Load XML content into HTML enabled TextField
I'm trying to figure out how to use html such as <br />
loaded from an XML element into a TextField.. if I use something
like
<desc>my description<br />line 2</desc> I
get 3 nodes instead of one when loading the XML file. If I use
something like <desc>my description<br />line
2</desc> then I get <br /> in the actual text.
Can anyone clue me in as to how to store HTML in an XML
element so I can load the content into a Dynamic TextField with
HTML enabled?
Thanks much!
use the latter in your xml and use the htmlText property of
your html-enabled textfield to display your text.
Similar Messages
-
Error while loading XML files into scott user
Hi All,
I'm new to xml files. I need to load xml files into database through OWB.
I have xml file in my local machine & am trying to load into table PO of Scott. Scott is registered as repository user.
Followed same steps as specified in userguide.
But, when executing the procedure ( in two ways one as just table name, and other as user.table name) it is showing the below error:
Procedure is:(1)--with username.tablename
begin
wb_xml_load(
'<OWBXMLRuntime>'||
'<XMLSource>'||
'<file>&&SAMPLES_DIR.sample1.xml</file>'||
'</XMLSource>'||
'<targets>'||
'<target dateFormat="yyyy.MM.dd">scott.PO</target>'||
'</targets>'||
'</OWBXMLRuntime>'
end;
ERROR at line 1:
ORA-20006: Error occurred while truncating target database object SCOTT.PO.
Base exception: ORA-01031: insufficient privileges
ORA-06512: at "OWBSYS.WB_XML_LOAD_F", line 12
ORA-06512: at "OWBSYS.WB_XML_LOAD", line 4
ORA-06512: at "SCOTT.SAMPLE1", line 3
ORA-06512: at line 1
Procedure is:(2) with out username
begin
wb_xml_load(
'<OWBXMLRuntime>'||
'<XMLSource>'||
'<file>&&SAMPLES_DIR.sample1.xml</file>'||
'</XMLSource>'||
'<targets>'||
'<target dateFormat="yyyy.MM.dd">PO</target>'||
'</targets>'||
'</OWBXMLRuntime>'
end;
ERROR at line 1:
ORA-20006: Error occurred while truncating target database object PO.
Base exception: ORA-00942: table or view does not exist
ORA-06512: at "OWBSYS.WB_XML_LOAD_F", line 12
ORA-06512: at "OWBSYS.WB_XML_LOAD", line 4
ORA-06512: at line 2
xml file:
<ROWSET>
<ROW>
<ID>100</ID>
<ORDER_DATE>2000.12.20</ORDER_DATE>
<SHIPTO_NAME>Adrian Howard</SHIPTO_NAME>
<SHIPTO_STREET>500 Marine World Parkway</SHIPTO_STREET>
<SHIPTO_CITY>Redwood City</SHIPTO_CITY>
<SHIPTO_STATE>CA</SHIPTO_STATE>
<SHIPTO_ZIP>94065</SHIPTO_ZIP>
</ROW>
</ROWSET>
Note: Everything works fine if I create PO table in OWBSYS user and execute the procedurein OWBSYS user. OWBSYS.PO table will be loaded.
What privileges are missing, what shouldI do if I want to execute the procedure from scott user and load the table of scott.
Thanks in advance for the help.
Regards,
JoshnaHi Joshna,
Please follow below steps to load xml file to oracle database.
1.First connect to owb (Design Center) through your repository owner user (ex : REP_OWNER).
2. Import WB_XML_LOAD procedure . and exit to repository owner.
3. connect to owb design center through your repository user (ex : REP_USER)
Create New mapping and drag one Constant Operator and create one attribute, paste / edit following code
'<OWBXMLRuntime>'||
'<XMLSource>'||
'<file>E:\SOURCE\emp.xml</file>'||
'</XMLSource>'||
'<targets>'||
'<target truncateFirst = "FALSE" dateFormat="yyyy.MM.dd">rep_user.emp</target>'||
'</targets>'||
'</OWBXMLRuntime>'
4. Drag pre mapping operator and select WB_XML_LOAD procedure
5. Connect Constant Operator attribute to pre mapping operator.
6. Drag two dummy tables and connect source to target. (ex : drag t1 (table) tab two times and connect.
7. Validate and deploy the mapping.
8. grant necessary grant command to rep_owner user to rep_user user.
(Note : target truncateFirst = "FALSE" by default truncate the table. So you have to give grant privileges
To rep_user , select ,insert, delete privileges.
9. Execute the mapping , and check EMP table. (Note : before loading EMP table delete all records ).
10 . If you want more description please go through the below link
http://download.oracle.com/docs/html/A95931_01/apf.htm
Regards
Venkat -
Best method to load XML data into Oracle
Hi,
I have to load XML data into Oracle tables. I tried using different options and have run into a dead end in each of those. I do not have knowledge of java and hence have restricted myself to PL/SQL solutions. I tried the following options.
1. Using DBMS_XMLSave package : Expects the ROWSET and ROW tags. Connot change format of the incoming XML file (Gives error oracle.xml.sql.OracleXMLSQLException: Start of root element expected).
2. Using the XMLPARSER and XMLDOM PL/SQL APIs : Works fine for small files. Run into memory problems for large files (Gives error java.lang.OutOfMemoryError). Have tried increasing the JAVA_POOL_SIZE but does not work. I am not sure whether I am changing the correct parameter.
I have read that the SAX API does not hog memory resources since it does not build the entire DOM tree structure. But the problem is that it does not have a PL/SQL implementation.
