Loaded data not visible for Reporting?

Hi all,
   In the info cube, the data is not visible for reporting, How can i make it available for reporting,
When i select the Manage option from the context menu of the cube and select the Requests Tab, i get a pop up message that tells
" There is an inconsistency between the load status of the data and the option of reporting on this data.
There is data in the InfoCube/ODS object that is OK from a quality point of view, but is not yet displayed in reporting.
The problem, for example, is to do with request 0000018049, number REQU_F4ZBFRMDGBULE9WCUN3R5UX5X."
How do i find out the inconsistancies?
PS: All the requesta are delta upload
Thanks n regards
Girikumar

Hi Girikumar
Use the RSRV transaction and check the inconsistency of the cube ..If any inconsistency is there repair that with the repari option in the toolbar..
Let me knwo if it not resolved..
Bye
Shu Moh..

Similar Messages

  • Dashboard data not visible for the users - buffer issue?

    It occurred several times last weeks that some out of 7 dashboards are not visible to the Dashboard users.
    The scenario is the same all the time: users fills in the data, reviews it and posts some comments. Next morning the user canu2019t see the data in the system.
    What can be the problem?

    Hi,
    IF your Company has NEtweaver License and the SAPNET User has access right to download section, you must be able to add SP Stacks to Download Basket.
    If you have license and use have access, then please contact with local SAP Subsdiary for this problem.
    But to be able to download some patches, you must have Solution Manager & Maintanance Optimizer to approve the items in basket.

  • GN_INVOICE_CREATE - Creates Invoice but not visible (for Report RVAFSS00 )

    Hi,
    I am running GN_INVOICE_CREATE using SE37.  I have supplied the data and stepped through the code.  At the end of the execution - I get a successful message stating that the "Document 9000007 is saved".  If I go into VF03 and try to bring up Billing document 9000007 - I get the error message "Billing document 9000007 does not exist."
    I am not sure if i am supplying all of the input parameters correctly to make sure that the transaction is committed.  I cannot find enough documentation about GN_INVOICE_CREATE parameters.  The only information I did find for the input is under the Billing (SD-BIL)->Billing->The General Billing Interface->Function Module Parameter at  http://help.sap.com/saphelp_46c/helpdata/en/dd/5615db545a11d1a7020000e829fd11/content.htm and http://help.sap.com/saphelp_46c/helpdata/en/dd/5615b4545a11d1a7020000e829fd11/content.htm .  But that does not describes all of the input parameters like (VBSK_I, WITH_POSTING, CALLER_TYPE, I_WITHOUT_REFRESH, ID_NO_ENQUEUE, ID_KVORG, ID_NO_DIALOG, ID_NEW_CANCELLATION)      
    Do I need to create a wrapper RFC and call a BAPI_COMMIT_WORK as in BAPI_SALESORDER_CREATEFROMDAT2?  Or am i passing the parameters incorrectly:
    Here is what I am passing in SE 37:
    DELIVERY_DATE =                   08/14/2006
    INVOICE_DATE =                     08/14/2006
    INVOICE_TYPE =                     FX        
    PRICING_DATE                              
    VBSK_I                                    
    WITH_POSTING =                     A         
    CALLER_TYPE                               
    I_WITHOUT_REFRESH =                X         
    ID_NO_ENQUEUE                             
    ID_KVORG =                         06        
    ID_NO_DIALOG =                     X         
    ID_NEW_CANCELLATION                       
    The XKOMFKGN and XKOMFKKO tables I believe are correct based on the Communication Structure help files.
    Any help in figuring this out is appreciated.  Also, if you can let me know what the following field inputs are -VBSK_I, WITH_POSTING, CALLER_TYPE, I_WITHOUT_REFRESH, ID_NO_ENQUEUE, ID_KVORG, ID_NO_DIALOG, ID_NEW_CANCELLATION. 
    The reason I am going through this RFC is that we are looking at using Report RVAFSS00 to import a file that then runs the GN_INVOICE_CREATE to create billing documents with external transactions as defined in the General Billing interface.
    Regards,
    Jay

    Did not find the documentation for the fm any where, i think best place to look for is OSS.
    Parameter: ID_NO_DIALOG is for suppressing some shipping related screen and ID_NO_ENQUEUE is for locking sales order or delivery doc.
    By using where used list of the function module, some times it's possible to find out the use of other parameters.
    Hope this helps.
    Regards
    Sridhar

  • Data Not Populating for report

    Hi,
    i am using Oracle BI Applications 7.9.6, i just loaded few sample data using universal adaptor. In "Financials GL - Budget and Expenses" subject area, there are two facts: Facts-Budget, Facts-Actuals.
    I could get the data with dimensions across these two fact columns independently like "one column from company dimension + one measure from Facts-Budget" and "one column from cost center dimension + one measure from Facts-Actuals", but when i apply the report with "one column from company dimension + one column from Facts-Budget + one column from Facts-Actuals", i am unable to get any data. I have checked the physical tables if data was coming and row counts are fine. Please suggest me on what should i check on.
    Thanks,
    Sreekanth.

