Loaded .iso file, big mistake?

As I was out of blank media/no large enough flash drive, I loaded an .iso file into my 'notes' folder and now I cannot get my ipod to sync up and open with iTunes, or play/access any files. When I go into the 'Notes' folder or try to access a song/podcast, the ipod freezes. Is there anything I can do short of going to an Apple store?

Try resetting it while it is connected to your computer and see if Windows recognizes it. If you can see it in Device Manager right click on it, select Disk Management and then format.
If you don't want to attempt this make a Genius Bar appointment.

Similar Messages

USing FTP to load ISO files

dear community memebers,
i am using VMware to try oracle VM. i was using FTP to upload an ISO File of enterprise linux through the VM manager console, my problem is that the speed is too low since the system is using the internet to upload the file to the vmware server.
I know it might not be related to oracle VM but i thought that may be someone have faced the same problem

Alison,
you said we can download ISO files into Oracle vm server. how we can download ISO files. I couldn't see any browser(IE or FIREFOX) in my environment.
my virtural environment is followings;
I installed oracle vm server on vmware workstation 6.
I am following oracle instructions "Installing and Configuring Oracle Enterprise Linux 5 with Oracle Database 11g Release 1 as a Paravirtualized Machine (PVM) on an Oracle VM Server"
after installation of vm server, how we can import oracle linux 5 iso files..
would you help me?
thanks

Windows 10 64 Bit .iso file won't load.

I have recently downloaded Windows 10, and because I had 32 bit before on Windows 7 it upgraded to Windows 10 32 Bit. I got some new hardware all capable of 64 Bit,
but I can't get the Windows 10 64 Bit .iso file to load. Isn't the mount feature supposed to make it so you don't have to burn it on to a disk. Well I did that and when I click the setup it says, this app can't run on your PC. Any help?

Make sure your computer is compatible:
For 64-bit installations of Windows 10 Enterprise Technical Preview, a small number of older PCs will be blocked from installing the preview because they don't support CMPXCHG16b,
PrefetchW, and LAHF/SAHF.
You can not install 64 bit from a 32bit installtion.
You may want to try a USB key: http://www.microsoft.com/en-us/download/windows-usb-dvd-download-tool

Switched from Mac to PC - why doesn't PP load quicktime files?

I switched to the dark side - I know - could have been a big mistake, but I can't afford a Mac Trash Can so I build PC, loaded it up and moved a fairly simple PPro project into it and loaded it up. Half the Quicktimes won't relink giving me errors that there is no audio or video stream. Others load in as audio only files so the linking fails.
Any clue how to fix this Quicktime issue?
I have installed QT Pro and its up to date.
thanks, Rusty

MOV is a wrapper, what is inside YOUR wrapper - Exactly what is INSIDE the video you are editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
https://forums.adobe.com/thread/1070933 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

