Loader images do not appear when .swf is published.

I have a series of images that I want to be able to swap out
on a weekly basis in my flash piece. I used the image loader to
call them from my webserver, and when I am in flash, editing my
.fla, they appear perfectly. But once I publish the flash piece, a
white box appears in their place, and the images never load.
It doesn't matter whether I publish the flash to the web and
place it in the same folder as the images, or just publish it and
view it from my harddrive... either way, the images do not show in
the .swf... they only show while editing in flash. I am calling
dynamic text from the same server, and it works perfectly. Any help
is appreciated.

Hmm... hard to tell what is going on Josh. Can you provide a
url to the
swf?
Dan Mode
*THE online Radio*
http://www.tornadostream.com
*Must Read*
http://www.smithmediafusion.com/blog
*Flash Helps*
http://www.smithmediafusion.com/blog/?cat=11
"Josh Rose" <[email protected]> wrote in
message
news:e9oqua$ad2$[email protected]..
>I have a series of images that I want to be able to swap
out on a weekly
>basis
> in my flash piece. I used the image loader to call them
from my webserver,
> and
> when I am in flash, editing my .fla, they appear
perfectly. But once I
> publish
> the flash piece, a white box appears in their place, and
the images never
> load.
>
> It doesn't matter whether I publish the flash to the web
and place it in
> the
> same folder as the images, or just publish it and view
it from my
> harddrive...
> either way, the images do not show in the .swf... they
only show while
> editing
> in flash. I am calling dynamic text from the same
server, and it works
> perfectly. Any help is appreciated.
>

Similar Messages

Image does not appear when publishing...does it matter where you import audio?

I have an image on my slide and when I preview the slide it appears correctly, when I hit F10 to preview next 5 sldies or publish file it does not appear. I have imported audio to the slide not to an object. I am wondering if this matters? Any help on this would be greatly appreciated.
Thank you...

Rod -
Cant really explain this one, but the visible check box was checked... I then unchecked it and checked it again, now it seems to be working.....
Weird, but at least it is working.

Images and video do not appear when project is published

Can anyone tell me what is happening when I have inserted video and images into my project, but when I go to publish it, the slide freezes or the images and video do not display.

Hi,
You give very few information: could you please give some more details, such like which version of CP, what kind of images/video, how do you publish and how do you deploy, is all well in Preview mode (also Preview in Browser), how big is the CP (number of slides)... In order to have some idea of possible causes, please provide some details.
Lilybiri

Getting images to NOT appear when field in recordset is has content

Hi
On one of my site pages, i have the latest news being pulled
in, but i only want the latest news story pulled in if the image
field in tbNews contains text. if there is no image then i just
want 3 images (these can be hard coded) to be displayed.
the structure for tbNews
newsID
newsDate
newsSubject
newsStory
image
does anyone know how to do this?
thanks

Hi
thanks for your reply, i would like a bit of help with the
code please, below i have pasted the code i am using:
DynamicImage is image being pulled in from the image field in
tbNews. Image1, image2 and image3 are the images i wanted displayed
if the image field in tbNews is empty. If the image field contains
text then i do not want Image1, image2 and image3 to be displayed.
****CODE****
<div id="Video"> <img
src="uploaded_images/files/news/<cfoutput>#rsLatestNews.image#</cfoutput>"
alt="Latest News" name="DynamicImage" id="DynamicImage">
</a> <img src="images/dvdNoFlash.jpg" alt="other images"
name="image1" width="87" height="92" id="image1" /><img
src="images/dvdNoFlash.jpg" alt="other images" name="image2"
width="87" height="92" id="image2" /><img
src="images/dvdNoFlash.jpg" alt="other images" name="image3"
width="87" height="92" id="image3" /> </div>
RECORDSET:
<cfquery name="rsLatestNews" datasource="DSNGrid">
SELECT *
FROM tbNews
ORDER BY newsDate DESC
Hope im making sense,

