Load to Info cube - Error
I am trying to load from DSO to an Info cube. The records doesnt have error and but the process always gets terminated and gives the follwoing message:
Error while updating to target ZPU_C01 (type INFOCUBE)
Processing Terminated
Its not able to create "Error DTP" as well since there are no errors.
Any suggestions?
Hi.......
Hav u Debug the request..........In the DTP Monitor............click on Debugging in the top.............
How is system performance..............Check Short dumps in ST22..............and System Log in SM21..........
Regards,
Debjani.........
Similar Messages
-
I need format for data in excel file load into info cube to planning area.
Hi gurus,
I need format for data in excel file load into info cube to planning area.
can you send me what should i maintain header
i have knowledge on like
plant,location,customer,product,history qty,calander
100,delhi,suresh,nokia,250,2011211
if it is right or wrong can u explain and send me about excel file format.
babuHi Babu,
The file format should be same as you want to upload. The sequence of File format should be same communication structure.
Like,
Initial columns with Characteristics (ex: plant,location,customer,product)
date column (check for data format) (ex: calander)
Last columsn with Key figures (history qty)
Hope this helps.
Regards,
Nawanit -
Data is not loaded into info cube
Hi All,
I have a custom defined info cube and full load is running every month and It's hardly taking 1 hour to finish the same.
But this month data came to PSA successfully from there to data target process stopped at update rules, non of the records are getting added to info cube. We haven't done any changes on update rules also.
Can anybody let me know what might be the reason behind it. Thanks.
Regards,
Ashok
Message was edited by: Ashok kaipuHi Ashok,
You can do the following:
1. In the Monitor Status tab, turn the request Red.
2. In the Details tab right click this data package and choose Manual Update.
3. After the processing is done, the datapackage will be green but the overall request will still be red.
4. In the Monitor Status tab, turn the request back to original status (this will make it green)
Hope this helps... -
Flat File: no data load into Info Cube
Hi there,
i try to load a flat file. When I simulate the upload its works well. But no Data was load in my Info Cube. When I try define a query there are no available.
Can someone provide me with a solution for this problem?
With rgds
Oktay DemirHi Oktay,
in addition to A.H.P.'s marks, check if
- Data is posted not only into PSA but also into datatarget,
- updaterules are active.
- Check Monitor-Status in Cube-Administration
- Check availabilitiy for reporting of the request wthin Cube-Administration.
Cheers
Sven -
Loading in Info Cube takes huge time
Hi,
We are loading transactional data in the info cube ZFI_C01 from a DSO ZFI_O05
We loaded around 1.8 million records ( 1776444 ) through a request in the DSO ZFI_O05 that took around 13 minutes including activation of that request.( Note that flag for SIDs Generation upon Activation was checked and so, SIDs were generated for all the characteristics in the DSO during activation )
When we loaded the same request to the cube ZFI_C01, the request took around 3 hours to finish.
I did RSRV Checks for the infocube ZFI_C01 to find out the ratio between fact table and dimension tables.
( goto RSRV->all elementary test->database->database info abt infoprovider table->give the cube name ..check the log it gives the ratio between fact table and dim table... )
I got the following results for the two of the dimensions that are involved in the cube:
Table /BIC/DZFI_C013 has 1564356 entries; size corresponds to 86% of the InfoCube
Table /BIC/DZFI_C012 has 1649990 entries; size corresponds to 91% of the InfoCube
When I checked the properties for both these dimensions, the checkbox "High Cardinality" and "Line Item Dimensions" were unchecked.
I can not check the checkbox "Line item Dimension" as both these dimensions are having more than one info characteristics.
Shall I check "High Cardinality" checkbox and retry loading as ratio of the dimension table to fact table size is more than 20%.
But I am bit unclear what impact it will have on reportinHi there,
Check if you have any routines with code (start routine, end routine, etc.) that can have huge load performance.
Also check in sm50 when you do the load to the InfoCube if you're having several reads to the table NRIV and/or to some specific dimension tables. If so, find out what are the entries for buffer number range to those dimension tables, and after repeat the load (cancel it meanwhile) to the infocube, go to transaction SNRO and keep in buffer range 500 of sixe to those buffer number range. Repeat the load.
Try to see if it hepls,
Diogo. -
Hi Gurus,
I am trying to load a cube <b>0fiar_c03</b> using delta mechanism. In the infopackage i have given as initialize delta process and while i tried to delta in extraction mode it is saying that delta mechanism is not possible and please use full update. Whether delta load is possible in this cube or should i follow some other procedure for delta load.
Regards,
Raghavendra.Sanity check the datasource you are using is DELTA capable itself.