    Hi
    could you please provide the error you are getting while running the report other way you can go through below mentioned link
    OBIEE: Incorrectly defined logical table source doesn't contain mapping
    i hope this will help you..
    thanks & regards

  • How to make data loaded into cube NOT ready for reporting

    Hi Gurus: Is there a way by which data loaded into cube, can be made NOT available for reporting.
    Please suggest. <removed>
    Thanks

    See, by default a request that has been loaded to a cube will be available for reporting. Bow if you have an aggregate, the system needs this new request to be rolled up to the aggregate as well, before it is available for reporting...reason? Becasue we just write queries for the cube, and not for the aggregate, so you only know if a query will hit a particular aggregate at its runtime. Which means that if a query gets data from the aggregate or the cube, it should ultimately get the same data in both the cases. Now if a request is added to the cube, but not to the aggregate, then there will be different data in both these objects. The system takes the safer route of not making the 'unrolled' up data visible at all, rather than having inconsistent data.
    Hope this helps...

  • Navigational attribute data not visible in BEx Report

    Hello All,
    I am facing following problem in one of my BEx reports:
    I am fetching data from an ODS. With other columns of ODS,  I have also to show few navigational attributes( which are master data of some info-object) . In report the corresponding data in navigational attributes is not visible for few records, although when I see the master data of this Info-object (whose navigational attributes I have to include), in  Adm. Wrkbench the data is visible. I wonder what step is missing.
    Many Thanks for helping me out.
    Best Regards,
    Sumita

    Hi Roberto,
    While trying to activate the Infoobject's master data (by right-click) I get the following message,
    "Lock NOT set for: Loading master data attributes"
    And the data is not activated.
    Can you please suggest what needs to be done.
    Thanks & Regards,
    Sumita

  • Best practices for loading apo planning book data to cube for reporting

    Hi,
    I would like to know whether there are any Best practices for loading apo planning book data to cube for reporting.
    I have seen 2 types of Design:
    1) The Planning Book Extractor data is Loaded first to the APO BW system within a Cube, and then get transferred to the Actual BW system. Reports are run from the Actual BW system cube.
    2) The Planning Book Extractor data is loaded directly to a cube within the Actual BW system.
    We do these data loads during evening hours once in a day.
    Rgds
    Gk

    Hi GK,
    What I have normally seen is:
    1) Data would be extracted from APO Planning Area to APO Cube (FOR BACKUP purpose). Weekly or monthly, depending on how much data change you expect, or how critical it is for business. Backups are mostly monthly for DP.
    2) Data extracted from APO planning area directly to DSO of staging layer in BW, and then to BW cubes, for reporting.
    For DP monthly, SNP daily
    You can also use the option 1 that you mentioned below. In this case, the APO cube is the backup cube, while the BW cube is the one that you could use for reporting, and this BW cube gets data from APO cube.
    Benefit in this case is that we have to extract data from Planning Area only once. So, planning area is available for jobs/users for more time. However, backup and reporting extraction are getting mixed in this case, so issues in the flow could impact both the backup and the reporting. We have used this scenario recently, and yet to see the full impact.
    Thanks - Pawan

  • Data not visible in query output

    Hi Gurus
    I have a report which is being published at the portal but the data is not visible for it...now when i check the query for that report and try to run it. i still don't see any data..now on further analysis when i use the same filters used in the query on the multiprovider on which the query is created i can see the data and when i run the report in RSRT, i can  see the data...but don't know why its not visible when i execute the query or the report on the the portal....plz suggest..points will be awarded..

    Hi Akash
    Check the query with Bex Analyzer; If it give you the correct result then It might be configuration problem with your JAVA settings..
    Please try And also run Support Desk Tool
    (SAP Note 937697 ) to figure out the configuration Issues....
    Regards
    Vivek Tripathi

  • E-Recruiting - Internal Candidates not displayed in candidate search, job postings not visible for internal candidates in job search

    Hi Friends,
    We are on EREC standalone model. Initial data transfer between HR to EREC master data using PFAL is done.
    All employees have got NA, CP, US, BP in HRP 1001 in EREC system.
    Change pointers are also activated in HCM system, now current master data changes are also in reflecting in EREC system thro IDOC posting.
    But when recruiter logs into portal and does a candidate search, no internal candidates are appearing ?
    1) What needs to be done for internal candidates to visible during candidate search ?
    2) Also while logged as internal candidate, released requisitions are not visible for internal candidates while they try to search for internal job postings ?
    Kindly provide your inputs.
    Regards,
    ER.

