Load Source File Names into Recordset Object

Hi,
I have a folder with abc.txt, xyz.txt, pqr.txt etc files.
My requirement is to load all the file names into a Record Set which I need to use in data flow.  I think I need to use For each loop container with Enumerator as 'Foreach File Enumerator' and in the variable mappings I have added a variable name
to get the file name. But I have stuck how to add these file names to a Record Set target. Please help me.
Thanks.

Hi Amaya14,
Go these this link Click Here
Thanks

Similar Messages

  • Getting the Source File name Info into Target Message

    Hi all,
    I want to get the Source file name Info into Target message of one of the fields.
    i followed Michal BLOG /people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
    Requirement :
    1) I am able to get the Target file name as same as the source file name when i check the ASMA in Sender & Receiver Adapter , with out any UDF...............this thing is OK
    2) I took One field extra in the target structure Like "FileName" & I mapped it Like
                              Constant(" " )--UDF-----FileName
    I Checked the Option ASMA in Both Sender & Receiver Adapters
    Here iam getting the Target File name as same as Source file name + Source File name Info in the Target Field " FileName".
    I Dont want to get the Target File name as same as Source file name. I want like Out.xml as Target file name.
    If i de-select the Option ASMA in Adapters means it is showing " null" value in the target field "FileName".
    Please Provide the Solution for this
    Regards
    Bopanna

    Hi All,
    Iam able to do this by checking the Option ASMA in only sender adapter itself
    Regards
    Bopanna

  • How do I map the source file name to a target table?

    I am mapping a source fixed length flat file to oracle target tables. One of the tables is a parent transaction table that stores the date, record number, status, etc. and the file name of the source flat file. The file name will change daily because the date is part of the naming convention. Is there an easy way to determine the source file name and map it?
    One option a co-worker is working on is writing a pre-mapping stored procedure. It would insert the file name into a table prior to the mapping. But I was hoping for a cleaner solution.
    Thanks!

    Hi
    Use extarnel table to load the data from the file into the table.
    Create a procedure which changes the external table definition as the filename chnages.
    Use this proceudre in the mapping as a premapping process.
    Ott Karesz
    http://www.trendo-kft.hu

  • Pdf portfolio source file name and date in file details

    Is it possible to import the source file name and extension as well as the source file created date in the portfolio file details?  Need to document source to portfolio in working with 3rd parties that will only have the original source.  Need to document what was converted into pdf as not all files in a directory will successfully convert to pdf.  Sometimes need to convert 100's of files.  Manual entry is inefficient.  the file names and modified dates are displayed on the Combine Files dialog.  is there a way to capture the detail on that page?

    I don't need the detail of when the pdf was added to the portfolio.  I
    need know which dwg or jpg or word file was converted and the original
    created date of that file for control of information.
    That is impossible; sorry. For some *very specific* types of conversion to PDF the pdfx:SourceModified XMP tag will be set to show the last-modification date of the source file (for example DOCX files converted using MS Word), but there will never be a human-readable record of the source filename or its creation date unless you have manually added them as document XMP properties after conversion (this is what the "Custom Properties" dialog is for). To embed source data automatically would raise no end of privacy and security problems for customers, who most certainly do NOT want their recipients seeing details of internal documents.
    Without writing a plugin there's no access to the internal workflow of the Combine Files dialog, so you cannot use a script to read the names and dates of the files *before* conversion and store them automatically in the new PDF Portfolio's Fields array.

  • Get source file name in the structure itself or in the payload

    Hi everyone,
    I have a task regarding mapping
    In my  structure , i defined a field for Filename . What I need is, what ever source file name am sending, that should be mapped into this filed.
    If am sending inputfile.txt.
    My output file should appear like this,
    <?xml version="1.0"?>
             <message id=u201DmessageIDu201D>
                     <header>
                             <filename>D:\\inputfile.txt</filename>
                     </header>
                     <body>
                              FileContent
                     </body>
             </message>
    Any help would be appreciated. Do I need to create any UDF. If So please provide.
    Regards,
    Varun

    Hi Varun,
    are u using the same UDF that I replied. also note that the variable key should be declared only once.
    Use this without changing any thing. It works for me...
    DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
    DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
    String ourSourceFileName = conf.get(key);
    key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","Directory");
    String dir =  conf.get(key);
    return dir+'/'+ourSourceFileName;
    Also let us know where do you het this error..
    Thanks
    SaNv...

