Loader/DNG Converter won't close after loading photos into Bridge

This is a very recent problem. Previously, after loading photos the loader would close, Bridge would open at the folder I created through the loader and that was it. Now after all shot are loaded, Bridge opens at the last folder I had open previously and the loader remains open. Clicking on the X box won't close it. I have to go into Task Manager to do this. I tried a full re-install to no avail. I've looked at preferences and don't see anything that helps.
I haven't done anything other than what I noted above. I tried re-installing PhotoShop and Bridge and that didn't fix the problem. The only other thing that has happened since I noticed this problem was that Windows updates automatically installed. I'm on Windows XP Pro SP3. The problem is not a show stopper but it is annoying.
Anybody have any ideas why this would happen and how to fix it?

OK, I tried changing the Preference by opening Bridge with the Ctrl key held down but I wasn't presented with the popup noted.
However -- D'OH! -- last night when I inserted my card into the reader and the dialog came up asking what I wanted to use to open I noticed that it was defaulting to Bridge CS3 (I still have some CS3 software on my machine). So I scrolled down, found Bridge CS4 and all is just fine. Thanks for the helps and tips. I do appreciate it. And I hope you can forgive my brain fart.

Similar Messages

Hidden tab won't close, constantly loading.

There's a tab on my Firefox that doesn't show on the window. It seems to be a tab that was previously open, that I thought I'd closed. While it doesn't show on the window, the tab preview when I mouse over it in the windows taskbar shows that the tab is still open. When I click the x in the preview, the tab won't close. Also on mousing over the tab, it shows that the page is blank, but it seems as though it is loading something. It may or may not be causing my computer to run slower than usual, but I can't be sure. Either way, it's annoying and the only way I can get rid of it is by restarting my browser, but even then after using the browser for a while another tab like that shows up and I run the same problem. How do I close a tab like this?
Extra notes:
The tab is not open from the start. It is not a homepage, as my homepage is set to about:blank, and opening a homepage upon starting my browser is disabled.
The tab is not visible on the Firefox window. It is only visible on the windows preview when mousing over the Firefox application in the windows taskbar.

You can check for problems with the sessionstore.js and sessionstore.bak files in the Firefox profile folder that store session data.
Delete the sessionstore.js file and possible sessionstore-##.js files with a number and sessionstore.bak in the Firefox profile folder.
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Multiple_profile_files_created
Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost and you will have to recreate them (make a note or bookmark them if possible).
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
You can check for problems with preferences and rename or delete the prefs.js file and possible numbered prefs-##.js files and a possible user.js file to reset all prefs to the default value.
*http://kb.mozillazine.org/Preferences_not_saved
*http://kb.mozillazine.org/Resetting_preferences

Safari refusing to close after loading mountain lion

After loading the safari update to my new mac mini - I find that safari will not close - I have to force close the application.

right click the icon in the dock, force quit

Mail won't close after security update

I just installed the recent security update (running 10.4.8) and now Mail won't close on either my Dual g% tower or on my iBook. In fact, both computers were unable to reboot after the install because the mail program needed to be force quit.
This was never a problem prior to the install of the security update.
Anyone have any ideas?
Thanks!

Problems arising right after installing a system update are usually the result of the problem already being there, or not having installed the update properly, or ignoring Apple’s "Important: Please read before installing" warnings, etc., rather than being caused by the update itself. In order to ensure that the update is installed properly, proceed as follows.
Verify/repair the startup disk (not just permissions), as described here:
The Repair functions of Disk Utility: what's it all about?
After having fixed all filesystem issues, if any, reinstall the update that appears to not have been installed properly.
Take a look at the following articles for guidelines on how to properly install system updates:
Troubleshooting installation and software updates
Installing software updates
Basically, you should verify/repair the startup disk before installing the update, no applications should be running while installing it, and you may experience unexpected results if you have third-party system software modifications (not normal applications) installed.
The above won’t solve the problem, but will allow us to at least troubleshoot it properly. Post back with your observations when done.
How many accounts do you have and what type are they (POP, IMAP, .Mac)?
In Mail, open Window > Activity Viewer. What do you see there when Mail refuses to quit? Actually, you may be able to avoid having to force quit Mail by canceling whatever it’s doing (by clicking on the red stop icon of the activity).
Do you have any Mail plug-ins or any system utilities that could interfere with Mail? In the Finder, go to each of the following folders (if they exist). What do you see there?
/Library/InputManagers/
~/Library/InputManagers/
/Library/Mail/Bundles/
~/Library/Mail/Bundles/
Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder. You can easily locate any of the folders referred to in this post by copying the file path here, doing Go > Go to Folder in the Finder, and pasting the file path there.

