Load time of reply window
The load time of the reply window is rather long, somewhat of 10-15 seconds (either at home or at the office).
With this feature we will never be able to get into the reach of Dennis/Altenbach/Ben
Laura could something be done about this?
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!
Well I just timed it:
56 seconds from hitting the reply button until an edit postion..
I append I screenshot I made after 10 seconds:
see attachment
This stays the same while the status bar of Firefox 2.0 says: Connecting with forums.ni.com and waitn for forums.ni.com
Ton
Message Edited by TonP on 01-27-2007 08:49 PM
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!
Attachments:
LoadTime.PNG 45 KB
Similar Messages
-
Windows Compatibility (IE) / Load Time / PNG Files
I host my website on Mobile Me and have had several Windows users look at my site complaining about load time and scrolling issues (up and down the frame is jumpy). I have heard that some older versions of IE cannot work with PNG files very well. I suppose this "may" be the issue. Any thoughts on how to get the web site working more smoothly for those people on Windows using IE? Also, some Firefox users have stated they too have issues when viewing via a Windows a system. Thanks...
Hi!
yeah I initially went through some pains in getting my music to play back under IE as well
www.mafmusic.net
first, post your website
i will then it on my computer (a dual quad core mac pro) and my wife's macbook pro
using both firefox and safari
i also have a pc here (piece of crap) that i can use to test it using ie if you wish
or ask my friends
to test it
i am almost retiring, but have been working from our home for the past few years on a pc
i do database design and data analysis
let me know what you think
about these suggestion
take care and good luck
ps if you like music go to my site and let me know what you like, etc
am open to suggestions -
Opened Firefox as usual. This time a small window opened with a tab that says "connectiing" but nothing loaded.
Downloaded newest version. Updated. Same thing.
Uninstalled the old version. Installed again. Same thing.
After installs it has two tabs that say "connectiing" but nothing loaded.
Toshiba Satellite running VistaA possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls -
Long Windows XP loading time???
Hi, I have a very strange problem with my computer.
Whenever I turn my computer on after it has been off for a few hours, the Windows XP loading time is very long. It keeps loading for more than a minute at the Windows XP logo with the blue srolling bar and finally comes to the login screen. This only happens the first time after the computer has been off for a few hours. Once I'm in windows I can reboot several times without any problem, then the loading time is only 17 seconds counted from the second windows starts to load till the login screen. In other words cold boot takes very long to load but not warm boot. What can be the cause of this? I cant figure it out, please help me.
My system:
Pentium 4 Northwood 3.0GHz
MSI P-FISR 865PE
2 X 256MB Corsair Value RAM
Hitachi Deskstar 7k250 160GB SATA
ANTEC SONATA with 380W PSU
Gainward GeForce FX 5900 128MB
NEC 2500A Dvd-burnerHow many programs have you got that are booting up while windows xp starts? If you have loads of programs enabled at the startup that can vastly slow your system.
When you are on the desktop. Click on Start Button
Click on Run. In the box type: msconfig. Click on OK.Click on startup, and just disable the programs that you don`t need, ie winrar, win media player, etc. Infact, give me a list of all the programs you have in the startup and we will take it from there.
Also, you might want to adjust your dram settings of your ram. I noticed when I changed my ram from generic ram to a brand name, ie in your case crucial, that it performed slowly, but when I adjusted the ram settings accordingly, my bootup speed increased and it boots up in roughly 25 seconds. You need to get to DRAM Timing in BIOS and manually set the timings first start with setting SPD off, then experiment with the timings.
I suggest that you do try to Relax those Timings..Try 3.0-3-3-8-8 or 2.5-3-4-8-8......You may also want to try uping the VDIMM Voltage a little more, try 2.75V or 2.8V.
Get back to me about point 1 and we will have a look. -
New gen 4 touch. first time on itunes window comes up needs at least version 10.6.3...i downloaded this but still asks every time and cant load music
See the futher information area of Troubleshooting issues with iTunes for Windows updates for download advice and direct links if required.