Loading jar files at execution time via URLClassLoader

Hello�All,
I'm�making�a�Java�SQL�Client.�I�have�practicaly�all�basic�work�done,�now�I'm�trying�to�improve�it.
One�thing�I�want�it�to�do�is�to�allow�the�user�to�specify�new�drivers�and�to�use�them�to�make�new�connections.�To�do�this�I�have�this�class:�
public�class�DriverFinder�extends�URLClassLoader{
��private�JarFile�jarFile�=�null;
��
��private�Vector�drivers�=�new�Vector();
��
��public�DriverFinder(String�jarName)�throws�Exception{
��super(new�URL[]{�new�URL("jar",�"",�"file:"�+�new�File(jarName).getAbsolutePath()�+"!/")�},�ClassLoader.getSystemClassLoader());
��jarFile�=�new�JarFile(new�File(jarName));
��
��/*
��System.out.println("-->"�+�System.getProperty("java.class.path"));
��System.setProperty("java.class.path",�System.getProperty("java.class.path")+File.pathSeparator+jarName);
��System.out.println("-->"�+�System.getProperty("java.class.path"));
��*/
��
��Enumeration�enumeration�=�jarFile.entries();
��while(enumeration.hasMoreElements()){
��String�className�=�((ZipEntry)enumeration.nextElement()).getName();
��if(className.endsWith(".class")){
��className�=�className.substring(0,�className.length()-6);
��if(className.indexOf("Driver")!=-1)System.out.println(className);
��
��try{
��Class�classe�=�loadClass(className,�true);
��Class[]�interfaces�=�classe.getInterfaces();
��for(int�i=0;�i<interfaces.length;�i++){
��if(interfaces.getName().equals("java.sql.Driver")){
��drivers.add(classe);
��}
��}
��Class�superclasse�=�classe.getSuperclass();
��interfaces�=�superclasse.getInterfaces();
��for(int�i=0;�i<interfaces.length;�i++){
��if(interfaces[i].getName().equals("java.sql.Driver")){
��drivers.add(classe);
��}
��}
��}catch(NoClassDefFoundError�e){
��}catch(Exception�e){}
��}
��}
��}
��
��public�Enumeration�getDrivers(){
��return�drivers.elements();
��}
��
��public�String�getJarFileName(){
��return�jarFile.getName();
��}
��
��public�static�void�main(String[]�args)�throws�Exception{
��DriverFinder�df�=�new�DriverFinder("D:/Classes/db2java.zip");
��System.out.println("jar:�"�+�df.getJarFileName());
��Enumeration�enumeration�=�df.getDrivers();
��while(enumeration.hasMoreElements()){
��Class�classe�=�(Class)enumeration.nextElement();
��System.out.println(classe.getName());
��}
��}
It�loads�a�jar�and�searches�it�looking�for�drivers�(classes�implementing�directly�or�indirectly�interface�java.sql.Driver)�At�the�end�of�the�execution�I�have�found�all�drivers�in�the�jar�file.
The�main�application�loads�jar�files�from�an�XML�file�and�instantiates�one�DriverFinder�for�each�jar�file.�The�problem�is�at�execution�time,�it�finds�the�drivers�and�i�think�loads�it�by�issuing�this�statement�(Class�classe�=�loadClass(className,�true);),�but�what�i�think�is�not�what�is�happening...�the�execution�of�my�code�throws�this�exception
java.lang.ClassNotFoundException:�com.ibm.as400.access.AS400JDBCDriver
��at�java.net.URLClassLoader$1.run(URLClassLoader.java:198)
��at�java.security.AccessController.doPrivileged(Native�Method)
��at�java.net.URLClassLoader.findClass(URLClassLoader.java:186)
��at�java.lang.ClassLoader.loadClass(ClassLoader.java:299)
��at�sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:265)
��at�java.lang.ClassLoader.loadClass(ClassLoader.java:255)
��at�java.lang.ClassLoader.loadClassInternal(ClassLoader.java:315)
��at�java.lang.Class.forName0(Native�Method)
��at�java.lang.Class.forName(Class.java:140)
��at�com.marmots.database.DB.<init>(DB.java:44)
��at�com.marmots.dbreplicator.DBReplicatorConfigHelper.carregaConfiguracio(DBReplicatorConfigHelper.java:296)
��at�com.marmots.dbreplicator.DBReplicatorConfigHelper.<init>(DBReplicatorConfigHelper.java:74)
��at�com.marmots.dbreplicator.DBReplicatorAdmin.<init>(DBReplicatorAdmin.java:115)
��at�com.marmots.dbreplicator.DBReplicatorAdmin.main(DBReplicatorAdmin.java:93)
Driver�file�is�not�in�the�classpath�!!!�
I�have�tried�also�(as�you�can�see�in�comented�lines)�to�update�System�property�java.class.path�by�adding�the�path�to�the�jar�but�neither...
I'm�sure�I'm�making�a/some�mistake/s...�can�you�help�me?
Thanks�in�advice,
(if�there�is�some�incorrect�word�or�expression�excuse�me)

