Loaded from text cd. will not run samples from same cd

I have adopted Delmar text Electronic Devices: Systems & Applications and intended to use the copies of multisim 2001 that we own.  When I discovered that the text includes a limited copy of Multisim textbook edition, that seemed even better; it installed clean, but when I attempted to open any of the included sample files on the CD, it told me that this edition could only open sample files from the install CD: exactly what I was trying to do.  What's going on?  I'm running Vista Home Premium, which will typical for several of my students.

I would suggest that you copy the contents of the CD into your local hard disk, "and" make sure they are not read-only as most of the files of a CD are. So, in other words, open the files on your computer, not from the CD.
Give that a try to see if that is causing the problem, since on the other hand, Multisim 2001 is not designed for Vista, only the latest release Multisim 10.0.1 is the one supported under Windows Vista.
Nestor
National Instruments

Similar Messages

  • TV@nywhere loads on ME but will not run

    Whenever I try to run this program on my Windows ME computer, I get  "Program Error. Your program is making an invalid dynamic link call to a .DLL file" .  If I exit from the hotkey at the bottom of my screen, I get an error saying "Winciemamgr has caused an error in Kernel32.DLL. Wincinemamgr will now close."  
    This is really frustrating and I do not know what to do....any ideas?

    DLL stands for DynamicLinkLibrary. These files are common files that software manufacturers link to, so they don't have to include the same code over and over and over again. When new versions of software come out, the size of the .DLL file decreases/increases but the name stays the same. An "invalid link" occurs when an application attempts to "link" to this file that has been changed and no longer contains the code needed to operate.
    You and I cause these problems when we install and uninstall programs. It is up to you and I to find the correct .DLL file and re-install it.   Hint: It's usually the largest size and/or latest date stamp that works for all programs.
    I run WinME on my game machine attached to my 57" HDTV and get over 250 frames per second out of a Radeon 9000 Pro.
    WinME is a fantastic gaming platform when you get the correct .DLL's installed. WinME was installed correctly a year ago and still runs rock stable.
    My game machine has an Albatron KX-400 motherboard with an Athlon XP 1800+ overclocked to 2.3GHz (XP 2800+) and runs WinME. I don't use the TV@nywhere in this machine. It is not the machine listed in my signature.

  • Text problem - will not run on...gets cut off

    I need my text to appear to the right hand side of an image, so on the left of the screen is the image, and to the right is the text.
    Is there an option to make the text run on, underneath itself? It keeps running along and gets cut off the edge of the screen!

    yeah, just hit 'enter' when you want a line break. it's not like MS Word where it breaks when you hit a margin. once you are done typing your text you can center it or make it left or right adjusted.
    Message was edited by: budakhan

  • Palm desktop 4.1.4 will not run fatal error during load from startbar (Palm Vx)

    Hello
    My problem is the desktop software will not run. According to documentation, it is os 3.5 on hand held and 4.1.4 is right for my computer OS (98). I can hotsync most but not all of the applications (notably: recent memo entries won't) with the Home software button but not the hardware button. I have done a soft reset and just downloaded the palm desktop software and loaded it today.
    Post relates to: Palm Vx

