Loaded Question about Internet and Passwords

BACKGROUND ...
1. I got my aunt's MAC when she passed a few years ago. I don't know exactly when she bought it or what the model is... but i want to say she got it around 2006 or 2007.
2. I tried to set up home networking (i mean, do they even call it that anymore? i'm so behind on my tech lingo), so that i could get internet on the MAC. but i was trying to network a PC and a MAC so it wasn't as easy.
3. I couldn't get into the Internet settings to make the necessary changes to get home networking to work because those settings need a password and i couldn't find my aunts passwords
4. the MAC has been sitting up there, still operable, but no internet
5. I went to a Apple fix-it place and they told me they'd charge me $100 JUST to look at it.
QUESTION ...
There's GOT to be a way I can change the password without having to take it to a place and pay extra money to do it.
can somebody please assist me in this. and please... if there are follow up questions feel free to ask. I'm at work right now, but I can go home and get the particulars of the MAC later. I just wanna solve this issue without spending money.

Well, there is always another way. 'cause it's Unix.
Get the Mac to set up an additional administrative account. You can then change the password on your old account.
Start with your computer power off. Hold down command-s. Power on your computer.
Type in the following:
The first two commands will depend on your release of Mac OS X. Look at what is typed out in the console to determine the exact format.
# Type the follow two instructions to access the startup disk in read/write. Press return after each command.
/sbin/fsck -fy
/sbin/mount -uw /
cd /var/db
pwd
#List all files. The l is a lower case L.
ls -a
#The move command acts as a rename command in this format.
mv -i .applesetupdone .applesetupdone.old
reboot
Once you've done that the computer reboots and it's like the first time you used the machine. Your old accounts are all safe. From there you just change all other account passwords in the account preferences!!
Limnos adds detailed explainations:
http://discussions.apple.com/message.jspa?messageID=8441597#8441597
The above the idea came from a post by JoseAranda at September 9, 2006 3:48 AM
http://www.askdavetaylor.com/how_do_i_reset_my_mac_os_x_admin_root_password.html
You will need to scroll down to see this post. Search for applesetupdone
This method is mentioned in an apple support page without giving an explanation.
Once you have a new administrative account, you can change the password of your old administrative account
blue apple > System Preferences > Accounts
-- You can see that it is easy to change your administrator password. You can set a firmware password that you enter before your machine will boot.
http://support.apple.com/kb/HT1352
-- For the best data security, you should use FileVault. Create a good logon password. Define and use a good backup plan. I do not recommend using FileVault unless you really need the security because it is much harder to recover your data should you have a harddrive problem and you do not have your data backed up. data should you have a harddrive problem and you do not have your data backed up.
Here is how to change the password from the install dvd/cd
How to run reset password from your startup DVD.
Insert your startup DVD into your reader. Power down your machine. Hold down to the c key. Power on your machine. This will bootup your startup DVD.
This will bring you to a panel asking you for your language. Pick your language.
You you come to the Install Mac OS panel. Do not install.
Click on Utilities menu item. This will give you a pulldown list of utilities.
Click on Reset Password.

Similar Messages

A question about grub and USB

Hi All
I have a quick question about grub and USB that I can't quite find the answer to by searching. Most of the FAQs discuss booting a full linux dristribution from USB. My situation is this. I am getting a new computer with two drives, the second will be arch and the first will be Vista (for my wife). I want the computer to boot the same way that my wife's machine boots at work so I don't want to install grub on the MBR. So, is there a way to have all of the grub config files and kernels installed on the second drive and simply install to grub boot loader to the MBR of a USB stick? My goal would be to simply plug the USB stick into the new PC and boot arch from the second drive.
Thanks
Kev

