Load time for a 1hr m2v and wav timeline

Hardware: Intel P4 3.2ghz, 3GB ram, Nvidia FX 5700, Asus P4C800 mobo, m-audio delta-66 sound
I'm experiencing a lengthy  wait time to load a 1hr  video and sound track as timeline.  It has been loading for over 25 minutes now and thelittle splash screen reports over an hour to go... as I write this note.
I'm curious if that is about normal an this kind of hardware?  I ask because I loaded the same video and sound file into DVD architect in less than a minute. and I've had really bad trouble with Encore CS4 crashing repeatedly.  Or locking up and having to be killed.
I moved the whole shooting match to a different machine and am able to at least run Encore, but wondered if the lengthy load time is a signe of trouble on this machine too.
Oh, and nothing else going on while the video is loading... (just normal stuff running as always)

the_wine_snob wrote:
Harry,
Tell us about the I/O sub-system, i.e. your HDD's, their size, speed, controller type and how they are allocated. The operation of Importing is highly dependent on the I/O.
I forgot to mention the OS too.  WinXP pro sp/3
HDD:
1 IDE 250 GB partition1 65 GB OS, partition2 185 GB data
2 Sata 200 GB No partitions
All are 7200 rpm (or whatever the 7200 stands for)
The work is located on 1st sata drive (E)
Common stuff for the hardware its on.  Also I recall loading stuff in `the blink of an eye' when I was using CS2 Encore (On this same machine, but no longer no installed)
I see a monster thread here about Nvidia cards and Encore crashing.  I do have an Nvidia FX 5700 as mentioned earlier, and it has the latest drivers available at nvidia site.
Also I have hardware acceleration set at 50 percent... Encore will not run with it set 100 percent.
Acceration itself should not come into play when importing right?

Similar Messages

  • Increase in Loading time for LV search in 2011

    Initially when I loaded LV2011 my quick drop and the search took nearly 5 seconds but now it takes nearly 20 seconds to load so is there any reason for this kind of performance. Also I don't have anyother big software loaded or running in my PC. I have added few toolkits from VI package manager may be that is the reason?.
    The best solution is the one you find it by yourself

    RavensFan wrote:
    In my message in the other thread, I commented that I thought 20 seconds wasn't all that long.  But I thought you were commenting on the loading time for LabVIEW itself.  That does seem like a long time for any of the internal LabVIEW dialogs to come up.
    (Actually, I find several internal dialogs seem to take longer to load the first time then they should including the properties dialog.  But not 20 seconds long.)
    Hopefully, with this message thread in the LabVIEW forum, others can comment and offer suggestions on how to determine what the issue your having is.
    Yes now I have plenty of toolkits ( Thanks for spotting me in the other thread )
    Jeff you hit the bullseye. The loading was set as Load palette when needed.
    Thanks
    The best solution is the one you find it by yourself

  • HT5622 When updating my apps am being asked several times for my appleId password and even when providing it, it keeps asking and still doesn't update anything, any suggestions?

    When updating my apps am being asked several times for my appleId password and even when providing it, it keeps asking and still doesn't update anything, any suggestions?

    Does the username and password you try to use have administrator privileges? You must input an admin username and password to install. 

  • I am having issues with adjusting the duration of time for each still frame and transition in imovie 11.  Each time that I adjust these times, the app does not accept the change, and automatically enters its own time. Am I doing something wrong?

    I am having issues with adjusting the duration of time for each still frame and transition in imovie 11.  Each time that I adjust these times, the application does not accept the change, and instead automatically enters its own time. Is there a work around this? Or am I doing something wrong? Please Help!
    Thank you,
    lagrl

    Have you tried turning off automatic transitions ? Choose file - project properties and follow the dialogue box to change duration with a slider.  iMovie also doesn't allow a transition to be more than 50% duration of the clip its attached to. In other words if the clip is 4 seconds the transition cannot be more than 2 seconds and remember that relates to the first clip as the following clip (right side) is pulled back to overlay it.
    Does this help.  Perhaps you already know this ?

  • When I use update software from my mobile it take long time for checking update software and no thing happened to update my IOS software

    When I use update software from my mobile it take long time for checking update software and no thing happened to update my IOS software

    Servers have been swamped. Keep trying and be patient. Wait a few days.

  • Slow load times for itunes u

    We have noticed that lately iTunes U for UW-Whitewater (uww.edu) has been extremely slow, and sometimes even timing out.  We have been trying this from various different locations and computers.  It appears to be something on the apple side.  Has anyone else seen this?
    Apple Engineers: Any updates as to what might be going on?

    Greetings Guys;
    We had the same issue yesterday, but the issue seemed to be affecting only the iTunes desktop application.  When I would preview using the iPad, load times were normal.  The issue seems to have been resolved this morning.
    Syd Rodocker
    Tennessee State Department of Education

  • Hi Today I Bought a Brand New iPhone 5s And It Woked Fine For About 3 Hours And Then It Just Shut Itself Down, It Goes To The Apple Logo Then To The Loading Screen For About 15 Minutes And Then It Shows A Blue Screen And Then Repeats Please Help!

