Loaded in os4 now ipod does not work

loaded in os4 to my iphone 3gs and now the ipod function does not work.any suggestions?

That was happening to me as well.... it would open up for a couple seconds and then close out before I could do anything.
I resynced it and it started working again.
It happened to me after I downloaded an album to my phone, so I'm worried to try downloading another one

Similar Messages

  • Moved iTunes Libary Now iPod does not work

    I recently moved my iTunes library to an external hard disk.
    Now my ipod does work. Do I need to restore it? Thanks.

    Does not work at all or were the songs/files just deleted from the iPod?
    Not sure what the problem was but you might want to sync again iTunes with the files at the new location.

  • Ipod does not work with new usb

    i got my computer cleaned and a usb 2.0 pci card put in and now my ipod does not work with it, can anyone help

    tell me what you mean and i will tell. i ask the guy in the shop to remove any viruses and put my files in order and also put winzip on, ad-ware se peronal and windows defender. and to install a usb2.0 pci card, so that i can put music onto my ipod faster. is this enough for you

  • Why while in Bridge Load Files into photoshop Layers does not work?

    In Bridge, Tools>Photoshop>Load Files into Photoshop Layers does not work.  I have two images selected and when I execute that comman in Bridge nothing happens.  I exited and restarted both PS and Bridge and still nothing.  I am working in Windows 7 and Photoshop cs6.

    No I tried File/scripts/load file into stack and still did not work.
    There was an update to bridge and now it works.  Thanks so much.

  • Tried to run ios5 upgrade, get unkown error 0xE8000065 and now ipad does not work at all and is frozen can not even switch off

    tried to run ios5 upgrade, get unkown error 0xE8000065 and now ipad does not work at all and is frozen can not even switch off

    Try a hard reset and go from there. You might try a manual install (using DFU Mode), as outlined in the link below.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

  • Downloaded Update Software now Ipod is not working - Please Help

    I downloaded Update Software onto Ipod and now Ipod is not working. It is stating "Itunes detected an Ipod in recovery mode. You must restore this ipod before it can be used in Itunes". Here's the deal I did that now the Ipod just blinks the circle with the line through it and says do not disconnect. Nothing happens. Has the new software corrupted my Ipod? Can anyone Help

    Try the instructions here.
    iPod is in recovery mode.
    Message was edited by: Jeff Bryan

  • ILife 06 update now iPod does not sync

    Folks,
    agter upgrading to iLife 06 the update of my iPod does not work. I get the message that iTunes cannot write or read to this disk.
    I had iTunes 6.02 before the update and everything worked fine.
    IPod is an 60GB photo with newesr firmware.
    Thanks
    Oliver

    You may have an Ownership & Permissions problem on your iPod.
    Select your iPod on the desktop and Get Info (command-I).
    Set the permissions to 'You can Read & Write'. Expand 'Details:' and click 'Apply to enclosed items...'.
    Tick the checkbox 'Ignore ownership on this volume'.
    If your iPod does not show up on the desktop, you have to 'Enable disk use' in Prefernces>iPod (iTunes preferences)
    Hope this helps.
    M

  • Prompted to update iTunes today and now it does not work.  tried reinstalling and caanot successfully reinstall.

    prompted to update iTunes today and now it does not work.  tried reinstalling and caanot successfully reinstall.

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • In the context of restoring a drive from a backup, i copied /etc/sudoers from my backup. Now it does not work due to the permissions not being correct (even though it was copied via sudo cp -rp)

    In the context of restoring a drive from a backup, i copied /etc/sudoers from my backup. Now it does not work due to the permissions not being correct (even though it was copied via sudo cp -rp)

    Most likely you have Office 2004 which are PPC-only applications and will not work in Lion. Upgrade to Office 2011. Other alternatives are:
    Apple's iWork suite (Pages, Numbers, and Keynote.)
    Open Office (Office 2007-like suite compatible with OS X.)
    NeoOffice (similar to Open Office.)
    LibreOffice (a new direction for the Open Office suite.)

  • TS3367 Hi, the FaceTime just did not work between my mom and I. It used to work weeks ago, but now it does not work after showing"connecting". I feel frustrated and try all the method I can think of. Still do not work. Hope u can help me. Thanks!

