Load Testing for IMS 5.2
hi,
is therer any tools available for load testing for ims 5.2? Can mailstone be used? Understand that this is used in NMS 4.x
thxz
cheerz
marxz
There is no offically supported load testing tools that I am aware of. You are correct that mailstone was shipped with NMS. I have used mailstone, once, but could not figure out what the thing was trying to do. I think it is badly written and the documentation is extremely lacking, IMHO.
Being that iMS follows Internet standards you can use any testing tools that also follow those Internet standards. I've not researched to know if load testing tools exist for mail servers or not, certainly someone has done it.
Similar Messages
-
Do load test for application installed in Weblogic 10.3.4 using OATS 9.31
Hi Friends,
I need to do a load test for my application deployed in Weblogic 10.3.4. I went on to use the Oracle Application testing Suite (OATS 9.31). But it says its compatible only upto Weblogic 10.3.3. So pls advice me to find a way to load test my oracle fusion application deployed in the current server.
Thanks and regards,
VijaiHi,
Maybe worth also trying the WLS forum for what folks over there use: WebLogic Server - General
Frank -
Performance and Load testing for Agentry applications in SMP2.3
Hello Experts,
We have a requirement to carry out the Performance and Load testing for our SAP Work Manager application (SMP2.3).
Please guide me if ATE (Agentry Test environment) / Jmeter / or any other testing tool can be utilized for the same.
Would be great if you could provide me the steps / references for the same.
Thanks,
AbhishekHi Abhishek,
Please refer this document Agentry - Assets for Admins & Architects. It has very good content which explains about performance testing and performance tuning.
Rgrds,
Jitendra -
How can I do the load test for EBS 11i
Dear Suport
I start to try OATS.
I have used a Openscript to record the functional test and it works fine for EBS 11i.
However, I cannot directly use the script from Functional Test. Is there have any ways to convert the Functional Testing script to Load Testing script?
Since the fail of using functional script, I create a new Load Testing script in Openscript and record what I do in functional test. However, I got the below error when I record the script.
!ENTRY oracle.oats.scripting.modules.http.proxyRecorder.ProxyRecorderQueueRunnable 2 0 2010-01-06 11:42:07.354
!MESSAGE Could not determine request character set for http://localhost:8088/olt/ConnectToServer.do, referer=http://localhost:8088/olt/BuildScenario.do
!ENTRY oracle.oats.scripting.modules.browser.api.javaHelper.Installer 4 0 2010-01-06 11:42:58.678
!MESSAGE formsRecorder.jar does not exist in C:\Program Files\Java\jre6\lib\ext
I have tried to copy the file, formsRecorder.jar, from C:\OracleATS\OpenScript\openscript_configuration\org.eclipse.osgi\bundles\56\1\.cp\lib to C:\Program Files\Java\jre6\lib\ext
However, the file, formsRecorder.jar, will be deleted when record the test by openscript. (Antivirus too is disabled during record the script).
Do you have any idea for record the Load Testing script by Openscript?
Regards
Sidney WongTry the trial version of HTML Optimizer - it will optimize 50% of your files and may convince you that optimizing is your best chance to get your site to load in IE unless you want to drastically reduce your page file sizes.
-
Require Help on Load Testing for Oracle Applications
Hi,
I have to do a Load Testing on Oracle Application 11i. I am not able to understand from where do I need to start.
Could any one please help on this ?
Ramu.The tool which I am using for this is "Oracle Application Testing Suite".
Any help welcome !
Ramu -
ATS load testing for E-Business Suite using IE8 issue
Hi,
I am trying to record a load testing script using Oracle Application testing SUite for E-Business Suite R12.1.3 application. When I start recording I get a pop up asking me to change/disable XSS filter in IE8. I have altready done that and restarted the browser. But the same pop up message comes up.
My queries are:
1) Is ATS 9.3 supported for use with Internet Explorer 8? I am using Windows 7
2) How can I overcome this issue so that I can records EBS script in openscript.
I have run the runDiagnosis.bat file under openscript install folder and the output is as follows:
10:40:17,892 INFO [Application] Log files stored in: C:\OracleATS\logs\odt
10:40:17,905 INFO [DiagnosisExecutor] Starting diagnosis...
10:40:17,908 INFO [DiagnosisExecutor] Log files for all diagnosis categories are stored in: "C:\OracleATS\logs\odt"
10:40:18,105 INFO [DiagnosisExecutor] Environment Info - Date Tue Oct 11 10:40:17 BST 2011
Windows Vista 6.1 , x86
OpenScript
Internet Explorer 8.0.7600.16385
FireFox 7.0.1
10:40:18,108 INFO [DiagnosisExecutor] Openscript install directory: C:\OracleATS\openScript
10:40:18,117 DEBUG [DiagnosisExecutor] Diagnosing Oracle EBS/Forms Functional Testing - Forms FT Diagnoser
10:40:18,532 ERROR [Forms FT Diagnoser] JInitiator was not found on the system.
