Load threshold violation - gap in voice audio

Hello,
I have a lot of 7925 Phones, two 3750 with integrated WLC (6.0.188).
The Costumer says that he has a lot of gaps in voice audio. I have testet it and can't recognize any gap.
I said to the customer that he has to write down the time when there are any problems with the audio stream.
I could recognize that there is a minor alarm in the wcs at the same time when the problems occur.
I could also see in the log of the ap that there is an reset of the a radio after the alarm is generated
The WCS Error message is
Load threshold violation reported by '802.11a' interface of AP 'AP-DE-HQ-033', connected to Controller.....
What could be the reason of these error message? Wich kind of treshold is meant and where i can configure it.
I hope someone can help me

Sir,
The load threshold violation is generated because of client count on a given AP, I am not aware of any bugs or features that would cause this to occurr in correctly. basically this alarm is triggered when the client count exceeds the preset threshold value which I believe is 12. You can find this threshold under Wireless> 802.11a> RRM>General (on WLC 6.0.118.0 code, it'll be in the same general area on 4.2; Don't confuse it with the coverage hole threshold which is usually 3). Definitely check the client counts on the access points have the issues.
If you are violating this threshold there are a couple of options: 1) raise the threshold to a higher value; the downside to this is if you get too many clients on a single AP it can have adverse effects on all the clients. 2) add more access points to lower the possibility of all clients being on 1 AP..
Hope this helps,
Kayle

Similar Messages

Retrive load threshold violation reports using NCS 1.0.2.29?

Hello!
I would like to retrive some specific reports from the NCS regarding load threshold violation on some specific 1142N accesspoints. Using the alarm browser don´t help me that much because you cant see the history of how many alarms each AP has generated, only cleared alarms. The reason to this is that I would like to see if there is any issues in different system campus with APs that report this alarm.
Most of the APs are associated to maps. The NCS version that I run is 1.0.2.29. WLCs are running 7.0.220.0.
If there is any other way to see this information I´m happy to get that information.
Thanks!
/Johan Jongen

Hello!
I would like to retrive some specific reports from the NCS regarding load threshold violation on some specific 1142N accesspoints. Using the alarm browser don´t help me that much because you cant see the history of how many alarms each AP has generated, only cleared alarms. The reason to this is that I would like to see if there is any issues in different system campus with APs that report this alarm.
Most of the APs are associated to maps. The NCS version that I run is 1.0.2.29. WLCs are running 7.0.220.0.
If there is any other way to see this information I´m happy to get that information.
Thanks!
/Johan Jongen

Load threshold violation 802.11 a/n

I keep getting these minor alarms "Load threshold violation 802.11.a/n". Where are these thresholds defined? I have Prime 2.1 and 5508 controllers 7.6

John,
You can change the alert threshold for each band via Wireless > 802.11(a/n/ac) or 802.11(b/g/n) > RRM > General. You will see Profile Threshold For Traps and there you can increase or decrease the number of clients associated to a radio that will trigger the alarm.
You can also do this through the CLI with:
config rf-profile client-trap-threshold NUMBER
Hope that helps!
Randy

Load threshold violation

I see many "Load threshold violation" messages in NCS server. any idea why and how can i fix it?

Thresholds are usually set on the WLC. Its up to you to leave it at default or you can adjust that.
Sent from Cisco Technical Support iPad App

Dropped clients and Load threshold violation

Can someone tell me if a load threshold violation can lead to dropped clients. Is this error message just a notice or does the controller drop clients after reaching the threshold value.
Thanks
Chris

Can you do a show wlan for me and post the results.
Do you have load balance enabled ?
"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
‎"I'm in a serious relationship with my Wi-Fi. You could say we have a connection."

What does Load threshold violation reported by '802.11b/g' mean?