See this migrate iTunes library post for advice on moving the library over from a previous computer and this post on deduplication.
tt2 -
Windows loading time is too long!
After I installed Desktop manager ver4.6 to my PC . PC loading time is very long,
It takes 3 minutes to load desktop screen when turning on PC . (without Desktop Manager it takes one and 30 minutes)
Does Anyone have same issue ? OS: XP pro
After finish loading I do not feel slow.
please help me out .
Solved!
Go to Solution.Do you have the Desktop Manager set to load when the computer boots up? If so you can disable that by going into Add/Remove Programs, select the Desktop Manager and hit the Change/Remove button. Hit Modify, select the BlackBerry Desktop Manager and hit Next. You want to keep going through the wizard to pick the same options you did when installing it. When you're on the last screen before you hit 'Install' uncheck the box that says to start the Desktop Manager when the computer starts.
If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
Remember to resolve your thread by clicking Accepted Solution. -
I am trying to edit a page and I only have a css page which is local linked to the page. It only affects me when trying to work in split or design view. I hav tried disabling the linked files thing and I have tried this http://kb2.adobe.com/cps/887/cpsid_88742.html also, but I am still getting this long time. It seems to only affect the load time when I have the following in my head tag;
<link rel="stylesheet" type="text/css" href="css/main.css"/>
It also slows the performance drastically, If I type the letter "D" then deleete that letter it will freeze up for a for a short period of time. I can not have this when trying to create websites for clients. Any help would be appreciated.
Dreamweaver CS5
Windows 7 - 32bit
3gb RAM
Intel Pentium Dualhttp://pokeplanet.co.uk/html.txt thats the html file
http://pokeplanet.co.uk/css.txt thats the css file
also commenting out the css link in the head seems to fix it =/ -
ICloud load times are extremely slow
Since moving to iCloud my web interface is nearly unusable with iCloud. I also had slow load times with MobileMe to the point I was nearly going to quit using it.
On the iCloud system at times I'll load up the page and the mail will just fail to load. Other times I'll try to search for mail and it will hang up, I'll come back 10-15 minutes later and it will have either quit searching, or still have not found anything.
I'm using the most recent version of Firefox and Windows 7 64 bit.I'm having the same issues, no matter if I use OS X or Windows to check my mail. Searching is virtually useless and keeps me hanging forever. I can't even search for items on my phone any longer - it NEVER seems to find anything that I'm looking for if it's not in my immediate Inbox.
C'mon Apple - this is something Google has been doing for years with Gmail. You've got to fix these nagging issues. -
Long Load Times on Graphic Intensive Games
I'm experiencing some absurdly long load times (1-3 hours) with many games (SPORE, Portal, X:3, etc...) that I believe may be related to how graphically intensive they are. Older games with lower graphics quality (WoW, Civ 4, etc...) load up fine.
When I load any newer game the icon appears in the tray and the computer does nothing else for at least an hour, whereupon the program loads and begins playing immediately--often without any further delays or issues.
I also use Boot Camp to run Windows Vista (Ultimate 32) and experience no delays when running SPORE on Windows.