10:40:18,537 INFO [Installer] JRE option cache is available: false
10:40:18,541 ERROR [Installer] Failed to backup JRE options! FormsFT helper installation will continue...
java.io.FileNotFoundException: C:\Users\Rian\AppData\Roaming\Sun\Java\Deployment\deployment.properties (The system cannot find the path specified)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:106)
at oracle.oats.scripting.modules.forms.common.utility.FileUtility.copyFile(FileUtility.java:26)
at oracle.oats.scripting.modules.forms.common.helperInstaller.Installer.installJREPatchImpl(Installer.java:119)
at oracle.oats.scripting.modules.forms.common.helperInstaller.Installer.installJREPatch(Installer.java:105)
at oracle.oats.scripting.modules.forms.common.helperInstaller.WindowsInstaller.installJREPatch(WindowsInstaller.java:68)
at oracle.oats.scripting.modules.forms.common.helperInstaller.Installer.doInstall(Installer.java:75)
at oracle.oats.scripting.modules.formsFT.common.api.internal.helperInstaller.InstallerManager.doInstall(InstallerManager.java:130)
at oracle.oats.scripting.modules.formsFT.diagnosis.FormsFTDiagnoser.checkFormFTHelperInstallation(FormsFTDiagnoser.java:141)
at oracle.oats.scripting.modules.formsFT.diagnosis.FormsFTDiagnoser.diagnose(FormsFTDiagnoser.java:50)
at oracle.oats.scripting.diagnosisTool.api.DiagnosisExecutor.diagnose(DiagnosisExecutor.java:146)
at oracle.oats.scripting.diagnosisTool.api.DiagnosisExecutor.diagnose(DiagnosisExecutor.java:90)
at oracle.oats.scripting.diagnosisTool.Application.runSilently(Application.java:191)
at oracle.oats.scripting.diagnosisTool.Application.run(Application.java:90)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.eclipse.equinox.internal.app.EclipseAppContainer.callMethodWithException(EclipseAppContainer.java:574)
at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:195)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:386)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:549)
at org.eclipse.equinox.launcher.Main.basicRun(Main.java:504)
at org.eclipse.equinox.launcher.Main.run(Main.java:1236)
at org.eclipse.equinox.launcher.Main.main(Main.java:1212)
at org.eclipse.core.launcher.Main.main(Main.java:30)
10:40:22,867 WARN [Installer] FormsFT Helper is installed without cache
java.io.FileNotFoundException: C:\Users\Rian\AppData\Roaming\Sun\Java\Deployment\deployment.properties (The system cannot find the path specified)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:106)
at oracle.oats.scripting.modules.forms.common.utility.FileUtility.copyFile(FileUtility.java:26)
at oracle.oats.scripting.modules.forms.common.helperInstaller.Installer.installJREPatchImpl(Installer.java:193)
at oracle.oats.scripting.modules.forms.common.helperInstaller.Installer.installJREPatch(Installer.java:105)
at oracle.oats.scripting.modules.forms.common.helperInstaller.WindowsInstaller.installJREPatch(WindowsInstaller.java:68)
at oracle.oats.scripting.modules.forms.common.helperInstaller.Installer.doInstall(Installer.java:75)
at oracle.oats.scripting.modules.formsFT.common.api.internal.helperInstaller.InstallerManager.doInstall(InstallerManager.java:130)
at oracle.oats.scripting.modules.formsFT.diagnosis.FormsFTDiagnoser.checkFormFTHelperInstallation(FormsFTDiagnoser.java:141)
at oracle.oats.scripting.modules.formsFT.diagnosis.FormsFTDiagnoser.diagnose(FormsFTDiagnoser.java:50)
at oracle.oats.scripting.diagnosisTool.api.DiagnosisExecutor.diagnose(DiagnosisExecutor.java:146)
at oracle.oats.scripting.diagnosisTool.api.DiagnosisExecutor.diagnose(DiagnosisExecutor.java:90)
at oracle.oats.scripting.diagnosisTool.Application.runSilently(Application.java:191)
at oracle.oats.scripting.diagnosisTool.Application.run(Application.java:90)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.eclipse.equinox.internal.app.EclipseAppContainer.callMethodWithException(EclipseAppContainer.java:574)
at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:195)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:386)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:549)
at org.eclipse.equinox.launcher.Main.basicRun(Main.java:504)
at org.eclipse.equinox.launcher.Main.run(Main.java:1236)
at org.eclipse.equinox.launcher.Main.main(Main.java:1212)
at org.eclipse.core.launcher.Main.main(Main.java:30)
10:40:22,936 INFO [Installer] JRE option cache is available: false
10:40:24,044 DEBUG [DiagnosisExecutor] Diagnosed Oracle EBS/Forms Functional Testing - Forms FT Diagnoser. Analyzing results.
10:40:24,063 DEBUG [DiagnosisExecutor] Diagnosing Sun JRE Version 1.6.0_24
10:40:24,077 DEBUG [DiagnosisExecutor] Diagnosing Forms FT Helper Installation
10:40:24,080 DEBUG [DiagnosisExecutor] Diagnosing Web Functional Testing - IE Helper
10:40:24,238 INFO [IEBhoUtil] DotNet Framework found. Version is 4.0.30319
10:40:24,404 INFO [RunCommand] [Cmd execute] cmd.exe /C C:\Windows\Microsoft.NET\Framework\v4.0.30319\regasm.exe
10:40:26,187 INFO [IEBhoUtil] DotNet Framework works well.
10:40:26,318 INFO [IEBhoUtil] OpenScript IE Toolbar/BHO is found.
10:40:26,458 INFO [RunCommand] [Cmd execute] cmd.exe /C "C:\OracleATS\openScript\Oracle IE ToolBar\OpenScriptToolBar.exe"
10:40:27,357 ERROR [IEBhoUtil] Run Oracle IE Toolbar error:Attempted to perform an unauthorized operation.
10:40:27,594 INFO [IEBhoUtil] IE Enhanced Security Administrator Setting: null
10:40:27,675 INFO [IEBhoUtil] IE Enhanced Security Users Setting: null
10:40:27,677 INFO [IEBhoUtil] IE Enhanced Security Settings Disabled
10:40:27,681 DEBUG [DiagnosisExecutor] Diagnosed Web Functional Testing - IE Helper. Analyzing results.