Images on Facebook do not appear when using different web browsers

Images on Facebook do not appear when using Safari on my Macbook Pro (I've tried Google Chrome too with the same result). This makes me think it's a setting within OS Mavericks that I'm missing. I have not seen this issue on any other computers. This only occurs on my, and others' profile pictures on my profile page and on the news feed, not photos that are posted in albums or on walls. and yes, i have images enabled in Safari.
In safari the images don't appear, and in their place is a small blue "?" square >>.
In Chrome it appears as a broken image link >>
Has anyone encountered this? Is there a fix? It is very annoying.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

HT201401 While calling a contact his image does not appear it appears only when he calls me

While calling a contact his image does not appear on the screen but when the same contact calls me his image appear on the screen

Hello,
I never drag the group list to mail.
I just type it's name and Mail brings it automatically.
I really don't see the point of starting do what you suggested as it complicate the work flow (using 2 applications to achieve a missing feature...)
I think the point is to simplify things and not complication them.
I need Mail to be flexible, so I can add as many groups or one by one contacts without having the need to use another application and drag from there.
How come no one has thought about that?
very strange and frustrating to know it's not existed in mail.
but thanks anyhow
by the way,
when such a feature missing, does it goes to apple features requests?
shlomit

Images not appear when using SUN IDE. help !

I have the Sun IDE, and I have a problem. The problem is : when I compile using this IDE, Images do not appear.
But when I compile using another IDE such as JPadPro, images appear well.
Thank you !!

[url http://forum.java.sun.com/thread.jsp?forum=10&thread=486965&tstart=0&trange=15]Please post enough code that someone can figure out what it is you are trying to do and what you have done.
[code]public class SomeThing { // YOUR CODE HERE
    private Some some = new Some();
    public Thing thing = new Thing();
    public SomeThing() {
        doSomething(); // do something!!!
    public void doSomethng() {
        some.thing();
        thing.doThatFunky();
[/code]
Use code blocks to make your code more readable. (See [url http://forum.java.sun.com/features.jsp#Formatting][Formatting Help] on the page you post on.)

Image does not appear in applet.

I am reading the book, Teach Yourself Java in 21 Days.
There is an example in Ch.11 that shows how to load an image into the applet.
I have tried to use the code provided as is along with an image as defined in the code. I have also uploaded the html, class and image to a folder on the web. Unfortunately, the image does not appear in the applet. The image does have an image that I created using ms paint.
Here is the code I am currently using from the book:
import java.awt.Graphics;
import java.awt.Image;
public class LadyBug2 extends java.applet.Applet {
     Image bugimg;
     public void init() {
         bugimg = getImage(getCodeBase(),
             "ladybug.gif");
     public void paint(Graphics g) {
         int iwidth = bugimg.getWidth(this);
         int iheight = bugimg.getHeight(this);
         int xpos = 10;
         // 25 %
        g.drawImage(bugimg, xpos, 10,
            iwidth / 4, iheight / 4, this);
         // 50 %
         xpos += (iwidth / 4) + 10;
         g.drawImage(bugimg, xpos , 10,
              iwidth / 2, iheight / 2, this);
         // 100%
         xpos += (iwidth / 2) + 10;
         g.drawImage(bugimg, xpos, 10, this);
         // 150% x, 25% y
         g.drawImage(bugimg, 10, iheight + 30,
             (int)(iwidth * 1.5), iheight / 4, this);
}I tried placing the image in an images folder and I also tried changing the code to getImage(getDocumentBase(), "ladybug.gif")
as well as tried getImage(getCodeBase(), "ladybug.gif") in order to try and grab the image from the same directory as the class file and the html file.
The image file's name is: ladybug.gif
The code in the html file:
<HTML>
<HEAD>
<TITLE>Lady Bug</TITLE>
</HEAD>
<BODY>
<P>
<APPLET CODE="LadyBug2.class" WIDTH=1024 HEIGHT=500>
</APPLET>
</BODY>
</HTML>
I have gotten previous applet examples from the book to work. One of them did have an error in the author's code which I fortunately was able to overcome. This time, I am afraid, the error eludes me.
Thanks in advance.
I do see that there is no start/stop/run in this version, but I believe this should still work because of the init. I am guessing that maybe the problem lies somewhere in there.
Message was edited by:
gnikollaj