Below are my specs:
Hardware:
Hardware Overview:
Model Name: iMac
Model Identifier: iMac5,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.33 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 2 GB
Bus Speed: 667 MHz
Boot ROM Version: IM51.0090.B09
SMC Version: 1.9f4
Serial Number: QP7121Q** <Edited by Moderator>
Network:
Bluetooth:
Type: PPP (PPPSerial)
Hardware: Modem
BSD Device Name: Bluetooth-Modem
Has IP Assigned: No
IPv4:
Configuration Method: PPP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: Manual
Exclude Simple Hostnames: 0
FTP Passive Mode: Yes
Auto Discovery Enabled: No
Built-in Ethernet:
Type: Ethernet
Hardware: Ethernet
BSD Device Name: en0
Has IP Assigned: No
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
Proxies:
FTP Proxy Enabled: No
FTP Passive Mode: Yes
Gopher Proxy Enabled: No
HTTP Proxy Enabled: No
HTTPS Proxy Enabled: No
RTSP Proxy Enabled: No
SOCKS Proxy Enabled: No
Ethernet:
MAC Address: 00:17:f2:d4:e8:98
Media Options:
Media Subtype: Auto Select
Built-in FireWire:
Type: FireWire
Hardware: FireWire
BSD Device Name: fw0
Has IP Assigned: No
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: Manual
Exclude Simple Hostnames: 0
FTP Passive Mode: Yes
Auto Discovery Enabled: No
Ethernet:
MAC Address: 00:19:e3:ff:fe:81:ea:7a
Media Options: Full Duplex
Media Subtype: Auto Select
Software:
System Software Overview:
System Version: Mac OS X 10.5.3 (9D34)
Kernel Version: Darwin 9.3.0
Boot Volume: MacintoshHD
Boot Mode: Normal
Computer Name: emeldi
User Name: Mike (mike)
Time since boot: 1 day9:05
ATA:
ATA Bus:
MATSHITADVD-R UJ-85J:
Capacity: 423.4 MB
Model: MATSHITADVD-R UJ-85J
Revision: FCQ5
Serial Number:
Removable Media: Yes
Detachable Drive: No
BSD Name: disk1
Protocol: ATAPI
Unit Number: 0
Socket Type: Internal
Low Power Polling: Yes
Mac OS 9 Drivers: No
Partition Map Type: Unknown
S.M.A.R.T. status: Not Supported
Volumes:
SPORE:
Capacity: 368.7 MB
Media Type: CD-ROM
Writable: No
File System: ISO Rockridge
BSD Name: disk1s0
Mount Point: /Volumes/SPORE
Volumes:
disk1s0:
Capacity: 368.7 MB
Media Type: CD-ROM
Writable: No
File System: ISO Rockridge
Audio (Built In):
Intel High Definition Audio:
Device ID: 0x83847680
Audio ID: 23
Available Devices:
Headphone:
Connection: Combo
Microphone:
Connection: Internal
Speaker:
Connection: Internal
Line In:
Connection: Combo
S/P-DIF Out:
Connection: Combo
S/P-DIF In:
Connection: Combo
Bluetooth:
Apple Bluetooth Software Version: 2.1.0f17
Hardware Settings:
emeldi:
Address: 00-17-f2-be-d3-95
Manufacturer: Cambridge Silicon Radio
Firmware Version: 3.1965 (3.1965)
Bluetooth Power: On
Discoverable: No
Requires Authentication: No
Services:
Bluetooth File Transfer:
Folder other devices can browse: ~/Public
Requires Authentication: Yes
State: Enabled
Bluetooth File Exchange:
Folder for accepted items: ~/Documents
Requires Authentication: No
When other items are accepted: Ask
When PIM items are accepted: Ask
When receiving items: Prompt for each file
State: Enabled
Devices (Paired, Favorites, etc):
JabraBT125:
Name: JabraBT125
Address: 00-1a-45-81-c4-f6
Type: Headset
Services: Headset, Hands-Free unit
Paired: Yes
Favorite: Yes
Connected: No
Manufacturer: Cambridge Silicon Radio ($3, $978)
Incoming Serial Ports:
Serial Port 1:
Name: Bluetooth-PDA-Sync
RFCOMM Channel: 3
Requires Authentication: No
Outgoing Serial Ports:
Serial Port 1:
Address:
Name: Bluetooth-Modem
RFCOMM Channel: 0
Requires Authentication: No
Diagnostics:
Power On Self-Test:
Last Run: 6/22/08 3:50 AM
Result: Passed
Disc Burning:
MATSHITA DVD-R UJ-85J:
Firmware Revision: FCQ5
Interconnect: ATAPI
Burn Support: Yes (Apple Shipping Drive)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +R DL, +RW
Write Strategies: CD-TAO, CD-SAO, DVD-DAO
Media:
Type: CD-ROM
Blank: No
Erasable: No
Overwritable: No
Appendable: No
FireWire:
FireWire Bus:
Maximum Speed: Up to 400 Mb/sec
Graphics/Displays:
ATI Radeon X1600:
Chipset Model: ATY,RadeonX1600