I am assuming it is too many laptops on an access point. This environment has 24 laptops on a cart used in 1 room so shouldn't the controler divy them up between the 2 antennas in the 1142 which is sitting right above them?
thanks
Gary

Hi Gary,
Just to add a note here to the good info from my friend Leo (+5 ponts L-Man)
You are most correct about the nature of this alarm;
WCS Message AP ''{0}'', interface ''{1}." Load threshold violated.
Symptoms A radio interface of an access point is reporting that the client load has
crossed a configured threshold.
WCS Severity Minor.
Probable Causes There are too many clients associated with this radio interface.
Recommended Actions Verify the client count on this radio interface. If the threshold for this
trap is too low, you may need to readjust it.
Add new capacity to the physical location if the client count is a frequent
issue on this radio.
As Leo noted, the dual antennas in "Diversity" mode won't help to mitigate
this issue. Only adding another AP can help load balance the client load
Cheers!
Rob
Please support CSC Helps Haiti
https://supportforums.cisco.com/docs/DOC-8895
https://supportforums.cisco.com/docs/DOC-8727

Load threshold violation reported

I need a WCS report that will actually give me the top n Wireless Access points that have too many clients trying to authenticte to them.
We have some serious capacity issue in meeting rooms but we need a ball park figure of how many WAPs might be affected.
I know I can interogate the WCS to drill down and find out that WAPs are exceeding their threshold I just need to have a decent report generated.
I have searched the reports from WCS 6.0.202.0 and cannot seem to find anything that suits.
Many thanks for your help.

This is interesting not to find it easily.
I spent an hour looking for such thing but it does not seem to be found direclty on WCS (I am using 7.x).
There is a template in Device -> Busiest APs. this shows busiest 5 APs but it does not seem to show them in term of number of users. it shows them in tx and rx utilization.
There should be a template under device also that list APs and there should be an option to show the clients per AP.
You can do it the other way (which is stupid to do it this way unless really needed) is to do a report to list all clients then you may open the CSV file via MS excel and filter per AP.
Cisco should really add support for this. It seems they stupidly forgot to add "client count" field in AP summary (or wherever in AP reports where showing client count is valid).
Sorry for not being able to help much

Scratchy background in voice audio

I recorded several voice clips in Garageband. When I play them back, they sound like a crappy AM radio band. I recorded my voice (male) and transformed it into a female voice. What settings will clean up these au

Sir,
The load threshold violation is generated because of client count on a given AP, I am not aware of any bugs or features that would cause this to occurr in correctly. basically this alarm is triggered when the client count exceeds the preset threshold value which I believe is 12. You can find this threshold under Wireless> 802.11a> RRM>General (on WLC 6.0.118.0 code, it'll be in the same general area on 4.2; Don't confuse it with the coverage hole threshold which is usually 3). Definitely check the client counts on the access points have the issues.
If you are violating this threshold there are a couple of options: 1) raise the threshold to a higher value; the downside to this is if you get too many clients on a single AP it can have adverse effects on all the clients. 2) add more access points to lower the possibility of all clients being on 1 AP..
Hope this helps,
Kayle