    Oh, sorry I neglected to review your original post regarding the OS.
    Try using the following directions to see if you can "clean" uninstall Palm desktop. They are for XP but most of the instructions should work on 98. Once you uninstall, sync with the conduits set at handheld overwrites desktop.
    You should first make a copy of your data to have just in case something
    happens. You can find your data files by going to C:\Program Files\Palm or
    Palm One. Highlight your Palm Desktop username and right click and copy.
    Then go to your PC desktop, right click on a blank spot and select paste.
    Now you want to uninstall Palm Desktop and remove everything that has to do
    with Palm Desktop from your computer. Like the above folder, delete the Palm folder. Once this is done, you will need to delete some registry keys
    from your PC Operating System registry.
    Word of warning, going here and deleting the wrong thing can cause your PC
    to not start up, crashing and deletion of programs and data. If you feel
    you are unsure of yourself, see if you have a friend that can help you or a
    PC technician that you can pay to help you. This will show them everything
    they need to delete. To retain your current Registry settings, we need to do a backup of the Registry.
    On the PC, go to start and run type "regedit" without quotes
    Highlight MY COMPUTER, go to File --> export. Should pop up with a Save As
    box. Current location is fine should be in My Documents or you can change to a location you will remember. In the file name box, type "Regbackup[todaysdate]" i.e. Regbackup07072008. Next, the hard part.
    The easiest way to make sure your working with the correct key, highlight the key i.e. palm quick install, and press delete on your keyboard. It will ask you, are
    you sure. Say yes. Do the same thing for all keys below.
    If you make a mistake, stop what you are doing. And call a PC technician.
    BUT do not turn off your computer.
    The reg keys are as follows (Note: some of theses reg keys will not be here
    but if they are delete them)
    * HKEY_CURRENT_USER\Software\U.S. Robotics\Palm Quick Install
    * HKEY_CURRENT_USER\Software\U.S. Robotics\PalmOne File Transfer
    * HKEY_CURRENT_USER\Software\U.S. Robotics\Pilot Desktop
    * HKEY_CURRENT_USER\Software\Palm
    * HKEY_CURRENT_USER\Software\Palm, Inc.
    * HKEY_CURRENT_USER\Software\PalmDesktopAutorun
    * HKEY_CURRENT_USER\Software\palmOne
    * HKEY_CURRENT_USER\Software\PalmSource
    * HKEY_LOCAL_MACHINE\Software\PalmSource or anything else that says palm
    Next reboot your computer
    Then reinstall your Palm desktop from the CD and do a hotsync. If it asks
    you for a username and you synced your device before, put in 'test" if you
    did not sync before you create a hotsync name.
    Post relates to: Palm i705

  • Hello, I am trying to use a photo,that I've opened up in pages on a blank landscape, taken from my camera roll and use it as album cover art. All the custom text's will not paste when I copy.  Pic and texts are saved as a PDF, how can I paste the doc ?

    Hello, I am trying to use a photo,that I've opened up in pages on a blank landscape, taken from my camera roll and use it as album cover art. All the custom text's will not paste when I copy.  Pic and texts are saved as a PDF, how can I paste the doc ?

    Hello, I am trying to use a photo,that I've opened up in pages on a blank landscape, taken from my camera roll and use it as album cover art. All the custom text's will not paste when I copy.  Pic and texts are saved as a PDF, how can I paste the doc ?

  • I was going to upgrade from 10.6.8 to mavericks 10.9.2, but the installer program notified me stating my appleworks 6 app will not run on the new set up. is there a procedure to keep or switch my documents in order to obtain the mavericks upgrade?

    i was going to upgrade from 10.6.8 to mavericks 10.9.2, but the installer program notified me stating my appleworks 6 app will not run on the new set up. is there a procedure to keep or switch my documents in order to obtain the mavericks upgrade?

    I can't say personally since I never used AW, but see if these articles help:
    http://www.macworld.com/article/1166370/open_old_docs.html
    http://www.cultofmac.com/248546/convert-system-os-9-appleworks-6-files-to-os-x-p ages-files-os-x-tips/
    I suggest that you clone your current drive with 10.6.8 to an external drive. If you have any issues after upgrading to Mavericks, you can boot back into 10.6.8.
    Both of these applications can be used to create a clone. If you need help creating your clone, let us know.
    SuperDuper! http://www.shirt-pocket.com/
    CCC http://www.bombich.com/download.html

  • The Elements 12 Mac disk works fin - I also have a Dell, and the Windows disk will not run at all, sounds like it's grinding, and is almost impossible to remove from the hard drive.  I cannot find any place to tell me who to CALL to ask for a replacement!

    The Elements 12 Mac disk works fine - I also have a Dell, and the Windows disk will not run at all, sounds like it's grinding, and is almost impossible to remove from the hard drive.  I cannot find any place to tell me who to CALL to ask for a replacement!

    Hi Samcat,
    You can use a download instead of the disk as an alternative: Adobe - Download free trial version Adobe Photoshop Elements 12 | Adobe you can license with your serial
    Please test the disk in another windows machine to check if it's caused by the drive or the disk. If you tested with 2 drives please start a support case, i assume Adobe will only provide downloads at this point. They are the same as the trials. If you still need a disk you can burn the trial to a disk as a backup disk. Good luck!