10:40:27,683 DEBUG [DiagnosisExecutor] Diagnosing .NET Framework
10:40:27,685 DEBUG [DiagnosisExecutor] Diagnosing IE Helper Installation
10:40:27,686 DEBUG [DiagnosisExecutor] Diagnosing IE Helper Accessibility
10:40:27,687 ERROR [DiagnosisExecutor] Failure found when diagnosing Web Functional Testing IE Helper
10:40:27,689 DEBUG [DiagnosisExecutor] Trying to fix IE Helper Accessibility
10:40:27,691 INFO [IE Helper] Try to fix an issue: IE Helper Accessibility
10:40:27,860 INFO [IEBhoUtil] OpenScript IE BHO/Toolbar has been enabled.
10:40:27,864 INFO [DiagnosisExecutor] Auto-fixed IE Helper Accessibility
10:40:27,866 DEBUG [DiagnosisExecutor] Diagnosing IE Helper Conflict
10:40:27,869 DEBUG [DiagnosisExecutor] Diagnosing IE Zoom Factor
10:40:27,871 DEBUG [DiagnosisExecutor] Diagnosing IE Enhanced Security Setting
10:40:27,982 DEBUG [DiagnosisExecutor] Diagnosing Web Functional Testing - Firefox Helper
10:40:28,076 INFO [FFExtUtil] OpenScript WebDom Firefox extension is already installed.
10:40:28,156 INFO [FFExtUtil] OpenScript WebDom Add-on is compatible with the installed Firefox 7.0.1
10:40:28,174 INFO [FFExtUtil] Firefox profiles are found.
10:40:28,179 INFO [FFExtUtil] Firefox profiles are found.
10:40:28,182 DEBUG [DiagnosisExecutor] Diagnosed Web Functional Testing - Firefox Helper. Analyzing results.
10:40:28,191 DEBUG [DiagnosisExecutor] Diagnosing Firefox Helper Installation
10:40:28,193 DEBUG [DiagnosisExecutor] Diagnosing Firefox Version
10:40:28,199 DEBUG [DiagnosisExecutor] Diagnosing Firefox Helper Accessibility
10:40:28,201 DEBUG [DiagnosisExecutor] Diagnosing Reset Firefox content preferences.
10:40:28,207 DEBUG [DiagnosisExecutor] Diagnosing Operating System - WebDom Platform Diagnosor
10:40:30,798 DEBUG [DiagnosisExecutor] Diagnosed Operating System - WebDom Platform Diagnosor. Analyzing results.
10:40:30,801 DEBUG [DiagnosisExecutor] Diagnosing Environment Variables
10:40:30,803 DEBUG [DiagnosisExecutor] Diagnosing IE Toolbar/BHO Remover
10:40:30,806 DEBUG [DiagnosisExecutor] Diagnosing Oracle EBS/Forms Load Testing - Forms LT Diagnoser
10:40:31,647 DEBUG [Forms LT Diagnoser] Proxy settings for Sun Java 1.5 and higher are set correctly to "Use Browser Settings". Proxy settings for older versions of Sun Java and JInitiator should be manually verified.
10:40:31,650 DEBUG [DiagnosisExecutor] Diagnosed Oracle EBS/Forms Load Testing - Forms LT Diagnoser. Analyzing results.
10:40:31,654 DEBUG [DiagnosisExecutor] Diagnosing IE8 XSS Security Settings
10:40:31,655 ERROR [DiagnosisExecutor] Failure found when diagnosing Oracle EBS/Forms Load Testing Forms LT Diagnoser
10:40:31,659 DEBUG [DiagnosisExecutor] Trying to fix IE8 XSS Security Settings
10:40:31,671 ERROR [DiagnosisExecutor] Did not auto-fix the problem.
10:40:31,674 ERROR [DiagnosisExecutor] Suggestion for fixing: Local intranet: XSS Filter is disabled
Trusted sites: XSS Filter is enabled
Internet: XSS Filter is disabled
Restricted sites: XSS Filter is enabled
To Change setting:
Go to Tools > Internet Options and Choose Security Tab
Select the Zone to modify and Press Custom level
Find Enable XSS filter Setting - Select Disable and click Ok
10:40:31,680 DEBUG [DiagnosisExecutor] Diagnosing Sun Java proxy settings
10:40:31,683 DEBUG [DiagnosisExecutor] Diagnosing Helper Service - Helper Service
10:40:32,282 DEBUG [DiagnosisExecutor] Diagnosed Helper Service - Helper Service. Analyzing results.
10:40:32,284 DEBUG [DiagnosisExecutor] Diagnosing Helper Service Installation
10:40:32,287 DEBUG [DiagnosisExecutor] Diagnosing Helper Service Status
10:40:32,289 DEBUG [DiagnosisExecutor] Diagnosing Helper Service Connection
10:40:32,612 DEBUG [DiagnosisExecutor] No Eclipse configuration .log file available.
10:40:32,774 INFO [DiagnosisExecutor] Diagnosis Complete.
Please advise.
regards
CPHello
1/ ATS 9.3 is supported with IE8, not IE9 at the moment
2/ Did you disable xss settings for the four different security zones?
You can also try to add the EBS url to the trusted sites and disable xss settings for that zone only.
Let us know and good luck
JB -
Load Tests for (Desgin issue, Servlets with EJBs in real life?)