Can anyone PLEASE guide me in the right direction, as to the best way to achieve this through PL/SQL ??? I have not designed the tables so am flexible on using purely relational or object-relational design. Although would prefer to keep a purely relational design. (Had tried used object-relational for 1. and purely relational for 2. above)
The XML files are in the following format, (EXAMINEEs with single DEMOGRAPHIC and multiple TESTs)
<?xml version="1.0"?>
<Root_Element>
<Examinee>
<MACode>A</MACode>
<TestingJID>TN</TestingJID>
<ExamineeID>100001</ExamineeID>
<CreateDate>20020221</CreateDate>
<Demographic>
<InfoDate>20020221</InfoDate>
<FirstTime>1</FirstTime>
<LastName>JANE</LastName>
<FirstName>DOE</FirstName>
<MiddleInitial>C</MiddleInitial>
<LithoNumber>73</LithoNumber>
<StreetAddress>SomeAddress</StreetAddress>
<City>SomeCity</City>
<StateCode>TN</StateCode>
<ZipCode>37000</ZipCode>
<PassStatus>1</PassStatus>
</Demographic>
<Test>
<TestDate>20020221</TestDate>
<TestNbr>1</TestNbr>
<SrlNbr>13773784</SrlNbr>
</Test>
<Test>
<TestDate>20020221</TestDate>
<TestNbr>2</TestNbr>
<SrlNbr>13773784</SrlNbr>
</Test>
</Examinee>
</Root_Element>
Thanks for the help.Please refer to the XSU(XML SQL Utility) or TransX Utility(for Multi-language Document) if you want to load data in XML format into database.
Both of them require special XML formats, please first refer to the following docs:
http://otn.oracle.com/docs/tech/xml/xdk_java/doc_library/Production9i/doc/java/xsu/xsu_userguide.html
http://otn.oracle.com/docs/tech/xml/xdk_java/doc_library/Production9i/doc/java/transx/readme.html
You can use XSLT to transform your document to the required format.
If you document is large, you can use SAX method to insert data into database. But you need to write the code.
The following sample may be useful:
http://otn.oracle.com/tech/xml/xdk_sample/xdksample_040602i.html -
Loading XML file into DB Table
Hi
I m quite new to the loading XML file into database table.
It will be great if anyone could guide me to through.
Now,
i have an XML file which has to be loaded into the DB table.
what are the steps involved in doing this. How do i go from here ??
your help is greatly appriciated ???
Thank you so much!!
-ShashiOK - Although you really should read the XMLDB FAQ on this forum, here is some sample code of ONE of the ways of doing it
(there are multiple ways - and this is not the most simple one)
Based on Oracle 11gR1
-- sqlplus /nolog
clear screen
set termout on
set feed on
set lines 40
set long 10000000
set serveroutput on
set lines 100
set echo on
connect / as sysdba
col filename for a80
col xml for a80
-- Create schema “OTN”
drop user OTN cascade;
purge dba_recyclebin;
create user OTN identified by OTN;
grant dba, xdbadmin to OTN;
EXECUTE dbms_java.grant_permission( 'OTN', 'java.io.FilePermission','G:\OTN\xmlstore','read' );
prompt pause
pause
clear screen
-- Create directory
connect OTN/OTN;
show user
drop directory OTN_USE_CASE;
CREATE directory OTN_USE_CASE AS 'G:\OTN\xmlstore';
SELECT extract((XMLTYPE(bfilename('OTN_USE_CASE','ABANDA-20030407215829881GMT.xml'),NLS_CHARSET_ID('AL32UTF8'))),'*') AS "XML"
from dual;
prompt pause
pause
clear screen
-- Directory Listing - Tom Kyte
create global temporary table DIR_LIST
( filename varchar2(255) )
on commit delete rows
create or replace
and compile java source named "DirList"
as
import java.io.*;
import java.sql.*;
public class DirList
{public static void getList(String directory)
throws SQLException
{ File path = new File( directory );
String[] list = path.list();
String element;
for(int i = 0; i < list.length; i++)
{ element = list;
#sql { INSERT INTO DIR_LIST (FILENAME)
VALUES (:element) };
create or replace procedure get_dir_list( p_directory in varchar2 )
as language java
name 'DirList.getList( java.lang.String )';
prompt pause
pause
clear screen
-- The content of the global temporary table
exec get_dir_list( 'G:\OTN\xmlstore' );
select * from dir_list;
-- "COMMIT" will clear / truncate the global temporary table...
prompt pause
pause
clear screen
-- Combined: Reading XML content from multiple XML files
commit;
exec get_dir_list( 'G:\OTN\xmlstore' );
select * from dir_list where filename like '%.xml'
and rownum <= 10;
prompt pause
pause
clear screen
select extract((XMLTYPE(bfilename('OTN_USE_CASE',dl.filename),NLS_CHARSET_ID('AL32UTF8'))),'*') AS "XML"
from dir_list dl
where dl.filename like '%.xml' and rownum <= 2;
prompt pause
pause
clear screen
-- If you can select it you can insert it...