DNG converter won't open CR2 files for conversion: no items match your search [was: Please help!!!!]

Hello, I am stressing out!! I have downloaded the DNG converter and whenever I try to click on the folder to convert it, it says no items match you're search, I can view the pictures in my desktop just not with the converter. I use windows 8 PC and the file type I'm trying to convert is CR2
if anyone out there knows what's going on please help, I'm second shooting at a wedding next weekend so NEED it sorted by then the thought of a whole day shooting and no results isn't even worth thinking about!
Thank you x

Ok so it's a canon 1200d, it's the 8.7 version. And in using Lightroom 4, it's strange because the first time I plugged it in it worked and I managed to edit all my picture and now I've taken more pictures it doesn't seen to work.
Sent from my iPhone

DNG Converter won't recognize Canon Powershot S95 CR2

I've just installed the latest version (6.2) of DNG Converter. When I point it to a small directory (5 files) of .cr2 files from my Canon Powershot S95, it gives me the following message: “The source folder does not contain any supported camera raw files.” It works fine with .nef files from a Nikon D80. I notice that the list of cameras in the Documents and Settings/All Users/Application Data/Adobe/Camera Raw/Camera Profiles folder includes the S90 but not the S95. Is there really a difference between the files produced by the two, or am I making a mistake somewhere?

Thank you.
Dirck
email: [email protected]

Adobe 7.X DNG converter won't display "action buttons" at botton

Hello,
I have a new camera and upgraded to Adobe Digital negative converter ver. 7.3 to support it. Oddest thing. It cuts off the bottom. The "action buttons" [about DNG converter] [extract] [convert] or [exit] buttons at the bottom soI cant execute the program. (see below) I've also tried Ver 7.2. Same issue. Ver 6.2 works fine.
Has anyone had this issue. Any known fix?
I'm on Win7 w/ 1080p displays. I've tried different display settings.
Please help if you can.
Thanks and regards,
Guy

Have you tried setting your monitor display to native resolution?

After sorting photos into albums, the albums disappeared on me. I dragged and dropped the photos and went back to check that they were in place before exiting the program. When I went back, the folder was there but no albums. Help!

Working on an IMac - with IPhoto v.9.6
This is my first experience with IPhoto... trying to move files from a PC over to a Mac.
I don't have a ton of photos but I created about 6 albums - standard albums - and dragged and dropped individual photos into each of the albums. I named each of the albums as well so I would know what was in each. After i was finished, I created a folder called 2014 and moved each of the albums into that folder. Before moving ANY of the albums, I opened each of them up to make sure that all the photos I wanted in each were indeed there - and since there were some errors on my part, I deleted any duplicates first. SO, I KNOW the photos were actually in each of the albums BEFORE i moved them into the 2014 folder.
My intention was to then delete the photo files in my document file but once I got there I thought I would go back and double check the IPhoto file just to make sure... and the pictures were NOT in the albums where I had placed them... is there a need to save this before you move on and if so, to where and how? I was under the impression that once files were moved to albums, they remain there.
The photos are still in the photo library but unsorted now again... I cannot even open the 2014 folder at this point.
Thanks for any help!!