Sorry i have tried to format the code, but it has changed to �... sorry read this one...
Hello All,
I'm making a Java SQL Client. I have practicaly all basic work done, now I'm trying to improve it.
One thing I want it to do is to allow the user to specify new drivers and to use them to make new connections. To do this I have this class:
public class DriverFinder extends URLClassLoader{
private JarFile jarFile = null;
private Vector drivers = new Vector();
public DriverFinder(String jarName) throws Exception{
super(new URL[]{ new URL("jar", "", "file:" + new File(jarName).getAbsolutePath() +"!/") }, ClassLoader.getSystemClassLoader());
jarFile = new JarFile(new File(jarName));
System.out.println("-->" + System.getProperty("java.class.path"));
System.setProperty("java.class.path", System.getProperty("java.class.path")+File.pathSeparator+jarName);
System.out.println("-->" + System.getProperty("java.class.path"));
Enumeration enumeration = jarFile.entries();
while(enumeration.hasMoreElements()){
String className = ((ZipEntry)enumeration.nextElement()).getName();
if(className.endsWith(".class")){
className = className.substring(0, className.length()-6);
if(className.indexOf("Driver")!=-1)System.out.println(className);
try{
Class classe = loadClass(className, true);
Class[] interfaces = classe.getInterfaces();
for(int i=0; i<interfaces.length; i++){
if(interfaces.getName().equals("java.sql.Driver")){
drivers.add(classe);
Class superclasse = classe.getSuperclass();
interfaces = superclasse.getInterfaces();
for(int i=0; i<interfaces.length; i++){
if(interfaces[i].getName().equals("java.sql.Driver")){
drivers.add(classe);
}catch(NoClassDefFoundError e){
}catch(Exception e){}
public Enumeration getDrivers(){
return drivers.elements();
public String getJarFileName(){
return jarFile.getName();
public static void main(String[] args) throws Exception{
DriverFinder df = new DriverFinder("D:/Classes/db2java.zip");
System.out.println("jar: " + df.getJarFileName());
Enumeration enumeration = df.getDrivers();
while(enumeration.hasMoreElements()){
Class classe = (Class)enumeration.nextElement();
System.out.println(classe.getName());
It loads a jar and searches it looking for drivers (classes implementing directly or indirectly interface java.sql.Driver) At the end of the execution I have found all drivers in the jar file.
The main application loads jar files from an XML file and instantiates one DriverFinder for each jar file. The problem is at execution time, it finds the drivers and i think loads it by issuing this statement (Class classe = loadClass(className, true);), but what i think is not what is happening... the execution of my code throws this exception
java.lang.ClassNotFoundException: com.ibm.as400.access.AS400JDBCDriver
at java.net.URLClassLoader$1.run(URLClassLoader.java:198)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:186)
at java.lang.ClassLoader.loadClass(ClassLoader.java:299)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:265)
at java.lang.ClassLoader.loadClass(ClassLoader.java:255)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:315)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:140)
at com.marmots.database.DB.<init>(DB.java:44)
at com.marmots.dbreplicator.DBReplicatorConfigHelper.carregaConfiguracio(DBReplicatorConfigHelper.java:296)
at com.marmots.dbreplicator.DBReplicatorConfigHelper.<init>(DBReplicatorConfigHelper.java:74)
at com.marmots.dbreplicator.DBReplicatorAdmin.<init>(DBReplicatorAdmin.java:115)
at com.marmots.dbreplicator.DBReplicatorAdmin.main(DBReplicatorAdmin.java:93)
Driver file is not in the classpath !!!
I have tried also (as you can see in comented lines) to update System property java.class.path by adding the path to the jar but neither...
I'm sure I'm making a/some mistake/s... can you help me?
Thanks in advice,
(if there is some incorrect word or expression excuse me)

Download tool part of iso files?

I have a 2 year old 640 gig dv7 laptop and I received the imminent "hard disk failure" message. So, I backed up the hard drive (8 dvds) and made recovery disks (6 dvds). I bought a new Seagate hard drive of 500 gigs and installed it. I then started the recovery process.
I then received a message that said my new hard disk was smaller than the original and to not continue. I did try four different installs with no success, getting a blank screen except for the hp logo on the center of the screen and a press esc for menu.
I have read the advice of trying the iso file download via either dvd or usb. My question is: the directions talk about using the w7 dvd/usb download tool. Is this download tool part of the iso files? How do I get it onto my computer first? I know it's probably simple, but it would be nice for me to get that clarified before doing the downloads.
Thx.
This question was solved.
View Solution.