i cant say for hp's
havent worked on any in a while
recent machines have been coupleof dell's , vaio & emachine
which dells do offer it at least the ones i tried , my laptop does(dell)
all home pc's are built by me which do offer to boot individual drives
what hp you getting it may tell in specs
are both discs sata? if so it might not offer this option with 2 drives of same interface
check your power supply alot of these preconfigured machines put cheap under reated power supplies in there
& will burn your motherboard i just replaced PS(250 watt) & mobo(845gvsr) in an emachines <cheap stuff<
i hope you researched the pc before buying ie : mobo, power supply are the biggest concerns
i find it much more benificial to build my own machine gives me peace at mind. the cost is sometimes more in $ but not always , your biggest expense is time researching hardware
if you live in usa the best places to start looking are bensbargains.net & pricewatch.com
i am not affiliated with either & niether sell the hardware they are just advertisers a place to buy
for costomized machines that i would trust is unitedmicro.com theyll asemble & test before shipping
i have gotten 2 machines so far from them with NO PROBLEMS with hardware (knock knock)
you may want to consider this in your next venture for pc

I have a Macbook Pro june 2011... I have 8GB ram but I only have 256mb VRAM... I've read some other questions about this and I realized... Why do I not have 560mb of VRAM since I have 8GB of RAM? Is there any way to get more VRAM to play games on steam?

I have a Macbook Pro june 2011... I have 8GB ram but I only have 256mb VRAM...
I've read some other questions about this and I realized... Why do I not have 560mb of VRAM since I have 8GB of RAM?
Is there any way to get more VRAM to play games on steam?
I've learned by reading other topics that I can't upgrade my graphics card on my Macbook Pro because it's soldered into the motherboard or somthing like that, but please tell me if there is any way to get more video ram by chaning some setting or upgrading something else. I'd also like to know why I only have 256MB of VRAM when I have 8GB of RAM, since I have 8GB of RAM I thought I was supposed to have 560mb of VRAM...
So the two questions are...
Is there any way to upgrade my VRAM, so that I can play games on steam?
Why do I only have 256MB VRAM when I have 8GB total RAM?
Other Info:
I have a quad core i7 Processor.
My graphcics card is the AMD Radeon HD 6490M.
I am also trying to play games on my BOOTCAMPed side of my mac, or my Windows 7 Professional side.
THANK YOU SO MUCH IF YOU CAN REPLY,
Dylan

The only two items that a user can change on a MBP are the RAM and HDD (Retinas not included). You have what the unit came with and the only way you will be able to change that is to purchase a MBP with superior graphics
If you are very much into gaming, the I suggest A PC. They are far superior for that type of application to a MBP.
Ciao.

A few questions about MacBooks and Parallels Desktop.

I have a few questions about MacBooks and Parallels Desktop.
1) I understand I need at least 1GB of RAM to run Parallels Desktop but what about the hard drive, is the stock 60GB drive big enough?
2) Related to question 1, even if it was big enough to allow me to install and run Windows would the 60GB drive be enough if I wanted to install a Linux distribution as well?
3) This has nothing to do with Parallels Desktop but thought I'd ask it here anyway, do Apple Stores carry just the stock MacBooks, or do they carry other configurations?
Thanks
Keith

1. Depend on how intensive you use that HD for saving data on both Mac OS and XP. For standard installation on both OS X and XP, the space of 60 Gb is enough.
2. Same answer as no 1. You can install all three on that HD space, but the extra spacce available will be less and less for your data. You can save your data on external or back up on cd/dvd and erase it from the HD to keep the free space.
Remember to leave at least 2 or 3 Gb for virtual memory usage.
3. Just call them, maybe they don't have it in store stock, but by appointment they might configure one for you before your pick-up date.
Good Luck

One question about Pricing and Conditions puzzle me for a long time!

