Loader bar strange behaviour in certain browsers

Hi there,
I've been using this code for loader bars for a little while and it looks good. Most of the time !
In some browsers (notably chrome mac, and firefox PC) the loader bar flies off in the opposite direction and doesn't show the load at all, just puts a white bar across the left hand side of the page (from the origin of the movieclip backwards) !
Here is my code, can anyone help me out please ? :-
var myMovie:Sprite;
var l:Loader = new Loader();
l.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS, loop, false, 0, true);
l.contentLoaderInfo.addEventListener(Event.COMPLETE, done, false, 0, true);
l.load(new URLRequest("myswf.swf")); // << Full URL on export
function loop(e:ProgressEvent):void
  var perc:Number = e.bytesLoaded / e.bytesTotal;
  logo.bar_mc.scaleX = perc;
  logo.bar_mask.scaleX = perc;
function done(e:Event):void
  removeChild(logo);
  logo = null;
  myMovie = Sprite(l.content);
  stage.addChild(myMovie);
  l.contentLoaderInfo.removeEventListener(ProgressEvent.PROGRESS, loop);
  l.contentLoaderInfo.removeEventListener(Event.COMPLETE, done);
  l = null;
Thanks in advance
Martin

clear your cache and test.  if the problem never occurs with a cleared cache then your swf may be loading from cache before a progressevent is dispatched.
if that's the issue, handle in your complete listener function.

Similar Messages

  • Load-Balancers strange behaviour.

    Hi Gurus,
    I have a kind of a strange behaviour of our our CSS11150 Load-Balancers configured in Active-Standby mode.
    These LBs monitor the servers and the latters report UP and Down state from the Standby unit while they are always UP from teh Active unit.
    Did anyone see this behaviour before?
    Here is the sh version from both of them:
    ActiveLB# sh ver
    Version: ap0610203 (6.10 Build 203)
    Flash (Locked): 3.10 Build 26
    Flash (Operational): 6.10 Build 203
    Type: PRIMARY
    Licensed Cmd Set(s): Standard Feature Set
    Thank you in advance.
    P.S. It's worth mentioning that the servers weren't Down at the time when Standby unit reported Down state.

    This one looks like a bug to me. I would suggest that you upgrade the firmware on the CSS to the latest version. The version that you are running is far behind the present release. I am sure that the upgrade of the firmware should solve the issue.

  • On macbook pro when logging in the loading bar gets to a certain point every time then crashes

    I recently upgraded to yosemite, I tried to go on my macbook but after I log in the system shuts down automatically

    OK, let's try this: as it sounds as if there's something wrong with your hard drive.
    Try booting into Internet recovery by holding down the command, option and R keys whilst booting. Make certain that you have a good Internet connection before doing this. Eventually (and it will take a while) you'll see a globe on your screen and then, eventually again, the Recovery screen. Select Disk Utility, then at the top left highlight your boot drive (usually named "Macintosh HD" unless you've changed it) and click on the "Verify" button. If everything's OK with your boot drive you'll get a green text telling you that. If it needs to be repaired, then you can try to repair it. If it does need to be repaired, I'm hoping that you already have a back-up in place as there's probably a 50/50 chance of Disk Utility being able to repair the drive.
    Clinton
    MacBook Pro (15” Late 2011), OS X Yosemite 10.10, 16GB Crucial RAM, 960GB M500 Crucial SSD, 27” Apple Thunderbolt Display

  • Some images do not load, but only on certain browsers

    I have a really weird problem, I posted my web site and it appeared to work just fine with Safari, Explorer and Firefox. However, certain AOL browsers do not see some images. I can repeat the problem on the latest AOL client for Mac on two of my Macs here. My father inlaw says some of his friends cant see the images either (i am waiting for more info back from him, they all use Windows, so I think the problem is more than the Mac client).
    The problem only appears when you try to load a photo page, it just loads the background and not the pictures. All other images load OK on pages that are not photo pages, and as they are all '.PNG' I cant see what the difference would be.
    If anyone has a variety of browsers (especially AOL Mac) and can confirm this odd behaviour I would appreciate it. The page appears to complete loading, and doesn't show any broken links or errors - the pictures are just not there!
    The main area is http://www.david-andrews.com/Wedding/Intro.html
    If you select one of the wedding albums at the top of the above page then on certain browsers the images don't load. (I only found a problem with AOL on a Mac so far, but my father inlaw's friends don't have Macs). The Macs I tried both had Java script turned on etc.
    Thanks for your help, any advice greatly appreciated.
    Dave Andrews
    Powerbook G4 1.33ghz   Mac OS X (10.4.6)  