Hi,
As the error you're encountering is just due to the fact that Recovery Discs will not install correctly on a drive smaller than the one they were created on, I would just burn the correct ISO to a blank DVD and use this to perform the installation - there's no need to create a bootable USB drive unless you have a problem with the optical drive on your notebook.
Before trying the following, make sure you can still read the 25 Character Product Activation key on your Windows COA label ( 5 blocks of 5 alpha/numeric sets ).
An example of a COA Label can be seen Here.
You can create an installation disc yourself using another PC - just download the correct Disc Image ( this must be the exact same version that originally came with your notebook ) from the link below and use an application such as ImgBurn to burn the ISO correctly to a blank DVD - a guide on using ImgBurn to write an ISO to a disc is Here. These Images are clean and from a well-respected source, however there are only limited versions available.
Windows-7 sp1-iso-official-32-bit-and-64-bit
Use the disc to perform the installation, enter the Windows activation key found on the COA Label when requested and when the installation has completed, use the 'Phone Method' detailed in the link below to activate the OS - this method supported by Microsoft and is popular with people who just want a clean installation of Windows 7 without the additional software load normally bundled with OEM installations.
http://www.kodyaz.com/articles/how-to-activate-windows-7-by-phone.aspx
Any additional drivers and software you may need can be found by entering your full Model No. or Product No. Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

I was migrating from a 3gs to the 4s. Big mistake. Have lost contacts and access to music and apps.

I was migrating from a 3gs to the 4s. Having never upgraded the IOS before, I thought that I should do that before handed the phone down to my daughter to replace her broken 3g. Big mistake. Even using Google sync for my contacts, following instruction from the Google webpage (ambiguous: cancel or not when error message is displayed?) the contacts did not sync to gmail. iTunes says it will sync contacts, but doesn't from the phone, only from the few that were in my old Gmail account. The iCloud set up asks for email and a new password- not specifying that you should use your old email and password for your old iTunes account or your phone will be instantly locked out of those apps and tunes stored there. The web info says you can't merge accounts or passwords, so, I bet I have to cancel the new set up and start over with the old password if it will even let me. I've spent 8 hrs reading, syncing, et c., on this! It will be a long time before I casually buy a new phone from them! I wonder how much time it will take to switch from the 3GS to the 4S? I now have a 3GS without contacts, no way to get the data from those files back, and can't get the apps to it or the 4S until Apple support helps fix the double identity problem.
Considering that I had verbal instructions from the Apple store prior to the IOS upgrade, reviewed all the details on line, I think this process is woefully lacking in clarity and transparency. The local ATT branch offered nothing except backing up to avoid loss of contacts if both phones were taken to the store, but not any help with the IOS or iTunes content. Cable internet for the 3GS backup and IOS 5 upgrade seemed to take about 2 hours. At least calender, notes, etc. were done correctly and 2500 picture and videos were not removed.

After the last post,I went to the local ATT for some feedback. The manager there, Stephen, was helpful and spent a long time, even after i had gotten the abbreviated list of contacts I had constructed from the 3GS to the 4S by an iTunes sync with the correct options selected. This however, would not sync notes. I took screen pix of my many stock symbols for future reference, and got them to transfer with Bump (as photos, in case I want to refresh my memory on some of the symbols added previously). I emailed myself copies of 28 notes i did not want to lose, because the iCloud back up would not initially work. After what seemed like years, I finally was able to get it working, following repeated refusal to Merge because of "not enough space available" @5GB even though everything was turned off except contacts and calendar.
My old phone is finally backed up to the cloud after I turned off location service on new phone, and a bunch of apps and photo data showed up for the first time, as icons to be turned off on the old phone in the Manage Storage window. It said it was going to back up 8 GB of photos when the photo backup had been turned off on the prior screen. (The screws are loose, and the worm has turned on this software at Apple.)
Backup for notes, a few contacts, and calendar, over high speed wifi, took 25 minutes to complete without photos.
I have never seen anything this troublesome in the Apple OS!
You will need to set your own Apple ID and a .me email ID if you want to use the cloud. My recommendation and that of the store manager for the first time is don't back up any photos, let it erase the photo stream if it wants to. The camera roll should be ok.
Backing up to the iCloud removed all my stocks from the old phone! It wasn't supposed to. Be sure to select leave data on phone at every opportunity- even so, there they went. It did not remove contacts or calendar when backing up, though the IOS 5 upgrade had lost my years of contacts since I had not specified that they should be saved when I hit the simple sync in iTunes the first time and since Googlesync failed to connect properly for me over wifi as noted above.
All in all it appears nothing is going to clone your phone or preserve all the data through a IOS 4.x to 5 migration, though I did not do it right the first time with iTunes, and complicated matters by starting with a new ID instead of my old iTunes account and password, living in a small town, away from any Apple store, though if you can't be there at an Apple store with both phones in hand, they probably can't help much unless they walk you through each option in iTunes and you are very attentive. The store genius I saw did not do this, though I had yet to order the phone at that point.
Good Luck!
Message was edited by: richardfromel dorado

