.0.2000.0__692fbea5521e1304/CrystalDecisions.ReportSource.dll
    log4net
        Assembly Version: 1.2.10.0
        Win32 Version: 1.2.10.0
        CodeBase: file:///C:/Windows/assembly/GAC_32/log4net/1.2.10.0__692fbea5521e1304/log4net.dll
    System.Web
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
        CodeBase: file:///C:/Windows/assembly/GAC_32/System.Web/2.0.0.0__b03f5f7f11d50a3a/System.Web.dll
    CrystalDecisions.CrystalReports.Engine
        Assembly Version: 13.0.2000.0
        Win32 Version: 13.0.0.99
        CodeBase: file:///C:/Windows/assembly/GAC_MSIL/CrystalDecisions.CrystalReports.Engine/13.0.2000.0__692fbea5521e1304/CrystalDecisions.CrystalReports.Engine.dll
    CrystalDecisions.ReportAppServer.CommLayer
        Assembly Version: 13.0.2000.0
        Win32 Version: 13.0.0.99
        CodeBase: file:///C:/Windows/assembly/GAC_MSIL/CrystalDecisions.ReportAppServer.CommLayer/13.0.2000.0__692fbea5521e1304/CrystalDecisions.ReportAppServer.CommLayer.dll
    CrystalDecisions.ReportAppServer.ClientDoc
        Assembly Version: 13.0.2000.0
        Win32 Version: 13.0.0.99
        CodeBase: file:///C:/Windows/assembly/GAC_MSIL/CrystalDecisions.ReportAppServer.ClientDoc/13.0.2000.0__692fbea5521e1304/CrystalDecisions.ReportAppServer.ClientDoc.dll
    CrystalDecisions.ReportAppServer.Controllers
        Assembly Version: 13.0.2000.0
        Win32 Version: 13.0.0.99
        CodeBase: file:///C:/Windows/assembly/GAC_MSIL/CrystalDecisions.ReportAppServer.Controllers/13.0.2000.0__692fbea5521e1304/CrystalDecisions.ReportAppServer.Controllers.dll
    CrystalDecisions.ReportAppServer.DataDefModel
        Assembly Version: 13.0.2000.0
        Win32 Version: 13.0.0.99
        CodeBase: file:///C:/Windows/assembly/GAC_MSIL/CrystalDecisions.ReportAppServer.DataDefModel/13.0.2000.0__692fbea5521e1304/CrystalDecisions.ReportAppServer.DataDefModel.dll
    CrystalDecisions.ReportAppServer.DataSetConversion
        Assembly Version: 13.0.2000.0
        Win32 Version: 13.0.0.99
        CodeBase: file:///C:/Windows/assembly/GAC_MSIL/CrystalDecisions.ReportAppServer.DataSetConversion/13.0.2000.0__692fbea5521e1304/CrystalDecisions.ReportAppServer.DataSetConversion.dll
    CrystalDecisions.ReportAppServer.CubeDefModel
        Assembly Version: 13.0.2000.0
        Win32 Version: 13.0.0.99
        CodeBase: file:///C:/Windows/assembly/GAC_MSIL/CrystalDecisions.ReportAppServer.CubeDefModel/13.0.2000.0__692fbea5521e1304/CrystalDecisions.ReportAppServer.CubeDefModel.dll
    CrystalDecisions.ReportAppServer.ReportDefModel
        Assembly Version: 13.0.2000.0
        Win32 Version: 13.0.0.99
        CodeBase: file:///C:/Windows/assembly/GAC_MSIL/CrystalDecisions.ReportAppServer.ReportDefModel/13.0.2000.0__692fbea5521e1304/CrystalDecisions.ReportAppServer.ReportDefModel.dll
    JIT Debugging **************
    To enable just-in-time (JIT) debugging, the .config file for this
    application or computer (machine.config) must have the
    jitDebugging value set in the system.windows.forms section.
    The application must also be compiled with debugging
    enabled.
    For example:
    <configuration>
        <system.windows.forms jitDebugging="true" />
    </configuration>
    When JIT debugging is enabled, any unhandled exception
    will be sent to the JIT debugger registered on the computer
    rather than be handled by this dialog box.
    <br /><br /><br /><br />
    What could be the problem now.
    Edited by: mcontri on Apr 15, 2011 6:49 PM
    Edited by: mcontri on Apr 15, 2011 6:49 PM
    Edited by: mcontri on Apr 15, 2011 6:51 PM