I have a very light java program that makes an HTTP connection to a servlet
on the WLS,
it uses the GET method for that, and reads the response from the server, it
logs the time that passes from just before opening the HTTP connection and
right after finishing reading the response. Below is the code snippet for
that:
url = new URL(sURL);
start = getCurrentTime();
URLConnection conn = url.openConnection();
conn.connect();
readResponse(conn.getInputStream());
end = getCurrentTime();
There is a second piece that controls the HTTP connections, it is a separate
java program that creates
the HTTP connection process as many times as desired in a loop and waits for
a specific period of time between every fork of the process (values I used
are 0ms, 3 ms, 30ms etc), you can think of this as arrival rate for the
requests to the server. Below is the code snippet that does this :
for(int i=0; i<nNumOfHits; i++) {
Runtime.getRuntime().exec(HTTP_conn_command);
Thread.sleep(nInterval);
I used WLS 5.1, on a pentium III 866 Mhz., Windows 2000 Pro, with 512 Mb
Ram,
tests are done locally, (WLS and the client programs run on the same
machine),
after each test I refresh the server to be accurate.
With the Servlet + Java approach what the servlet does is to instantiate a
Java Object and
call an Init method on the object passing the HttpServletRequest to it, and
call the
corresponding setters, that's it. There are 7 paramaters which are all
strings, so 7 setters are called.
The Servlet + EJB approach does the same thing, but encapsulates the above
implementation in a single business method of a stateless session bean. Home
interface is created in Init() method of the servlet,
so it is used over and over again.
Any comments on this, greatly appreciated,
thanks,
ali.I have a very light java program that makes an HTTP connection to a servlet
on the WLS,
it uses the GET method for that, and reads the response from the server, it
logs the time that passes from just before opening the HTTP connection and
right after finishing reading the response. Below is the code snippet for
that:
url = new URL(sURL);
start = getCurrentTime();
URLConnection conn = url.openConnection();
conn.connect();
readResponse(conn.getInputStream());
end = getCurrentTime();
There is a second piece that controls the HTTP connections, it is a separate
java program that creates
the HTTP connection process as many times as desired in a loop and waits for
a specific period of time between every fork of the process (values I used
are 0ms, 3 ms, 30ms etc), you can think of this as arrival rate for the
requests to the server. Below is the code snippet that does this :
for(int i=0; i<nNumOfHits; i++) {
Runtime.getRuntime().exec(HTTP_conn_command);
Thread.sleep(nInterval);
I used WLS 5.1, on a pentium III 866 Mhz., Windows 2000 Pro, with 512 Mb
Ram,
tests are done locally, (WLS and the client programs run on the same
machine),
after each test I refresh the server to be accurate.
With the Servlet + Java approach what the servlet does is to instantiate a
Java Object and
call an Init method on the object passing the HttpServletRequest to it, and
call the
corresponding setters, that's it. There are 7 paramaters which are all
strings, so 7 setters are called.
The Servlet + EJB approach does the same thing, but encapsulates the above
implementation in a single business method of a stateless session bean. Home
interface is created in Init() method of the servlet,
so it is used over and over again.
Any comments on this, greatly appreciated,
thanks,
ali. -
How to set Proxy for IE 8.0 on doing Load Testing with OATS 12.1.0.2
I have tried adding proxy server by adding the address to "Localhost" and Port as 8080.
but nothing is working out, for recording an EBS instance its working fine ,no need to setup anything in the OATS tool, eg, Proxy settings.
But when it comes to BPM with ADF technology , the recorder is not starting the Recording even the pointer navigation also not wokring.
So, is there way to record the ADF applications in BPM ?
Thanks in advance.Hi Wayne,
Thing is do we need to add the proxy server here?, as for doing Load testing on EBS application,there is no need of adding a proxy server,
So the same way it should work with the ADF application too, but its not showing any mouse pointer in the Browser tool bar or recording
the navigation.
Point to be noted is, we need to connect to VPN in order to access the Application.
is it because of VPN connection that its not recording?
But while doing the functional testing I didn't face anyproblem though as its recording everything even if we are connected to VPN.
In Functional testing also i found ,all the input fields where we add the "username" or any input data via a "text box" the tool is not able to
record the field information along with the input we enter.
If you could let me know ,how to do a Load testing for ADF application using BPM , it would be helpful
Thanks
Atish -
Which tool do you use for load testing?
Which tool do you use for load testing for J2EE application?
hi,
i use jmeter for without issues..
first make sure that the system from where you are doing load testing is in the same lan(without firewall) to that of server. Here you are testing the capacity of server and not the network bandwith.
So assuming very good network connection what is the servers performance level...
If u have to decide which tool is decent enough to load testing,
i would suggest go for jmeter. its reliable and i have used it without problems.
Here is my quick tutorial for jemeter which i made for my teams reference.
REFERENCE
For Getting Started refer to any tutorial for Jmeter
You can refer to introduction on
http://jakarta.apache.org/jmeter/usermanual/
RUNNING LOAD TEST
Extract jakarta-jmeter-2.3RC4.zip in c:
install jdk-1_5_0_12-windows-i586-p.exe
Run C:\jakarta-jmeter-2.3RC4\bin\jmeter.bat
In Test Plan add Thread Group
Right Click Thread Group -> Add->Sampler->HTTP Request
Select HTTP Request added fill details
Serverip:www.xyz.com
Port:80
Path:/xyz-webapp/index.jsp
Use KeepAlive: Checked
Retrive All Embeded images from HTML: Checked(For geting images inside html)
Right Click Thread Group -> Add->Listner->Graph Results
Click on Thread Group Fill details
No of Threads:3(This means no of simultaneous users)
Ramp Up Period:1(3 Request will be made in 1 second period)
Loop Count:5(Above process should be repeated how many times)
Save TestPlan
Run -> Clear All
Run -> Start
Click on Graph Results for Output
Try adding different listener in Thread Group
Thread Group -> Add->Listner->Summary Report
Listeners coud be added at thread group level or HTTP Request Level
RECORDING A TEST.