One question about Pricing and Conditions puzzle me for a long time.I take one example to explain my question:
1-First,my sale order use pricing procedure RVAA01.
2-Next,the pricing procedure RVAA01 have some condition type,such as EK01(Actual Costs),PR00(Price)....,and so on.
3-Next,the condition type PR00 define the Access Sequences PR00 as it's Access Sequences.
4-Next,the Access Sequences PR00 have some Condition tables,such as:
     table 118 : "Empties" Prices (Material-Dependent)
     table 5 : Customer/Material
     table 6 : Price List Type/Currency/Material
     table 4 : Material
5-Next,I need to maintain Condition tables's Records.Such as the table 5(Customer/Material).I guess the sap would supply one screen for me to input the data of table 5.At this screen,the sap would ask me to select one table,such as table 5.When I select the table 5,the sap would go to the screen to let me input the data of table 5.But when I use the T-CODE VK31 or VK32 to maintain Condition tables's Record,I found it's total different from my guess:
A-First,I can not found one place for me to open the table,such as table 5,to let me input the data?
B-Second,For example,when I select the VK31->Discounts/Surcharges->By Customer/Material,the sap show the grid view at the right side.At the each line of the grid view,you need to select the Condition Type at the first field.And this make me confused very much.Why the sap need me to select one Condition Type but not the Condition table?To the normal logic,it ought not to select Condition table but not the Condition Type!
Dear all,I'm a new one in sd.May be this is a very stupid question.But it did puzzle me for a long time.If any one can explain this question in detail and let me understand the concept,I will appreciate him/her very much.Thank you.

Hi,
You said that you are using the T.codes VK31 or VK32.
These transaction codes are used to enter condition records for standard condition types. As you can see a grid left side having all the standard condition types like price, discounts, taxes, frieghts.
Pl check using T.code VK11 OR VK12 (change mode)
Here you can enter the required condition type, in the intial screen. (like PR00, MWST, K004, K005 .....etc)
After giving the condition type, press enter or click on Combinations icon on top of the screen. Then you can see all the condition tables which you maintained for that condition type. Like as you said table 118, table 5, table 6 and table 4.
You can select any table and press enter, then you can go into the screen in which you have all the field cataglogues you maintained for that table. For example you selected combination of Customer/Material (table 5) then after you press enter then you can see customer field on top, and material fields.
You can give all the required values and save the conditon record.
Hope this is clear.
REWARD IF HELPFUL.
Regards,
praveen

2 question about GPU and Lens correction ,cs5

Hi
i have 2 questions about Gpu and lens correction in Cs5
1)Filter->lens correction->search online
i get often and almost every connection time out at the first click on search online , at the second click i get no online profile
is it normal?
2) question is about Gpu
it run faster , but talking about ajustament layer
like saturation or vibrance for example
i found with the gpu on , a light slow refresh compared with gpu off
i have set cache levels 6 ,history 20
i guess are the defaul
well i add a saturation layer and move the saturation slide ,increase o decrease saturation
with Gpu Off , the changes are immedially , i mean i can see in real time the increase o decrease of saturation
with Gpu On it takes a few(very few) time more
again is normal ?
don't be angry , i'm going to buy cs5 and i'm unsecure ... the price make a big role
thanks

For what it's worth, I also see a timeout on the first [ Search Online ] click, after about half a minute delay. Second click turns up results immediately. This happens each time Lens Correction is started, even without restarting Photoshop, and in both 32 and 64 bit versions. Also note that I started with one profile listed by default (though from the wrong camera) for my 40D with 28-135 zoom.
I alsow noticed that I was seeing progress bar activity in the Lens Correction dialog while I was typing this (even though Lens Correction was NOT the active window) every time I hit the 'L' key. Strange.
Windows 7 x64.
-Noel

Three questions about Java and Ftp

Hello, i've the following questions about Java and Ftp:
1- .netrc file is in $HOME directory but i can't access to this directory from java code. The following line producesan Exception (directory doesn't exists)
FileWriter file = new FileWriter ("$HOME/.netrc");
2- .netrc file must have the following permissions: -rw- --- --- but when i create the .netrc file the following permissions are on default: -rw- r-- r--, how can i change this permissions? (In java code, i can't use chmod.....)
3- Are there any way to pass parameters to a .netrc file? If i get to do this i needn't change the permissions because i can't modify or create/destroy this file.
Thanks in advanced!!!
Kike