    Dave....
    I tried your site on my mac in Safari and on Firefox. I also tried it on the imac explorer running xp.... all of the pages loaded fine.
    Can't repeat the problem here.
    I saw a post from Quicktimekirk about punctuation in picture names. iWeb will have trouble with picture files if there is any kind of punctuation in the names. I would look up his posts and see what he's got to say about it.
    jim

  • FIM Load Balancing and SPN's - Strange behaviour

    I have a FIM setup in a domain
    I have mycorp.com and a domain in the same forest contractor.mycorp.com (fictional setup)
    I have 2 servers built in the contractors.mycorp.com domain
    Id1
    Id2
    Id1 has the Service and portal on wss3 in SharePoint farm mode, Sp central admin is on this as well
    Id2 has the service and is a load balanced SharePoint farm.
    I have NLB setup and working the service name is identity.mycorp.com pointing at the IP of the NLB
    I have a CNAME identity pointing at identity.mycorp.com
    Identity.mycorp.com is used as the name of the Service and the Portal.
    In the ApplicationHost.config I have
    <system.webServer>
       <security>
          <authentication>
             <windowsAuthentication enabled="true" useKernelMode="true"
    useAppPoolCredentials="true" />
          </authentication>
       </security>
    </system.webServer>
    I have kernel mode enabled, and I have Windows authentication enabled in the IIS console on id1 and id2.
    The app pool credentials are a domain account SPService for SharePoint Service, the app pool is set on both id1 and id2 servers. The root domain account mycorp\SPService us used.
    In
    c:\inetpub\wwwroot\wss\VirtualDirectories
    I have set
    <resourceManagementClient
    requireKerberos="true"
    I have registered the alternate URL mappings for SharePoint as
    Identity
    Identity.myCorp.com
    I have registered SPN's for
    Setspn –S FIMService/identity.myCorp.com myCorp\FIMService
    Setspn –S FIMService/identity  myCorp\FIMService
    Setspn –S HTTP/identity.myCorp.com myCorp\SPService
    Setspn –S HTTP/identity myCorp\SPService
    I have configured delegation for both accounts in ADUC for the identity.mycorp.com
    So all is well and I installed everything fine.
    Now my problem is that if I go to id1 and browse to http://identity/identitymanagement I get redirected , and authenticated with my admin account to
    http://id1/IdentityManagement/default.aspx
    On id1 if I go to http://identity.myCorp.com/identitymanagement I get prompted for credentials, when I enter myCorp\FIMAdmin and my password I get redirected to the portal at
    http://id1/IdentityManagement/default.aspx
    If I try and authenticate to any of the previous URL's from other machines in my domain, including the load balanced box id2 I get "HTTP Error 401. The requested resource requires user authentication."
    Even if I try and browse to
    http://id1/identitymanagement from another machine I am getting 401. Only on
    http://id1 am I getting a result, even if there is a prompt.
    I am sure my SPN's are fine, there are no duplicate SPN's , I checked with the -x switch
    So my load balanced portal and service are not working as I would have thought , I have looked at
    http://blogs.msdn.com/b/webtopics/archive/2009/01/19/service-principal-name-spn-checklist-for-kerberos-authentication-with-iis-7-0.aspx
    http://social.technet.microsoft.com/Forums/en-US/484faae8-4df6-4b81-8b2d-9d75d5258e4f/fim-portal-http-error-401-the-requested-resource-requires-user-authentication?forum=ilm2
    http://social.technet.microsoft.com/wiki/contents/articles/4473.fim-http-error-401-the-requested-resource-requires-user-authentication.aspx
    http://setspn.blogspot.ie/2010/06/kerberos-basic-troubleshooting-tip-3.html
    The only thing that I can think of is that the machine is in the contractors.myCorp.com domain which makes the machine  
    unique from where the SPN's are registered, but if that was the case then browsing to the portal from
    http://id1 would certainly fail.
    Can anyone see anything wrong with my approach ?
    Normally I find SharePoint a pain, but this week it seems to be this.
    When I ran the fim service install I specified identity.myCorp.com as the name of the server
    Rob

    In my Load Balanced setup it helped a lot (on some strange behaviours) when I set up Load Balancer to keep session on one server.
    Borys Majewski, Identity Management Solutions Architect (Blog: IDArchitect.NET)

  • I cannot load the Zynga game Pioneer trail, the game shows the loading bar as full but will not progress past the load page, The game works in other browsers.