-- drop table OTN_xml_store purge;
create table OTN_xml_store of xmltype
xmltype store as binary xml
commit;
exec get_dir_list( 'G:\OTN\xmlstore' );
set time on timing on
insert into OTN_xml_store
select XMLTYPE(bfilename('OTN_USE_CASE',dl.filename),NLS_CHARSET_ID('AL32UTF8')) AS "XML"
from dir_list dl
where dl.filename like '%.xml';
set time off timing off
commit;
select count(*) from OTN_xml_store;
prompt pause
pause
clear screen
-- If you can select it you can create resources and files
set time on timing on
commit;
exec get_dir_list( 'G:\OTN\xmlstore' );
select count(*) from dir_list where filename like '%.xml';
set serveroutput on size 10000
DECLARE
XMLdoc XMLType;
res BOOLEAN;
v_foldername varchar2(4000) := '/public/OTN/';
cursor c1
is
select dl.filename FNAME
, XMLTYPE(bfilename('OTN_USE_CASE',dl.filename),NLS_CHARSET_ID('AL32UTF8')) XMLCONTENT
from dir_list dl
where dl.filename like '%.xml'
and rownum <= 100;
BEGIN
-- Create XDB repository Folder
if (dbms_xdb.existsResource(v_foldername))
then
dbms_xdb.deleteResource(v_foldername,dbms_xdb.DELETE_RECURSIVE_FORCE);
end if;
res:=DBMS_XDB.createFolder(v_foldername);
-- Create XML files in the XDB Repository
for r1 in c1
loop
if (DBMS_XDB.CREATERESOURCE(v_foldername||r1.fname, r1.xmlcontent))
then
dbms_output.put_line(v_foldername||r1.fname);
null;
else
dbms_output.put_line('Loop Exception :'||sqlerrm);
end if;
end loop;
EXCEPTION WHEN OTHERS THEN
dbms_output.put_line('Others Exception: '||sqlerrm);
END;
set time off timing off
commit;
prompt pause
pause
clear screen
-- FTP and HTTP
clear screen
prompt
prompt *** FTP - Demo ***
prompt
prompt pause
pause
host ftp
-- open localhost 2100
-- user OTN OTN
-- cd public
-- cd OTN
-- ls
-- bye
clear screen
prompt
prompt *** Microsoft Internet Explorer - Demo ***
prompt
prompt pause
pause
host "C:\Program Files\Internet Explorer\IEXPLORE.EXE" http://OTN:OTN@localhost:8080/public/OTN/
prompt pause
pause
-- Accessing the XDB Repository content via Resource View
-- Selecting content from a resource via XBDUriType
clear screen
prompt set long 300
set long 300
prompt Relative Path - (path)
SELECT path(1) as filename
FROM RESOURCE_VIEW
WHERE under_path(RES, '/public/OTN', 1) = 1
and rownum <= 10
prompt pause
pause
clear screen
prompt Absolute Path - (any_path)
select xdburitype(any_path).getClob() as xml
FROM RESOURCE_VIEW
WHERE under_path(RES, '/public/OTN', 1) = 1
and rownum <= 1;
prompt pause
pause
-- CLEANUP ENVIRONMENT
clear screen
prompt
prompt >>>>> Clean UP !!! <<<<<<
prompt
prompt Cleanup environment and drop user...!!!
prompt
pause
clear screen
conn / as sysdba
alter session set current_schema=OTN;
begin
dbms_xdb.deleteResource('/public/OTN',dbms_xdb.DELETE_RECURSIVE_FORCE);
commit;
end;
alter session set current_schema=sys;
drop user OTN cascade;
Based on http://www.liberidu.com/blog/?p=1053 -
I'cant load SPRY content into a Frame
HOw can i load spry content into a frame.. i wrote a code..
and in the preview version works.. but when i upload to server..
it's not working.. this my code.. thk
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN" "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<!-- Copyright (c) 2006. Adobe Systems Incorporated. All
rights reserved. -->
<html xmlns="
http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1" />
<title>Collapsible Panel Group Sample</title>
<script language="JavaScript" type="text/javascript"
src="widgets/collapsiblepanel/SpryCollapsiblePanel.js"></script>
<script language="JavaScript" type="text/javascript">
function load_content ()
if (parent.document.getElementById('main_div')) {
parent.document.getElementById('main_div').innerHTML=document.getElementById('inner_frame ').innerHTML;
if (!parent.document.getElementById('main_div')) {
window.location=('index.html') ;
</script>
<link
href="widgets/collapsiblepanel/SpryCollapsiblePanel.css"
rel="stylesheet" type="text/css" />
<link href="css/samples.css" rel="stylesheet"
type="text/css" />
<style type="text/css">
#cp1 .CollapsiblePanelContent {
overflow: scroll;
height: 300px;
.CollapsiblePanel {
width: 300px;
.CollapsiblePanelTab {
font-size: 1em;
</style>
</head>
<body onload="load_content()">
<h3>Collapsible Panel Group Sample</h3>
<p>By default the panels in a collapsible panel group
are open.</p>
<div id="inner_frame">
<div id="CollapsiblePanelGroup1"
class="CollapsiblePanelGroup">
<div class="CollapsiblePanel">
<div class="CollapsiblePanelTab" tabindex="0">Panel
23</div>
<div class="CollapsiblePanelContent">
<p>Test 1.</p>
</div>
</div>
<div class="CollapsiblePanel">
<div class="CollapsiblePanelTab" tabindex="0">Panel
2</div>
<div class="CollapsiblePanelContent">
<p>test 2</p>
</div>
</div>
<div class="CollapsiblePanel">
<div class="CollapsiblePanelTab" tabindex="0">Panel
3</div>
<div class="CollapsiblePanelContent">
<p>test 3</p>
</div>
</div>
</div>
</div>
<script language="JavaScript" type="text/javascript">
var cpg1 = new
Spry.Widget.CollapsiblePanelGroup("CollapsiblePanelGroup1", {
contentIsOpen: false });
</script>
</body>
</html>Im not sure if i'm doing it right, but it wont work for me
var scriptEle= document.createElement("script");
scriptEle.text = s;
ele.appendChild(scriptEle);
is this the exact code witch i have to replace the old one
with?