After that ,create IP as INIT to load data from ECC to PSA
create DTP - DELTA to load from PSA to Infocube (no need of creating INIT DTP)..
http://help.sap.com/saphelp_nw70/helpdata/en/79/0d163c240a9440e10000000a114084/frameset.htm
Hope it Helps
Chetan
@CP.. -
Delta records are not loading from DSO to info cube
My query is about delta loading from DSO to info cube. (Filter used in selection)
Delta records are not loading from DSO to Info cube. I have tried all options available in DTP but no luck.
Selected "Change log" and "Get one request only" and run the DTP, but 0 records got updated in info cube
Selected "Change log" and "Get all new data request by request", but again 0 records got updated
Selected "Change log" and "Only get the delta once", in that case all delta records loaded to info cube as it was in DSO and gave error message "Lock Table Overflow" .
When I run full load using same filter, data is loading from DSO to info cube.
Can anyone please help me on this to get delta records from DSO to info cube?
Thanks,
ShammaData is loading in case of full load with the same filter, so I don't think filter is an issue.
When I follow below sequence, I get lock table overflow error;
1. Full load with active table with or without archive
2. Then with the same setting if I run init, the final status remains yellow and when I change the status to green manually, it gives lock table overflow error.
When I chnage the settings of DTP to init run;
1. Select change log and get only one request, and run the init, It is successfully completed with green status
2. But when I run the same DTP for delta records, it does not load any data.
Please help me to resolve this issue. -
Error 3, when loading transaction data into an info cube from flat file
HI friends,
I have taken 2 dimension info cube. (customer and product dimensions).I loaded master data through direct update by preparing 2 excel sheets seperately for customer and product. For loading transaction data(through flexible update), I prepared single excel sheet covering all values that is master data info objects of customer and product, key figure values and taken 0unit, 0currency,0calday in transfer rules.(in excel sheet)
Once I load the data, the "data was requested" option is appearing and error 3 coming, when I go for monitor to check the data.
saiHi Ram,
In Monitor see the error message by clicking on Error message button or
go to details tab and expand the nodes to see which record is having problem.
Regards,
Prakash -
Error in Uploading the data in Info Cube
Hi,
We are implementing SCM 5.0 APO and ECC 6.0 in UK/I client.
At the moment we are facing one problem in uploading the Excel file into Info Cube.which was working perfectly earlier.
Through analysis, we come to know that data flows thru PSA. but when we try to push that data from PSA manually system gives following error message;
Runtime Errors UNCAUGHT_EXCEPTION
Except. CX_RSR_X_MESSAGE
What happened? |
| The exception 'CX_RSR_X_MESSAGE' was raised, but it was not caught anywhere along the call hierarchy.
Since exceptions represent error situations and this error was not
adquately responded to, the running ABAP program 'SAPLRRMS' has to be terminated.
Error analysis
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_RSR_X_MESSAGE', was not caught and therefore caused a runtime error.
The reason for the exception is:
No text available for this exception
Missing Handling of Application Exception Program RSABW_START_NEW
Trigger Location of Exception Program SAPLRRMS
Include LRRMSU13 Row 78
Module type (FUNCTION) Module Name RRMS_X_MESSAGE
if somebody can give advice on this! As we could upload the data earlier perfectly.
Thanks
Regards
Jignesh.Hi Jignesh,
I this the first time you are loading into the cube? Is it the a fresh installation?
The error message doesn't help you much but I would try a couple of things
1. Replicate the datasources in source system, Activate the transfer and update rules and then try to load
2. Try loading only till the PSA and then try to simulate the update to cube. If you are using BI 7.0, then just load the info package, it will load to PSA and unless you run the DTP, it doesnot update the cube.
3. This can also be a GUI issue. Make sure that you have all the GUI files installed. Is it a dump with message "CX_RSR_X_MESSAGE"?
Check the Note 763203 - Termination during InfoCube realignment
Hope this helps. Please donot hesitate to ask more questions. -
Getting error while scheduling load from one cube to another
Hi,
I have create one cube ,which has got loaded from two data sources and load into the cube went successful.I have created copy cube and schedule the load into copy cube from the base cube,where i am getting error message syaing that"New work Area started,terminated the system" and "Core_dump","Rolled-Out session terminated" all the above messages are getting and so many short dumps.I am getting all the above messages.
Even i have change data packet size from 20000 to 5000 and increares dialup process from 2 to 5.But still i am getting same kind of messages.
Please some one can help me out from this issue.Hi,
In which version you are.
If you in 7.0 then have you checked in DTP.
Just logooff from your server, and again relog, and try to load once again.
Let us know status ....