    I Was Really Excited About My New Phone And Now It Is Just Completely Messed Up. It Shut Itself Down After About 3 Hours Of Use And Now It Just Goes From Apple Boot Logo, To Loading Screen, To Blue Weird Screen, And Then It Goes Back To The Boot Logo. When I Plug It Into My Computer It Recognizes The Phone But It Doesnt Show Up In iTunes 11 PLEASE HELP

    Can you do a Reset by holding the Sleep button and the Home button at the same time for about 20 seconds?

  • CS3 Video Encoder w/ .m2v and .wav files

    Hello - I use the CS3 video encoder to prepare Youtube videos. I usually input an avi file and it works great. However, I have a few videos which are seperate video (.m2v) and audio (wav) files. What is the easiest way or best program to use to enable me to convert these files for use w/the video encoder?
    TIA

    Premiere & After Effects can do that, if you don't have these tools, then you can also use some free tools: check www.videohelp.com for more information on this.

  • How to decrease loading time for 0Mat_Plant

    Hi Experts,
    I am currently looking to decrease loading time of 0Mat_Plant. I have gone thru performance material available and checked following things listed below :
    Plz note following:
    1) Standard delta is avail but it has been enhanced and there are Z fields. So if i use delta, them I might be missing delta for Field.
    2)Can we switch OFF number range SID buffering to avoid memory allocation on daily basis ...somehow through ABAP program?
    3) BUffering can be switched OFF, but there is delta load also alonwith full load. So performance would decrease for delta records. But no of records for Full load is 188000 and for delta is just 1700 around. SO will this helps in decreasing overall time? Any idea?
    Load is taking around 90 minutes in my system (Full Load)..
    I m not clear abt data package size and if it will help me or not..
    What more can we do??
    Any help would be appreciated and points would be assigned......
    Thanks in advance
    Gaurav
    Message was edited by:
            Gaurav

    Hi Nagesh,
    Here are my replies;
    1) Loading time is only for 0mat_plant..
    2) R/3 job finishes quickly....no prob seems to be with this..
    3) I m not clear about "locked trfc..but there are no errors in trfc...and there doe snot seem to be IDOC clogging problem...
    4) Not sure what yu mean by trfc "released"....
    I checked R/3 JOb log and its pasted below ( though for other datasouce)....
    I want to know wht does it implies.....in general  i hve few questions listed below after the log..::
    BEGIN BW_BTE_CALL_BW204020_E 13.514
    END BW_BTE_CALL_BW204020_E 13.514
    BEGIN EXIT_SAPLRSAP_002 13.514
    Datasource:0MATERIAL_ATTR, In: 13.514 , Out: 13.514
    END EXIT_SAPLRSAP_002 13.514
    Asynchronous send of data package 1 in task 0002 (1 parallel tasks)
    IDOC: Info IDoc 2, IDoc No. 442405, Duration 00:00:00
    IDoc: Start = 26.06.2007 19:34:06, End = 26.06.2007 19:34:06
    tRFC: Data Package = 1, TID = 0A01A001012F4681A2A7362D, Duration = 00:0
    tRFC: Start = 26.06.2007 19:35:03, End = 26.06.2007 19:35:04
    BEGIN BW_BTE_CALL_BW204020_E 0
    END BW_BTE_CALL_BW204020_E 0
    BEGIN EXIT_SAPLRSAP_002 0
    Datasource:0MATERIAL_ATTR, In: 0 , Out: 0
    END EXIT_SAPLRSAP_002 0
    Asynchronous transmission of info IDoc 3 in task 0003 (0 parallel tasks
    IDOC: Info IDoc 3, IDoc No. 442406, Duration 00:00:00
    IDoc: Start = 26.06.2007 19:35:04, End = 26.06.2007 19:35:04
    Synchronized transmission of info IDoc 4 (0 parallel tasks)
    IDOC: Info IDoc 4, IDoc No. 442407, Duration 00:00:00
    IDoc: Start = 26.06.2007 19:35:04, End = 26.06.2007 19:35:04
    Job finished
    I want to confrm my understanding abt extraction process when infopackage gets triggerred...
    Infopackge gets triggered....->R/3 job gets created/triggered....-> Info iDoc regarding request sent to BW..-> Application document(??)) posted..(( posted to what???....  passed to Trfc??....and then to psa which is seen in monitor??))...
    Like wise after successfull passing of datapackage to BW ( not posting to pSA) , next datapackage is sent..... and so on...
    What is TRfc??  .as far I know its function modules created to pass data to bW thru RFC call...(??)...
    IF you can give me clear picture of whts happening behind the scenes, it would be great.. or helpful links would do....it would be help me to enjoy wht you ae saying and how to tune more...
    THanks for your patience and help...
    Already assigned points to you..
    PS: I hve turned OFF buffering for master data records greater than 100, 000 and saved approx 25% for each master data records....
    Regards
    Gaurav

  • Long loading times for Safari on iPad Air with iOS8

    I've had long loading times in Safari sInce upgrading to iOS8 on my iPad Air 128 GB. Are any of you having the same experience?