1- .netrc file is in $HOME directory but i can't
access to this directory from java code. The
following line producesan Exception (directory
doesn't exists)
FileWriter file = new FileWriter ("$HOME/.netrc");$HOME would have to be replaced by a shell, I don't
think you can use it as part of a legal path.
Instead, use System.getProperty("user.home");
Ok, thanks
2- .netrc file must have the followingpermissions:
-rw- --- --- but when i create the .netrc file the
following permissions are on default: -rw- r--r--,
how can i change this permissions? (In java code,i
can't use chmod.....)Yes, you can: Runtime.exec("chmod ...");
I need to use estrictly the .netrc with -rw- --- --- permissions
Yes, i can use Runtime.exec ("chmod ..."); but i don't like very much this solution because is a slow solution, am i right?
3- Are there any way to pass parameters to a.netrc
file? If i get to do this i needn't change the
permissions because i can't modify orcreate/destroy
this file.I don't think so. Why do you need the .netrc file in
Java at all? Writing a GUI frontend?I want to use automatic ftp in a java program and FTP server, the files and path are not always the same, so i can:
- modify .netrc (for me is the complex option)
- destroy and create a new .netrc (is easier but i have permissions problem)
- use .netrc with parameters but i haven't found any help about it
Thanks for your prompt reply!!!!
Kike

I have Windows 8 64 bit. iTunes works fine with my iPHONE but when I try to go to the iTunes store it loads to about 80% and then the message "iTunes has stopped working"

I have Windows 8 64 bit. iTunes works fine with my iPHONE but when I try to go to the iTunes store it loads to about 80% and then the message "iTunes has stopped working"

COPY QTMovieWin.dll FROM c:\program files (x86)\common files\apple\apple application support\ INTO c:\program files (x86)/iTunes"

Basic question about storage and safety in iMovie '11

A very basic question about storage and safety:
I want to keep a backup of my raw footage on my external hard drive prior to begin working on the movie in iMovie. I want to do this:
1. Upload the digital files from my camcorder to my Desktop *(as opposed to iMovie)*
2. Duplicate that footage/clips.
3. Put the duplicate clips/footage into a folder labeled with the name of that footage (like "Fun At the Dentist" or "Jimmy Learns How to Yodel").
4. Drag the folder with the footage/clips into my external hard drive into a pre-existing folder titled "Backups/duplicates of all of my raw footage/clips." This big granddaddy folder will house all of the child folders of different movies.
5 Then, open up iMovie '11 and import the raw footage/clips from my Desktop rather than from my camcorder.
6. Then I want to make a duplicate of my finished movie and put it in my external hard drive in a "Finished Movies" folder.
I know that the original raw unedited footage will always be in iMovies '11 but I want the original to also exist immediately accessible in my external hard drive.
QUESTION:
Is this viable? Is it wise? (I know it goes an extra unnecessary step, but aside from that.)
*Do you have any precautionary advice?* Should I do something in my iMovies '11 preferences? What?
In earlier years with iMovie '04 or '06 (cannot recall) I made many novice errors and ended up losing audio to my finished movie. I also lost footage.
This time around with iMovie '11 I don't to make such novice, ignorant errors.
Thanks so much for any comments to this question.
-L

Yes I'm sure it will work great for you.
The iFrame format is something Apple has come up with. The reason for its existence is unknown to me so I can only speculate. But it seems to me that Apple "invented" this format in order to have devices such as Ipod/Ipad/Iphone/Ixxx create clips that are editable on consumer hardware such as already mentioned devices but also standard Mac computers, without the need for format conversion.
iMovie converts most input formats during import, which takes a lot of time, and this need for conversion often comes as a surprise to most people new to home video editing.
iFrame has a resolution of 960x540 which is long way from the common standards of 1920x1080 and 1280x720. If your end target is YouTube however, this may not be too bad though. However if you intend to go with YouTube HD, you may find iFrame footage to look wrong since they are effectively upscaled to a higher resolution.
Technically iFrame uses the H.264 algorithm, a smaller frame size (960x540) and a rather low compression scheme. This will result in large files, but the plus side is that the files are ready for editing without the need for any conversion and iMovie will natively edit the files.