    Only goes as far as the load page, and loading bar shows 100%

    You can check for problems caused by recent Flash updates and try these:
    *disable a possible RealPlayer Browser Record Plugin extension for Firefox and update the RealPlayer if installed
    *disable protected mode in Flash 11.3 and later
    *disable hardware acceleration in the Flash plugin
    *downgrade the Flash player to version 10.3 or 11.2
    *http://kb.mozillazine.org/Flash#Troubleshooting
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do not click the Reset button on the Safe mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    Try to disable hardware acceleration in Firefox.
    *Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    *https://hacks.mozilla.org/2010/09/hardware-acceleration/

  • Strange behaviour of .swf movies - AS2/AS3

    Hello from Italy,
         this is my first post and I think I need some help from the experts...
         I am putting together an interactive Flash movie which is made of several different small movies. For the sake of clarity, I'll call them A.swf, B.swf, ..., Z.swf. The movies are launched from each other depending on certain buttons I've implemented.
         The first one, A.swf, is actually a sort of "main menu": it grants access to all the other movies and it is also the point of return from them when a certain button is pressed.
         Important: All the movies are scripted in AS3, except for the last one which, for a number of reasons, is scripted in AS2.
         The return from any (but the last) movie to the first, say B.swf to A.swf, is implemented like this:
    function eventResponseSole(event:MouseEvent):void {
    var myLoader:Loader = new Loader();
    addChild(myLoader);
    var url:URLRequest = new URLRequest("A.swf");
    myLoader.load(url);
    sole_btn.addEventListener(MouseEvent.CLICK, eventResponseSole);
         This is, of course, AS3.
         The last movie, which is scripted in AS2, returns to A.swf like this:
    luna_btn.onRelease = function() {
    loadMovie("A.swf", _root);
         The strange behaviour is this: if I launch Z.swf and navigate with the proper button up to A.swf, everything works. But if I launch A.swf, navigate to Z.swf and attempt to return, this doesn't work. There are no problems, instead, moving up and down between movies scripted in AS3, that is with the first bit of code I've pasted. My guess is that the syntax in AS2 is correct, but something stops A.swf from "launching itself" when the control is transferred to Z.swf, but the movie is launched in the original window. Is this diagnosis reasonable? And if so, would someone kindly provide a way out of this? Re-doing Z.swf in AS3 is not an option, I'm afraid, it will have to stay as it is. I also have to add I've tried some solutions by setting _lockroot, but this doesn't seem to work.
         Many thanks in advance!
         Marco Olivotto

    Mixing AS2 into AS3 is not without stipulations... and I am no expert on translating those stipulations, but here is what the Flash documentation says regarding the matter... the third paragraph may be significant to your case:
    - ActionScript 3.0 code can load a SWF file written in ActionScript 1.0 or 2.0, but it cannot access the SWF file's variables and functions.
    - SWF files written in ActionScript 1.0 or 2.0 cannot load SWF files written in ActionScript 3.0. This means that SWF files authored in Flash 8 or Flex Builder 1.5 or earlier versions cannot load ActionScript 3.0 SWF files.
    The only exception to this rule is that an ActionScript 2.0 SWF file can replace itself with an ActionScript 3.0 SWF file, as long as the ActionScript 2.0 SWF file hasn't previously loaded anything into any of its levels. An ActionScript 2.0 SWF file can do this through a call to loadMovieNum(), passing a value of 0 to the level parameter.