Was back on IPhoto this morning. The folder did not open at all so I deleted it. Beside Albums, nothing showed at all. It was like I had done no work at all except to import my photo folder. Nothing was in my trash bin either.
I started again and created one album at a time. I dragged and dropped photos into the album and exited out of IPhoto, opened up other programs and then returned to IPhoto to see if the album was still there and it was this time. I created a second album and did the same thing. This time, for some reason, the albums seem to be staying in place. I am not doing anything differently than last time. After creating three albums, I created a folder called 2014 and dragged and dropped the three albums into the folder and exited IPhoto. They were still there when I returned - YEAH! It seems to be working - for now! I am keeping my fingers crossed that my photos are not going to disappear but I am not going to delete my photo folder from my files just in case!
Thanks for the suggestions but this may just have been a funny glitch... not sure what happened. I didn't change anything or do anything differently this time except that I am doing it one album at a time and exiting the program between creating each of them and coming back to check... very strange.

Photoshop CC closes after loading

I'm running Windows 7 Professional 64-bit. 8gb RAM, 250gb SSD drive. After I've installed Photoshop CC and start the app, it loads, displaying the splash screen and when the environment appears, it stays up for 1 or 2 seconds then closes. Both the 32 and 64 bit versions of Photoshop do this. I've run the Adobe CC Cleaner app and re-downloaded and installed the Photoshop app, which doesn't solve the problem. Anyone out there have the same problem or heard of this before? Thanks.

Please go through each of the steps listed here: http://helpx.adobe.com/x-productkb/global/troubleshoot-system-errors-freezes-windows.html

JSP page do not close after loading a file

Hello, i am having a bit of a problem. i have the following code that help me load reports (pdf and xls) from my server in the user browser.
What i do in my code : jsp Page 1(generationInProgress) i create one of these reports (xml with blob) --> jsp page 2(viewReport) i load the file into the page.
My problem is pdf just go directly in the user brower but xls file(this file look like it is my page viewReport but in excel format) need to be downloaded into the user pc (work fine) but the first page (generationInProgress) stay visible.
This is in viewReport:
public void openFile()
System.out.println("openFIle");
//retrieve the report information
String fileName = sessionBean.getReportName();
//load the files
File reportFile = new File(mainPathL2, fileName + "." + sessionBean.getReportFormat());
File xslFile = new File(mainPathL2, fileName + ".xsl");
//download file
try
if(reportFile == null)
System.out.println("report file is null");
else
System.out.println(reportFile.length());
//send the pdf file to screen
HttpServletResponse response = (HttpServletResponse)facesContext.getExternalContext().getResponse();
if(sessionBean.getReportFormat().equals("xls"))
response.setContentType("application/vnd.ms-excel");
else
response.setContentType("application/pdf");
if(reportFile.length() != 4096){
FileInputStream fis = new FileInputStream(reportFile);
ServletOutputStream out = response.getOutputStream();
byte[] outputByte = new byte[(int)reportFile.length()];
while(fis.read(outputByte) != -1)
out.write(outputByte);
fis.close();
out.flush();
out.close();
} catch (IOException e)
// Do your error handling thing.
System.err.println("Download file failed: " + e.getMessage());
e.printStackTrace();
//delete files
reportFile.delete();
xslFile.delete();
facesContext.responseComplete();
} //end openFile() method
Anyone can offer some help ?

no on ever had that problem ?

Firefox won't close after checking plugins

I do a plugins check B4 I close Firefox, then I always run CCleaner after that, but lately CCleaner has been telling me that I still have a browser open and asks if I want it to close Firefox, if I tell it "yes" then it says it is taking too long do I want it to force Firefox to close! I have not changed anything, upgraded, or uninstalled anything. I am running the latest version of Firefox (not Beta) it is the only browser I use. I run Windows XPPro, and work on a IBM ThinkPad T42p.

See "Hang at exit":
*http://kb.mozillazine.org/Firefox_hangs
See "Firefox hangs when you quit it":
*https://support.mozilla.org/kb/Firefox+hangs

Trying to fix - Acrobat won't close after user clicks attach and then emails.