According to the javadoc:
getImage
public Image getImage(URL url,
String name)Returns an Image object that can then be painted on the screen. The url argument must specify an absolute URL. The name argument is a specifier that is relative to the url argument.
This method always returns immediately, whether or not the image exists. When this applet attempts to draw the image on the screen, the data will be loaded. The graphics primitives that draw the image will incrementally paint on the screen.
Parameters:
url - an absolute URL giving the base location of the image.
name - the location of the image, relative to the url argument.
Returns:
the image at the specified URL.
I am confused as to how to use the name after the url.
Should it read something like:
bugimg = getImage("http://g.jtrusty.com/JavaApplet/", "LadyBug.gif");
EDIT: I still get the same error, cannot find symbol at getImage.
Message was edited by:
gnikollaj

LR 4 - image does not appear in Preview and will not print`

The selected image appears on the main/center panel but not in the preview screen. Printing results in a white sheet of paper with no image at all. The image has been updated to LR 4 - but made no difference. I've served help and the forums (where i saw mention of similar problems, but no comments or guidance on the problem). What am I doing wrong?

The problem began with the installation of LR4. I print directly from LR4 to my HPZ3100. I routinely select "print preview" in the print dialogue box. Now the first print I see the preview and then it prints. If I select a second print job and use the "print preview" the print preview screen comes up blank and never loads. If I try to delete the print job, it just never responds (resolves) so I have to turn off the computer and the printer and restart to clear the print job. if I don't use the print preview, it prints just fine (except that I'm not able to check what's about to be printed). Thanks for any thoughts you have on this.
Date: Tue, 10 Jul 2012 16:01:47 -0600
From: [email protected]
To: [email protected]
Subject: LR 4 - image does not appear in Preview and will not print`
    Re: LR 4 - image does not appear in Preview and will not print`
    created by Brett N in Photoshop Lightroom - View the full discussion
Bill, if this is only happening some of the time, then we are probably looking at a resource issue. Any pattern in when things won't print? e.g. Certain file type won't but others will? Or is it more of a timing/order thing? e.g. First file prints fine, second does not? VStromee, do no files print for you? Or is it like Bill and sometimes the print and other times they do not? Did you install any new software recently or have any updates to the OS or any application that has printing capabilities?
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4549692#4549692
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4549692#4549692. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop Lightroom by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Images will not appear on Stage area of Adobe Flash Professional

I have Adobe Flash Professional CS5.
Yesterday I successfully created an animation.
Later the same day I tried to create another and the images will not appear on the stage.
I loaded in PNG files - which worked the first time - now they will not show up.
I can see their binding boxes on the stage, and move those but the images just do not show up.
When I hit ctrl + enter to preview, I can see the images in the preview movie - just not on the stage working area!
I tried restarting, shutting down, updating my PC, uninstalling programs, loading different file types (jpg), and resaving and reloading the PNG files. I even tried different types of Flash defaults. NOTHING WORKS.
I hope someone can tell me what is wrong this makes no sense!

Before you drag the image from the library to your stage, make sure you insert a blank keyframe (F6) on the layer you are working with, then drag to stage. This worked for me.

Poster image does not appear in IE

I am having another problem with the poster image feature. In IE7 & 8, the poster image does not appear at all when the player is first loaded. If the page is cached and loaded, the poster image appears fine.
I think this is a bug, but can anyone confirm seeing this or fixing it?
Thanks!

According to the javadoc:
getImage
public Image getImage(URL url,
String name)Returns an Image object that can then be painted on the screen. The url argument must specify an absolute URL. The name argument is a specifier that is relative to the url argument.
This method always returns immediately, whether or not the image exists. When this applet attempts to draw the image on the screen, the data will be loaded. The graphics primitives that draw the image will incrementally paint on the screen.
Parameters:
url - an absolute URL giving the base location of the image.
name - the location of the image, relative to the url argument.
Returns:
the image at the specified URL.
I am confused as to how to use the name after the url.
Should it read something like:
bugimg = getImage("http://g.jtrusty.com/JavaApplet/", "LadyBug.gif");
EDIT: I still get the same error, cannot find symbol at getImage.
Message was edited by:
gnikollaj