Add a HTTP proxy server in workbench by right clicking on it and selecting Add->Non test Element->HTTP Proxy Server.
In Test Plan Add Thread Group
In HTTP proxy server select Target Controller as Test Plan > Thread Group.
Go to Internet Explorer and go to internet settings and set proxy server as localhost and the port
which is configured in Jmeter proxy server.Save Settings.
In Jeter proxy server start by Clicking on Start button in the HTTP Proxy Server Flap.
In browser navigate the application which you want to test.
The nodes will be added in the Thread Group.
Once Navigation is done stop the proxy server and save the test plan from file menu.
LOGGING INTO APPLICATION.
When we have to login into system and then navigate the system
we need a cookie to be tracked after login. This could be achieved
simply by Add -> Config Element -> HTTP Cooie Manager.
After adding the HTTP Cooie Manager simply run the test.
LOOPING COUNTER.
When a request is made multiple parameter is sent to server.
Parameters are sent from the HTTP Request node added in the Thread Group
in "Send Parameter with the request" table.
If we run the loop count 10 times the parameters will be sent same in every request.
If you have to send parameters like user1,user2,user3,user4....
then add -> Pre processor -> Counter.
Put start as 1 and and Maximum as 10 or whatever required.
Put Referene name as iCtr or whatever.
In the "Send Parameter with the request" in value column put user${iCtr} -
Best load test software for RTMP application
Hi everyone,
I'd like to run some load tests for my application (AIR 3.4, Flex 4.6). I'm using flex messaging protocol RTMP and I was wondering which software could easily (or not) simulate my Producer job and how.
Any feedback would be greatly appreciated.
Regards,
FabienHi Fabien,
Have you heard about NeoLoad from Neotys?
It is a load testing tool for Web applications. It is very focused on all RIA’s included Flex and RTMP.
I’m working for the company, and you could think that my opinion is biased here.
I then invite you to have a try yourself and download the trial version at www.neotys.com.
It includes all RTMP and Flex capabilities. You’ll see how NeoLoad makes easy the handling of that protocol.
Our website gives explanation on RTMP load testing, that might be helpful too.
The last but not the least, we’re Adobe partner. Our tool has been designed accordingly to all RTMP requirements. You can go ahead with confidence.
Regards,
Olivier Hanoun. -
Remove test run from Load Test Manager in Visual Studio Online Load Testing
I have been using the Visual Studio Online Azure load testing for a while now, and I have a number of test runs that I would like to remove. I am not referring to my local Load Test Results Store (on-premise SQL DB), as I can remove test runs no problem.
I mean, how to remove them from "the cloud" so we can no longer re-download the test results.Hi David,
As far as I know, it's not supported for Visual Studio Online to run load tests for solutions hosted on GitHub. You can submit a user voice
here.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
EBS concurrent users -- load testing
Hi,
As part of performance/load testing for 100 concurrent users, we are not able to load over 99 users. I have set the nprocs=4 (8 cpus) and JVM max=1024.
I am not what limits I hitting to handle over 100 concurrent users.
ENV: R12 on RH 5, single node/2-tier combination, 11.2.0.2
Appreciate any help or suggestions.
FYI: I have already reviewed and followed steps from note# 362851.1As part of performance/load testing for 100 concurrent users, we are not able to load over 99 users. I have set the nprocs=4 (8 cpus) and JVM max=1024.Do you get any errors? Please check Apache/JVM logs for details.
FYI: I have already reviewed and followed steps from note# 362851.1What is your current JVM configuration?
Thanks,
Hussein -
When i run load test on oracle RDF i get the following modelname_RI busy
Hi
Issue:
When running load test for 250 VU on oracle RDF getting the following error:
modelname_RI table busy
This happens for all methods that use inferencing.
Inferencing used in the application is:
graph.performInference();
Kindly suggest wts the remedy for the issuedatabase:Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - 64bit Production
Jena:2.0
Stack trace:
SEVERE: rethrew: oracle.spatial.rdf.client.jena.InvalidStatusException: executeBindings: ORA-20000: We do not have a valid rules index for this Model-Rulebase combination
ORA-06512: at "MDSYS.RDF_MATCH_IMPL_T", line 695
ORA-06512: at "MDSYS.RDF_MATCH_IMPL_T", line 222
ORA-06512: at line 1
oracle.spatial.rdf.client.jena.InvalidStatusException: executeBindings: ORA-20000: We do not have a valid rules index for this Model-Rulebase combination
ORA-06512: at "MDSYS.RDF_MATCH_IMPL_T", line 695
ORA-06512: at "MDSYS.RDF_MATCH_IMPL_T", line 222
ORA-06512: at line 1