  • Source file name

    Hi my mapping is sql loader mapping,
    i want to capture the source file name and make in lower case . owb is 11.2.0.3 .
    please help

    you can pass the file name in as an input paramter so you can dynamically change it when the mapping is invoke, not sure if that is what you want, you have to know the file name first when you are loading orelse it means you hardcode it in the mapping config.

  • Condition based on source file name - PI 7.1

    Hi Friends
    I have an file2file interface without any mapping requirement , source is sending  .csv files and I need to post those source files to two target systems in which each target system have two directories where I need to post based on few conditions and here are my queries.
    1. As mapping is not required I guess File Content Conversion is also not required as I simply pick and drop the .csv files into target - please confirm.
    2. One of the condition is :  source file name will be XXXX-AABB-C-XXXX-XXX-XXX.csv , here SAP PI has to read the company code (AABB) to determine the target system. Z001 and Z007 should be sent to TARGET1 & All other files will be sent to Target2.
    3. 2nd Condition : SAP PI has to read the type of file indicator (C). The files will be sent to the following target application directories:
    Simulation files (indicator = S): /interfaces/XXX/simulation
    Production files (indicator = P): /interfaces/XXX/inbound/
    Please kindly provide your ideas/solutions .
    Regards
    Suman.

    Hi Suman,
    If the Target is two different locations, then i guess you need to have two receiver Channels. Please check the below thread for details:
    Re: Genrate file in 2 different locations
    Incase of different directories in same server, you can check out this link:
    Dyanamic Configuration at receiver file adapter determine target directory
    kanan

  • Abount java source file name

    Friends,
    I am new in java... Kindly clarify my doubt...
    when i create public class i have to give the class name as my file name. but if i create a default class
    like
    class SimpleClass
    i need not give the exact class name as file name.
    why?
    sorry for my english...

    Java source code files may contain one and only one top-level (that is, non-nested) public class declaration. The name of the public class must match the source file name.
    The java language specification details this here:
    http://java.sun.com/docs/books/jls/third_edition/html/packages.html#26783
    Obviously if you were permitted more than one top-level class per compilation unit then I suspect you would into problems with access privileges.

  • Imported source file name changed for the external table

    Hi,
    I have external table from flat file. Now the source file name is changed. I can change the file location to point to the new file name, but I can't update the source for the flat file property(as seen under flat file properties,structure tab. the column "Sampled From"). Is there way to have this update without having to import the file using the new file name again?

    In the Files section in the object navigator find the flat file you want to change the source of.
    Double click on the actual file, and on the General tab change the old file name to the new one.
    The fact that it has been sampled from a different file should not 'disturb' the working of the external table.
    However, if the structure of the new file is different I'd suggest to resample.
    Good luck, Patrick

  • Load all file names in a directory to a SQL Table

    I need to load all the file names in a directory to a SQL table. It must be done via TSQL or SSIS. If using TSQL cannot use xp_cmdshell or any undocumented sprocs. So I am guessing it will be SSIS. But still open to suggestions. I am an SSIS newbie and need
    a nudge in the right direction of how to get the file names into a SQL table.
    Thanks

    Let me add a bit of background. We are sent a group of files. Each file has the ccyymmdd date attached to the name. Possible that we miss processing one day and the next day there are two sets of files in the directory. file1_20140101, file2_20140101,
    file1_20140102, file2_20140102. I cannot guarantee what the file names will be. Just know that i need to process the 20140101 files in one batch, and then the 20140102 files in the next batch. So thinking that i could read all the file names into a SQL table,
    distinct on the date and then sort by the date and pull off those files to process first. Thinking this will be done in SSIS. Open to any ideas or suggestions.

  • Linux file name into ODI variable

    Hello All,
    I have a situation where we have files in one directory in linux ,I want to import the file name into a ODI variable.
    Ex : A_B_C_2014_01_20.zip (inside this zip file are the flat files with data) is the file name in /u02/source_files location , i want this into a ODI variable and once the data loading is complete ,i want to log it saying
    A_B_C_2014_01_20.zip complete
    A_B_C_2014_01_21.zip complete.
    So my other shell script will look for the complete flag and copy the next file into the ODI pick up location.In this case I need to pick up A_B_C_2014_01_22.zip and start the data loading.
    How do i implement this functionality in ODI. Please let me know.