How to load a file with out specifying its absolute location

Hi,
I'm having some config files in a specific location. I'm setting that folder path to the CLASSPATH and trying access those file just by giving its name.
For eg: contents are in e:\config folder
I set e:\config to CLASSPATH
and trying to load the file which is in the above said folder.
using getResourceAsStream(filename).
The above approach is working in certain cases, but not working when i try to do in a class which under a big package structure.
Can someone help me out, the reason for this unexpected behaviour.
Please do suggest me, if u know some work-around for this problem.
Thnaks in advance,
Chandrasekhar

Hi,
Thank you. I tried by adding a forward slash, it started working.
But I still have one doubt, when the program is within the package structure, then we have to give forward slash, where as if the program doesn't have any pkg structure we have to give only the file name without prefixing the slash.
Any idea, why is it so ??
Is it bcz, that getOutputAsStream() will prepend the package names, if forward slash is not given. Even if this is true, why providing a forward slash in a program with no packages doesn't work ?

Using a .iso File for Installing Windows

Before you get any ideas- I DID purchase Windows legally. The disk wouldn't work/load in my computer for some odd reason, but I wrote a .iso file of it, and that seems to work.
I can't find a way to use a .iso in Boot Camp Assistant. I burned a disc out of the .iso, but I can't find "Start Installation." Assistance? Thanks so much!

From earlier thread:
We had to download a free iso burning program for Mac (we used SimplyBurns Mac). That program runs you through the necessary steps to properly burn the iso file you need. After doing so, Bootcamp recognized the installation file and everything worked as it should.
https://discussions.apple.com/thread/3410900?start=45&tstart=0
http://simplyburns.en.softonic.com/mac

Hyper-V 2012 Gen 2 VM SCSI DVD device fails to boot from iso files

I am running Server 2012 R2 in Hyper-V Server role for my home lab. I am trying to create a gen 2 vm, with Server 2012 R2 iso loaded in the SCSI DVD device, but every time I try to start the vm it fails to start with the following error:
This is the current settings for the vm:
This error occurs with any iso file loaded into the SCSI DVD device, and the error occurs even if creating a new vm from scratch. I have seen several similar gen 2 vm boot issues posted, but none with the exact issue that I'm having. The iso files all
work fine when creating a gen 1 vm.

Hi Kaedron,
Maybe the UEFI files is broken and you need to download a new ISO to retry .
Here is a download link for windows server 2012 R2 evaluation :
http://technet.microsoft.com/en-us/evalcenter/dn205286.aspx
Hope this helps
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Loading XML file from classpath...

Hello all.
Can anyone help me with loading an XML file from the classpath?
The XML I need to load looks like this:
<?xml version="1.0" encoding="ISO-8859-1"?>
<QueueDispatcher>
<QueueConfigEntry>
    <DataSource>
      <TableName><![CDATA[WPOrder]]></TableName>
    </DataSource>
    <DataSink>
      <JMSQueueName><![CDATA[OTL_WPORDER]]></JMSQueueName>
    </DataSink>
</QueueConfigEntry>
</QueueDispatcher>I'm trying to load the file with the following code:
TransformerFactory transformerFactory = TransformerFactory.newInstance();
InputStream input = this.getClass().getResourceAsStream("/QueueDispatcherConfig.xml");
StreamSource streamSource = new StreamSource(input);
Transformer transformer = transformerFactory.newTransformer(streamSource);
....All I get at the moment is an exception:
javax.xml.transform.TransformerException: stylesheet requires attribute: version
Any ideas what I'm doing wrong?
Thanks in advance

What are you doing wrong? You're using a Transformer, which expects to be given an XSLT document. If you want to make a DOM from that then you should use a DocumentBuilder, or you could use a SAXParser if you just want to extract the data from the XML file as you read it.

