Load the missing document templates for SOLAR01, 02

Hi,
I would like to use the document templates in SOLMAN (Tcode SOLAR01).
I have detected some of the document templates are not empty, BUT the others (such as Business Blueprint, Scenario documentation).
How can I find and/or activate the non-empty variants of these templates?
Where do the templates store in the DB or OS?
Thank you!
regards

Hi!
Thank you!
I know that
That is even my question. The colleague of my often using SOLMAN said, all the templates should usually be in SOLMAN.
As I mentioned I am missing the most of them (e.g such as Business Blueprint).
Do you know how to get such generated templates or is there the way to upload these from Knowledge Warehouse?
Thank you very much!
regards

Similar Messages

Documents Templates for SOLAR01

Hi!
I would like to use document templates via Tcode SOLAR01, such as Business Blueprint.
Unfortunately some of these templates are blank and do not contain some information (e.g. business blueprint, scenario documentaion)
It is possible to upload the templates in Tcode SOLAR_PROJECT_ADMIN
How can get these templates?
Thank you
regards

Hello Aaron,
If you know the solution to my problem kindly give me the information about it.
I will award you points, if it will solver my problem
Thank you very much
regards

[svn:osmf:] 13000: Adding the missing readme file for the captioning sample app.

Revision: 13000
Revision: 13000
Author:   [email protected]
Date:     2009-12-16 10:36:36 -0800 (Wed, 16 Dec 2009)
Log Message:
Adding the missing readme file for the captioning sample app.
Added Paths:
    osmf/trunk/apps/samples/plugins/CaptioningSample/readme.txt

Carey,
I have tried london1a1's workaround, and it has not made any difference.
It seems that london1a1 suggests changing the Camera.h file in this location:
          Users/london1a1/Documents/DW_NAF/PhoneGapLib/PhoneGapLib/Classes/Camera.h
Whereas you're saying to change the Camera.h file in this location:
          /Applications/Adobe Dreamweaver CS5.5/Configuration/NativeAppFramework/DWPhoneGap/iphone/PhoneGapLib/Classes/Camera.h
I've tried changing the Camera.h file in both locations. Neither has made a difference.

How to create the change document functionality for a dependent objects?

May I please know how to create the change document functionality for a dependent objects?
I have done it follow the same process as for business process objects. But when i try to test it in BOBT, there is no records under "FIELD_CHANGE_WITH_FILTER". It seems the change hasn't been recorded.
If the way I did to create change document for dependent object is correct, please also kindly advise the possibilities for why there is no record during testing.
thanks in advance.

I also have some doubts about the business object.In this case,one abstract BO hase a subnode wihich is root extended.I added the change document for this node under the category "root_extended" and then tested the function in BOBT.I got some error message "can't find the root key".Shall i redefine the method /BOFU/IF_CDO_CREATION~IS_CDO_CREATION_ACTIVE so as to solve the problem?
Thx.

Change the reverse document type for RE.

Hi,
We want to change the reverse document type for document type RE, can any one sugget the possible negative impact.

hi
kindly note that if you are creating a new document type to be assigned as the reversal document type for RE then you need to assign the appropriate number range interval for the year.
if you are going to assign an existing document type as the reversal document type for RE then you will not be able to distingush the past and the new documents generated as both of them shall belong to the same document type.
regards
eashwar
Edited by: eashwar1 on Apr 15, 2010 2:38 PM

Technical document template for WebDynpro application

Dear SDN Community,
Can you please tell me where can I get a Technical Document template for building a WebDynpro(Java) application.
Thanks!
Surya.

hi,
refer to Technical Specification link
Ashu

I cant up load the correct size image for my cover

I cant up load the correct size image for my cover...please help

Hello tiffgill,
I recommend reviewing the following guidelines for page images for iTunes U:
When creating your provider art for your iTunes 11 and iOS 6 or later provider page, keep the following in mind:
Only submit artwork you can legally share.
Provider art must be JPEG or PNG with appropriate file extensions (.jpg, .png).
iTunes U Public Site Manager only supports RGB color profiles.
Artwork must be at least 3200 pixels in width and 600 pixels in height with a minimum resolution of 72 dpi, with a maximum file size of 5MB.
You can upload a single piece of art that iTunes U Public Site Manager can use across all platforms and devices (see sample below). If you upload a single piece of art you must also:
Make sure that any text or logo is in the center of the artwork, in the Text/Logo Safe Area.
The Minimum View is 994 x 600 pixels. Texts or logos should not exceed the Minimum View of 994 pixels and should not exceed 400 pixels in height.
Ensure that you do not include any text or logos in the Tag Area, as this area is needed for iTunes-related tags. The Tag Area is part of the Minimum View and 200 pixels in height from bottom of the artwork.
For more information and the iTunes Design Specifications, see https://itunesconnect.apple.com/itc/docs/itunes-design-specs.html.
You can find the full article here:
Understanding provider page image guidelines
http://sitemanager.itunes.apple.com/help/AboutYourProviderPage/chapter_5_section _3.html#//apple_ref/doc/uid/iTUPSM-CH5-SW2
Thank you for using Apple Support Communities.
Best,
Sheila M.