    Sometimes I question myself, how come that iOS being held in beta for over quarter or even over a half a year, and most certainly long enough in alpha, still comes out so much raw and buggy every release? Sometimes it feels like it's only getting worse concerning the debugging.
    I wanted to address the HR manager of the Apple Inc. to query him/her about HIS/HER dedication to the overall work being done. Why, the ****, does Safari get slow, why, the ****, is it unpredictable to define whether a sound stream in Safari's tab will end upon tab closure or not. Morever, why do iPhone iMessages fail to mark a message or a chain as a read one even thought you just really did it. Beyond that miriad of similar questions I have just another three, since when is it official Apple support position to advise you to wipe out your device and install everything back from iTunes, not the cloud? But what is more important, how come that support representative tells you first to back up your buggy iPad, wipe it out and restore from that backup both with iTunes? Finally, we all know how Apple does cherish it's developers, can somebody tell me how, for heavens sake, this website ever possible to exist then — Texts From Xcode?
    I don't want neither need to mention that switching between tabs in iOS7 (I have had no chance to test it in iOS8) in Safari never gave you any sure answer whether your tab will be reloaded when you get back or not: whether have you copy any post before leaving, to paste back on return or not.
    After all I do still love Apple, I do love people's ideas. I do love the overall outcome, but I want to tell Mr. Cook one phrase I heard when I used to be a head of a department in a medium size company and had to deal with continuous fails of the personnel and most often ended up doing much things myself, it was not the exact situation as with Apple although I hope you can trace a path: If a manager has to do anything besides managing he or she failed to manage one major issue — the personnel one.

  • Very Slow Load Times for PDF Document

    Hi,
    I have a PDF document that takes forever to load in preview (on the order of a minute or more). It is eight pages, but when I try to go to the last two pages, each of which has a drawing created by using Autoshapes in Microsoft Word, again they take a minute or more to load.
    The document looks to have been created by Acrobat 6 for Windows from a MS Word document. Adobe Reader 7.0.7 on another machine loads the document correctly and speedily (well, as speedily as Adobe Reader can...).
    Are there known problems with this type of graphics, MS Word drawings, in a PDF document? Is there any way I can make the document load faster?
    Thanks,
    Jeff Corbets

    Hi there
    I have a tutorial on this process available at the link below:
    Click here to view
    Cheers... Rick
    Click here for Adobe Authorized Captivate and RoboHelp HTML Training
    Click here for the SorcerStone Blog
    Click here for RoboHelp and Captivate eBooks

  • Reverse Proxy and Load Balancer for SMP 2.3 and Agentry Application

    Hi Expert,
    I'm putting in place a mobile solution composed by SMP 2.3 SPS 4 and SAP ECC 6.0. In the SMP 2.3 I created the agentry server and I have deployed my agentry application.
    My SMP/Agentry infrastructure is composed by two servers therefore I need a load balancer for balance the load into the several servers. Furthermore I need to use a reverse proxy in my DMZ zone.
    Based on what indicated in the SAP note "1904213 - SAP Mobile Platform Server Release Information" the Apache Reverse Proxy is not supported for Agentry clients. Agentry uses nginx for Reverse Proxy.
    I also found the following document How-to-Guide for Reverse Proxy and Load Balancing in SAP Mobile Platform 3.x that explain how to set-up a reverse proxy and load balancer with nginx and apache.
    Both the SAP note and the HOW to document are refereed to SMP 3.0 and not to SMP 2.3.
    I would know if the NGINX must be used also for SMP 2.3.
    Any suggestion/information is appreciated.
    Thanks in advance
    g.

    Please see Agentry Network Landscapes

  • BAPI/ Functoin Module/ Standard Load porgram for T-code QS41 and IW61

    Hi,
    Dose anybody know BAPI/ Functoin Module/ Standard Load porgram for loading
    Catalog code (QS41) and Historical work order (IW61) in Plant maintenance module.
    Regards
    Sanjay

    Hi Sanjay,
                      There is a 2 BAPI's for loading Catalogs
    1)  BAPI_QPGR_REPLICATE - to create Code group
    2)  BAPI_QPGR_SAVEREPLICA - to create Codes
    Thanks,
    Shobha

  • I'm being charged three times for the same service and I can not use it

    Hello, A few months ago I tried to buy Adobe Creative Cloud when putting the data on the card told me that there was a mistake, then I tried other cards ... in short, I'm being charged three times for the same product twice a card and once in another obviously no "mistakes", the problem is that I can not use the product. I want to give low in all three accounts and also be compensated for the time they have charged me three times. Please, I need to solve this urgent problem.

    This is an open forum, not Adobe support... You need Adobe support to cancel a subscription
    -cancel http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
    -or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

  • Extremely long load times for Cisco's WEBEX.

    Thanks

    My company attends numerous meetings with our customers/suppliers and WEBEX is giving me headaches. 5-15 minute load times. Conference room PC is running win7 and I've tried both google chrome's webex app and just running webex from IE to no avail. These connections do go through eventually but I'm constantly hounded about why they are taking so long and I don't know why. Have any of you experienced this or have any clue as to a possible root cause?
    This topic first appeared in the Spiceworks Community

Maybe you are looking for