at oracle.spatial.rdf.client.jena.OracleSemQueryPlan.executeBindings(OracleSemQueryPlan.java:329)
at com.hp.hpl.jena.sparql.engine.iterator.QueryIterBlockTriplesQH$StagePattern.<init>(QueryIterBlockTriplesQH.java:89)
at com.hp.hpl.jena.sparql.engine.iterator.QueryIterBlockTriplesQH.nextStage(QueryIterBlockTriplesQH.java:55)
at com.hp.hpl.jena.sparql.engine.iterator.QueryIterRepeatApply.makeNextStage(QueryIterRepeatApply.java:92)
at com.hp.hpl.jena.sparql.engine.iterator.QueryIterRepeatApply.hasNextBinding(QueryIterRepeatApply.java:54)
at com.hp.hpl.jena.sparql.engine.iterator.QueryIteratorBase.hasNext(QueryIteratorBase.java:69)
at com.hp.hpl.jena.sparql.engine.iterator.QueryIterSort.sort(QueryIterSort.java:47)
at com.hp.hpl.jena.sparql.engine.iterator.QueryIterSort.<init>(QueryIterSort.java:39)
at com.hp.hpl.jena.sparql.engine.iterator.QueryIterSort.<init>(QueryIterSort.java:34)
at com.hp.hpl.jena.sparql.engine.main.OpCompiler.compile(OpCompiler.java:355)
at com.hp.hpl.jena.sparql.engine.main.CompilerDispatch.visit(CompilerDispatch.java:163)
at com.hp.hpl.jena.sparql.algebra.op.OpOrder.visit(OpOrder.java:28)
at com.hp.hpl.jena.sparql.engine.main.CompilerDispatch.compile(CompilerDispatch.java:33)
at com.hp.hpl.jena.sparql.engine.main.OpCompiler.compileOp(OpCompiler.java:94)
at com.hp.hpl.jena.sparql.engine.main.OpCompiler.compile(OpCompiler.java:361)
at com.hp.hpl.jena.sparql.engine.main.CompilerDispatch.visit(CompilerDispatch.java:170)
at com.hp.hpl.jena.sparql.algebra.op.OpProject.visit(OpProject.java:38)
at com.hp.hpl.jena.sparql.engine.main.CompilerDispatch.compile(CompilerDispatch.java:33)
at com.hp.hpl.jena.sparql.engine.main.OpCompiler.compileOp(OpCompiler.java:94)
at com.hp.hpl.jena.sparql.engine.main.OpCompiler.compile(OpCompiler.java:72)
at com.hp.hpl.jena.sparql.engine.main.QueryEngineMain.eval(QueryEngineMain.java:44)
at com.hp.hpl.jena.sparql.engine.QueryEngineBase.createPlan(QueryEngineBase.java:86)
at com.hp.hpl.jena.sparql.engine.QueryEngineBase.getPlan(QueryEngineBase.java:75)
at com.hp.hpl.jena.sparql.engine.main.QueryEngineMain$1.create(QueryEngineMain.java:67)
at com.hp.hpl.jena.sparql.engine.QueryExecutionBase.getPlan(QueryExecutionBase.java:282)
at com.hp.hpl.jena.sparql.engine.QueryExecutionBase.startQueryIterator(QueryExecutionBase.java:259)
at com.hp.hpl.jena.sparql.engine.QueryExecutionBase.execResultSet(QueryExecutionBase.java:264)
at com.hp.hpl.jena.sparql.engine.QueryExecutionBase.execSelect(QueryExecutionBase.java:92)
at my.mimos.stp.kbinterface.impl.rdbms.common.UtilCommon.doSparqlSelect(UtilCommon.java:320)
at my.mimos.stp.kbinterface.impl.rdbms.oracle.OracleKBInterfaceDAO.processSPARQLQuery(OracleKBInterfaceDAO.java:1722)
at my.mimos.stp.kbinterface.impl.rdbms.oracle.OracleKBInterfaceDAO.processSPARQLQuery(OracleKBInterfaceDAO.java:1613)
at my.mimos.stp.kbinterface.impl.rdbms.common.RdbmsImpl.processSPARQLQuery(RdbmsImpl.java:245)
at my.mimos.stp.kbinterface.webservice.KBInterfaceService.processSPARQLQuery(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.sun.xml.ws.api.server.InstanceResolver$1.invoke(InstanceResolver.java:246)
at com.sun.xml.ws.server.InvokerTube$2.invoke(InvokerTube.java:146)
at com.sun.xml.ws.server.sei.EndpointMethodHandler.invoke(EndpointMethodHandler.java:257)
at com.sun.xml.ws.server.sei.SEIInvokerTube.processRequest(SEIInvokerTube.java:93)
at com.sun.xml.ws.api.pipe.Fiber.__doRun(Fiber.java:598)
at com.sun.xml.ws.api.pipe.Fiber._doRun(Fiber.java:557)
at com.sun.xml.ws.api.pipe.Fiber.doRun(Fiber.java:542)
at com.sun.xml.ws.api.pipe.Fiber.runSync(Fiber.java:439)
at com.sun.xml.ws.server.WSEndpointImpl$2.process(WSEndpointImpl.java:243)
at com.sun.xml.ws.transport.http.HttpAdapter$HttpToolkit.handle(HttpAdapter.java:470)
at com.sun.xml.ws.transport.http.HttpAdapter.handle(HttpAdapter.java:244)
at com.sun.xml.ws.transport.http.servlet.ServletAdapter.handle(ServletAdapter.java:135)
at com.sun.xml.ws.transport.http.servlet.WSServletDelegate.doGet(WSServletDelegate.java:129)
at com.sun.xml.ws.transport.http.servlet.WSServletDelegate.doPost(WSServletDelegate.java:160)
at com.sun.xml.ws.transport.http.servlet.WSServlet.doPost(WSServlet.java:75)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:637)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:293)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:849)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:583)
at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:454)
at java.lang.Thread.run(Thread.java:619)
com.hp.hpl.jena.shared.JenaException: rethrew: oracle.spatial.rdf.client.jena.InvalidStatusException: executeBindings: ORA-20000: We do not have a valid rules index for this Model-Rulebase combination
ORA-06512: at "MDSYS.RDF_MATCH_IMPL_T", line 695
ORA-06512: at "MDSYS.RDF_MATCH_IMPL_T", line 222
ORA-06512: at line 1
at oracle.spatial.rdf.client.jena.OracleSemQueryPlan.executeBindings(OracleSemQueryPlan.java:352)