    Hi,
    In SLG1, getting the below error messages for multiple times.
    "Error while calling content extraction class CL_HRRCF_CEC_QUALI_WITH_PROFCY 
    The error occurred in program CL_HRRCF_SES_BUSOBJ_FROM_SPTYPCM001 line 96  
    Qualification 52000001 does not exist
    The incorrect HR object has the key 01NA60000029 "
    "The error occurred in program CL_HRRCF_ALE_EE_INBOUND"
    Also please state how to differentiate internal and external candidate search pages.
    Regards,
    ER.

  • Key focus is not visible for all objects when tabbing

    I'm using LabView 5.1.
    The key focus is not visible for all objects when tabbing through a "disabled and grayed-out" object.
    For example, let's say I create a panel with 3 buttons. If I create a "disabled" attribute for button 2 and assign the value "2" (disabled and grayed-out) to it. When I will run this VI, the key navigation will go through button 1 and button 3 (skipping button 2 as expected) but the key focus on button 3 will not be visible.
    Is this a bug with LabView or am I doing something wrong ?

    Hi Ben,
    Don't worry, time is not an issue... I'm posting an example of a VI with the problem I described. I noticed that the problem occurs only with "dialog buttons".
    When you have time, let me know if you see the same behavior. If you do, I will report the problem to National Instrument.
    Thanks for your time !
    BigBen
    Attachments:
    3buttons.vi ‏22 KB

  • Services for object box not visible for some users

    Dear All,
    PM module experts please help. In equipment master transaction IE02  in left hand top corner we get  box for SERVICES FOR OBJECT which is useful for attaching external documents like word and excel. but problem  is it is  not visible for some users.  Our security/authorisation team has also done some check but didn't get any solution.
    anybody knows the reason why there is no box availabe?
    Thanks
    SR

    Dear Siddhartho Raha
    I think this problem related ABAP work,this problem very general problem,first refer any note availble or search throgh any class in SE24
    note are like this way 492331,this is not related to your query but same like it is and also may be
    Due to an error in the coding, it was possible to link a Word document to a Document in IE01. Because the data cannot be saved in transaction IE01, the linked document is lost after leaving the transaction.
    Hope this may helps you
    Prem.

  • Project Commitment Cost not visible for Purchase Orders with Item Categry Q

    Hello All
    I have a problem. My project commitment cost is not visible for PO's with Item Category Q. I assume that as the stock can be issued against any WBS elements I might not be able to see the cost against a single WBS element. But the cost should get recorded against the project right? If so where can I see it?
    Request your help with this problem
    Regards
    Renjith

    Hello
    Could you please explain how to maintain that?
    Best Regards
    Renjith

  • JComboBox - Bottom border is not visible for the first time

    JComboBox - Bottom border is not visible for the first time i click on the arrow to drop the list down.
    This happens because the list when dropped down goes out of the frame.
    If have the increased the size of the Frame then i am able to see it,but i dont want to do this.
    I am using jdk1.3.1_02.
    Any Help would be great.
    Please find the code below.
    Thanks,
    Sridhar.
    //file: Lister.java
    import java.awt.*;
    import java.awt.event.*;
    import javax.swing.*;
    public class Lister {
        public static void main(String[] args) {
            JFrame frame = new JFrame("Lister v1.0");
            // create a combo box
            String [] items = { "uno", "due", "tre", "quattro", "cinque",
            "sei", "sette", "otto", "nove", "deici",
            "undici", "dodici" };
            JComboBox comboBox = new JComboBox(items);
            comboBox.setEditable(true);
            // put the controls the content pane
            Container c = frame.getContentPane( );
            JPanel comboPanel = new JPanel( );
            comboPanel.add(comboBox);
            c.add(comboPanel, BorderLayout.NORTH);
            c.setBackground(Color.white);
            comboBox.setBackground(Color.white);
            comboPanel.setBackground(Color.white);
            frame.setBackground(Color.white);
            frame.setResizable(false);
            frame.setSize(200, 200);
            frame.setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );
            frame.setVisible(true);
    }

    Hello,
    try this:JPanel comboPanel = new JPanel(new BorderLayout());Regards,
    Tim

  • Drop down list(JComboBox) - Bottom border is not visible for the first time

    Drop down list(Combo-box) JComboBox - Bottom border is not visible for the first time i click on the arrow to drop the list down.
    I am using jdk1.3.1_02.
    Did any one face this issue.
    Please let me know.
    Thanks,
    Sridhar.

    I must be a little confused regarding your question.
    You can simply change your code frame.setSize(200, 200); to frame.setSize(400, 400);When you say you are unable to see the border are you specifically talking about the border of the frame or the border of the combo box?
    Lance

  • Files newly added in system after having opened firefox are not visible for attachments

    if firefox is alrady running & new file is being added to the system,the same is not visible for attaching the file in gmail. what must be the issue?

    if firefox is alrady running & new file is being added to the system,the same is not visible for attaching the file in gmail. what must be the issue?

Maybe you are looking for