I have just updated the software on my pad to ios7. Big mistake. It is ugly and unpleasant to use. Also, on safari there are icons which I have no wish to use, but can't get rid of. Can I revert to the previous operating system?

I have just updated the operating system on my ipad2 to iso7. Big mistake. It is ugly and unpleasant to use, and the Safari element comes loaded with icons I will not be using, but can't seem to get rid of. Does anybody know how to change the operating system back to the previous one?
Thanks.

Firstly, the icons when you load safari are your bookmarks in the favourite section. To remove them you can simply either delete them or move them to another bookmark folder. To access your bookmarks tap the blue book in the top right corner and then go through to bookmarks and select and edit from there, goodluck :)

Xm create doesn't create required files, when creating vm from ISO file

Greetings,
I've created a virtual machine, but it won't start (blocked).
img file:
/srv/OL-DB2-PRI/OL-DB2-PRI.img
config file:
import os, re
arch = os.uname() [4]
kernel = "hvmloader"
builder='hvm'
memory = 10240
name = "OL-DB2-PRI"
cpus = "" # leave to Xen to pick
vcpus = 4
disk = [ 'file:/srv/OL-DB2-PRI/OL-DB2-PRI.img,xvda,w', 'file:/media/usb/extraISOs/OL6_64_1.iso,xvdc:cdrom,r' ]
vfb = [ 'vnc=1,vnclisten=0.0.0.0,vncdisplay=1,vncpasswd=Welkom_01' ]
root = "/dev/hda1 ro"
extra = "4"
on_poweroff = 'destroy'
on_reboot = 'restart'
on_crash = 'restart'
boot="dc"
xm list :
[root@OVS-PRI xen]# xm list
Name ID Mem VCPUs State Time(s)
Domain-0 0 832 8 r----- 547.4
OL-DB2-PRI 7 10240 4 -b---- 6.8
The log shows, xen is trying to watch files or directories that don't exsist:
xs_read(/local/domain/0/device-model/7/xen_extended_power_mgmt): read error
xs_read(/local/domain/7/log-throttling): read error
Am I using odd parameters in my config file?
The ISO file is downloaded straight from Oracle site. Which I also used to install OL6 directly.
Where else could I check?
I've created the directories manualy, but have no idea, what the files should contain.
I prefer not to use OVM Manager. To much dependancies.
Any help is appreciated.

complete qemu-dm log file:
domid: 12
Using xvda for guest's hda
Using file /dev/sda4 in read-write mode
Using xvdc for guest's hdc
Using file /media/usb/extraISOs/OL6_64_1.iso in read-only mode
Watching /local/domain/0/device-model/12/logdirty/cmd
Watching /local/domain/0/device-model/12/command
Watching /local/domain/12/cpu
qemu_map_cache_init nr_buckets = 10000 size 4194304
shared page at pfn feffd
buffered io page at pfn feffb
Guest uuid = e9775a95-847d-7256-798e-68a2678be160
Time offset set 0
populating video RAM at ff000000
mapping video RAM from ff000000
Register xen platform.
Done register platform.
platform_fixed_ioport: changed ro/rw state of ROM memory area. now is rw state.
xs_read(/local/domain/0/device-model/12/xen_extended_power_mgmt): read error
Using xvdc for guest's hdc
medium change watch on `xvdc' (index: 1): /media/usb/extraISOs/OL6_64_1.iso
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
Log-dirty: no command yet.
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
vcpu-set: watch node error.
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
xs_read(/local/domain/12/log-throttling): read error
qemu: ignoring not-understood drive `/local/domain/12/log-throttling'
medium change watch on `/local/domain/12/log-throttling' - unknown device, ignored
char device redirected to /dev/pts/2
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
cirrus vga map change while on lfb mode
mapping vram to f0000000 - f0400000
platform_fixed_ioport: changed ro/rw state of ROM memory area. now is rw state.
platform_fixed_ioport: changed ro/rw state of ROM memory area. now is ro state.
Unknown PV product 3 loaded in guest
PV driver build 1