Missing document flow for STO proc. delivery

Hi Experts,
I have problem with missing document flow for STO proc. delivery. I debugged VL10 and BADI (IF_EX_LE_SHP_DELIVERY_PROC~SAVE_DOCUMENT_PREPARE), I found that document flow parameters (CT_XVBFA) for this BADI interface is empty.
Any comments or solution.
Thanks,
SA

SD functional are satisfied with configuration.
Please advise.
Thanks,
SA

HT201412 Perfectly fine working iPad and I attempted to load the software update provided for settings. Now, all I get is a black screen with an, on again, off again apple. Restore? iTunes doesn't even recognize the device. Force quit does nothing. Now wh

Hello,
Perfectly fine working iPad and I attempted to load the software update provided for settings. Now all I get is an on again off again apple. Attempted hard reset to no avail. iTunes no longer recognizes the device. So......? what? how? where?
Thanks, Richard

And one more point, I am not an Apple user. This is my first experience and have had to learn as I go. So any explanations please break it down for a noob. I am fairly computer geeky but when it comes to Mac or Apple or iAnything... I have zero experience.

How to create a Document Template for "Scanned" PDFs? (Editing isn't necessary.)

I have a Custom Content Type called "Vendor Invoices". It is based off the "Document" Content Type. I would like to create a "Document Template" that will support "PDFs", but the PDFs should always be added via an
"upload" (since these are Invoices that we will be "receiving", there is no need to actually "Create" one). So, I don't need to support "New Document" or the "Drag and Drop" "New Document". I simply
need the users to "Upload" the documents. Although, I have created several Columns for this Content Type (Invoice Number, Invoice Date, Vendor Name, etc) that the user will input when uploading the Invoice (PDF), so I WOULD like the "Document
Information Panel" to appear. Is that only possible by using one of the Office document types?
Any thoughts or ideas on how I might accomplish this?
Thanks!
Shayne

Hi,
According to your post, my understanding is that you want to create a pdf content type.
We can use the PDF SharePoint Cumulative Update 1 to achieve this scenario, it allows you to create new PDF template and then deploy it as a Content Type.
There is an article about this topic, you can refer to it.
https://www.pdfshareforms.com/deployment-of-pdf-template-as-sandboxed-wsp-solution/
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Technical Document Template for developing WD application

Dear SDN community,
Do you have any template for the technical document specific to WebDynpro(Java) development.
Thanks!
Surya.

Look at the below link.. It will help you..
Design Template for development a project in WebDynpro
Raja T
Message was edited by:
Armin Reichert

Logic required to get the missed document nos in arport

Hi Guys,
Document numbers are flowing in to two ODS's. These doc numbers are available in 'X' and 'Y' ODS's.
We are missing some doc nos in both the ODS's.
For example: 101,102,103 doc nos are available in 'X" ODS also 101 1nd 102 also avaialable in'Y' ODS.
But we are missing 103 in "Y' ODS.
we want to display those doc nos in a report.
We Created an infoset on these two ODS's.
What kind of logic is required to display these missed doc nos in a BW Report
Thanks,
Nela

I would suggest to use another DSO, specifically for this missing document numbers with Document Number and two Flags (FLAG1 and FLAG2). Both DSO1 and DSO2 will Source this 3rd DSO (In this DSO, Doc Number will be Unique - No Duplicates).
In the transformation for DSO1, lookup DSO2, compare the Doc Numbers and fill FLAG1 as 'X' on each missing record.
In the transformation for DSO2, lookup DSO1, compare the Doc Numbers and fill FLAG2 as 'X' on each missing record.
Then you can generate two reports for missing Doc Numbers based on FLAG1 and FLAG2.
This is just an example, you could do the same in other optimized ways.... discuss with your ABAPer....