Question about RAC and ASM

Hi,
We are thinking about build RAC using ASM for OEM database. It'll have two nodes, oracle 10g and Hitachi san with solaris ( or linux ). I've few questions about RAC and ASM.
1) Do I need to have ASM instance running on each node ? ( most likely yes... but want to make sure )
2) can I share oracle_home between ASM instance and database instance ? what is the best choice ?
3) I'm planning to use shared disks for all files, all databases.... what are the pros/cons ?
4) what should be the installation procedure ? Meaning, first create ASM instance on each node, then install cluster software, build RAC databases...... can someone explain..
5) I believe RMAN is the only option for backup since I'm using ASM, correct ?
I'm a newbie to RAC and ASM..
Thanks,

user4866039 wrote:
1) Do I need to have ASM instance running on each node ? ( most likely yes... but want to make sure )yes.
2) can I share oracle_home between ASM instance and database instance ? what is the best choice ?in 10g you can, in 11gr2 you cannot. and it might be better to seperate them because it will give you more flexibility with patching.
3) I'm planning to use shared disks for all files, all databases.... what are the pros/cons ?if you share your oracle_home you won't be able to do rolling updates. so i recommend to keep oracle_homes local.
4) what should be the installation procedure ? Meaning, first create ASM instance on each node, then install cluster software, build RAC databases...... can someone explain..follow the install guide for your respective version. for 10g you'd install clusterware first, then asm and database is last.
5) I believe RMAN is the only option for backup since I'm using ASM, correct ?pretty much. you could stop your database and dump the raw devices or use asmcmd/asmftp but rman is definitely the best choice
Bjoern

Question about scrolling and Movie Clips Loaded from the Library

I hope I am posting this in the right forum.
Ok, I'm using actionscript 2.0, and I am trying to make a scrolling image gallery. I have a movie clip with three layers. the first contains a movie clip used as a scroll bar. The second is a mask used to hide the overflow content, and the third contains movie clip thumbnails. when I click one of the thumbnails, it loads a symbol containing a larger version of the picture over top of the thumbnails on the same layer. My problem is, the large image is added at the very top of the movie clip, even when it is scrolled out of sight. I want it to appear in sight, so the user doesn't have to scroll all the way back up to the top to see it. This is annoying and confusing. Is there a way to do this?
Here is the code I used to create the scroll effect (there is actually a whole lot more to the code but it is very long, so I am not adding it now. I will if it is needed though)
(Oh, and there is no text involved in this. I just got this code off a tutorial and I haven't changed the variable names yet)
    var scrollUpper:Number = 58;
    var scrollLower:Number = 309;
    var textLower:Number = 60;
    var textUpper:Number = -179;
    var scrollRange:Number = scrollLower - scrollUpper;
    var textRange:Number = textLower - textUpper;
    var startY:Number = imagesHolder_mc.thumbs_mc._y;
    function scroll(){
       var moved:Number = imagesHolder_mc.scroller_mc._y - scrollUpper;
       var pctMoved:Number = moved/scrollRange;
       var textMove:Number = pctMoved*textRange;
       imagesHolder_mc.thumbs_mc._y = textLower - textMove;
    imagesHolder_mc.scroller_mc.onPress = function(){
       this.startDrag(false,this._x,scrollUpper,this._x,scrollLower);
       this.onMouseMove = scroll;
    imagesHolder_mc.scroller_mc.onRelease = scroller_mc.onReleaseOutside = function(){
       this.stopDrag();
       this.onMouseMove = null}

Thanks for your reply. I'll try to explain it better. I have a long, vertically scrolling movie clip. This movie clip contains lots of thumbnails. When I click a thumbnail, the full sized image is loaded from the library and displayed within the same movie clip. when I click the full size movie clip, it disappears again, and I can click another thumbnail to display another full size image. So I'm not just adding more and more stuff to the gallery if that's what you were thinking. I'm just clicking thumbnails to display the full size image so I can look at it, closing it, and moving on.
But the full sized image is fixed at the very top of the scrolling movie clip, so if I click a thumbnail at the very bottom, I have to scroll all the way back up to the top to see the full size image. I just want the full size image to appear on screen no matter how far down I have scrolled to click a thumbnail.
I made my basic gallery useing this tutorial:
http://flashexplained.com/actionscript/making-the-ultimate-dynamic-image-gallery-in-flash- 8/
if you want to take a look at that, to get an idea of what I'm talking about.
Now I'm just trying to add some scrolling functionality, which wasn't included, but I don't really understand actionscript well enough to do this easily on my own.
Sorry for the long reply. I hope this is clearer.