Type: Display
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 256 MB
Vendor: ATI (0x1002)
Device ID: 0x71c5
Revision ID: 0x0000
ROM Revision: 113-xxxxxx-139
EFI Driver Version: 01.00.139
Displays:
iMac:
Display Type: LCD
Resolution: 1680 x 1050
Depth: 32-bit Color
Built-In: Yes
Core Image: Hardware Accelerated
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Display Connector:
Status: No display connected
Memory:
BANK 0/DIMM0:
Size: 1 GB
Type: DDR2 SDRAM
Speed: 667 MHz
Status: OK
Manufacturer: 0x2CFFFFFFFFFFFFFF
Part Number: 0x3136485446313238363448592D3636374433
Serial Number: 0xDB086DDD
BANK 1/DIMM1:
Size: 1 GB
Type: DDR2 SDRAM
Speed: 667 MHz
Status: OK
Manufacturer: 0x2CFFFFFFFFFFFFFF
Part Number: 0x3136485446313238363448592D3636374433
Serial Number: 0xDB086DDC
Power:
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 0
Disk Sleep Timer (Minutes): 0
Display Sleep Timer (Minutes): 15
Sleep On Power Button: Yes
Automatic Restart On Power Loss: Yes
Wake On LAN: Yes
Display Sleep Uses Dim: No
Hardware Configuration:
UPS Installed: No
Printers:
Lexmark All In One:
Status: Idle
Print Server: Local
Driver Version: 1.1.3
Default: Yes
URI: usb://Lexmark/Lexmark%20All%20In%20One?location=1d120000
PPD: Lexmark All In One
PPD File Version: 1.0
PostScript Version: (3011.104) 0
Lexmark All In One-1:
Status: Idle
Print Server: Local
Driver Version: 1.1.3
Default: No
URI: usb://Lexmark/Lexmark%20All%20In%20One?location=3d120000
PPD: Lexmark All In One
PPD File Version: 1.0
PostScript Version: (3011.104) 0
Serial-ATA:
Intel ICH7-M AHCI:
Vendor: Intel
Product: ICH7-M AHCI
Speed: 1.5 Gigabit
Description: AHCI Version 1.10 Supported
WDC WD2500JS-40TGB0:
Capacity: 232.89 GB
Model: WDC WD2500JS-40TGB0
Revision: 20.06C04
Serial Number: WD-WCANY2508218
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Mac OS 9 Drivers: No
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
MacintoshHD:
Capacity: 232.57 GB
Available: 11.26 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s2
Mount Point: /
Volumes:
disk0s2:
Capacity: 232.57 GB
Available: 11.26 GB
Writable: Yes
File System: Journaled HFS+
USB:
USB High-Speed Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBEHCI
PCI Device ID: 0x27cc
PCI Revision ID: 0x0002
PCI Vendor ID: 0x8086
Bus Number: 0xfd
Built-in iSight:
Version: 1.84
Bus Power (mA): 500
Speed: Up to 480 Mb/sec
Manufacturer: Micron
Product ID: 0x8501
Vendor ID: 0x05ac (Apple Computer, Inc.)
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBUHCI
PCI Device ID: 0x27c9
PCI Revision ID: 0x0002
PCI Vendor ID: 0x8086
Bus Number: 0x3d
USB Hub:
Version: 1.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: OEM
Product ID: 0x0061
Vendor ID: 0x043d
Lexmark All-in-One:
Version: 1.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Lexmark
Product ID: 0x0069
Vendor ID: 0x043d
All-in-One:
Version: 1.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Lexmark
Product ID: 0x0060
Vendor ID: 0x043d
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBUHCI
PCI Device ID: 0x27ca
PCI Revision ID: 0x0002
PCI Vendor ID: 0x8086
Bus Number: 0x5d
USB Multimedia Keyboard:
Version: 1.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: ALCOR
Product ID: 0x9462
Serial Number: Au9462
Vendor ID: 0x058f
USB RECEIVER:
Version: 25.10
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Logitech
Product ID: 0xc50e
Vendor ID: 0x046d
USB Multimedia Keyboard:
Version: 1.22
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: ALCOR
Product ID: 0x9410
Serial Number: Au9462
Vendor ID: 0x058f
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBUHCI
PCI Device ID: 0x27c8
PCI Revision ID: 0x0002
PCI Vendor ID: 0x8086
Bus Number: 0x1d
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBUHCI
PCI Device ID: 0x27cb
PCI Revision ID: 0x0002
PCI Vendor ID: 0x8086
Bus Number: 0x7d
Bluetooth USB Host Controller:
Version: 19.65
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Apple, Inc.