i also added the
Spry.Data.initRegions(ele);
on the end of the Spry.Utils.setInnerHTML function
i havent included the spry related javascripts in the main
page could tha be a problem?
actually i've tried to but it did'nt help
really thanx tha you willing to help -
Error While Loading XMl Doc into Oracle Database 10g
Hi all,
I have a task that , I have to make a utillity by which we can load XML Doc into a Table. While searching on Internet i found following Procedure on ASK Tom
CREATE OR REPLACE
procedure insert_xml_emps(
p_directory in varchar2, p_filename in varchar2, vtableName in varchar2 )
as
v_filelocator bfile;
v_cloblocator clob;
l_ctx dbms_xmlsave.ctxType;
l_rows number;
begin
dbms_lob.createtemporary(v_cloblocator,true);
v_filelocator := bfilename(p_directory, p_filename);
dbms_lob.open(v_filelocator, dbms_lob.file_readonly);
DBMS_LOB.LOADFROMFILE(v_cloblocator, v_filelocator,
dbms_lob.getlength(v_filelocator));
l_ctx := dbms_xmlsave.newContext(vTableName);
l_rows := dbms_xmlsave.insertxml(l_ctx,v_cloblocator);
dbms_xmlsave.closeContext(l_ctx);
dbms_output.put_line(l_rows || ' rows inserted...');
dbms_lob.close(v_filelocator);
DBMS_LOB.FREETEMPORARY(v_cloblocator);
end ;
when i try to run this procedure
BEGIN
insert_xml_emps('XML_LOAD','load.xml','IBSCOLYTD');
END;
it gaves me following Error
ORA-29532: java call terminated by uncaught java exception : Oracle.xml.sql.OracleXMLSQLException:No
rows to modify-- the row enclosing tag missing. Specify the correct row enclosing tag.
ORA-06512: at "SYS.DBMS_XMLSAVE", line 115
ORA-06512: at "EXT_TEST.INSERT_XML_EMPS", line 18
ORA-06512: at line 2
Can anyone describe me this error
Thanks.
Best Regards.SQL> /* Creating Your table */
SQL> CREATE TABLE IBSCOLYTD
2 (
3 ACTNOI VARCHAR2 (8),
4 MEMONOI NUMBER (7,0),
5 MEMODTEI DATE,
6 AMOUNTI NUMBER (8,0),
7 BRCDSI NUMBER (4,0),
8 TYPEI NUMBER (4,0),
9 TRANSMONI NUMBER (6,0)
10 );
Table created.
SQL> CREATE OR REPLACE PROCEDURE insert_xml_emps(p_directory in varchar2,
2 p_filename in varchar2,
3 vtableName in varchar2) as
4 v_filelocator BFILE;
5 v_cloblocator CLOB;
6 l_ctx DBMS_XMLSTORE.CTXTYPE;
7 l_rows NUMBER;
8 v_amount_to_load NUMBER;
9 dest_offset NUMBER := 1;
10 src_offset NUMBER := 1;
11 lang_context NUMBER := DBMS_LOB.DEFAULT_LANG_CTX;
12 warning NUMBER;
13 BEGIN
14 dbms_lob.createtemporary(v_cloblocator, true);
15 v_filelocator := bfilename(p_directory, p_filename);
16 dbms_lob.open(v_filelocator, dbms_lob.file_readonly);
17 v_amount_to_load := DBMS_LOB.getlength(v_filelocator);
18 --- ***This line is changed*** ---
19 DBMS_LOB.LOADCLOBFROMFILE(v_cloblocator,
20 v_filelocator,
21 v_amount_to_load,
22 dest_offset,
23 src_offset,
24 0,
25 lang_context,
26 warning);
27
28 l_ctx := DBMS_XMLSTORE.newContext(vTableName);
29 DBMS_XMLSTORE.setRowTag(l_ctx, 'ROWSET');
30 DBMS_XMLSTORE.setRowTag(l_ctx, 'IBSCOLYTD');
31 -- clear the update settings
32 DBMS_XMLStore.clearUpdateColumnList(l_ctx);
33 -- set the columns to be updated as a list of values
34 DBMS_XMLStore.setUpdateColumn(l_ctx, 'ACTNOI');
35 DBMS_XMLStore.setUpdateColumn(l_ctx, 'MEMONOI');
36 DBMS_XMLStore.setUpdatecolumn(l_ctx, 'MEMODTEI');
37 DBMS_XMLStore.setUpdatecolumn(l_ctx, 'AMOUNTI');
38 DBMS_XMLStore.setUpdatecolumn(l_ctx, 'BRCDSI');
39 DBMS_XMLStore.setUpdatecolumn(l_ctx, 'TYPEI');
40 DBMS_XMLStore.setUpdatecolumn(l_ctx, 'TRANSMONI');
41 -- Now insert the doc.
42 l_rows := DBMS_XMLSTORE.insertxml(l_ctx, v_cloblocator);
43 DBMS_XMLSTORE.closeContext(l_ctx);
44 dbms_output.put_line(l_rows || ' rows inserted...');
45 dbms_lob.close(v_filelocator);
46 DBMS_LOB.FREETEMPORARY(v_cloblocator);
47 END;
48 /
Procedure created.
SQL> BEGIN
2 insert_xml_emps('TEST_DIR','load.xml','IBSCOLYTD');
3 END;
4 /
PL/SQL procedure successfully completed.
SQL> SELECT * FROM ibscolytd;
ACTNOI MEMONOI MEMODTEI AMOUNTI BRCDSI TYPEI TRANSMONI
28004125 251942 05-SEP-92 400 513 1 0
28004125 251943 04-OCT-92 400 513 1 0
SQL> -
Option to load XML data into BI 70
Hi All,
I have read some postings on forums and also have read the "HOW TO load XML data in BW" guide. I am confused when I read the SAP online help documentation for loading XML data .