    Hi, the FaceTime just did not work between my mom and I. It used to work weeks ago, but now it does not work after showing"connecting". I feel frustrated and try all the method I can think of. Still do not work. Hope u can help me. Thanks!

    Was it just this one time?  Could be that you, or your mom, were experiencing network problems.  Try again at a later time.

  • I have a WRT54G v8.1. I upgraded the firmware, and now it DOES NOT WORK.

    I have a WRT54G v8.1. I upgraded the firmware, and now it DOES NOT WORK.  It keeps telling me that this router is not supported.  There is no firmware to roll back to.  It worked fine until a power outage.  HELP!

    If your Internet Service Provider is Cable follow this link to configure the router.
    If your Internet Service Provider is DSL follow this link to configure the router.

  • HT3180 In the middle of the updating, iTV was unplugged. Now it does not work at all. Do you have experience, what to do now?

    In the middle of the updating, iTV was unplugged. Now it does not work at all. Do you have experience, what to do now?

    Ouch.  I am afriad the news is not good.  If there is no longer a working firmware instance on ATV there is nothing you can do.  That's why it has that message about not unplugging it during the update.
    Nothing happens when you plug it in?

  • I have updated ITunes and now it does not work

    I have updated ITunes and now it does not work. It worked before the update was installed, now it doesn't. I cannot un install it either...

    Use this application to uninstall iTunes and all related components
    http://support.microsoft.com/mats/program_install_and_uninstall/en-us

  • I HAVE EARLIER PREPARED WINDOWS REPAIR DISC, NOW IT DOES NOT WORK

    140525
    I HAVE WINDOWS 7  ULTIMATE VERSION- 32 BIT
    I HAVE EARLIER PREPARED MANY  " WINDOWS REPAIR DISC" FROM TIME TO TIME AS A PROTECTION ON THIS VERY LAPTOP AND OS.
    NOW IT DOES NOT WORK AND GIVE ERROR CODE -- 0XC00AA0301.
    I TRIED SEVERAL TIMES AND WASTED QUITE A FEW DVD'S.
    CAN YOU GUIDE?
    REPLY ON [email protected]
    HOPE TO RECEIVE HELP.
    GJDMBH

    Once downloaded the Window7 setup you then want to download the windows free burning app from the same thread.
    Also visit the Microsoft website link below as has basic guidance that may help you.
    http://www.microsoftstore.com/store/msusa/html/pbP​age.Help_Win7_usbdvd_dwnTool
    Basically with the Windows free burning app you can make either a USB boot stick media of windows 7 or a good older fashioned DVD boot media. Just follow instructions & see how you go, if get stuck come back to this thread & post details on your issue - hopefully myself or other members will be able assist you further if needed.
    Like my post? Click Kudos (thumb+) to show appreciation.

  • After sending sound from find my iphone, now ipad does not work

    after sending sound from find my iphone, now ipad does not work
    it can't be unlock and scrren is blank, only siri works

    Try a reset: hold down the home button along with the sleep/wake button until you see the apple, then let go.

Maybe you are looking for

  • Error while Provisioning a user to Exchange:Configuration OIM 9.1 & JBOSS

    Hi, I am facing the below error while provisioning a user to Exchange. The Resource gets provisioned. But inside the resource, two tasks (Create User & Set Mailbox) are rejected. When i retry these tasks, the Resource status is set to Revoked in the

  • Path Selection Color

    Hello!  Is there anyway instead of the light gray color of the paths, can we make it another color so its seen better?  Especially using the pen tool and the quick selection tool, thanks!

  • Opening Adobe Bridge CC on a Windows 7 OS.

    I cannot get Adobe Bridge CC to open on a Windows 7 OS. I have found a discussion on this that gives a solution for the Mac, but not Windows. Any suggestions?

  • 2 Different Partition Map Scheme's for one external hard drive

    Is it possible to have one external hard drive with 2 different Partition Map Scheme's? One of them will be used to externally boot tiger on a powerpc, and the other for use on my macbook pro?

  • Ons.log getting too many and too large

    Hi, Just recently when I tried to connect to our staging database I found that I couldn't connect and it gave me the "disk is full" error. It was quite amazing because the archive logs were not large nor were their any backups on it. And it was a 200