Error Message - java.lang.LinkageError: loader constraint violation

Hi
I get the following errormessage if I try to apply a more recent build of the JPA Toplink Essentials.
If I use the glassfish-persistence-installer-v2-b45.jar all things work fine, but if a try to upgrade my program will fail. I tried the glassfish-persistence-installer-v2-b54.jar, all also tried all builds between?!
I have no idea how I may resolve the problem?!
Any ideas?
Thanks
Marcel
(I am using Java 6, Netbeans 5.5)
Exception in thread "AWT-EventQueue-0" java.lang.LinkageError: loader constraint violation in interface itable initialization: when resolving method "DatenStruktur.ConditionBasic.getCouplingElement()LDatenStruktur/CouplingElement;" the class loader (instance of oracle/toplink/essentials/internal/ejb/cmp3/JavaSECMPInitializer$TempEntityLoader) of the current class, DatenStruktur/ConditionBasic, and the class loader (instance of sun/misc/Launcher$AppClassLoader) for interface DatenStruktur/Conditionable have different Class objects for the type DatenStruktur/CouplingElement used in the signature
at java.lang.Class.getDeclaredFields0(Native Method)
at java.lang.Class.privateGetDeclaredFields(Class.java:2291)
at java.lang.Class.getDeclaredFields(Class.java:1743)
at oracle.toplink.essentials.internal.security.PrivilegedAccessHelper.getDeclaredFields(PrivilegedAccessHelper.java:204)
at oracle.toplink.essentials.internal.ejb.cmp3.metadata.MetadataHelper.getFields(MetadataHelper.java:443)
at oracle.toplink.essentials.internal.ejb.cmp3.metadata.MetadataDescriptor.usesPropertyAccess(MetadataDescriptor.java:1081)
at oracle.toplink.essentials.internal.ejb.cmp3.metadata.accessors.ClassAccessor.processAccessors(ClassAccessor.java:564)
at oracle.toplink.essentials.internal.ejb.cmp3.metadata.accessors.ClassAccessor.process(ClassAccessor.java:498)
at oracle.toplink.essentials.internal.ejb.cmp3.metadata.accessors.MetadataAccessor.processAccessor(MetadataAccessor.java:514)
at oracle.toplink.essentials.internal.ejb.cmp3.metadata.accessors.ClassAccessor.processTableAndInheritance(ClassAccessor.java:1388)
at oracle.toplink.essentials.internal.ejb.cmp3.metadata.accessors.ClassAccessor.process(ClassAccessor.java:484)
at oracle.toplink.essentials.internal.ejb.cmp3.metadata.MetadataProcessor.processAnnotations(MetadataProcessor.java:240)
at oracle.toplink.essentials.ejb.cmp3.persistence.PersistenceUnitProcessor.processORMetadata(PersistenceUnitProcessor.java:370)
at oracle.toplink.essentials.internal.ejb.cmp3.EntityManagerSetupImpl.predeploy(EntityManagerSetupImpl.java:600)
at oracle.toplink.essentials.internal.ejb.cmp3.JavaSECMPInitializer.callPredeploy(JavaSECMPInitializer.java:169)
at oracle.toplink.essentials.internal.ejb.cmp3.JavaSECMPInitializer.initPersistenceUnits(JavaSECMPInitializer.java:237)
at oracle.toplink.essentials.internal.ejb.cmp3.JavaSECMPInitializer.initialize(JavaSECMPInitializer.java:253)
at oracle.toplink.essentials.ejb.cmp3.EntityManagerFactoryProvider.createEntityManagerFactory(EntityManagerFactoryProvider.java:140)
at javax.persistence.Persistence.createEntityManagerFactory(Persistence.java):96)
at javax.persistence.Persistence.createEntityManagerFactory(Persistence.java):73)
at MainProgramManagement.ProgramMain.getEntityManagerFactory(ProgramMain.java:347)
at MainProgramManagement.ProgramMain.persistData(ProgramMain.java:788)

upgrade to cf8, which supports jdk 1.6.
mx7 does not support 1.5 or 1.6
Azadi Saryev
Sabai-dee.com
http://www.sabai-dee.com/

When I'm playing games on my Mac, I want to my viewers (from YouTube) to hear whats going on in the game, as far as I know, I can only record my voice audio, and the screen. Is there anyway I can record game audio too?

When I'm playing games on my Mac, I want to my viewers (from YouTube) to hear whats going on in the game, as far as I know, I can only record my voice audio, and the screen. Is there anyway I can record game audio too?

When I'm playing games on my Mac, I want to my viewers (from YouTube) to hear whats going on in the game, as far as I know, I can only record my voice audio, and the screen. Is there anyway I can record game audio too?
You have two basic options. One is to use a commercial screen recording app with access to system audio built into the app and the other is to add a system extension like SoundFlower that allows the QT X screen recorder to access/record the system audio. I use the former so I am not that familiar with SoundFlower but there should be several posts to this forum covering this topic.

How do you record voice audio?

Hi, I have been unable to record any voice audio at all. I have tried several types of microphones, and went directly into garage band, but no audio has been recording at all. The speaker part of the audio is working just fine.
I am wondering if perhaps garage band is not set up properly, or if there is a problem with the sound card or driver? However, since the audio out is working fine, it seems that there may be some other issue somewhere.
Any help or suggestions would be much appreciated!

