Load Times
I am installing Adobe Creative Cloud enterprise in a virtual lab environment. This lab basically reverts back to a pre-defined state during reboot - all user profiles are deleted. When a user logs in and starts Photoshop for the first time, it takes up to 30 seconds to load. If the user opens photoshop again while still logged in, it opens in about 2 seconds. How can I speed photoshop up so it loads quickly the first time when a user launches it? Are there settings in the user profile that I can copy to other users? Is there something I can disable on the first load? etc. I tried copying some of the profile settings to the default profile, but that only reduces the launch time to about 10 seconds. InDesign is another example. Using Windows 7 x64, 8GB RAM machines. No other special software installed except office 2013. Thanks.
Probably nothing you can do. It's likely not PS itself, its the licensing stuff and the updaters, which naturally will have a hard time in a VM that prevents them from accessing certain things. Or in short: You are forcing them into quirks mode and it may take forever until they have established their port connections after a million failed attempts.
Mylenium
Similar Messages
-
I just updated my RAM (replaced the two 2 gig cards with two Corsair 8 gig cards) and I keep getting a crash report. I have a 21.5 Inch mid 2010 imac. I also am experiencing slow load times with Photoshop and when I try to open Final Cut it says that quartz extreme is not compatible and that I have no VRAM even though I do.
Here is the crash report:
Interval Since Last Panic Report: 5426204 sec
Panics Since Last Report: 2
Anonymous UUID: 2DD57DDB-BB42-5614-395A-CA6225BDAFD9
Wed Mar 20 11:36:53 2013
panic(cpu 0 caller 0xffffff801aa43d8e): "a freed zone element has been modified in zone: maps"@/SourceCache/xnu/xnu-2050.18.24/osfmk/kern/zalloc.c:219
Backtrace (CPU 0), Frame : Return Address
0xffffff81eb0eb950 : 0xffffff801aa1d626
0xffffff81eb0eb9c0 : 0xffffff801aa43d8e
0xffffff81eb0eba00 : 0xffffff801aa435d2
0xffffff81eb0ebae0 : 0xffffff801aa663f7
0xffffff81eb0ebb20 : 0xffffff801aa67398
0xffffff81eb0ebc70 : 0xffffff801aa6887c
0xffffff81eb0ebd20 : 0xffffff801ad5b8fe
0xffffff81eb0ebf50 : 0xffffff801ade182a
0xffffff81eb0ebfb0 : 0xffffff801aaced33
BSD process name corresponding to current thread: launchd
Mac OS version:
Not yet set
Kernel version:
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
Kernel slide: 0x000000001a800000
Kernel text base: 0xffffff801aa00000
System model name: iMac11,2 (Mac-F2238AC8)
System uptime in nanoseconds: 1070542822
last loaded kext at 707348380: com.apple.driver.AppleIRController 320.15 (addr 0xffffff7f9c53e000, size 28672)
loaded kexts:
at.obdev.nke.LittleSnitch 3908
com.apple.driver.AppleIRController 320.15
com.apple.driver.AppleUSBCardReader 3.1.0
com.apple.driver.AppleFileSystemDriver 3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.iokit.SCSITaskUserClient 3.5.1
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.2.2
com.apple.driver.AppleUSBHub 5.2.5
com.apple.driver.AppleFWOHCI 4.9.6
com.apple.driver.AirPort.Atheros40 600.70.23
com.apple.driver.AppleUSBEHCI 5.4.0
com.apple.driver.AppleAHCIPort 2.4.1
com.apple.iokit.AppleBCM5701Ethernet 3.2.5b3
com.apple.driver.AppleUSBUHCI 5.2.5
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleACPIButtons 1.6
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.6
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.iokit.IOUSBHIDDriver 5.2.5
com.apple.iokit.IOSCSIBlockCommandsDevice 3.5.1
com.apple.iokit.IOUSBMassStorageClass 3.5.0
com.apple.driver.AppleUSBMergeNub 5.2.5
com.apple.driver.AppleUSBComposite 5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.1
com.apple.iokit.IOUSBUserClient 5.2.5
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IO80211Family 500.15
com.apple.iokit.IOAHCIFamily 2.2.1
com.apple.iokit.IOEthernetAVBController 1.0.2b1
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOUSBFamily 5.4.0
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.8.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 344
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.21
com.apple.driver.AppleACPIPlatform 1.6
com.apple.iokit.IOPCIFamily 2.7.2
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
Model: iMac11,2, BootROM IM112.0057.B00, 2 processors, Intel Core i3, 3.2 GHz, 16 GB, SMC 1.64f5
Graphics: ATI Radeon HD 5670, ATI Radeon HD 5670, PCIe, 512 MB
Memory Module: BANK 0/DIMM1, 8 GB, DDR3, 1333 MHz, 0x029E, 0x434D5341384758334D314131333333433920
Memory Module: BANK 1/DIMM1, 8 GB, DDR3, 1333 MHz, 0x029E, 0x434D5341384758334D314131333333433920
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.70.23-P2P
Bluetooth: Version 4.0.9f33 10885, 2 service, 18 devices, 0 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: ST31000528AS, 1 TB
Serial ATA Device: HL-DT-STDVDRW GA32N
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 4
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd110000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 6
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa120000 / 3There have been a few reports on here where Corsair RAM seems to have caused users a lot of grief with crashes.