  • Strange behaviour in ORacle Forms Webutil 106 / Error message WUC-14 WUC-12

    This is to inform you about a strange behaviour in Webutil V1.0.6
    Hosting environment is Oracle Application Server 10.1.2.0.2 on Unix Solaris 10
    Oracle Server 10.2.0.4.0 Enterprise Edition
    Client-envionment : Windows 2000, IE 6
    I created an Forms based application which reads in certain text files into the database using
    Webutil. The data will get changed using the application with logic and lateron a different textfile
    will be transmitted using either ftp or it may be created on the client side (again with Webutil).
    This solution worked perfect for some time (a year or so) using CLIENT_TEXT_IO...
    Hoewever, during the week, I recognized users coming up with the statement that the download
    to the local client does not worked anymore in certain situations. The system is producing an error-msg
    on the Form in the following sequence :
    WUC-14 [getFromObjectCache] ...
    WUC-14 [getFromObjectCache] ...
    WUC-12 [FileFunctions.newLine()] ...
    I traced the session and traced WebUtil, was able to reproduce the problem but could not find out the source
    of it in the first place.
    Hoewever, it came out, that part of the file being created on the client is a "¿" sign : hex :$BF
    This was already part of the file being read in the first place, so the value is stored in the database.
    There is no problem when reading a file having a content like this with CLIENT_TEXT_IO but there obviously is one
    when writing it to the local client.
    The file is getting processed on the client and gets closed with CLIENT_TEXT_IO.FCLOSE.
    After the FCLOSE statement is getting processed, the above errors occurs, The length of the produced file is then : 0 bytes ^^
    Whenever facing a problem like this check the content of the file you are trying to create.
    Workaround was :
    - set workingDirectory in formsweb.cfg
    - using Forms based TEXT_IO rather than CLIENT_TEXT_IO to create the file on the backend side (Apps-server)
    - implement WEBUTIL_FILE_TRANSFER.AS_To_Client_With_Progress to download the file to the client
    In order to make it a little bit "colourful" I implemented a bean with progressbar when creating the file on the back end side
    Works perfect... and looks nice :)

    XeM wrote:
    Hi Andreas,
    install.syslib.location.client.0=webutil\syslibi found the above line over google but when i check my webutility configuration file i didn't found it there. I added this line after the line i have mentioned in previous post but this also not worked. And then i worked on changing permission over folder.
    HI XeM
    Your adding location is ok. But i suggest try something different. Change the above line to
    /* i'm confuse with the \ or / *\
    install.syslib.location.client.0=\webutil
    or
    install.syslib.location.client.0=/webutilAnd do the following work In the client
    1. Close ALL open browsers.
    2. On the client machine search all directories for webutil.*properties and delete all instances of that file.
    3. Delete d2kwut60.dll, JNIsharedstubs.dll, and jacob.dll from the JRE\bin directory.
    4. Clear the JRE jar cache. This can be done several ways, but using the Java Control Panel is likely the easiest and safest.
    Now stop the OC4J instance and start again and try at client...
    Hope this works...
    If works... please post the solutions.
    Hamid

  • Strange behaviour with combo boxes.

    Has anyone else noticed strange behaviour of combo boxes with applets?
    What happens is that on selecting the combo drop down, the dialogue the combo is sitting on moves behind its parent window. You just end up seeing the combo list, and no dialogue. Select a combo item, and sometimes the dialogue reappears, and sometimes it is still hidden.
    I've only seen this whilst running an applet in browsers. In Eclipse I don't see the behaviour.
    The behaviour is also very intermittent.
    I'm using Java Plug-in 1.6.0_10-rc2, Using JRE version 1.6.0_10-rc2 Java HotSpot(TM) Client VM, on Windows Vista, Google Chrome browser.
    I'd raise it as a bug, it certainly seems quite serious, but I don't have a reliable test case.
    I have a work around, on all my dialogues with combo's on them, I have setAlwaysOnTop(true). Not really the correct behaviour though.

    GeoffTitmuss wrote:
    No, I believe I am just using Swing components.Ok, then I'm out of ideas

  • View Master mode strange behaviour with jpg files

    Hy all,
    I'm using Aperture, and I'm tweakin a lot the SW to discover all secrets ....
    I'm really concerned about a strange behaviour of the SW in view mode.
    If I open a jpg file, do not apply ANY modification, and apply the "show master" command (pressing M), there's a subtle behaviour :
    *the images get sharper !!!!*
    It behaves as if an "edge sharpening" was applied !!!!!!
    With _RAW files this thing doesn't happen at all._
    Even stranger, if I zoom to full definition (by pressing Z), and toggle between normal view and "show master" view, the immage remains the same !
    The effect is not so evident with all images, but sometimes it is !!
    Anyway, I expect not to have such kind of things with a professional SW.
    With professional cameras and good quality files it's really annoying not to beeing sure what's the REAL content of the jpg image.
    Has anyone noted this thing ? Is there a reasonable explanation ?
    The only one I tried to figure out is the following : may be Aperture applies some kind of resampling algorithm with jpg files (bicubic, bilinear, etc).
    May be this resampling is not applied with 100% magnification, as weel as with raw files.
    But it's only my guessing. Now, I'm tweaking other viewers and other SW to understand what's the real jpg image stored in the file : the blurer one form normal view or the sharper one with "show master" mode.
    I stress once again : of course, the jpg file I'm talking about have no settings at all, just imported and toggled with M button.
    Thanks in advance.
    Regards,
    Enzo