at com.hp.hpl.jena.sparql.engine.iterator.QueryIterBlockTriplesQH$StagePattern.<init>(QueryIterBlockTriplesQH.java:89)
at com.hp.hpl.jena.sparql.engine.iterator.QueryIterBlockTriplesQH.nextStage(QueryIterBlockTriplesQH.java:55)
at com.hp.hpl.jena.sparql.engine.iterator.QueryIterRepeatApply.makeNextStage(QueryIterRepeatApply.java:92)
at com.hp.hpl.jena.sparql.engine.iterator.QueryIterRepeatApply.hasNextBinding(QueryIterRepeatApply.java:54)
at com.hp.hpl.jena.sparql.engine.iterator.QueryIteratorBase.hasNext(QueryIteratorBase.java:69)
at com.hp.hpl.jena.sparql.engine.iterator.QueryIterSort.sort(QueryIterSort.java:47)
at com.hp.hpl.jena.sparql.engine.iterator.QueryIterSort.<init>(QueryIterSort.java:39)
at com.hp.hpl.jena.sparql.engine.iterator.QueryIterSort.<init>(QueryIterSort.java:34)
at com.hp.hpl.jena.sparql.engine.main.OpCompiler.compile(OpCompiler.java:355)
at com.hp.hpl.jena.sparql.engine.main.CompilerDispatch.visit(CompilerDispatch.java:163)
at com.hp.hpl.jena.sparql.algebra.op.OpOrder.visit(OpOrder.java:28)
at com.hp.hpl.jena.sparql.engine.main.CompilerDispatch.compile(CompilerDispatch.java:33)
at com.hp.hpl.jena.sparql.engine.main.OpCompiler.compileOp(OpCompiler.java:94)
at com.hp.hpl.jena.sparql.engine.main.OpCompiler.compile(OpCompiler.java:361)
at com.hp.hpl.jena.sparql.engine.main.CompilerDispatch.visit(CompilerDispatch.java:170)
at com.hp.hpl.jena.sparql.algebra.op.OpProject.visit(OpProject.java:38)
at com.hp.hpl.jena.sparql.engine.main.CompilerDispatch.compile(CompilerDispatch.java:33)
at com.hp.hpl.jena.sparql.engine.main.OpCompiler.compileOp(OpCompiler.java:94)
at com.hp.hpl.jena.sparql.engine.main.OpCompiler.compile(OpCompiler.java:72)
at com.hp.hpl.jena.sparql.engine.main.QueryEngineMain.eval(QueryEngineMain.java:44)
at com.hp.hpl.jena.sparql.engine.QueryEngineBase.createPlan(QueryEngineBase.java:86)
at com.hp.hpl.jena.sparql.engine.QueryEngineBase.getPlan(QueryEngineBase.java:75)
at com.hp.hpl.jena.sparql.engine.main.QueryEngineMain$1.create(QueryEngineMain.java:67)
at com.hp.hpl.jena.sparql.engine.QueryExecutionBase.getPlan(QueryExecutionBase.java:282)
at com.hp.hpl.jena.sparql.engine.QueryExecutionBase.startQueryIterator(QueryExecutionBase.java:259)
at com.hp.hpl.jena.sparql.engine.QueryExecutionBase.execResultSet(QueryExecutionBase.java:264)
at com.hp.hpl.jena.sparql.engine.QueryExecutionBase.execSelect(QueryExecutionBase.java:92)
at my.mimos.stp.kbinterface.impl.rdbms.common.UtilCommon.doSparqlSelect(UtilCommon.java:320)
at my.mimos.stp.kbinterface.impl.rdbms.oracle.OracleKBInterfaceDAO.processSPARQLQuery(OracleKBInterfaceDAO.java:1722)
at my.mimos.stp.kbinterface.impl.rdbms.oracle.OracleKBInterfaceDAO.processSPARQLQuery(OracleKBInterfaceDAO.java:1613)
at my.mimos.stp.kbinterface.impl.rdbms.common.RdbmsImpl.processSPARQLQuery(RdbmsImpl.java:245)
at my.mimos.stp.kbinterface.webservice.KBInterfaceService.processSPARQLQuery(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.sun.xml.ws.api.server.InstanceResolver$1.invoke(InstanceResolver.java:246)
at com.sun.xml.ws.server.InvokerTube$2.invoke(InvokerTube.java:146)
at com.sun.xml.ws.server.sei.EndpointMethodHandler.invoke(EndpointMethodHandler.java:257)
at com.sun.xml.ws.server.sei.SEIInvokerTube.processRequest(SEIInvokerTube.java:93)
at com.sun.xml.ws.api.pipe.Fiber.__doRun(Fiber.java:598)
at com.sun.xml.ws.api.pipe.Fiber._doRun(Fiber.java:557)
at com.sun.xml.ws.api.pipe.Fiber.doRun(Fiber.java:542)
at com.sun.xml.ws.api.pipe.Fiber.runSync(Fiber.java:439)
at com.sun.xml.ws.server.WSEndpointImpl$2.process(WSEndpointImpl.java:243)
at com.sun.xml.ws.transport.http.HttpAdapter$HttpToolkit.handle(HttpAdapter.java:470)
at com.sun.xml.ws.transport.http.HttpAdapter.handle(HttpAdapter.java:244)
at com.sun.xml.ws.transport.http.servlet.ServletAdapter.handle(ServletAdapter.java:135)
at com.sun.xml.ws.transport.http.servlet.WSServletDelegate.doGet(WSServletDelegate.java:129)
at com.sun.xml.ws.transport.http.servlet.WSServletDelegate.doPost(WSServletDelegate.java:160)
at com.sun.xml.ws.transport.http.servlet.WSServlet.doPost(WSServlet.java:75)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:637)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:293)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:849)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:583)
at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:454)
at java.lang.Thread.run(Thread.java:619)
Caused by: oracle.spatial.rdf.client.jena.InvalidStatusException: executeBindings: ORA-20000: We do not have a valid rules index for this Model-Rulebase combination
ORA-06512: at "MDSYS.RDF_MATCH_IMPL_T", line 695
ORA-06512: at "MDSYS.RDF_MATCH_IMPL_T", line 222
ORA-06512: at line 1
at oracle.spatial.rdf.client.jena.OracleSemQueryPlan.executeBindings(OracleSemQueryPlan.java:329)
... 65 more -
Abandened Transactions during Load test
Hi Guys,
We are frequently seeing the following trace message in Weblogic console as attached
at the end of mail.