Product ID: 0x8206
Vendor ID: 0x05ac (Apple Computer, Inc.)
IR Receiver:
Version: 1.10
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Apple Computer, Inc.
Product ID: 0x8240
Vendor ID: 0x05ac (Apple Computer, Inc.)
AirPort Card:
AirPort Card Information:
Wireless Card Type: AirPort Extreme (0x14E4, 0x87)
Wireless Card Locale: USA
Wireless Card Firmware Version: Broadcom BCM43xx 1.0 (4.170.46.7)
Current Wireless Network: ACTIONTEC
Wireless Channel: 9
Firewall:
Firewall Settings:
Mode: Limit incoming connections to specific services and applications
Services:
File Sharing (AFP): Allow all connections
Printer Sharing: Allow all connections
Applications:
com.apple.iChat: Allow all connections
com.apple.ODSAgent: Allow all connections
com.aspyr.empireatwar: Block all connections
com.RealNetworks.RealPlayer: Allow all connections
Locations:
Automatic:
Active Location: Yes
Services:
Bluetooth:
Type: PPP
IPv4:
Configuration Method: PPP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: 2
Exclude Simple Hostnames: No
FTP Passive Mode: Yes
Auto Discovery Enabled: No
PPP:
ACSP Enabled: No
Display Terminal Window: No
Redial Count: 1
Redial Enabled: Yes
Redial Interval: 5
Use Terminal Script: No
Dial On Demand: No
Disconnect On Fast User Switch: Yes
Disconnect On Idle: Yes
Disconnect On Idle Time: 600
Disconnect On Logout: Yes
Disconnect On Sleep: Yes
Idle Reminder: No
Idle Reminder Time: 1800
IPCP Compression VJ: Yes
LCP Echo Enabled: No
LCP Echo Failure: 4
LCP Echo Interval: 10
Log File: /var/log/ppp.log
Verbose Logging: No
Built-in Ethernet:
Type: Ethernet
BSD Device Name: en0
Hardware (MAC) Address: 00:17:f2:d4:e8:98
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
FTP Proxy Enabled: No
FTP Passive Mode: Yes
Gopher Proxy Enabled: No
HTTP Proxy Enabled: No
HTTPS Proxy Enabled: No
RTSP Proxy Enabled: No
SOCKS Proxy Enabled: No
Built-in FireWire:
Type: FireWire
BSD Device Name: fw0
Hardware (MAC) Address: 00:19:e3:ff:fe:81:ea:7a
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
Exclude Simple Hostnames: No
FTP Passive Mode: Yes
Auto Discovery Enabled: No
AirPort:
Type: IEEE80211
BSD Device Name: en1
Hardware (MAC) Address: 00:19:e3:df:5e:9b
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
Exclude Simple Hostnames: No
FTP Passive Mode: Yes
Auto Discovery Enabled: No
IEEE80211:
Allow Net Creation: Yes
Disconnect On Logout: No
InterferenceRobustness: 0
Join Mode: Automatic
JoinModeFallback: Prompt
MAC Address: 00:19:e3:df:5e:9b
PowerEnabled: 1
PreferredNetworks:
SecurityType: Open
SSID_STR: ACTIONTEC
Unique Network ID: F0FA7942-54E7-409B-A1CA-10B05F3B2EDE
SecurityType: WPA2 Personal
SSID_STR: D Pad
Unique Network ID: A391D57D-A4EC-4B2E-B741-0D6569BD77AB
Unique Password ID: 404D3742-17AA-4C24-A229-7E37725522EA
SecurityType: Open
SSID_STR: linksys
Unique Network ID: FD2A5229-348A-4E90-B4E2-48E4DE62C394
SecurityType: Open
SSID_STR: M and M
Unique Network ID: D980D42A-E76C-4A68-920D-AAC9537C26C9
SecurityType: Open
SSID_STR: default
Unique Network ID: 5A2D9117-3263-46B9-952D-A4463BA5F377
SecurityType: Open
SSID_STR: Sweet Lou's **** Shack
Unique Network ID: FA247542-1EF4-41B6-A242-688E75C85B57
RememberRecentNetworks: 1
Ethernet Adaptor (en2):
Type: Ethernet
BSD Device Name: en2
Hardware (MAC) Address: 00:01:23:45:67:89
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Exceptions List: *.local, 169.254/16
FTP Passive Mode: Yes
Ethernet Adaptor (en3):
Type: Ethernet
BSD Device Name: en3
Hardware (MAC) Address: 00:10:32:54:76:98