    Hy,
    I'm afraid I'm not been clear.
    The problem is this :
    1) jpg image opened in normal view mode, no zoom, (no quick preview, of course) : image with a certain amount of blour
    2) jpg image opened in show master mode, no zoom, (no quick previre, of course) : image SHARPER with respect with the previous.
    No edit applied from import, so "show master" command shouln't apply any change in rendering, should it ?
    The only thing I said on 100% view is that such difference (between normal mode e show mastermode) is not present with 100% magnification.
    That was the issue.
    Enzo

  • The loading bar at the bottom of my browser has disappeared and I want to reinstall or reactivate it. How do I do this please and what is this bar called? I use the lastest version of Firefox 3.6.3 and Windows XP.

    The loading bar at the bottom of my Firefox browser has suddenly disappeared and I want to reinstall or reactivate it. How do I do this please and what is this bar called? I use the latest version of Firefox 3.6.3 and Windows XP. I have many add ons and I usually automatically install the recommended updates. This problem has never happened before and switching my browser on and off again does not solve the issue.
    == This happened ==
    Every time Firefox opened
    == I am not sure why this suddenly happened. I think it may have been after my usual updates but I am not sure if that has anything to do with it at all.

    Loading Bar? Maybe the URL/address bar where you type sites you want to go to (like www.google.com)? See Navigation Bar below. You may also need to see the first item "Can't see the Menu Bar".
    <u>'''Can't see the Menu Bar'''</u> (File, Edit, View, History, Bookmarks, Tools, Help)?
    Turning the Menu Bar on and off is a new feature in version 3.6.
    ''(Linux & OSX see: [[Menu bar is missing]] )''
    <u>''Windows'' Method 1.</u> '''''Hold down''''' the key and press the following letters in this exact order: V T M
    <u>''Windows'' Method 2.</u> Press and release the key. The Menu Bar will be displayed; then choose ~~red:V~~iew > ~~red:T~~oolbars and click on ~~red:M~~enu Bar.
    The Menu Bar should now be displayed permanently, unless you turn it off again using View > Toolbars. Check mark = displayed, NO check mark = not displayed.
    See: http://support.mozilla.com/en-US/kb/Menu+bar+is+missing
    <u>'''Navigation Toolbar, Bookmarks Toolbar and other Toolbars'''</u> under View > Toolbars. Clicking on one of them will place a check mark (display) or remove the check mark (not displayed).
    <u>'''To display the Status Bar'''</u>, View, then click Status bar to place a check mark (display) or remove the check mark (not displayed).
    <u>'''Full Screen mode'''</u>
    http://kb.mozillazine.org/Netbooks#Full_screen
    Also see:
    ''' [[Back and forward or other toolbar buttons are missing]]'''
    '''[[Navigation Toolbar items]]'''
    You can un-install the Mozilla ActiveX control as Firefox no longer uses it and hasn't since, as I recall, version 2. See: [[ActiveX]]
    To remove Tools > Add-ons > Extensions, click on the item, click Uninstall, click Restart Firefox in the Extensions window.
    <u>'''''Other Issues'''''</u>: ~~red:You have installed plug-ins with known security issues. You should update them immediately.~~
    <u>'''Install/Update Adobe Flash Player for Firefox (aka Shockwave Flash)'''</u>: your ver. 10.0 r45; current ver. 10.1 r53 ('''important security update 2010-06-10''')
    ~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
    See: '''[http://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin#Updating_Flash Updating Flash]'''
    -'''<u>use Firefox to download</u>''' and <u>'''SAVE to your hard drive'''</u> (save to Desktop for easy access)
    -exit Firefox (File > Exit)
    -check to see that Firefox is completely closed (''Ctrl+Alt+Del, choose Task Manager, click Processes tab, if "firefox.exe" is on the list, right-click "firefox.exe" and choose End process, close the Task Manager window'')
    -double-click on the Adobe Flash installer you just downloaded to install/update Adobe Flash
    -when the Flash installation is complete, start Firefox, and test the Flash installation here: http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_15507&sliceId=1
    *<u>'''NOTE: On Vista and Windows 7'''</u> you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
    *'''<u>NOTE for IE:</u>''' Firefox and most other browsers use a Plugin. IE uses an ActiveX version of Flash. To install/update the IE ActiveX Adobe Flash Player, same instructions as above, except use IE to download the ActiveX Flash installer.
    *Also see: http://kb.mozillazine.org/Flash ~~red:'''''AND'''''~~ [[How do I edit options to add Adobe to the list of allowed sites]]