Noob question about JWT and saving/loading midlet states

Hi,
I am currently playing with a midlet in JWT - it's actually a Java game. I want to "save" particular states of the midlet and then load them. For example, while playing the game, a multiple choice question appears. I want to save the exact progress up until that point in time, choose one of the answers, view the feedback and then load the saved state and try again with another answer.
I used a lot of game console to PC emulators, and almost all of them support saving and loading states. Does JWT have such a feature? If not, do you know of any Java ME emulator that has it?
Cheers,
Tiberiu

Yes, I am aware. But that does not answer my question.

Question about internet security...please help!

Hi everyone,
I have a question about the macbook's internet security.
A few days ago I became aware that my sibling was using a laptop for internet use at my house which he got from a person that I do not trust. He is very computer-savy and we're worried that he may have installed some form of spy ware on that laptop and in turn, may have tried (or succeeded) in accessing my Macbook through some form of spyware. My house is hooked up with a D-Link wireless router, and at the time, it had no internet/access-password.
So my question is, could this person have accessed my computer and personal information remotely by and through the laptop that my sibling got from him. I was under the impression that Mac's have very strong firewalls, but I have also heard that as long as he knew what he was doing, he could have accessed my computer. I don't have a wireless "network" set up at my house, I just simply use the router for internet. But my sibling told me that this guy was his "network administrator" which leads me to believe that he must have had remote access to the laptop.
Can anyone with knowledge on this problem please weigh in and let me know what I need to do to confirm that no one has accessed anything from my macbook.
Thanks!

One option if you want to be extra safe is turning on FileVault (System Preferences -> Security), which will encrypt everything on your computer so that if somehow someone does gain access to your computer they will have a next to zero chance of being able to read anything they get from your computer. You have to have a lot of extra hard drive space on your computer to turn it on though.
Also, a "network" is just a connection between computers, regardless of the internet is involved or not. So when you connect your computer to the router which gives you the internet, you are putting your computer on a network. Now I believe that in order for this person whom you don't trust to gain remote access to your computer, they would have to have more information such as an IP address for your computer, through the router in order to get to it.
One thing I think is very important to consider that isn't on the technical side of things is something called "Social Engineering" which is a form of cracking, or hacking. You can do your own research, but in a nutshell Social Engineering is getting people that have access to something I'm trying to hack to give me information. For instance, this person you don't trust could be giving your brother the computer in the hopes that he will download something through your router to that laptop which could give him IP addresses and other information. And then when he gets that laptop back he could scan it for useful information and your brother wouldn't know he did anything wrong at all. The best way to avoid this is purely education and communication. Even if your brother doesn't share the same suspicions about this person, surely he will understand the need to be careful and smart when it comes to sharing personal information in the digital world.

HT201303 hi just got my new apple ipod touch i need to update my security information other wise it wont let me download apps it says to enter three questions about myself and i get to the third question and it wont let me enter the third question

hi just got my new apple ipod touch and to download apps it wants to add questions about myself for more sercurity information. i get up to question 3 and it wont let me select a question but it will let me write an answer so i just pressed done and then it says i cant carry on because ive mised out information when it wont let me do a question!

Welcome to the Apple community.
You might try to see if you can change your security questions. Start here, change your country if necessary and go to manage your account > Password and Security.
I'm able to do this, others say they need to input answers to their current security questions in order to make changes, I'm inclined to think its worth a try, you don't have anything to lose.
If that doesn't help you might try contacting Apple through Express Lane (select your country, navigate to iCloud help and enter the serial number of one of your devices)

Just installed iOS6, questions about "iMessage" and other things...