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Exceptions List: *.local, 169.254/16
FTP Passive Mode: Yes
Volumes:
net:
Type: autofs
Mount Point: /net
Mounted From: map -hosts
Automounted: Yes
home:
Type: autofs
Mount Point: /home
Mounted From: map auto_home
Automounted: Yes
Universal Access:
Universal Access Information:
Cursor Magnification: Off
Display: Black on White
Flash Screen: Off
Mouse Keys: Off
Slow Keys: Off
Sticky Keys: Off
VoiceOver: Off
Zoom: OffThat's old info for the HDD space--I've purchased an external, so my main drive stays plenty free, now.
-
Hey all.
I would just like a bit of input regarding the Itunes load times? How long on average does it seem to take from when you first click on the itunes icon, until it pops up? Because it seems to take quite a bit longer than my other media players, and I was just wondering if I am facing an issue.You have posted in the Mac forum, you will probably find more help in the Windows forum.
-
Long loading time if no internet connection available (VS 2005 Redist)
Hallo forum members!
I've been searching for a solution for my problem for a while - without success. It isn't really a critical issue, but quite annoying anyways.
Here's the problem i'm dealing with: I've developed an .NET application using Visual Studio 2005 and the included Crystal Report classes. When deploying my module everything works as expected, offering a decent performance when loading the Crystal Report assemblies provided by the redistributable package - if an internet connection is available. If the system doesn't offer such a connection (e.g. not properly configured proxy settings) the module takes a huge amount of time to be loaded. An examination (using ProcMon) leaded to the conclusion that the Crystal Report assemblies try to retrieve the system connection settings from the registry in order to establish a connection to the internet. This is done only once when loading for the first time.
Has anyone experienced the same problem? What is this connection used for? Is there a way to suppress this behaviour on systems without a valid internet connection in order to avoid this annoying long loading time?
Thanks on advance for your help.
Greetings,
L.F.Nothing like a good vacation. And I got your christmas present early :). While you were away we (actually one other customer) figured it out. I have written a note re. the resolution that was supposed to be published yesterday, but it's still not out there, so here it is as I submitted it:
Symptom
When a report is loaded is takes between 150 - 180 seconds to display
This is only reproducible on computers with no internet connection
There are no error messages and the report comes up eventually
Reproducing the Issue
Create a Windows application with the following function calls:
new Report()
report.SetDataSource(dataSet)
The function SetDataSource takes 2 plus minutes to execute
Cause
On SetDataSource() an attempt is made to connect to crl.verisign.com
SetDataSource() uses the framework and as per the Microsoft Knowledge Base specified under "Resolution", it is actually the framework that is attempting the connection
Resolution
Solution is described in this Microsoft Knowlege Base:
http://support.microsoft.com/kb/936707
The following Microsoft article also discusses the issue:
http://msdn.microsoft.com/en-us/library/bb629393.aspx
An alternative workaround to the above is as follows:
Open IE and go to the Tools menu and select Internet Options...