  • Cursor shows strange behaviour in 10.9.5

    HI,
    I'm using a 15" MBPr late 2013, i7, 16 GB RAM, 1 TB SSD, running on 10.9.5. Lately I registered a very strange behaviour of the cursor when using the built in trackpad. If hovering over one of the symbols in the bar at the upper right corner of the screen and then moving the cursor downward, the menu of the symbol on the right of the cursor pops up (not the one the cursor ist pointing on).
    For example: the symbol for WiFi is located left from the one regulating the volume. When hovering over WiFi and moving downwards to activate/deactivate it, the volume-controle pops up ! If I want to use the WiFi, I have to hover over the symbol for bluetooth-connectivity instead....
    Any idea whats happening here ?
    Help is very much appreciated !
    MIchael

    OK, found the solution by myself. The reason seemed to be related to the resolution of the display. Changed it to another one (no matter which one), waited for the display to change and the changed the res back to optimal for display.
    The cursor now works fine and exactly....
    Really weird.

  • Windows 8.1 Enterprise Evaluation- Strange behaviour of network adapter

    Hello there are discussions and questions around this community about network adapter dropping connection while system is running. But I have found unique problem with my network adapter driver.
    I have tried to state my problem as clearly as possible. Please ask if any detail is required.
    My network status shows no access on following occasions:
    1. On alternate system wakeups.
        eg:  
    a. System boots up 
    Internet accessible
    no problem
    b. I put system to sleep(first time) and wake it up
    No access to internet !!!
    When I check in network and sharing center not even adapter shows in disabled status.(See video from the link given below).
    c. Without restarting system or without installing network adapter again,  I put system to sleep again and wake it up (2nd time).
    Internet accessible
    d. I put system to sleep for (3rd time) and wakes it up.
    No access to internet!!
    If I put system to sleep again and wake it up definitly I get network access.
    2. If I switch off the modem before windows shutdown completely or in the process of shutdown, next time when I boot system, even though the modem is switched on before booting the system, No internet access tooltip will be shown on network
    sysbol.
    Another strange behaviour is on no internet access status, I start installing adapter, and it loads required files and prompt me to click "next" and "click" install.
    But the thing is before I go to "next" button, I will get network access as shown in this link
    http://youtu.be/sPlXVEiYBeo. Ignore virtualbox adapter. Same behaviour was there when there is no vbox adapter. Same was happening in Windows 8 Pro, but not in windows 7, so that there is no H/W problem I think. 
    Any idea on how to fix this or any alternate solution ? 

    Hi,
    Firstly, access your network adapter official website to get the proper driver applied to your system.
    Then going to Control Panel > Device Manager, right click your adapter > Properties. Under the Power Management tab, make sure "Allow the computer to turn off this device to save power" checkbox unchecked.
    If it still persists, try to disable "fast startup" as below steps:
    1.In Control Panel, open the Power Options item.
    2.Click the Choose what the power buttons do link.
    3.Clear the Turn on fast startup (recommended) check box.
    4.Click Save Settings.
    Karen Hu
    TechNet Community Support