Question : Out of the 3 options listed below which option is best suited for loading XML data into BW . XML file is going to be provided by 3rd party company ?
Thanks and appreciate any input .
Smith .
Here is what I found for BI 70 EHP1 help :
http://help.sap.com/saphelp_nw04s/helpdata/en/b2/e50138fede083de10000009b38f8cf/frameset.htm
Data is generally transferred into SAP BW by means of a data request, which is sent from SAP BW to the source system (pull from the scheduler). You can also send the data to SAP BW from outside the system. This is a data push into SAP BW.
A data push is possible for various scenarios:
● Transferring Data Using the SOAP Service SAP Web AS
● Transferring Data Using Web Services
● Transferring Data Using SAP XI
In all three scenarios, data transfer takes place using transfer mechanisms that are sufficient for Simple Object Access Protocol (SOAP); the data transfer is also XML-based.
The SOAP-based transfer of data is only possible for flat structures. You cannot transfer hierarchy data.Hi,
I feel you can go with 2nd option. But still wait for some more inputs from Experts........
Regards,
Suman -
Code to translate xml data into html using jaxp ?
Hi all !!
Could you please send me code to translate xml data into html using jaxp
i am sending my xml file and xsl file
its urgent
my xml file is :
<?xml version="1.0" encoding="UTF-8"?>
<?xml-stylesheet type="text/xsl" href="scenario.xsl"?>
<scenarioReport>
<node name="node1">
<netObjId>124 </netObjId>
<result>undefined</result>
<report>The cell is 124.</report>
<action>qsdsqdqsd </action>
</node>
<node name="node 3">
<netObjId>124 </netObjId>
<result>undefined</result>
<report>Result is unresolved because ...</report>
<action>No action</action>
</node>
<node name="node 2">
<netObjId>124 </netObjId>
<result>undefined</result>
<report>qsdqsdqs </report>
<action>qsdsqd</action>
</node>
<node name="node 5">
<netObjId>124 </netObjId>
<result></result>
<report> </report>
<action> </action>
</node>
<node name="node 4">
<netObjId>124 </netObjId>
<result></result>
<report> </report>
<action></action>
</node>
</scenarioReport>
my xsl file is::
<?xml version="1.0" encoding="UTF-8" ?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:output method="html"/>
<xsl:template match="/">
<html>
<body>
<h2> Scenario Report</h2>
<table border="1">
<tr bgcolor="#9acd32">
<th align="left">Nodename</th>
<th align="left">netObjId</th>
<th align="left">Result</th>
<th align="left">Report</th>
<th align="left">Action</th>
</tr>
<xsl:for-each select="scenarioReport/node">
<tr>
<td><xsl:value-of select="@name"/></td>
<td><xsl:value-of select="netObjId"/></td>
<td bgcolor="#ffffff "><xsl:value-of select="result"/></td>
<td><xsl:value-of select="report"/></td>
<td><xsl:value-of select="action"/></td>
</tr>
</xsl:for-each>
</table>
</body>
</html>
</xsl:template>
</xsl:stylesheet>Must be something wrong with your XSL.
However apparently it was so urgent that you didn't have the time to look at what you posted. They just "fixed" the forum software and apparently it doesn't escape HTML that you type in any more. Or stuff that looks like HTML, either. So your post was unreadable.
If your deadline hasn't passed, try reposting that code surrounded by [pre] and [/pre]. -
Inserting XML content into Database
Hallo
i´m new to Oracle.
i want to insert xml content into the database. for testing i installed the version 10g on a windowsxp computer.
i read the oracle xmldb developer´s guide. on page 3-4 ff. it is explained how i can insert content into the database. that´s how i did it (with isqlplus):
create table example1(key_column varchar2(10) primary key, xml_column xmltype)
-->works fine
create table example2 of xmltype
-->works fine
now i made a directory under c:\myXmlFilesForDb in WinXp
create directory xmldir as 'c:/myXmlFilesForDb in WinXp'
(also tried: create directory xmldir as 'c:\myXmlFilesForDb in WinXp')
--> in this directory is a file named: mydokument.xml
--> works fine
insert into example2 values(xmltype(bfilename('xmldir','mydokument.xml'), nls_charset_id('AL32UTF8')))
the following error message is displayed (in German):
ORA-22285: Verzeichnis oder Datei für FILEOPEN-Vorgang nicht vorhanden
ORA-06512: in "SYS.DBMS_LOB",Zeile 523
ORA-06512: in "SYS:XMLTYPE",Zeile 287
ORA-06512: in Zeile 1
whats wrong? can anybody help me please?
ohhh....
thank you very much
cu
GeorgeDirectory entries are case sensitive.
Select * From dba_directories to ensure you case is the same as you are using in your insert statement.
Are you using the same user? if not grant read on directory directoryname to username;
try to just select.
select dbms_lob.getLength(BFileName('directoryname','filename.xml'))
as length
from dual; -
How to convert table content into html format?
Hi,
Experts,
How to convert internal data into HTML format is there any function module or piece of code to download content into HTML.
Thank u,
Shabeer Ahmed.Then use this code....
REPORT ytest_table_html1.
* D A T A D E C L A R A T I O N
*-HTML Table
DATA:
t_html TYPE STANDARD TABLE OF w3html WITH HEADER LINE,
" Html Table
*- Declare Internal table and Fieldcatalog
it_flight TYPE STANDARD TABLE OF sflight WITH HEADER LINE,
" Flights Details
it_fcat TYPE lvc_t_fcat WITH HEADER LINE.