The recommendation on here, mostly, is to only buy RAM from macsales.com or crucial.com as they guarantee their modules will work and offer a no quibble lifetime guarantee.
I'd put the original RAM back in, return the Corsair chips for a refund and re-order from one of those two companies.
http://eshop.macsales.com/shop/apple/memory/iMac
http://www.crucial.com/ -
Can a BIG form be served up one page at a time to avoid long load time?
Tricks I have read for optimizing the load time of large forms are not helping. Linearization causes the first page to render quickly, but you can't interact with the fields until the whole form finishes loading -- no help there. Is there a way to break the form into pages (without creating entirely separate forms) so the user can fill out a page, hit a Next Page button, fill out that page, etc.? Understood that this is an old school idea, but until Reader can download a 1+ MB form in less time than it takes an average user to get ticked off, old school might do the trick.
Alternatively, is there a way to construct a form so you can start interacting with it without having to wait for it all to load? This question comes from the (uninformed) assumption that maybe there are forward references that can't be satisfied until all the bits have come over the wire. If that's right, can a multipage form be architected so as to avoid this problem?No that technology does not exist yet. There are form level events that need to have the entire document there before they can fire. Also you would have to keep track of where you are so that would mean some sort of session information for each user.
-
Iceland site - load times ok?
Here is a site from our trip to Iceland. Are the image and movie load times ok?
http://web.mac.com/volination/iWeb/
Of course, any design suggestions welcome. Thanks.
PB G4 1.67 Mac OS X (10.4.2)Thanks.
TomBud, I know the corners look bad on a few shots. Believe me, I was kicking myself when I looked at the video for not being more careful. I tried putting in a matte in the corners, like little triangle pieces, but I think it detracted from the video more than the blemishes. -
Hello, I own a T420i and have been experiencing very slow load times on startup. The "ThinkPad" BIOS screen stays active for roughly 5-10min before continuing like normal. Once operational the computer works fine other then an occasional freeze up (which becomes extremely annoying with a boot time of 10 min).
Thanks for any suggestions.Hi Epitome, welcome to the forums,
do you have any external devices, especiall USB storage, attached to the system when booting? If so please detach them to see if you experience the same problem.
If the system boots normally please exclude the USB devices from the boot order in BIOS; the system may be scanning them for boot information before moving on to start from the main hard drive.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog -
Improving load times in Linux LabVIEW executable
I'm looking for (simple) ways to improve the loading times in a Linux LabVIEW executable. We're using a low performance, low cost CPU board, and loading times are terrible. The CPU is capable of doing everything after the application is loaded, but takes forever to get there.
One of the problems is the size of the executable, that grows everytime you just look at it. Are there ways to create smaller executables? It runs from a Compact Flash card, which is ofcourse much slower than hard disk.
Another problem is a dynamic vi, that is started for every TCP connection that connects to the application. It takes a long time to load, and connecting too fast can even effectively hang up the system. Starting a handler task takes about half a second, up to a few seconds for the first task.
We're using the LabVIEW 7.1 runtime, system is a 300 MHz cyrix SBC, running from a Compact Flash.Dennisvr wrote:
I'm looking for
(simple) ways to improve the loading times in a Linux LabVIEW
executable. We're using a low performance, low cost CPU board, and
loading times are terrible. The CPU is capable of doing everything
after the application is loaded, but takes forever to get there. One
of the problems is the size of the executable, that grows everytime you
just look at it. Are there ways to create smaller executables? It runs
from a Compact Flash card, which is ofcourse much slower than hard disk. Another
problem is a dynamic vi, that is started for every TCP connection that
connects to the application. It takes a long time to load, and
connecting too fast can even effectively hang up the system. Starting a
handler task takes about half a second, up to a few seconds for the
first task. We're using the LabVIEW 7.1 runtime, system is a 300 MHz cyrix SBC, running from a Compact Flash.
I'm
not sure about the first part of your question. LabVIEW is highly
binary and does a lot of memory allocations before even one VI is ready
to be started. So maybe the memory manager is a problem. Another issue
is that the Macintosh like resource file format that is used by LabVIEW to store its VIs etc. results in
lots and lots of individual disk accesses with a rther random like
character inside a single file. So if you can configure the read
caching of your disk to use more memory this may significantly increase
the speed of loading LabVIEW VIs or applications.