I'm totally stumped, so any input may help. Here' s the scenario... User creates/opens PDF. They then go to either attach dialog which then opens Outlook email dialog. They finish emailing the attachment and switch back to the Adobe window to close it. Upon clicking the usual red "X" on Windows 7, nothing happens. Alt-F4 doesn't work neither, neither does Ctrl-W to close the document. Adobe isn't really "frozen" because I can go to File->Properties just fine and the dialog opens. It seems to be isolated to closing the app.
Update: It only happens after sending and the outlook window autocloses. I don't think Acrobat is aware of the email window closing, but is waiting for it to close. I tried to close the Adobe window while the new email window was still there and Adobe kicks me back to it. If I close the email and don't send then I can close Adobe. If I send, and the window autocloses, then Adobe window will not let me close.
10.1.6 Seems working on another system. Is there a way to roll back?
Windows 7
Acrobat 10.1.9.22

Try giving your iPad a reset. Hold down the sleep and home keys for about 20 seconds. When you see the silver apple, let go and let it reboot and try again.
How are you charging it? its's best charged plugged into the wall not via USB. So if you're trying via USB, try using the supplied power block plugged into the wall.

Outlook won't close after iTunes update

Any one else notice this after the last iTunes / Quicktime update?
After the most recent iTunes update, Outlook 2003 will no longer close completely. It stays active in the systray (that's the bottom right of the screen with the time) even though it's been closed appropriately.
The reason this is a problem is the following:
- Outlook continues to pull mail off the POP server. My wife's iphone never sees new email because it's already been pulled by Outlook.
The workaround is to log completely off of that windows account so Outlook is forced to close. (There are several other workarounds, but that one is easy...)
Any ideas?

I'm having a similar problem - since I updated to iTunes 10, my Outlook 2007 just isn't working properly. When I close Outlook, it doesn't compeltely close. Like you, I have the grey Outlook icon in the status bar and have to close it (which probably isn't doing wonders for the .pst file) Disabling the Change Notifier doesn't seem to make any difference. Also when I actually have Outlook open, my messages are not being sent or received correctly - it seems to just sit there saying receiving message X of X and doesn't do anything else.

Div Slider won't close after it opens

Hello,
I'm playing around with some social media sliders and am running into a bit of trouble.
I am starting with the Facebook slider. It opens perfectly fine, however, after that, it will not fully close.
I'm new at this particular task so I thank you in advance for your patience.
http://www.saintleo.edu/SocialMediaSliders/TABS.html
Kind regards,
JK

Hi Jon,
Still working on the same project. Tried to copy the settings for the most part from the working Facebook slider for the Twitter slider, however the tab is inside of the div for some reason.
I can't figure out the difference for the life of me.
I ran it through the validator, but didn't see anything.
Would you mind taking a look? You seem to be pretty confident with this stuff.
Thanks again for the help. I'm trying to learn so I thank you for your patience.
http://www.saintleo.edu/SocialMediaSliders/TABS.html
JK

Acrobat X 10.1.2 won't close after using preflight

Since the update to version 10.1.2 I have a problem with Acrobat X. After having used the preflight function (Tools - Print Production - Preflight) I cannot close the program anymore. I have to do a Control Alt Delete to force the program to quit. Everything is just fine as long as you don't use the Preflight function. I didn't have this problem on previous versions of Acrobat Pro.
I'm using Windows 7 64-bit, Adobe master collection 5.5. The problem occurs on my desktop system as well as on my Sony Vaio notebook.

Problem is the same. My Win 7, 64-bit reporting:
Problem Event Name:
BEX
Application Name:
Acrobat.exe
Application Version:
10.1.2.45
Application Timestamp:
4f02e85c
Fault Module Name:
StackHash_0a9e
Fault Module Version:
0.0.0.0
Fault Module Timestamp:
00000000
Exception Offset:
00000001
Exception Code:
c0000005
Exception Data:
00000008
OS Version:
6.1.7601.2.1.0.256.48
Locale ID:
1026
Additional Information 1:
0a9e
Additional Information 2:
0a9e372d3b4ad19135b953a78882e789
Additional Information 3:
0a9e
Additional Information 4:
0a9e372d3b4ad19135b953a78882e789
Please help!

Loader/DNG Converter won't close after loading photos into Bridge

Similar Messages

Maybe you are looking for