" Fieldcatalog
*-Variables
DATA:
v_lines TYPE i,
v_field(40).
*-Fieldsymbols
FIELD-SYMBOLS: <fs> TYPE ANY.
* S T A R T - O F - S E L E C T I O N
START-OF-SELECTION.
SELECT *
FROM sflight
INTO TABLE it_flight
UP TO 20 ROWS.
* E N D - O F - S E L E C T I O N
END-OF-SELECTION.
*-Fill the Column headings and Properties
* Field catalog is used to populate the Headings and Values of
* The table cells dynamically
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
i_structure_name = 'SFLIGHT'
CHANGING
ct_fieldcat = it_fcat[]
EXCEPTIONS
inconsistent_interface = 1
program_error = 2.
DELETE it_fcat WHERE fieldname = 'MANDT'.
t_html-line = '<html>'.
APPEND t_html.
CLEAR t_html.
t_html-line = '<thead>'.
APPEND t_html.
CLEAR t_html.
t_html-line = '<tr>'.
APPEND t_html.
CLEAR t_html.
t_html-line = '<td><h1>Flights Details</h1></td>'.
APPEND t_html.
CLEAR t_html.
t_html-line = '</tr>'.
APPEND t_html.
CLEAR t_html.
t_html-line = '</thead>'.
APPEND t_html.
CLEAR t_html.
t_html-line = '<table border = "1">'.
APPEND t_html.
CLEAR t_html.
t_html-line = '<tr>'.
APPEND t_html.
CLEAR t_html.
*-Populate HTML columns from Filedcatalog
LOOP AT it_fcat.
CONCATENATE '<th bgcolor = "green" fgcolor = "black">'
it_fcat-scrtext_l
'</th>' INTO t_html-line.
APPEND t_html.
CLEAR t_html.
ENDLOOP.
t_html-line = '</tr>'.
APPEND t_html.
CLEAR t_html.
DESCRIBE TABLE it_fcat LINES v_lines.
*-Populate HTML table from Internal table data
LOOP AT it_flight.
t_html-line = '<tr>'.
APPEND t_html.
CLEAR t_html.
*-Populate entire row of HTML table Dynamically
*-With the Help of Fieldcatalog.
DO v_lines TIMES.
READ TABLE it_fcat INDEX sy-index.
CONCATENATE 'IT_FLIGHT-' it_fcat-fieldname INTO v_field.
ASSIGN (v_field) TO <fs>.
t_html-line = '<td>'.
APPEND t_html.
CLEAR t_html.
t_html-line = <fs>.
APPEND t_html.
CLEAR t_html.
t_html-line = '</td>'.
APPEND t_html.
CLEAR t_html.
CLEAR v_field.
UNASSIGN <fs>.
ENDDO.
t_html-line = '</tr>'.
APPEND t_html.
CLEAR t_html.
ENDLOOP.
t_html-line = '</table>'.
APPEND t_html.
CLEAR t_html.
*-Download the HTML into frontend
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filename = 'C:\Flights.htm'
TABLES
data_tab = t_html
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
no_authority = 5
unknown_error = 6
header_not_allowed = 7
separator_not_allowed = 8
filesize_not_allowed = 9
header_too_long = 10
dp_error_create = 11
dp_error_send = 12
dp_error_write = 13
unknown_dp_error = 14
access_denied = 15
dp_out_of_memory = 16
disk_full = 17
dp_timeout = 18
file_not_found = 19
dataprovider_exception = 20
control_flush_error = 21
OTHERS = 22.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*-Display the HTML file
CALL METHOD cl_gui_frontend_services=>execute
EXPORTING
document = 'C:\Flights.htm'
operation = 'OPEN'
EXCEPTIONS
cntl_error = 1
error_no_gui = 2
bad_parameter = 3
file_not_found = 4
path_not_found = 5
file_extension_unknown = 6
error_execute_failed = 7
synchronous_failed = 8
not_supported_by_gui = 9
OTHERS = 10.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
none of the above function modules r obsolete... -
Loading XML files into an 8.0.6 database...
Hi,
I've got an Oracle 8.0.6 instance (Sun E250 Solaris 5.7) with multiple import data feeds. I am currently using SQL*Loader to load this data which are flat text delimited files. My data feeds will soon be supplying XML files instead of these flat files which is great, unfortunately, I will not be able to upgrade in 8.1.7 in time so that I can use the XML parser.
Is there anyway I can use SQL*Loader or some other tool to load XML files into my 8.0.6 database? If there is a way, could someone please send the information I would need to help perform this task?
Thanks for all your help...
Gerry D'Costa
Database Administrator
[email protected]
12Snap.comCheck out the Oracle XDB Developer's Guide, Chapter 3. There is an example of using BFileName function to load the xml files from a directory object created using create or replace directory. It works really well.
Ben -
Loading XML files into Database table
Loading XML files into Database table
Hi I have some XML files say 100 files in a virtual directory created using "Create or replace directory command" and those files need to be loaded into a table having a column of XMLTYPE. 1)How to load that using Oracle provided procedures/packagesCheck out the Oracle XDB Developer's Guide, Chapter 3. There is an example of using BFileName function to load the xml files from a directory object created using create or replace directory. It works really well.
Ben -
Load XML File into temporary tables using sql loader
Hi All,
I have an XML file as below. I need to insert the contents into a temporary staging table using sql loader. Please advice how I need to do that.
For example Portfolios should go into a seperate table, and all the tags inside it should be populated in the columns of the table.