  • Strange behaviour from new 2012R2 in old domain

    Hi all,
    At work (education level), I'm starting to take charge of windows admin, so beiing a noob admin I'm finding strange behaviours that I hope you can help me solve them all :-)
    We've one (big) domain with about 5000 computers (workers and students all together), and around 50000 users (again, workers and students all together) setup like this:
    DC-DOMAIN-1:
    Windows Server 2008R2
    Shares NETLOGON and SYSVOL
    DC-DOMAIN-2:
    Windows Server 2003 R2 x64
    Shares CertEnroll, NETLOGON, SMSLOGON, SYSVOL
    Checking RootDSE, I see 'domainControllerFunctionaly is Windows 2003' (DC-DOMAIN-2)
    So, with this setup, I've noticed these strange behaviours, hope list isn't too big  (guess there will be more behaviours but these seemed too odd):
    1) On DC-DOMAIN-2, WinServer 2003 eventlog, inside 'Directory Service', I found this warning event ID 1083 (Source NTDS Replication):
    Active Directory could not update the following object with changes received from the domain controller at the following network address because Active Directory was busy processing information.
    Object:CN=<an user name>, CN=Users, DC=DOMAIN
    Usually followed by an information event (eventid 1955) which says:
    ctive Directory encountered a write conflict when applying replicated changes to the following object.
    Object:
    <SAME USER OBJECT THAN PREVIOUS EVENT ID>
    Time in seconds:
    0
    Event log entries preceding this entry will indicate whether or not the update was accepted.
    A write conflict can be caused by simultaneous changes to the same object or simultaneous changes to other objects that have attributes referencing this object. This commonly occurs when the object represents a large group with many members, and the functional level of the forest is set to Windows 2000. This conflict triggered additional retries of the update. If the system appears slow, it could be because replication of these changes is occurring.
    User Action
    Use smaller groups for this operation or raise the functional level to Windows Server 2003.
    And having as result that user being blocked in domain.
    2) I've added a new print server based on Windows Server 2012R2 (running inside an updated ESX 5.5 with VMXNET3 ethernet adapter as recommended by vmware), and seen in the event viewer these warnings/errors:
    At System log:
    Error Event ID 5783, Source NETLOGON:
    The session setup to the Windows NT or Windows 2000 Domain Controller \\DC-DOMAIN-2.fulldns.name for the domain DOMAIN is not responsive. The current RPC call from Netlogon on \\PRINTSERVER to \\DC-DOMAIN-2.fulldns.name has been cancelled.
    I've seen Event ID 5783 with DC-DOMAIN-1 too....
    Error Event ID 5719, Source NETLOGON:
    This computer was not able to set up a secure session with a domain controller in domain DOMAIN due to the following:
    The remote procedure call failed and did not execute.
    This may lead to authentication problems. Make sure that
    this computer is connected to the network. If the problem persists, please contact your domain administrator.
    ADDITIONAL INFO:
    If this computer is a domain controller for the specified domain, it sets up the secure session to the primary domain controller emulator in the specified domain. Otherwise, this computer sets up the secure session to any domain controller in the specified domain.
    At Microsoft-Windows-TerminalServices-RemoteConnectinoManager/Admin found also this warning:
    Warning Event ID 20499 Source TerminalServices-RemoteConnectionManager:
    Remote Desktop Services has taken too long to load the user configuration from server \\DC-DOMAIN-2.fulldns.name for user administrator
    3) If I try Group Policy Modeling on DC-DOMAIN-1 (server 2008R2), everything works fine, no matter if I try it against DC-DOMAIN-1 or DC-DOMAIN-2, but if I try this from the Server 2012R2 (the one from point 2), I get this:
    Simulation against DC-DOMAIN-2: Gets executed, but all GPO show as inaccessible, empty or disabled.
    Simulation against DC-DOMAIN-1: Sometimes it gets executed as DC-DOMAIN-2, sometimes I get an error saying query can't be executed.
    4) From server 2012R2, I usually manage printing GPO. If I click on the domain root (GPMC, forest, Domains, DOMAIN-NAME-ROOT) right pane, I get a pop up saying: 
    'A processing error ocurred collecting data using this base domain controller. Please change the base domain controller and try again'
    After closing popup, right pane says something like 'DC-DOMAIN-2.fulldns.name' is the baseline domain controller for this domain.
    No infrastructure Status information exists for this domain.
    Click the Detect Now button below to gather infrastructure status from all of the domain controllers in this domain.
    Pressing 'Detect Now' does nothing, and trying to select New Baseline DC shows again same pop up than before.
    5) Last, but not least, I've feeling that GPO takes too much to apply. I've found scenarios in which even after executing 'gpupdate /force' correctly on client computer either local or domain admin, I can't see the new changes (gpresult says it has been
    updated though). But couldn't find anything on eventlog that informs about problems with GPOs...
    For all these strange behaviours I've noticed in last month that I started checking things as sys admin, I believe domain is damaged, or something is wrong there (not just my new server 2012R2, even if it's running inside an ESX, blehh), so please, any hint
    on what to check, what to change, what to fix, would be highly appreciated.
    Thanks in advance.