Hi-
I was wondering if it was a driver or a sound card issue?
It is neither.
Unless you have a special microphone with a built-in preamp (self powered), like DaddyPaycheck said, standard microphones run at line level, and won't work with out a preamp.
http://support.apple.com/kb/HT2839
Alternatively, check out the iMic:
http://www.griffintechnology.com/products/imic

Java.lang.LinkageError: loader constraint violation

I am using ToplinkEssentials as a persistence provider in a J2SE desktop application. I've encountered the following error.
java.lang.LinkageError: loader constraint violation: loader (instance of sun/misc/Launcher$AppClassLoader) previously initiated loading for a different type with name "expendituretracking/Employee"
I have unsuccessfully searched for a clue as to what is causing this problem. Any help is appreciated.

Hello,
Could this be related to the bug described at:
https://glassfish.dev.java.net/issues/show_bug.cgi?id=2625
If you have an interface involved, try adding them to the persistence.xml's list of classes.
Best Regards,
Chris

LG Cosmos 2 is not sending or receiving voice audio

My daughter's LG Cosmos 2 is not sending or recieving voice audio. IT doesn't matter if she makes the call or recieves the call. It doesn't matter if you call her from a verizon cell phone or a land line. Whenever she uses the phone neither party can hear each other. Texting works fine and all other features seem to work.
Can anybody think of a setting that may have gotten horked on her phone or is it probably defective? She's only had it for less than a month and has not damaged it in any way.

Is your web browser working normally?

How to play music or voice audio from my computer though my sterio system.

How can I play music or voice audio from my iMac G5 computer though my sterio system. I have tried everything I can think of. I just can not get the audio from my computer to play though my sterio system. I want to take the audio from my computer and record it back to audio cassett. Please tell me there is a easy way to go about this LOL. Thanks.

I wanted to give a big thanks to all that gave me great and very needed help. I wanted to let everyone know that. I did fix my problom with get music out of my computer and into my stereo. Here is how I did it. If you already have a stereo with a RCA line in you are good to go. All you need is a hifi-link I got one from circuit city. With it you can take the music from your computer be PC or Mac and play it though your stereo but again your stereo must have a audio in for you to get music to come though your stereo or at least it was the only way I could get it to work for me. Oh and you will need a free USB port on your computer for the hifi-link to hook to see it dose not us your computers audio card. Instead it go's though your USB. It work just great. But you should read on the back of the box or when you are looking for iy on the net make shour it will work with your computer some older systems it will not work with.
I have been needing a new stereo for sometime now. I really like shelf stereo systems. So I got me a Sony MHC-GX570XM. Now it sells for $249.95. Now I did a search for this system and the only plays I could find that sells it was Sony. Now here is the kicker I went to Sams with my Dad. We had stoped to look a the flat screen TVs. As we were walking away from the electronics. I saw it as plain has day there it was in all it glory. Now the crazy thing is this system was not on there web site though it could be now. But when I was looking for this cool system they did not have it on there web site. I got this system for get this $199 thats like I think $50 off the asking price. Now I would have been more then happy to pay the $249.95. I liked to have had a fit right there in the store LOL. I thought I was going to have to order it online. If I had did that I would had haved to pay even more with s/h...
Now two of the big reasons I got this system was for the PC/line in or you can hook up a MP3 player and play it though the system very cool. Sec reason It has to cassettes decks 1 plays and the other recordes. The really cool thing is it is XM radio ready. Though you will need a XM membership and a XM antina. But from what I have read thats all you need. It also has a 3 CD changer that swivals. It has so many cool thing I can not name them all. Now this system my not be for everyone. But it dose all that I need and more. Also it really helps to have a hifi-link so you can hook it to your computer the easy way and not have to go though your sound card. Thanks again for everyones time and help.

What is the best audio or voice audio recording app for iPhone 5 because I want to record audio at a book signing event this coming Tuesday!!!

What is the best audio or voice audio recording app for iPhone 5 because I want to record audio at a book signing event this coming Tuesday!!! Please get back to me as soon as you can! Thanks

Ok sorry to bug ya again but if I use the voice memos app if I have the screen locked and just on my belt clip on my side of my pants will it still pick up the authors voice and do I need to have all the volume turned all the way up for it or do I get the app u said for better sound?

Load threshold violation - gap in voice audio

Similar Messages

Maybe you are looking for