I've been a satisfied iOS4 user since I bought my iPhone4, but I was forced to install iOS6 tonight in order to download a "free" app. I found a few new icons on the screen along with about 200 percent more "Settings" I'd like to ask some questions about. I'm sure a few of these could be answered by doing a frantic and thorough search through weeks of posts but I'm a little short on time right now.
First, what exactly is iMessage? Looking at the page for it, I can't see any difference between it and regular text messages. The info page says its to avoid charges, but between my data plan and not being charged for text I don't see where theres any other benefit. The one person I text with the most recently asked me why I had not installed iMessage yet, and didn't have an answer when I asked him why I should. I guess he just wanted to see text replies in blue instead of green.
In a related bit, flipping through Settings>Messages>Send & Receive I find a "2 addresses" section, with my phone number in there as well as my email under "You can be reached by iMessage at:" and "Start new conversations from:". What good does it do iMessages to have my email address? Does the Mail app handle text as well as email addresses? That seems to be the only explanation, and also very odd to think I'd be trying to text through my Mail app.
Second, looking through the Settings>Mail I see now that I have an icloud email address as well as the mac.com address I've been desperately hanging on to for the past 10 years, and the me.com address they've been trying to force me into since those came out. (I was happy to see I could delete the me.com address from the phone. I wish I could delete it from the universe.)
I wasn't even aware there was a such thing as icloud.com addresses. When did this happen? What is it used for?
Third, under that icloud Setting I see a long list of apps with buttons labeled "Off" under it. What are those for? Under the Mac.com settings I see switches for "Mail" and "Notes", with Mail on and Notes off. The Notes app (which I haven't used since my old iPhone 3) still opens, regardless of this setting.
Fourth, I now have an item called "Facetime" under my Settings. It is off, but underneath it says "Your phone number and/or email address will be shared with people you call". I understand caller ID normally sends caller number info to the receiver, but why would someone need my email address if I call them?
Fifth, I now have a "Music" setting, at the bottom of which I see a "Home Sharing" item, which when clicked brings up my AppleID and asks me if I want to Sign Out or Cancel. What is Home Sharing? Its also at the bottom of the "Video" settings.
Sixth, now I have Twitter and Facebook settings? For what? I don't have accounts with either of those companies. So why have settings, especially since it asks me to create accounts and download apps for those companies right in the Settings?
Seventh, there is a camera icon on the unlock screen. Touching it causes the screen to bounce up about a quarter inch, almost but not quite revealing something behind it. I should probably just quit asking about this stuff already, but I'll take the bait - what is this now?
Finally, what is the Notification Center used for?
If I got a text under iOS4, it would put an alert on the Unlock screen. Scrolling through this huge list of things under the Notification settings I'm really blown away by all the apps set up to yell at me. I can see having an alert for a text message but Game Center? What the heck is that, and why is it set up to hit me with a "Badge App Icon" (whatever that is) when I get alerts from "Everyone". Similarly, the phone is set to alert me to something called a "Photostream Alert"? What is this? Why is there a Phone section for the Notification Center? So they can put a Notice on my screen to tell me the phone is ringing? Holy cow! The phone is set to send me alerts from the "Weather Widget". So if I miss the fact its raining there will be a message on my screen to let me know? Whats next - a buzzer to tell me I'm listening to music?
There's a lot more, like what would I need Passbook for when I have the actual movie tickets, gate boarding passes, coupons, etc in my hands, but we'll leave that for another time. Many thanks to all who can offer some answers to my questions above.

Hey Taantumus!
Here is an article that will provide some guidance on this question:
Apple ID: Changing your password
http://support.apple.com/kb/ht5624
The next time you use an Apple feature or service that uses Apple ID, you'll be asked to sign in with your new Apple ID password.
Thanks for coming to the Apple Support Communities!
Regards,
Braden

Loaded Question about Internet and Passwords

Similar Messages

Maybe you are looking for