Reg
Pra -
Error while adding an Info Object in an Info Cube
Hi Experts,
I am trying to add one InfoObject to my info cube but I get following error:
"InfoObject GSMBUHR is only allowed as an attribute (not in InfoCubes)"
The Data Type of the InfoObject is TIMS.
The Reference Char. for it is 0TIME
And in other Properties Attribute only is checked.
but its not maintained as an attribute of any InfoObject as I checked in where used list for this InfoObject.
Please let me know to add it in cube.
Regards
Shubh Karanhi,
u will not be able to add an 'attribute only' info object as characteristic in the cube
it can only be added as an attribute in another master data characteristic. so if u still want to include this info object , u need to unchecck 'attribute only' flag.
hope it helps
Regards,
Rathy -
Getting an error while trying to load data into cube
Hello,
I am trying to load data into cube but it gives me following error:
fiscal year variant not expected.
Can someone tell what could be done on fiscal year
Cheers
Jim.Hi,
May be you have not mapped anything to fiscal variant or not included fiscal variant in the cube but you have used fiscal period inside it.
You should load fiscal variant if you wanna use fiscal period.
Map fiscal variant to a constant K4 or from the source if present and then see the result.
Generally it is K4 except for FI-CO cubes .
In the transfer rules, select field '0fiscvarnt' 'Tp' click
Enter K4 for Constant................Save and Activate
Iam sure you'd fix the issue.
Regards,
Ray -
How to Load data in remodeled info provider(Info cube) ?
I have added one key figure in existing cube by using remodeling process.
I changed the transformation rule and reloaded the data but the new key figure is still showing value as 0.
Can anyone please explain complete step by step process of loading data in remodeled info cube.
I am new to SAP BW. please help me to sort out this issue.
thanxHi,
After adding the key figure, use one of the following options to populate data.
1. Constant: To populate constant data for new key figure.
2. User Exit: To populate data from different source.
For replacing the key figure, use the following option to populate data.
Customer Exit: To populate data for the replaced key figure.
There is a very nice Blog on this.
/people/mallikarjuna.reddy7/blog/2007/02/06/remodeling-in-nw-bi-2004s
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/008f9fef-22e4-2a10-d994-a17c55ca06f0
Hope this helps.
-Vikram -
Getting error in PSA while trying to load data in cube
Dear Friends,
I am trying to load data in cube I am getting error in PISA i.e.
Value 'Boroplus Anticream 19Gm Regular Plain ' (hex. '426F726F706C757320416E7469637265616D203139476D2052') of characteristic .
please guide me.
Thanks in Advance.
Best Regards
Rafeeq<i>Value 'Boroplus Anticream 19Gm Regular Plain ' (hex. '426F726F706C757320416E7469637265616D203139476D2052') of characteristic .</i>
Your data is in lowercase.. either change the data to UPPERCASE from source..
or delete the request in cube and edit PSA data from lowecase to UPPER CASE if they are few records only.
or make the infoobject setting lowecase checked,
Regards
Manga(Assign points if it helps!!) -
Error in List cube at info cube
Hi All
While checking data in info cube level using traction listcube and selecting info objects and keyfigure for output and also selecting setting tab under 3 checkboxs while executing the info cube ,we are getting error message line Error reading the data of InfoProvider ZPL_SC01and Message no. DBMAN305 our info provide having the BIA indexes.
Thanks
RameshHi,
this forum is for the SAP BusinessObjects BI Solution architecture. I would suggest you post your question into the SAP BW forum.
regards
Ingo Hilgefort
Maybe you are looking for
-
Validation and F4 help on an application server file path parameter
Hi I have a field on a selection screen called File Path and it is for a download program where the user needs to specify the path for the download (NOT THE ACTUAL FILENAME). I am trying to find a function or method that allows a user to use F4 help
-
Safari crashes repeatedly after Mountain Lion install
I have had Lion installed for a about a year now, problem free after the initial Flash issues were ironed out. Installed Mountain Lion yesterday and have had several Safari crashes today. I thought it might have been Flash-related, so I removed and
-
i have an ipad 2 wifi and i am not really liking the newest software ios 7.1.1 and i would like to know if i would be able to downgrade to ios 7.0.6 because i was eally happy with the version.
-
What exactly does the contrast ratio and response time mean?
Recently I have been browsing for external monitors and I noticed that two of the specifications for monitors are a contrast ratio and response time. What does a contrast ratio mean? What does the response time mean? Is the response time the same as
-
Interactions don't work after publishing
Web object and YouTube interactions seem not to be working after publishing. Neither do buttons that open URLs. I'm running Win7 and have tried with explorer and chrome. I've now found that they are not working for projects that I published a few mon