Missing files big time

Hello!
It looks like i made a big mistake. I used a script which searches for disowned files and erased a lot of files in /usr/share/mime/application, image and audio folder. I thought it is not such a big deal since no package owns them. Well, then i log in in my KDE and instantly got a lot of warnings of missing files for okular and juk (and some other too - i don't remember anymore). I "fixed" that with reinstalling shared-mime-info package but now i don't have my music any more in my partition. It is not just that playlists were removed all my music is gone. I just hope that other stuff in on my partition (have yet to check but for now it looks fine). How is this possible? How removing mime files erased my music?
Thanks for any clarification!
EDIT: Actually i have somehow deleted this files on 2nd june. Don't know how by which actions i deleted them. Ouh well
Last edited by Shark (2012-06-26 12:47:51)

That's because some of them were overwritten. June 2nd was a long time ago... Whenever you delete something, it still remains on the disk until you write something over it. The next time this happens you should immediately stop everything you're doing, unmount and make a dd backup of the partition (if you can) and *then* attempt recovery.

Burning the CDs from ISO files - Solution

I have just finished burning the cd images and as I type this my little baby is coming to life! he he :-)
I did try Nero but failed misrably so I offer the following as a solution that worked for me. Apologies to anyone if it appears I'm teaching 'Grandma to suck eggs'.
First you extract the files from the zips, uncorrupted zips that is, if you are using Winzip then the contents description etc will be displayed when you hover over the zip file with the mouse pointer.
Next add the .iso file extension to each of the 3 files you have just extracted
Next you need to create a Cue sheet/file. To do this go into notepad and create 1 file as shown below and save if with .cue file extension with the respective iso file.
FILE "C:\YOURDIR\sol-8-4_01-fcs-bin-ia-v1.ISO" BINARY
TRACK 01 MODE1/2048
INDEX 01 00:00:00
POSTGAP 00:02:00
Where YOURDIR corresponds to where you have the iso file stored.
You need to create 1 cue sheet file for each of the binaries with the .iso extension changing the references shown above to match the location and the .iso filename.
I then used cdrwin to write the file images loading each of the above cue sheets. But you could use any burning software that supports cue sheets, which give it the correct information to burn the image.
Hope this helps
Skaven

I tried the skaven_1 recommendations using the latest (v5.5.9.9) version of Nero. This version of Nero supports .iso extensions. It also supports .cue files. skaven_1's sample cue sheet works in Nero.
Despite all this the resulting CDs are unreadable on my Ultra10. All of the Solaris 9 CDs I have burned are readable on my PC.
I have burned other OS ISO images (BSD, OpenBSD, etc...) using the same version of Nero and they are all bootable on x86 machines.
I have found that if the CD is not readable using:
dd if=/dev/rdsk/c0t2d0s2 bs=2048 | od -Ax -xc | less
(BTW, this is a handy way to check the volume label at 0x8000 for the disk type)
it is unlikely to be readable (and therefore bootable) at the PROM level.
All of the other OS ISO images I have burned have been readable on the Ultra10 using the above command. NONE of the Solaris 9 images I have burned have been readable using the above command. The drive will "spin" and "click" indefinitely until interrupted (^C or kill).
Having scoured this archive, I have determined that some people are successful in burning the Solaris [89] images while many others are not. There seems to be no clear understanding on what is necessary for success.
Has anyone successfully burned Solaris 9 SPARC iso images to a CD. If so what specifically did you do to achieve this incredible success!? Detailed information on:
- version
- media
- technique
- phase of the moon :-}
would be most helpful to the rest of the community.
It would be nice if someone at Sun would chime in and provide this information. The information provided at the download area is less than informative. I have followed those instructions and still have not met with success.
Sun...ARE YOU LISTENING? If people have difficulty with obtaining and successfully using these OSes, it makes it harder for startups (like I am working with) to lay the foudation to use your hardware. If this is hard, we are likely to make decisions to use other solutions. Much as we may not wish to do this, it is the reality. We have solutions to provide in a limited amout of time.

Loaded .iso file, big mistake?

Similar Messages

Maybe you are looking for