Family should go into a seperate table and all the tags inside it should be populated in the columns of the table.
Similarly offer, Products etc.
- <ABSProductCatalog xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
- <ProductSalesHierachy>
- <Portfolios>
- <Portfolio productCode="P1">
<Attribute name="CatalogProductName" value="Access" />
<Attribute name="Status" value="Active" />
</Portfolio>
- <Portfolio productCode="P2">
<Attribute name="CatalogProductName" value="Data" />
<Attribute name="Status" value="Active" />
</Portfolio>
- <Portfolio productCode="P3">
<Attribute name="CatalogProductName" value="Voice" />
<Attribute name="Status" value="Active" />
</Portfolio>
- <Portfolio productCode="P4">
<Attribute name="CatalogProductName" value="Wireless" />
<Attribute name="Status" value="Active" />
</Portfolio>
</Portfolios>
- <Families>
- <Family productCode="F1">
<Attribute name="CatalogProductName" value="Internet Access Services" />
<Attribute name="Status" value="Active" />
- <ParentHierarchy>
<Item productCode="P1" modelType="Portfolio" />
</ParentHierarchy>
</Family>
- <Family productCode="F2">
<Attribute name="CatalogProductName" value="Local Access Services" />
<Attribute name="Status" value="Active" />
- <ParentHierarchy>
<Item productCode="P2" modelType="Portfolio" />
</ParentHierarchy>
</Family>
</Families>
- <SubFamilies>
- <SubFamily productCode="SF1">
<Attribute name="CatalogProductName" value="Business Internet service" />
<Attribute name="Status" value="Active" />
- <ParentHierarchy>
<Item productCode="F1" modelType="Family" />
</ParentHierarchy>
</SubFamily>
</SubFamilies>
- <ProductRefs>
- <ProductRef productCode="WSP1" modelType="Wireline Sales Product">
<ActiveFlag>Y</ActiveFlag>
- <ProductHierarchy>
<SalesHierarchy family="F1" subFamily="SF1" portfolio="P1" primary="Y" />
<SalesHierarchy family="F2" portfolio="P2" primary="N" />
<FinancialHierarchy quotaBucket="Voice" strategicProdCategory="Local Voice" />
</ProductHierarchy>
</ProductRef>
- <ProductRef productCode="MSP2" modelType="Handset">
<ActiveFlag>Y</ActiveFlag>
- <ProductHierarchy>
<SalesHierarchy portfolio="P4" primary="Y" />
</ProductHierarchy>
</ProductRef>
</ProductRefs>
</ProductSalesHierachy>
- <Offers>
- <Offer productCode="ABN">
<OfferName>ABN</OfferName>
<OfferDescription>ABN Description</OfferDescription>
- <Segments>
<Segment>SCG</Segment>
<Segment>PCG</Segment>
</Segments>
<OfferUpdateDate>2009-11-20</OfferUpdateDate>
<ActiveFlag>Y</ActiveFlag>
</Offer>
- <Offer productCode="OneNet">
<OfferName>OneNet</OfferName>
<OfferDescription>OneNet Description</OfferDescription>
- <Segments>
<Segment>SCG</Segment>
<Segment>PCG</Segment>
<Segment>PCG2</Segment>
</Segments>
<OfferUpdateDate>2009-11-20</OfferUpdateDate>
<ActiveFlag>Y</ActiveFlag>
</Offer>
</Offers>
- <Products>
- <Product productCode="WSP1" modelType="Wireline Sales Product">
<ProductName>AT&T High Speed Internet</ProductName>
<ProductDescription>High Speed Internet</ProductDescription>
<LegacyCoProdIndicator>SBC</LegacyCoProdIndicator>
<RevenueCBLCode>1234B</RevenueCBLCode>
<VolumeCBLCode>4567A</VolumeCBLCode>
<SAARTServiceIDCode>S1234</SAARTServiceIDCode>
<MarginPercentRequired>Y</MarginPercentRequired>
<PercentIntl>%234</PercentIntl>
<UOM>Each</UOM>
<PriceType>OneTime</PriceType>
<ProductStatus>Active</ProductStatus>
<Compensable>Y</Compensable>
<Jurisdiction>Everywhere</Jurisdiction>
<ActiveFlag>Y</ActiveFlag>
- <Availabilities>
<Availability>SE</Availability>
<Availability>E</Availability>
</Availabilities>
- <Segments>
<Segment>SCG</Segment>
<Segment>PCG</Segment>
</Segments>
<VDIndicator>Voice</VDIndicator>
<PSOCCode>PSOC 1</PSOCCode>
<USBilled>Y</USBilled>
<MOWBilled>N</MOWBilled>
<ProductStartDate>2009-11-20</ProductStartDate>
<ProductUpdateDate>2009-11-20</ProductUpdateDate>
<ProductEndDate>2010-11-20</ProductEndDate>
- <AliasNames>
<AliasName>AT&T HSI</AliasName>
<AliasName>AT&T Fast Internet</AliasName>
</AliasNames>
- <OfferTypes>
<OfferType productCode="ABN" endDate="2009-11-20" />
<OfferType productCode="OneNet" />
</OfferTypes>
- <DynamicAttributes>
- <DynamicAttribute dataType="String" defaultValue="2.5 Mbps" name="Speed">
<AttrValue>1.5 Mbps</AttrValue>
<AttrValue>2.5 Mbps</AttrValue>
<AttrValue>3.5 Mbps</AttrValue>
</DynamicAttribute>
- <DynamicAttribute dataType="String" name="TransportType">
<AttrValue>T1</AttrValue>
</DynamicAttribute>
</DynamicAttributes>
</Product>
- <Product productCode="MSP2" modelType="Handset">
<ProductName>Blackberry Bold</ProductName>
<ProductDescription>Blackberry Bold Phone</ProductDescription>
<LegacyCoProdIndicator />
<RevenueCBLCode />
<VolumeCBLCode />
<SAARTServiceIDCode />
<MarginPercentRequired />
<PercentIntl />
<UOM>Each</UOM>
<PriceType />
<ProductStatus>Active</ProductStatus>
<Compensable />
<Jurisdiction />
<ActiveFlag>Y</ActiveFlag>
- <Availabilities>
<Availability />
</Availabilities>
- <Segments>