And finally spawning VIs through VI server is a rather costly operation
especially on low resoruce systems. A VI is more like an executable in
many ways as far as resource consumption is concerned rather than a
thread. A much better way would be to avoid spawning subVIs altogether
and implement a queued TCP/IP server similar to the Date Time Server
example. It is a little extra work to work with this shift register
architecture but it will not have the issues of long load times for
every new TCP/IP connection coming in.
Rolf Kalbermatter
Message Edited by rolfk on 03-07-2006 06:33 PM
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions -
Hi there -
Is there a good way to improve load times for my pages that have Edge animation? I have a very simple slide show set up, and even with the Preloader script, it's taking many seconds to load the page. Any thoughts?
Thanks!Hi Amy,
Did you try the suggestions in this article?
Edge Animate reduces runtime size by 55%, ‘Save to Custom Folders’ feature, new Preloader options, and more! « Adobe Ed…
animation - Improving Performance in Edge Animate - Graphic Design Stack Exchange
Thanks,
Preran -
Long load times and poor application performance
We have packaged and deployed Adobe CC using SCCM within my school division. It pushed out fine, but now when we attempt to open Photoshop (or any other CC app) it has unusually long load times. 2-4 minutes. It seems to be hanging at the "Reading preferences" stage. After the application appears to have started, it takes an unusually long time to actually start working in the application (it appears to just hang).
Hello There,
EXE's always bundle additional files because it is a stand-alone entity. And, if the size 9GB then it will surely take time to load all the files. I'll check with the team again on how we can optimize it. BTW, are the videos inserted as slide video or Event video?
Thanks,
Vish -
Slow load times on AU sites?
is anyone still experiencing slow load times on AU sites, apparently this is resolved but I just emptied my cache and checked load times on half dozen sites. Still very slow!
I just loaded http://www.prettypollution.com.au/ and it took 17sec.
Got similar time for http://www.designexperts.com.au/ as well. So, although not very fast it's much better than what you’re seeing. Could be something in the node you’re being routed through. -
Dvrcast load times - is HDS a solution?
We are streaming H.264 video to the dvrcast application using RTMP streaming. Everything is working fine, though we are noticing some unacceptable load times when loading large videos for playback that have been recorded this way. I found http://forums.adobe.com/message/3399973#3399973 which offers some suggestions. I will be looking into post-processing the video to defragment it, but I'm also interested in HDS. Is it possible to use HDS with dvrcast streams that were recorded to mp4 via RTMP streaming? I tried the HDS URL convention - http://server/dvrcast_origin/stream_name.f4m but this isn't working. Are there other suggestions for improving load times for long videos with the dvrcast application?
Additionally, I can't seem to get the F4V post processor to work with these files. It is throwing an error "cannot open file" and the -v flag adds no helpful output.
-
I am trying to edit a page and I only have a css page which is local linked to the page. It only affects me when trying to work in split or design view. I hav tried disabling the linked files thing and I have tried this http://kb2.adobe.com/cps/887/cpsid_88742.html also, but I am still getting this long time. It seems to only affect the load time when I have the following in my head tag;
<link rel="stylesheet" type="text/css" href="css/main.css"/>
It also slows the performance drastically, If I type the letter "D" then deleete that letter it will freeze up for a for a short period of time. I can not have this when trying to create websites for clients. Any help would be appreciated.
Dreamweaver CS5
Windows 7 - 32bit
3gb RAM
Intel Pentium Dualhttp://pokeplanet.co.uk/html.txt thats the html file
http://pokeplanet.co.uk/css.txt thats the css file
also commenting out the css link in the head seems to fix it =/ -
Reducing Load Times / Design Architecture
I'm designing a flash site with a Dynamic Gallery (loading images from a XML file). what can I do to reduce load time at the beginning, or limit loading times to individual images?
I've seen designs which loads another SWF file on top of the current one. Is this feasible?
Any details would be greatly appreciated.If loading the images is the goal of the file, then the quickest way to do that is to concentrate on the images. Any way you load them, they have to be loaded. Be sure they are optimized for the web. If the gallery intent would allow for it, have the images loaded on request, using thumbnails or other button-like interfaces. Or maybe load different sections at a time. Or load so many at first, then load the rest in the background so that there's something to look at while the rest load.
I don't know what purpose you have in mind for loading another swf into the file, so I can't offer any ideas there. -
true or false: using pngs (specifically png-8's WITHOUT alpha
transparency,
but with gif-style 1-bit transparency) adds load time to a
page versus a
comparable transparent gif of the same file size.