  • Battery shows as having charge in System Profiler yet will not run from bat

    My MacBook is about a year and half old. My battery just started doing this a few days ago. It shows as not charging. Checking the battery shows that it has 85% power left (this was 86% the day it started). The magsafe connector stays green. The MacBook will not run without the power connected.
    I am not sure if this is an issue with the battery, the batteries connector, or with my MacBook. I'm pretty tight fro cash right now and need my MacBook working. I don't have money to throw at parts I don't need. If anyone has experienced this issue before and has any insight please let me know. I'm a starving web programmer and I need to be able to bring my MacBook with me to meet with clients.
    Thanks,
    Steven
    Battery Information:
    Model Information:
    Serial Number: DP-ASMB016-3738-3b2a
    Manufacturer: DP
    Device name: ASMB016
    Pack Lot Code: 0002
    PCB Lot Code: 0000
    Firmware Version: 102a
    Hardware Revision: 0500
    Cell Revision: 0102
    Charge Information:
    Charge remaining (mAh): 4211
    Fully charged: No
    Charging: No
    Full charge capacity (mAh): 4939
    Health Information:
    Cycle count: 232
    Condition: Good
    Battery Installed: Yes
    Amperage (mA): 0
    Voltage (mV): 12158
    System Power Settings:
    AC Power:
    System Sleep Timer (Minutes): 0
    Disk Sleep Timer (Minutes): 10
    Display Sleep Timer (Minutes): 20
    Automatic Restart On Power Loss: No
    Wake On AC Change: No
    Wake On Clamshell Open: Yes
    Wake On LAN: Yes
    Display Sleep Uses Dim: Yes
    Battery Power:
    System Sleep Timer (Minutes): 5
    Disk Sleep Timer (Minutes): 10
    Display Sleep Timer (Minutes): 1
    Wake On AC Change: No
    Wake On Clamshell Open: Yes
    Display Sleep Uses Dim: Yes
    Reduce Brightness: Yes
    Hardware Configuration:
    UPS Installed: No
    AC Charger Information:
    Connected: Yes
    Charging: No

    Do you think it is software. It will not even boot when the power is not connected. I was thinking it was a problems with ACPI in the EFI BIOS. The strange thing is just a moment ago the magsafe went orange and the power states calculating. This is the first time I've seen the magsafe orange since this started four days ago. I came back to this thread to update it with this little tidbit and saw your reply.
    This is my current power information from system profiler:
    Battery Information:
    Model Information:
    Serial Number: DP-ASMB016-3738-3b2a
    Manufacturer: DP
    Device name: ASMB016
    Pack Lot Code: 0002
    PCB Lot Code: 0000
    Firmware Version: 102a
    Hardware Revision: 0500
    Cell Revision: 0102
    Charge Information:
    Charge remaining (mAh): 4199
    Fully charged: No
    Charging: Yes
    Full charge capacity (mAh): 4939
    Health Information:
    Cycle count: 232
    Condition: Good
    Battery Installed: Yes
    Amperage (mA): 0
    Voltage (mV): 12148
    System Power Settings:
    AC Power:
    System Sleep Timer (Minutes): 0
    Disk Sleep Timer (Minutes): 10
    Display Sleep Timer (Minutes): 20
    Automatic Restart On Power Loss: No
    Wake On AC Change: No
    Wake On Clamshell Open: Yes
    Wake On LAN: Yes
    Display Sleep Uses Dim: Yes
    Battery Power:
    System Sleep Timer (Minutes): 5
    Disk Sleep Timer (Minutes): 10
    Display Sleep Timer (Minutes): 1
    Wake On AC Change: No
    Wake On Clamshell Open: Yes
    Display Sleep Uses Dim: Yes
    Reduce Brightness: Yes
    Hardware Configuration:
    UPS Installed: No
    AC Charger Information:
    Connected: Yes
    Charging: Yes

  • After an upgrade from Power mac G5 to iMac and PS will not run... Error - 150:30.  Seems to be a Licensing issue.  Any ideas? Works fine on the old Powermac...

    Delighted with the new iMac but I have had an old version of CS4 for years now and it will not run on the new machine.  I have tried Adobe customer care chat but it seems that nobody is available right now.  Can anyone help?

    I cannot locate the Flexnet folder by the way.... and the License recovery tool tells me that ....
    You can’t open the application “LicenseRecoveryLauncher” because PowerPC applications are no longer supported.
    Where do I go from here please?