Actually we are conducting a load test for a JMS based applications running on
Weblogic server 6.1 sp4. The test stubs are spawning multiple threads and sending
both synchronous and asynchronous messages. During the course of tests we are
not getting any application specific error. Please let us know as to how we can
track root cause of these abandened transactions.
*****************************Error Trace **********************
<May 7, 2003 11:58:17 AM IST> <Error> <JTA> <Abandoning transaction after 88824
seconds
Xid=10:d9b7d987c4bc34e1(5858042),Status=Committing,numRepliesOwedMe=0,numReplies
OwedOthers=0,seconds since begin=88822,seconds left=0,ServerResourceInfo[weblogi
c.jdbc.jts.Connection]=(state=new,assigned=none),ServerResourceInfo[JMS_HNSJMSJD
BCStore]=(state=new,assigned=none),SCInfo[rdmdomain+rdmServer]=(state=active),SC
Info[jms+jmsServer]=(state=active),properties=({weblogic.jdbc=t3://139.85.249.78
:7011}),OwnerTransactionManager=ServerTM[ServerCoordinatorDescriptor=(Coordinato
rURL=rdmServer+139.85.249.78:7011+rdmdomain+, Resources={})],CoordinatorURL=rdmS
erver+139.85.249.78:7011+rdmdomain+)>
*****************************Error Trace **********************
Thanks in advance,
Kumar Raman
During a two phase commit of a transaction, the coordinator
will try to do the second phase commit operation for each
participant for 24 hours (you can configure this
time period using the "AbandonTimeoutSeconds" attribute of JTAMBean ).
If it fails to complete the commit by then, it logs this message and
abandons
the transaction.
I'm not sure why it can't complete the transaction.
"Kumar Raman" <[email protected]> wrote in message
news:[email protected]...
>
> Hi Guys,
>
> We are frequently seeing the following trace message in Weblogic console
as attached
> at the end of mail.
>
> Actually we are conducting a load test for a JMS based applications
running on
> Weblogic server 6.1 sp4. The test stubs are spawning multiple threads and
sending
> both synchronous and asynchronous messages. During the course of tests we
are
> not getting any application specific error. Please let us know as to how
we can
> track root cause of these abandened transactions.
>
> *****************************Error Trace **********************
>
> <May 7, 2003 11:58:17 AM IST> <Error> <JTA> <Abandoning transaction after
88824
> seconds
>
Xid=10:d9b7d987c4bc34e1(5858042),Status=Committing,numRepliesOwedMe=0,numRep
lies
> OwedOthers=0,seconds since begin=88822,seconds
left=0,ServerResourceInfo[weblogi
>
c.jdbc.jts.Connection]=(state=new,assigned=none),ServerResourceInfo[JMS_HNSJ
MSJD
>
BCStore]=(state=new,assigned=none),SCInfo[rdmdomain+rdmServer]=(state=active
),SC
>
Info[jms+jmsServer]=(state=active),properties=({weblogic.jdbc=t3://139.85.24
9.78
>
:7011}),OwnerTransactionManager=ServerTM[ServerCoordinatorDescriptor=(Coordi
nato
> rURL=rdmServer+139.85.249.78:7011+rdmdomain+,
Resources={})],CoordinatorURL=rdmS
> erver+139.85.249.78:7011+rdmdomain+)>
>
> *****************************Error Trace **********************
>
> Thanks in advance,
> Kumar Raman
>
>
>
-
Oracle Application Suite Load Testing
Hi,
This is regarding Data Bank Settings in OLT. I am trying to a run load test for 50 users. I have a databank of 400 records. But I want the 50 users to run just once and pick any 50 from 400 records in the Data Bank. What are the Databank settings required for this case? Highly appreciate your inputs on this.
Thanks,
ShobanaForgot to mention. My script uses getDatabank("User_Parameters").getNextDatabankRecord(); in initialize() function.
Thanks,
Shobana
Maybe you are looking for
-
Fireworks and Acrobat won't run CS4 & CS5
Long story, short version. I have a brand new iMac, installed CS4 from scratch, and would get the Fireworks error. Tried, uninstall and reinstall many times.. Said oh well, I want CS5 anyhow, so I bought the upgrade to CS5. Used the Adobe Cleaner
-
Finding in camera B&W (monochrome) jpgs
I sometimes use my camera's monochrome or B&W setting. Is there a way to find those images in my library? When I think of it I add a keyword but for those cases where I didn't is there a way to set up a filter to capture those? Thank you.
-
Dual-monitor color management?
So I've got a dual-monitor setup running OS 10.7 on a Mac Pro, and color management in Bridge CS5.1 on my second screen is a mess. Both monitors have been individually calibrated with a Pantone Huey Pro (not perfect, but generally pretty consistent a
-
Bank Details flexfield - Global Legislation
Hi All, I just wanted to get the confirmation of the Bank details flexfield. While we are defining the business group and assigning the legislation according to the legislation the Bank details flexfield will automatically get attached but for global
-
Is there a footpedal that can be used to run movie files using QuickTime?
I'm a musician and need to run some movie clips using a footpedal. Any suggestions?