Go to the Advanced tab
Find the Security heading
Under the Security heading find "Check for publisher's certificate revocation"
Uncheck this option
Keywords
long time load crl.verisign.com certificate revoked internet
The note will be published here:
https://www.sdn.sap.com/irj/sdn/businessobjects-notes
and the number will be 1270414
Ludek -
Can't open new message window or reply window in mail
I just started having issues where I cannot open a new message window or a reply window. I also cannot open a new Note or To Do. I restarted, zapped the pram (8 times), and was going to trash the plist but couldn't find it. Does anyone know if there is a plist for mail. Any other suggestions would be welcome.
Hi ulua & welcome to discussions...
Try this - find the /Library/Preferences folder in your user/Home folder and then locate and delete this file:
com.apple.mail.plist
*Caution* - doing this may clear your account settings so be sure to note those first in the event you are required to reconfigure, etc. -
Can't open reply window on Mail 2.1.3
I can't get the reply window to open. And I can't get the spell check to work either. I have not used Mail for a very long time - I had been using Entourage. I recently decide to move to Mail and I imported from Entourage OK, but it's very flaky and I can't even write a new mail - I can bang on the keys until I'm blue in the face and nothing shows up in the body of the email. I've tried removing Mail from the "cache" and Envelope from "Mail" and rebooting without success. I have another ibook and everything works on it OK. Should I move any files from that computer to this one? Or ???
Thanks Mulder for your response. I have been very busy and am just getting back to this problem. (I updated my profile to reflect my true OS as 10.4.11).
I did as you suggested and ran repair permissions, however that did not solve the problem. I did notice that one of my partitions gave an error message that it could not unmount it. This partition has system 9 stuff in it, however I have not used anything in that partition for a long time. I use it mostly for storage now and as for as I know there is nothing running in there that would stop it from unmounting, unless it's some Classic functions that come on at startup.
Anyway, I have a second identical machine and system and Mail works fine there, so I replaced my Mail application with the one from the working machine, but that didn't solve anything either. I think that tells me that there are other files I need to also replace with working ones but I don't know which ones they might be.
One of the interesting things is that I can't compose or reply to an email but it will let me forward. strange.
If you have anymore thoughts I would greatly appreciate it. Thanks again.
macForever -
Mail won't open reply window & can't type since upgrading to 10.4.6
like the subject says, ever since I updated my OS to 10.4.6, Mail won't open a reply window when trying to reply to a received e-mail. Also, when trying to type a new email message, can only type until the space bar is hit, then get the error sound and no more characters can be typed. Tried repairing/verifying disk permissions several times and checked disk as well, but still won't work properly. Mozilla mail works without any problem, so it must be a Mac Mail thing...
thanks for any ideas...maybe this stuff needs to be tested better before OS updates are put out...will this and all of us be abandoned to Intel MacOS in the near future?Most people having this issue have successfully solved it cleaning up the LaunchServices cache. The following article describes how to manually reset LaunchServices. The notes at the bottom of the article also provide information about the side effects of deleting each of the files involved.
Resetting Launch Services
The following article also describes the side effects of cache cleaning:
Side effects of System cache cleaning
The following article provides links to some utilities that can be used for troubleshooting and cache cleaning:
Resolving Disk, Permission, and Cache Corruption
It seems that the most appropriate utility for solving this particular problem is Tiger Cache Cleaner.
In addition to the utilities mentioned above, you may also consider OnyX, if for no other reason, because it's free. If you want to try OnyX, after installing it, do this (be sure to read the articles about the side effects of cache cleaning first):
1. Quit all applications.
2. Launch OnyX and enter your administrator password.
3. Click Maintenance. In the Reset section, check LaunchServices database.
4. You may uncheck any other pre-checked options if you've already done them using other utilities.
5. Click the Execute button.
If that doesn't solve the problem, you may try again checking the Links between documents and applications option in step 3 instead.