    Issue was due to a syntax error. Case closed.
    Thanks!
    -OS

  • Get the file name into a Odi variable

    Hi,
    I need to get the file name into odi variable like ..A/ETC/file.txt
    For eg.the filename file.txt should get store in a variable.
    Then i want to compare the file name stored in the variable with some other value.
    Please suggest.
    Thanks.

    in package,
    declare the variable, then evaluate it with another variable, generally using # syntax
    if the variable is date type, suggest to use : syntax, because # will treat the variable value as text value
    in loadplan
    use case when syntax,

  • Dynamic File Name depending on the Source File name

    Hi Experts,
    I have a problem like Dynamic File name depending on the Source File Name. I will explain with example as follwos
    Source File name                 Targer Folder/Filename
    NK01.VR59.L2007030         VR59/Rec.l200
    NK01.VR71.L2017030         VR71/Rec.l201
    NK01.VR77.L2027030         VR77/Rec.l202
    See above the exaple, Depending on the Source file name, I am deciding where i need to place my file and what name i need to name it.
    So please suggest me the solution and How can i do this with a single communication channel ? Do i need to create multiple CC for each folder??
    Points will be rewarded for Valuable anwer.
    Thanks in Advance,
    Best Regads,
    Vijay

    Hi VIjay,
    Thanks for quick reply. But i am getting error in End to End Scenarios only. If i remove the Return " "  statement from the UDF, while activating it is showing the error saying like missing return statement. I also mapped to the top most node to this UDF.
    I am getting the following error in End to End error Scenarios:
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Request Message Mapping
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>Application</SAP:Category>
      <SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
      <SAP:P1>com/sap/xi/tf/_MM_Target_File_determined_</SAP:P1>
      <SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException</SAP:P2>
      <SAP:P3>Fatal Error: com.sap.engine.lib.xml.parser.Parser~</SAP:P3>
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>During the application mapping com/sap/xi/tf/_MM_Target_File_determined_ a com.sap.aii.utilxi.misc.api.BaseRuntimeException was thrown: Fatal Error: com.sap.engine.lib.xml.parser.Parser~</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>

  • RH10 variable and build tag source file names

    I'm using RH10 and outputting to WebHelp. My company requires that I archive project source files to our CVS via Eclipse. I am not using RoboSource_Control and must use the company's development resources for archiving.
    Since archiving the initial project, I have been uploading only source files with modified dates.
    However, I have discovered that the files I thought were storing user variables and build tags are not the correct files to archive. Since I am uploading all files with a newer date and that's not working, I need to know the user variable source file name and the build tag source file name that stores the currently defined variables and build tags.
    I have already tried the WebHelp forum and was directed to this forum to pose the question because I'm looking for source file information instead of output file information.
    Thanks for your help!
    karen

    Yes, Eclipse does work that way. However, we do not use our development directory as the local Eclipse repository. I need to move changed files to the local repository (stores all source files in the project) so that Eclipse can upload changes to the server. Yes, this is planned redundancy.
    That said, it is not acceptable to spend the time copying all files in the large projects from the work folder to the local repository. I simply need to know which individual files to copy that include the currently defined variables and build tags. Note, we do not copy the SSL folder output files to our local source file repository, or other associated reference files that are not actually project source files.
    Can you find someone who knows which files I need?
    Thanks,
    karen

  • File Sender adapter - source file name - weird

    Hi all,
    We have a sender file adapter polling an ftp location. The Dynamic config has been enabled to get the source file name.
    The actual file name is - "hrmd.xml", but in the dynamic configuration node, in sxmb_moni, the fileName is shown as ./hrmd.xml.
    This does not occur with any other file sender adapter comm channels polling ftp locations.
    I guess this has something to do with the ftp server. Did anyone face this issue?

    the fileName is shown as ./hrmd.xml
    The file name surely cant have a / in it....such characters are not allowed.
    is there any way we can change the fileName message attribute once the file is picked up
    Create a UDF for Dynamic Configuration and change the name as per your requirement (in XI)....the source file may be having proper format for name and i assume that you have to change it for receiver file name

Maybe you are looking for