    Hi Rama,
    Please search, this issue has been discussed many times before.
    For starter, see below doc.
    Troubleshooting error: "Unsupported Operation. A document processed by the JRC engine cannot be opened in the C++ stack…
    Thanks,
    Bhushan

  • Load Report Failed

    Hi All,
    I know this subject has been beaten to death on the internet, but I have some reports that generate invoices etc... I moved them from a VPS to my dedicated server, I have set this up hundreds of times with no problems.
    This time I am unable to resolve this problem and so I need your help.
    I have given all the correct users full access to the Windows/Temp folder and the web application folder.
    I have CRRedist2008_x86.msi installed on the server.
    I have checked that the report is found.
    I still get this error:
    Load report failed.
    at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob) at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename) at Admin_CreateAllInvoices.GetListToGenerate() in d:\www\247meeting.com\subdomains\w3\httpdocs\Invoices\CreateAllInvoices.aspx.cs:line 351
    Line 351 looks like this: invDoc.Load(fileName);
    fileName looks like this: 'D:\www\247meeting.com\subdomains\w3\httpdocs\Invoices\InvoiceNew.rpt'
    All the above checks out and is correct, but there is something I am missing. This all ran great on the VPS, but doesn't want to know on the new server.
    The server is running Win2k3 standard has 2 GB RAM and more than 280GB HDD free.
    Please help, this has cost me 6 hours so far and my hair is getting thinner.
    Thanks in advance,
    Lee Blake

    Hi,
    Yes I used Fiddler and ran it on both the server and my local machine. I have many reports that ran on all other machines, but I think I am missing something here.
    I uploaded the site, but already had the CR2008 redist installed, from the VS2008 install.
    As it didn't work, I uninstalled it and restarted the server.
    Reinstalled the runtime.
    Gave full rights to almost everyone for C:\Windows\Temp.
    And I still get the same error. Load Repot Failed.
    I'm giving Module a try as suggested above, I'll keep you posted, but where can I get it?
    Thanks
    Lee

  • Intermittent "Load Report Failed" error on IIS6 ASP 4.0

    I can run reports designed in Crystal 2011 and embedded in VS2010 designed web pages on a Windows 2003 SP2 server every day.  However, once every 2 - 3 days I get a "Load Report Failed - A document processed by the JRC engine cannot be opened in the C++ stack".  The first instance of this error causes all subsequent user access to Crystal Reports to fail with the same error.  When the ASP 4.0 application pool is recycled the error goes away.
    I was getting the "Load Report Failed" error due to "out of memory" I until made sure that the crystalreportviewer.dispose was run on exiting each report page. 
    Here is  how I run Crystal Reports:
       Protected Sub Page_Init(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Init
            If Not IsPostBack Then
                Dim myAL As New Hashtable
                myAL.Add("MO1", Request.QueryString("MONum1"))
                myAL.Add("MO2", Request.QueryString("MONum1"))
                Dim filename As String = ""
                filename = Server.MapPath("~/reports") + "\MfgPicklistByMO.rpt"
                Dim u As New CrystalUtilities
                Session("crViewer") = u.SetupReport(filename, myAL)
            End If
            CrystalReportViewer1.ReportSource = Session("crViewer")
        End Sub
       Public Function SetupReport(ByVal fileName As String, _
                     ByVal Params As Hashtable, Optional ByVal dbParam As Boolean = True) As   CrystalDecisions.CrystalReports.Engine.ReportDocument
            Dim objCrystalReportDocument As New CrystalDecisions.CrystalReports.Engine.ReportDocument
            objCrystalReportDocument.Load(fileName)
    .... logs onto a selected database, and loads paramters

    I have installed CrystalReportViewer1.Dispose() statements on all of the link events to navigate out of the pages with the CrystalViewer.  However, it turns out that several users are using the back arrow to navigate out of the page instead of the navigation links I have put on the page.
    I can't seem to find any event in ASPNET 4 that fires when the back arrow is pushed.  If I could find such an event I could put a CrystalReportViewer1.dispose statement there assuming CrystalReportViewer1 still has scope.    The Page_Disposed event does not fire when the back arrow is pushed.
    Environment:  VS2010, Crystall 2011, ASPNET 4.0