I have been told this is causing some latency and it doesn't
seem correct to
me. Are there any reliable articles out there that can speak
to this? Anyone
just know?
Alex> true or false: using pngs (specifically png-8's WITHOUT
alpha
> transparency, but with gif-style 1-bit transparency)
adds load time to a
> page versus a comparable transparent gif of the same
file size.
False. Because the PNG file compression algorithm is more
efficient than
the GIF file's simplistic algorithm, an 8-bit PNG image will
always be about
10-15% smaller than the comparable GIF image, and perhaps
more if the image
contains vertical bands or textures. Also, comparing the
render times for
two images, of the identical weight, where one is GIF and the
other is PNG,
would show no difference.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Alexander Ross" <[email protected]> wrote in message
news:firs1e$cju$[email protected]..
> true or false: using pngs (specifically png-8's WITHOUT
alpha
> transparency, but with gif-style 1-bit transparency)
adds load time to a
> page versus a comparable transparent gif of the same
file size.
>
> I have been told this is causing some latency and it
doesn't seem correct
> to me. Are there any reliable articles out there that
can speak to this?
> Anyone just know?
>
> Alex
> -
Data Load Times, etc.
Hello Forums:
I saw this website:
http://www.s-w-h.com/index.php?language=en
And found that a website like this loaded very quickly, and
seemed to fit almost all resolution.
I was wondering how did they make it fit dynamically? And how
did they manage to reduce load times so significantly?
I kinda wondered if it's possible to develop a massive forum
or online community thing using purely Flash. Would that be
possible? What if there were lots of user interaction, can the load
times be significantly cut down?Does it load all the data while connected with 5GHz frequency… What is the IP address that you are getting from the Router? You can check the IP address in the following manner:
If you wish to find out your own IP address, you should run the same ms-dos prompt by clicking Start -> All Programs -> Accessories -> Command Prompt. A black pop up box should come up, type: "ipconfig /all" … There check the IP address and Default Gateway under LAN….
# Open up the browser and on the address bar type “IP address of Default Gateway” that will open up the Router setup page…
# In that page itself make the MTU size to 1400 from Auto….
# Make the following Channel Settings of 2.4 GHz you can make Channel Width to 20 MHz only and Channel to 6, 9, 11.. Click Save Settings...
Then check the connectivity… -
Hi all,
Anyone here knows if we can simulate load time in BW?
Example, i have a DSO that goes to a Cube for reporting.
I would like to simulate how long 100,000 records will take to get from ECC to the Cube.
I might later want to test how long 250,00 records will take.
RSA3 is not useful as it can only test how fast the extractor will take.
Is such as thing possible?Hi Ganesan,
1) for DSO to Cube Loading: You have to create a DTP.
Execute the DTP with Debugging mode (simulation).
Then in the monitor you can find the time taken.
2) for Loading from ECC to BI : You have to create Info package.
But info package does not give any option for simulation.
cheers. -
Comparing load times w/ and w/o BIA
We are looking at the pros/cons of BIA for implementation. Does anyone have data to show a comparison between loads, loads with compression, vs BIA Index time?
Haven't seen numbers comparing load times. Loads to your cubes and compression continue whether you have BIA or not. Rollup time would be eliminated as you would no longer have the need to have aggregates. No aggregates should also reduce Change Run time, perhaps a lot, or only a little, depending on whether you have large aggregates with Nav Attrs in them. All of that is offset to some degree by the time to update the BIA.
Make sure you understand all the licensing costs, not just SAP's, but the hardware vendors per blade licensing costs. Talked to someone just the other day that was not expecting a per blade licensing, list price of the license per blade was $75,000
Maybe you are looking for
-
I just down loaded my software for the vz usb 720 modem on a new windows 8.1 computer and it says it is connected but the internet won't come on. It says firewall settings my have to be changed (921) Has anyone had this problem and is there a softwar
-
i updated my itunes then i couldn't sync my iphone anymore, it shows me that i didn't connect my iphone to my computer, can i know why i can't sync my iphone??? should i reinstall the older version of itunes???
-
Hi BW gurus, I'm trying to understand the code given in "How to extend master data to include SSN from R/3 HR" paper This is the part of of the exit routine to extend 0person_attr datasource... As I'm new to ABAP , I 'm having following questions ...
-
Can I read the SYS_CONTEXT in REPORTS from Forms ?
Hi, in a Forms module I set with a stored procedure a SYS_CONTEXT. This module calls a Report included a 'get' SYS_CONTEXT function but without getting this context. I hoped to transfer a where clause from Forms to Reports in the SYS_CONTEXT and cann
-
Is there a way to add pictures for texting?
On many phones there is a way you can have a picture show up when you're texting them? Is there anyway to add that feather with the iPhone?