<Segment>SCG</Segment>
<Segment>PCG</Segment>
</Segments>
<VDIndicator>Voice</VDIndicator>
<PSOCCode />
<USBilled />
<MOWBilled />
<ProductStartDate>2009-11-20</ProductStartDate>
<ProductUpdateDate>2009-11-20</ProductUpdateDate>
- <AliasNames>
<AliasName />
</AliasNames>
- <OfferTypes>
<OfferType productCode="ABN" />
</OfferTypes>
- <DynamicAttributes>
- <DynamicAttribute dataType="String" name="StlmntContractType">
<AttrValue />
</DynamicAttribute>
- <DynamicAttribute dataType="String" name="BMG 2 year price">
<AttrValue>20</AttrValue>
</DynamicAttribute>
- <DynamicAttribute dataType="String" name="MSRP">
<AttrValue>40</AttrValue>
</DynamicAttribute>
- <DynamicAttribute dataType="String" name="BMGAvailableType">
<AttrValue />
</DynamicAttribute>
- <DynamicAttribute dataType="String" name="ProductId">
<AttrValue>123456</AttrValue>
</DynamicAttribute>
- <DynamicAttribute dataType="String" name="modelSource">
<AttrValue>product</AttrValue>
</DynamicAttribute>
</DynamicAttributes>
</Product>
</Products>
<CatalogChanged>Y</CatalogChanged>
</ABSProductCatalog>Two options that come to mind. Others exist.
#1 - {thread:id=474031}, which is basically storing the XML in an Object Relational structure for parsing
#2 - Dump the XML into either an XMLType based table or column and use SQL (with XMLTable) to create a view that parses the data. This would be the same as the view shown in the above post.
Don't use sql*loader to parse the XML. I was trying to find a post from mdrake about that but couldn't. In short, sql*loader was not build as an XML parser so don't try to use it that way. -
Loading XML file into non-XML table(s)
HI Gentlemen,
I successfully registered my schema and generated an xml-based table and a TYPE. However, I do not have the table that would correspond to this TYPE. How do I get to it? How can I use FTP or HTTP protocol to load actual data from the corresponding .xml file into this table?
Thanks in advance, kind regards from
Miklos HERBOLYYou need to include the XML schema location information in the XML documents to point to the registered XML schema.
For example,
If you register an XML schema to XML DB with "http://www.example.com/po.xsd"
In the XML document, the xml schema location can be:
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.example.com/po.xsd http://www.example.com/po.xsd">
For more information, you can check the example in the following page:
http://www.oracle.com/technology/sample_code/tech/xml/xmldb/index.html
Best, -
Load XML extraway into Oracle 8i
Hi all
I have to load an DB XML extraway into my Oracle 8i, but I don't know how I have to do. I have defined tables, but now I have to load data.
Coul you help me, please?
Thanks in advance
PaoloHi user;
Please check below and see its helpful:
Loading a large XML Document into the Database
http://www.oracle.com/technology/sample_code/tech/java/codesnippet/xmldb/HowToLoadLargeXML.html
Understanding the power of XML and how XML and PL/SQL can work together
http://www.oracle.com/oramag/oracle/01-jul/o41xml.html
Oracle® XML DB Developer's Guide 10g Release 2 (10.2)
http://www.oracle.com/technology/software/index.html
Also check:
How to Insert data from an XML file into an Oracle 10g table
How to Insert data from an XML file into an Oracle 10g table
Hope it helps
Regard
Helios
Maybe you are looking for
-
My mac is a version 10.5.8. I just downloaded ios7, and it is telling me I need to download iTunes 11 to connect to my phone, but I don't have a new enough version. What do I do?! I think snow leopard was the last update I purchased. Is there a way
-
A2107 Ideapad 12v adapter: will the OA36247 for the Thinkpad Tablet 1838 work for this unit?
Hi- I've got a Thinkpad Slate Tablet (Android OS) and the 12v adapter that goes with this unit...will the adapter work with the other Lenovo tablets such as the A2107 Ideapad? Thanks in advance for rendered clarity. Solved! Go to Solution.
-
Purchased audiobook on iPad - it disappeared when I selected iTunes Match.
I bought an audiobook on my new iPad air. Later, I wanted to get all my playists from the iCloud so I selected iTunes Match. The standard warning came up saying that my current library would be replaced by the one on iCloud. "OK, no problem," I th
-
Publish camera stream to rootInstall/applications/multicast of FMS4.5 with no data?
I try to publish my camera stream to FMS4.5 (applications/multicast) as a P2P stream on the client-side,and I get reponse:“NetStream.Publish.Start ” and “NetStream.Connect.Success” , but the NetStream info is "currentBytesPerSecond=0 byteCount=0 maxB
-
Retrieving sort and filter criteria for interactive report
I have developed a test management system in APEX. Users log in and see an interactive report with their assignments. Each test they've been assigned occupies one row. There is an "Execute" link for each row that takes the user to the test execution