Please let me know whether you were able to solve the problem, what worked for you and what didn't. -
Optimization on Load Time (Large Images and Sounds)
Hi,
I have an all flash website that works by having each portion of it to load and unload in the center of a frame based off the navigation chosen. Load times on everything but one part of my site are ok.
The dimensions of the part inside the frame are 968x674. I know that's relatively large for a flash file, but that can't be changed at this point.
Within the page there are objects that come up when you find an item on the screen. Its a dialog box and it shows text, an image, and has a voice over that reads what the text says. After you're done looking at it, there is an x-button to dismiss the window. There are 15 of these and they are exported to the actionscript. I add them in the actionscript via addChild. I figured this is a huge spot that could be reconfigured, but I'm not sure if it would make much a difference.
The other huge thing is there is a ton on the screen. It starts you off in an environment, and when you click 3 different sections, it zooms into that portion allowing you to look for the items you're trying to find.
There is also a man that talks and animates in the beginning and at the end. We are planning on taking out the end part and putting a text box up.
Here is the website.. its a propane safety site for kids. I know its kind of a weird idea, but it works and people seem to like it.
www.propanekids.com
The two parts of the site we are trying to optimize is the main menu when you first are at the site, and the "Explore" section. (Just click on the cloud on the front page.
If someone could take the time to give me some new ideas of how I can get these loading times down, I would greatly appreciate it!
ThanksOk, who ever posted this message is hacking me and i can't believe you guys are helping
Date: Thu, 27 Jan 2011 11:07:28 -0700
From: [email protected]
To: [email protected]
Subject: Optimization on Load Time (Large Images and Sounds)
Hi,
I have an all flash website that works by having each portion of it to load and unload in the center of a frame based off the navigation chosen. Load times on everything but one part of my site are ok.
The dimensions of the part inside the frame are 968x674. I know that's relatively large for a flash file, but that can't be changed at this point.
Within the page there are objects that come up when you find an item on the screen. Its a dialog box and it shows text, an image, and has a voice over that reads what the text says. After you're done looking at it, there is an x-button to dismiss the window. There are 15 of these and they are exported to the actionscript. I add them in the actionscript via addChild. I figured this is a huge spot that could be reconfigured, but I'm not sure if it would make much a difference.
The other huge thing is there is a ton on the screen. It starts you off in an environment, and when you click 3 different sections, it zooms into that portion allowing you to look for the items you're trying to find.
There is also a man that talks and animates in the beginning and at the end. We are planning on taking out the end part and putting a text box up.
Here is the website.. its a propane safety site for kids. I know its kind of a weird idea, but it works and people seem to like it.
http://www.propanekids.com
The two parts of the site we are trying to optimize is the main menu when you first are at the site, and the "Explore" section. (Just click on the cloud on the front page.
If someone could take the time to give me some new ideas of how I can get these loading times down, I would greatly appreciate it!
Thanks
>
Maybe you are looking for
-
I am trying to find the smallest number of iterations required to produce a value to a client defined precision. I have working code with a brute force solution, but need to optimise for when high precision required. What is best algorithm for this?
-
Reg:: SharePoint Team site Access notification mails
Hi Techys, I'm new to SharePoint 2013, I have an issue with SP-2013 team site. If I dont have the access to browse the site ot will ask the "Why i need access". In that case if i enter my purpose of the site access and click on Send Request button. S
-
Itunes 12 on Windows 7, how to open an audio stream
Hello, I'm trying to open an audio stream on Windows 7 / Itunes 12, and I am not able to find the File->Open stream function (does it exist in Windows?), nor to copy paste a webradio to a playlist and edit its url. Anyone able to help? Thanks
-
Connection Refused, HELP
Hi all, I am trying to write a very basic server, and at the moment I havent even assigned it anything to do, as I cant even get the thing to start up. Whenever I try and run it I get the following error: Server access denied (java.net.SocketPermissi
-
Cannot set up Gmail in new verizon iphone
This is my first time using an iphone and I'm a little lost. I need to set up my gmail on my new iphone. I've already checked my mail account, and I do have imap/pop forwarding enabled. I go to mail, Gmail, enter my info, and it tells me that my user