What happened to the Miss Kitty Game for the iPhone

I saw that the Miss Kitty Game was available on August 31st for the IPHONE and then zip it wasn't.. The wicked winnings game is still available. I heard the
Miss Kitty Game now isn't available in the U.S.?? Does anyone know how I can get it and/or if it isn't going to be available.
Thank you

When that pop-up was there originally, you could delete it or keep it and it would be marked as "watched" so iTunes would get rid of it if you had a playlist set up that way, then in one of the later releases of iTunes there was a bug where if you deleted it, it wouldn't get marked as watched when you sync so it would get re-loaded if you had a playlist set to load unwatched videos.
It looks as if their answer to the bug is to allow for a manual delete for videos rather than that pop-up at the end. Also, if the video is watched close to the very end, it also gets marked as "watched".
So, although the keep/delete pop-up thing is gone, you can still free up space by swiping the video and pushing "delete" and now it syncs properly to boot.
So, they decided to use different functionality to address the bug -- maybe they got a lot of feedback wherein people didn't like the keep/delete pop-up.

Visual Upgrade to 2013 - Missing Site Templates for ITTEAM and PROJSING

I've been working on Upgrading some old WSS 3 sites to SharePoint 2013. I Have been able to get all of them imported to SharePoint 2010,and then have imported them all to my Sharepoint 2013 server. Now at the to of all of my sites is the Experience
all that SharePoint 2013 has to offer. Start
now or Remind
me later tag line. I Click the Start Now option and it goes though its Checks and comes back with:
Missing Site Templates
The following sites are using templates that are not yet supported after upgrade:
http://<site>/it/Projects - ITTEAM#0
http://<site>/it/webservices - PROJSING#0
I understand that those Fab 40 Templates are no longer available to create in 2013, though what can I do with the Existing content that I have? Seems wrong to Leave it at the 2010 Visual Representation.
For this one Sharepoint Site I could recreate the 2 Webs. Though on another Sharepoint site there are 123 sub sites with the sa,e two templates. I can't Abandon them. Is there a way to convert them to a new template first? How can I do the Upgrade
and keep my content? If I have to use a new template for new sin sites, I'm fine, I just don't want to lose what I have.
Thanks!

Hi Scooter,
For upgrading Windows SharePoint Services 3.0 to SharePoint 2013, you can refer to the steps as below:
1.First upgrade:
Upgrade the content to Microsoft Office SharePoint Server 2007
http://www.fpweb.net/support/microsoft-sharepoint/tutorials/wss-to-moss-migration/
2.
Second upgrade: Upgrade the content to SharePoint Server 2010 Products
If your environment is SharePoint 2007 32 bit, you need to upgrade your SharePoint 2007 32 bit to SharePoint 2007 64 bit firstly.
http://bhavinsharepoint.wordpress.com/2011/09/07/step-by-step-migration-from-moss-2007-to-sharepoint-2010/
http://badarinathanagaraja.wordpress.com/2010/06/11/upgrade-from-sharepoint-2007-to-sharepoint-2010-environment/
3.
Third upgrade: Upgrade the content to SharePoint Server 2013 Products.
http://technet.microsoft.com/en-us/library/cc262483.aspx
http://epmsource.com/2013/05/02/migrating-ps-2010-to-ps-2013-walkthrough/
Reference:
http://blogs.technet.com/b/praveenh/archive/2013/10/31/upgrading-from-wss-2-0-to-sharepoint-2013.aspx
http://technet.microsoft.com/en-us/library/ee947141.aspx
Also make sure you are upgrading to SharePoint 2013 Standard or Enterprise edition for your site templates working. You can have a look at the thread:
http://social.technet.microsoft.com/Forums/en-US/caeb109b-f62b-4898-b84d-68f2f9feb872/site-templates-missing-in-sharepoint-2013-foundations?forum=sharepointadmin
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
contact [email protected]
Eric Tao
TechNet Community Support

How to change the default print template for broadcast PDF Export

Hi,
I have currently designed a print template for printing purposes and use this as the template for the print button(Export to PDF),if i were to click on this button the output pdf is the desired PDF. But if i were to broadcast the template with output format as PDF it picks the layout of the current template, how do i set broadcast to pick up the print template also???
Further how to insert a page break in a PDF print template.

Hi Nagesh,
These setting are for
1.Adhoc Template for Queries
2. Adhoc Template for reports designed through report designer
3. Template for query precalculation
4. Template for displaying broadcasting wizard.
When we use broadcasting from query designer to email PDF's the system uses 0QUERY_TEMPLATE_BROADCAST_PDF.
From WAD the system uses the current template layout as PDF Layout.
P.S: OSS note 1054460 -Depending on the BI object type and possibly other criteria, different Web templates are used in BI broadcasting to generate PDF (and PS or PCL) formats:
For Web templates: the Web template itself is used

Load the missing document templates for SOLAR01, 02

Similar Messages

Maybe you are looking for