  • After refomatting HDD, reinstalling Vista plus service packs, recovering files from Microsoft backup and installing new copy of Firefox 3.6, Firefox will not run. Have deleted all old M0zilla profile folders and reinstalled Firefox again to no avail.

    After computer would not boot and could not be repaired, I reformatted the HDD, reinstalled Vista plus all service packs and updates, recovered files from Microsoft backup and installed new copy of Firefox 3.6. Firefox will not run.
    I have deleted all old M0zilla profile folders and reinstalled Firefox again to no avail.
    After intallation was completed, the automatic startup just placed a small box on the screen "Import wiz". This just sat there with no activity. After I closed this box, none of the Firefox start buttons would open the program -- just the blue rotating icon for about 2 seconds then nothing.

    Hi,
    Please try to rebuil the WMI repository.
    For detailed information, please refer to the blog below,
    http://blogs.technet.com/b/askperf/archive/2009/04/13/wmi-rebuilding-the-wmi-repository.aspx
    If issue persists, due to sfc doesn't work, could you try to repair your system with the installation disk?
    Best Regards.
    Steven Lee
    TechNet Community Support

  • I just downloaded more themes from Apple for my iDVD.  Now the iDVD will not run.  How do I fix this?

    I just downloaded more themes from Apple for my iDVD.  Now the iDVD will not run.  How do I fix this?

    Where from Apple did you download them?  What happens when you try to launch iDVD?
    OT

  • Any update from 3.6 will not run

    Any installed update from
    3.6.3 will not run.
    Is not shown on program list but exe file shown in task manager

    OK. Try this:
    1. Delete the taskbar icon by right clicking it and selecting "unpin this program from taskbar."
    2. Click the Start button. Click All Programs and find "Adobe Lightroom 3.6 . . ." This should show up near the top of the program list.
    3. First, left click this item to be sure it works to open the program. [If not, I'm out of ideas and you may have to re-install Lightroom.] If it does work, close Lightroom (once it has opened).
    4. Click the start button and locate Lightroom 3.6 again. This time, Right-click this item - holding down the right mouse button - and drag it to an open area of the taskbar. You should see a prompt to "Pin this Program to Taskbar." If so, release the mouse button, and the new icon will appear on the taskbar. Try clicking this icon normally and LR should open for you,
    DJB

  • TS3212 Just attempted to download current update of Itunes into my HP windows 7 computer. I've never had trouble before but now it will not run. Runtime Error R6034 an app has make an attempt to load the C runtime library incorrectly. Itunes Error 7

    Just attempted to download current update of Itunes into my HP computer with Windows 7. I've never had trouble before but now it will not run. Runtime Error R6034 an app has make an attempt to load the C runtime library incorrectly. Itunes Error 7

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99714)

  • How do I import multi-level bookmarks from IE 8 to FireFox 17 if IE 8 is broken, cannot re-install it, and will not run?

    IE 8 is still installed, but will not run. I cannot install any version of IE--I tried. I can import only first level bookmarks. Solutions in forum assume a working IE 8.

    If you have problems with importing the IE Favorites in Firefox then export the favorites in IE to an HTML file and import that file in the Firefox Bookmarks Manager.
    If you do not have the menu bar in IE then right-click the toolbar at the top to enable the Menu Bar.
    * Export the favorites in IE to an HTML file (bookmarks.html):<br>File > Import and Export
    * Import the HTML file in Firefox:<br>Bookmarks > Show All Bookmarks > Import & Backup > Import Bookmarks from HTML: From File
    See "Import from another browser" and "Import from file":
    * http://kb.mozillazine.org/Import_bookmarks

  • After upgrading to os josemite cs4 applications will not run. Message displayed that I need to install the legacy java SE 6 runtime. Is this necessary to fix the application loading?

    after upgrading to os josemite cs4 applications will not run. Message displayed that I need to install the legacy java SE 6 runtime. Is this necessary to fix the application loading?

    Found the answer:
    Java for OS X 2014-001 includes installation improvements, and supersedes all previous versions of Java for OS X. This package installs the same version of Java 6 included in Java for OS X 2013-005.
    installed above and it now works
    Blessings

Maybe you are looking for