    Hi Paul,
    Honestly, I'm still trying to figure out all broken things reported by tests :( Guess Jesper's suggestion about adding a new 2008 DC to get rid of 2003 and start checking again after that may be best option.
    I'll try to summarize list of things I believe are wrong:
    running
    DCDIAG /V /C /D /E /s:yourdcname > c:\dcdiag.log  for every DC, shows different errors. They show things such as:
    another domain running here (not administered by us, only relationship is that our users are shared with that domain, nothing else) appear when Printing out pDsInfo (as if they were DC of our domain too, but they do not even share RootDomain). Guess it
    may be for a bug old sys admin had when clonning from his 2008R2 template, that forgot to change SID... I already noticed 1 year ago our print server shared SID with those DC, guess there may be more servers sharing SID too :-(
    Within Starting test: Replications, I see few messages at Replication Latency Check, such as the one for CN=Schema, CN=Configuration, DC=<ourdomain>: 
    Latency information for 35 entries in the vector were ignored.
                      35 were retired Invocations.  0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc.  0 had no latency information (Win2K DC)
    On Services test, I see an 
       Invalid service type: RpcSs on DC-DOMAIN-3, current value
                WIN32_OWN_PROCESS, expected value WIN32_SHARE_PROCESS
    On SystemLog, I see LOTS of warnings/errors such as:
    A warning event occurred.  EventID: 0x80000002
                Time Generated: 07/28/2014   08:21:54
                (Event String (event log = System) could not be retrieved, error
                0x503)
             An error event occurred.  EventID: 0xC0000003
                Time Generated: 07/28/2014   08:22:18
                (Event String (event log = System) could not be retrieved, error
                0x3afc)
    Missing entries on DNS (we've a static DNS)
    netdiag.exe /v > c:\netdiag.log Showed again DNS problems such as our primary DNS pointing to all DC, secondary
    DNS pointing just to DC with FSMO roles,...
    repadmin.exe /showrepl * /verbose /all /intersite > c:\repl.txt  Gave no errors, now I must check in detail
    if every replica is correct
    And finally,
    dnslint /ad /s "ip address of your dc"  gave more DNS problems:
    One or more DNS servers may not be authoritative for the domain
    One or more DNS servers did not respond to UDP queries
    One or more zone files may have expired
    SOA record data was unavailable and/or missing on one or more DNS servers
    Sumarizing, guess it will be better to fix DNS problems, promote new 2008R2 DC to get rid of 2003 one, promote domain to 2008 too, check again for messages and relationship with other domain, and then come back here for support if needed 
    EDIT: Almost forgot to talk about SYSVOL folder. As said before, there are 426 GPO folders inside Policies. Of them, 375 have an inetres.adm files in it (smallest one 1398 KB, almost all of them 2307 or 2707 kb).... 

  • Strange behaviour in Mail

    I have ongoing strange behaviour with Mail in Mountain Lion on a MacBook Pro.
    As well as randomly and intermitttently dropping connections to my various mail servers, I also, randomly and intermittently, fail to get to Print, or to create a new Mailbox, or to Quit. I just get a beep.
    Have to quit Mail - sometimes forcibly, and restart it.
    Mail will not automatically reconnect to servers after a Sleep , or moving to a differnt location.
    None of this was happenning on an older MacBook, but I was running 10.7 on that machine.
    Had to upgrade machine to allow upgrade to Mountain Lion.  Not sure which is responsible - new MB PRo , or 10.8?!
    Do I really have to re-install OSX  just to reinstall Mail?
    Any other pointers/hints very welcome.
    Thanks

    Please follow these directions to delete the Mail "sandbox" folder.
    Back up all data.
    Triple-click the line below on this page to select it:
    ~/Library/Containers/com.apple.mail
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal
    from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
    Log out and log back in. Launch Mail and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Post your results.
    Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

Maybe you are looking for