Photos do not appear when I'm trying to construct a Book in iPhoto 08

I really hope someone can help me understand why some picture images do not appear in the photo window strip of iPhoto 08, when I go to make a Book. These same images appear in my Library - but just seem to vanish in Book/Project mode!
All the photos from my digital camera seem to appear OK ... but I have noted the images (jpgs) in question are ones I've downloaded from the Net - legitimately from friend's UGC sites (with permission and which do not breach any copyrights).
I cannot work out what is going on - as older images I've previously downloaded from the Net - which were imported into earlier versions of iPhoto - ALL appear! I've also tried renaming the jpgs removing all '&' type symbols and reloading them into iPhoto - but still without success.
Any help will be much appreciated.
Cheers,
axiom303

Hi TD,
Yes they do appear in full size and I can edit them. I've just realized that it's not just photos from the Net that are not appearing - it seems to be happening for all photos I've imported into iPhoto after a certain date.
After spending many more frustrating hours trying to work this out, I found that if I click all of the 'events' which contain the photos I'm after and then create a Book - all these photos appear in the selection window strip. However I still need to work out a proper solution as this still limits me to only those photos in the highlighted 'events' and no new pictures can be added to that particular Book.
Heeeelp please!
axiom303

Photos Do Not Appear When Dragged Into Ibooks Author

I formatted my images to 72 DPI .png files and when i drag and drop them into Ibooks Author I can see them, I can manipulate them, resize, add captions. When I do a test the images appear in the text view portriat mode of the Ipad but when in the landscape mode, the images do not appear. There is just a blank space with a caption. If I create a photo widget and drop the photo inside I am able to see it on the Ipad however that widget does not allow me to resize as I would like. Does anyone have a fix for this issue or an idea?
Thanks
Chris A.

Confirm your process here:
Optimizing performance in your iBooks Author books
...and try jpg for photos instead of png.
And remember - layout in landscape...edit in portrait. Always delete a placeholder image before adding your own.

About Help image does not appear

RoboHelp X5.2 Webhelp output
A logo created as a jpg to be used as an About Help button
will only appear when compiled on my hard drive.
I got rid of the powered by Robohelp button and created a
company image in jpg format for the About Help button.
In my project I double-clicked on the skin, and then the
About Button, selected the jpg for the About Button image, selected
a gif to use in the About Help dialog box, added company
information, company name, etc.
Part of skin code ----------------
<toolbaritem mode="Logo Mode" type="built-in-logo"
id="7">
<name>About</name>
<image>selected:napa_logo_blue.jpg?</image>
I compiled to my local drive. Everything works. The jpg logo
appears on the top right-hand side, and when you click on it, the
About Help dialog box opens with the gif image and other
information.
However, the development team compiled the help along with
the application to one of their test boxes. The jpg image does not
appear. Instead, a small white box with a red x and the words About
Help appears. When you click on this the About Help dialog box
opens with all the correct information including the gif image.
Both images reside in the skin folder on my hard drive. When
I compile the project they reside in the main folder with all the
htm files and js files.
Not sure how to resolve this.
DM

I am also having this problem. I've just converted a project
from RH X5 to RH v7. In X5 the .gif file attached to the About
button worked fine. In RH 7 nothing appears. I've tried adding the
.gif to the Baggage files but it's still broken. Any other
suggestions?

Rendered images are not appearing on the webpage. works fine on IE. All plugins appear to be present includeing Adobe Flash

rendered images are not appearing on the webpage. works fine on IE. All plugins appear to be present including Adobe Flash

If that only happens on a specific page or domain then make sure that you do not block images on that domain.
See [[Images or animations do not show]]
*A way to see which images are blocked is to click the favicon (<i>Site Identification</i> icon) on the left side of the location bar.
*A click on the "More Information" button will open the Security tab of the "Page Info" window (also accessible via "Tools > Page Info").
*Go to the <i>Media</i> tab of that "Tools > Page Info" window.
*Select the first image link and scroll down though the list with the Down arrow key.
*If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.
*You can see the permissions for the domain in the current tab in Tools > Page Info > Permissions
*You can see all image exceptions in Tools > Options > Content: Load Images > Exceptions

Loader images do not appear when .swf is published.

Similar Messages

Maybe you are looking for