  • Load Report Failed - Server Only

    Hello,
    I have an asp.net C# application hosted on an Amazon EC2 server. I am trying to select a report using:
        ReportDocument rep;
        protected void Page_Load(object sender, EventArgs e)
            string reportPath = Server.MapPath((string)Utils.GetSessionNavigator(this).GetDataFromCurrentPage(PageParams.Reports.Report));
            if (!IsPostBack)
                rep = new ReportDocument();
            try
                if (!File.Exists(reportPath))
                    Response.Write("The specified report does not exist \n");
                rep.Load(reportPath);
                //LoadReport(rep);
                rep.SetDatabaseLogon("******", "******");
                this.CrystalReportViewer1.ToolPanelView = CrystalDecisions.Web.ToolPanelViewType.None;
                this.CrystalReportViewer1.HasToggleGroupTreeButton = false;
                this.CrystalReportViewer1.ReportSource = rep;
            catch (Exception ex)
                Response.Write(ex.Message);
        private void Page_Unload(object sender, EventArgs e)
            rep.Close();
            rep.Dispose();
    The report path is pointing towards my folder containing the reports, and the relevant file is being found with File.Exists, however upon using rep.Load, the exception message 'Load Report Failed" is being posted.
    I have installed the correct runtimes as I have another application running on the same server, and that isn't having the same issues. Perhaps the reportPath is different but I am not sure.
    Any advice would be greatly appreciated.
    Thank you.

    Glad that it worked.
    The cause is like a niddle in a haystack...:. I did remember seeing something like this and have a KB created for it but it is not available on SCN yet.
    1245654 - A Crystal Reports.NET web application deployed using the Visual Studio 'Publish' option, throws "Load Report Failed" error.
    Here is the solution from KB. (Works for VS 2010 too)
    Compile the web application in Visual Studio.
    On completion of the build as success, go to Build -> Publish Web Site.
    In Publish Web Site window, set the target location.
    Check the Allow this precompiled site to be updatable checkbox (by default it is unchecked).
    Check the Use fixed naming and single page assemblies checkbox (by default it is unchecked).
    Click OK to proceed ahead and publish the web application.
    Make sure that the Crystal reports in server machine are of the same size as the one in development machine, to ensure.
    But I still copy the CR reports manually.. but thats just my way.
    Thanks,
    Bhushan

  • Load Report fail when use impersonate="true" in dotnet config

    We have VS2005 and use Crystal 11.5. Our crystal report runs fine. When we set <identity impersonate="true" userName=".\user id" password="user password" />
    in our Web.Config file, the report show error "Load report fail".
    Could someone tells me why?
    Thanks
    Tony

    Hi Tony,
    Please check you are using impersonation in same way
    following line below under the <system.web > tag , as illustrated below
    <system.web>
    <identity impersonate="true"/>
    <authtorization>
    <allow users="?"/><authtorization/>
    This may be permission issue. Domain users need access to "C\Windows\Temp directory" and to the report directory try with giving permission .
    Hope this helps!!
    Regards,
    Shweta

Maybe you are looking for

  • Checking book quality before ordering

    Does anyone know how to verify that the PDF file transmitted when ordering a book accurately represents what you see when designing a book? Why I want a preview of the PDF... My order this year consisted of 3 large books and 3 extra-large books. Both

  • How to track updates in Master Table?

    hi all I have few Master tables like MRP Controllers , Asset Classes, reason for Investment etc.I have got the master tables that store these information. but standard IDocs are not present for those Master data. My requirement is , whenever new Mast

  • System restore and skype

    can you lose a skype contact after doing a system restore? thank you.

  • Crash Report: Preview Theme Crashes with Chrome

    Hi guys, Playing with the extension I discovered that if Chrome is your default browser (on iMac Lion) when you go to Commands>jQuery Mobile>Preview Theme it crashes Fireworks. I switched my system default browser to Firefox and Safari and it worked

  • Canon 7D Mark II fails to connect with LR 5.7 for tethered shoot.

    Canon 7D2 fails to connect with LR 5.7 for tethered shoot.   The camera connection does work with Canon EOS Utility. LR sees the camera but fails to establish and maintain connection.  See small video clip to view the camera and computer behaviour wh