Loading 0account hierarchy fails

Hello Gurus,
We recently upgraded to 7.0. We are having an issue while loading 0account hierarchy in Q and P systems using a flat file and we are able to load the same file in D system.
This is the error meassge in Q and P:
'Invalid entry, hierarchy 4AF5AVCDUA0077116VFCD does not exist'
Note: Before the upgrade we were able to load the same file 0account hierarchy in all systems.
My trouble shooting findings are:
In D:
TABLE /BI0/HACCOUNT has field NODENAME and its data element is RSNODENAME CHAR 32
In Q and P:
TABLE /BI0/HACCOUNT has field NODENAME and its data element is RSSHNODENAME CHAR 60
Is this causing the issue or anything else ?
I appreciate your help and I promise right points.
Cheers,
seenu

HI Seenu !!
We faced similar troubles, and we resolve it before update the SP. We are now on 7.0 and the level of sp is 16.
Could you check that first ?
If the level is the same then surelly there are any note for that and i could help you to find out.
Best Regards
Natalia.

Similar Messages

Some accounts in 0ACCOUNT hierarchy MD not loading from ECC

Hi,
I am trying to load 0ACCOUNT hierarchy master data from ECC to BW, using standard data sources. The process is in place in Production and was running fine until couple of days back. All of a sudden, the daily master data load doesn't bring in new accounts added to hierarchy in ECC.
The user responsible for adding and updating new accounts to hierarchy has checked on the ECC, and I have seen the ECC screen. The new accounts are correctly placed in correct hierarchy on ECC side.
I have checked and tried couple of things. The Attr and Text are coming through fine, only hierarchy is not getting updated on BW side. I tried to replicate Metadata for the data source on BW side, I have manually run the DTPs, but still no success.
I will really appreciate your help on this.
Thanks,
Abhishek.

Hi all,
Thanks for your prompt replies. To answer to all the above replies:
1) I am not getting any errors while loading the account hierarchy. The process state is Green. It is just skipping the new accounts. There are no new patches installed in BI, check with Basis team
2) I had checked the ACR, 0ACCOUNT is already included in the process.
3) At ECC side, the team always added the accounts/accounts ranges manually to the hierarchy and it worked well in the past. The hierarchy data source we are using always is either in Modified/Content mode and I assume we cannot activate the hierarchy data sources that is provided by SAP.
3.1) Yes, we have maintained the hierarchy structure at Infoobject level. The attributes and texts are coming through fine and those accounts are already in SAP BI attribute/text, but they are not brought over in hierarchy.
3.2) I am not authorized to access RSHIER/RSH1 T-code.
Thanks,
Abhishek.

Error in loading a Hierarchy

When we are loading a hierarchy in the BW system, we get the following error :
Error in the hierarchy structure: see error log.
We tried activation of the hierarchy data source then rerun the load. Still it fails with the same error.
Please let us knwo if any one has inputs regarding the same.

Please go through the following SAP Notes.
[Note 1266877 - BW hierarchy error when loading|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1266877]
[Note 384945 - BW: Incorrect hierarchy extraction for 0REOBJ|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=384945]
You will also find plent of threads with the same issue. Just search with the key words from the Error Log.
Regards,
Gaurav

Records missing while extracting 0account hierarchy

Bi experts,
Two records have been added by the business to a node in the 0account hierarchy , which can be seen in transaction /nKAH3.
While extracting the MAE 0account hierarchy using a full InfoPackage no errors occur, but when checking the hierarchy in BW both records are missing. The activate checkbox has been selected in the InfoPackage.
Has anyone experienced something simular in the past?
Regards,

Hi,
If once you loaded the Hierarchy, then do the Change run for it.
If the loading was done manually then go to
RSA1 --> Tools --> Apply Hierarchy/Attribute Change Run -- > Click on Hierarchy List Puch Button
Then select the your hierarchy loading and click on save and then click on Execute Hierarchy/Attribute Change Run.
Hope this will solve your problem
With Regards
ARUN
Edited by: Arun Aravapalli on Mar 16, 2010 11:59 PM

How to load a Hierarchy after a change in the R/3 system?

Hi All,
We have a hierarchy in BW hat we extract from R/3. But now they have added two new nodes to the hierarchical structure which is not being reflected in the BW version of the hierarchy. Can you tell me how to load into BW the latest version of the R/3 hierarchy with those two new nodes??
Thanks Much for any Input,
Reddy

Hi Reddy,
If you have modified just the function module to populate the hierarchy in R/3 then the hierarchies should load fine on BW. However if you have changed the datasource and there is a datasource(active) in the transport request in R/3 then you would need to replicate the datasource in BW and then load the hierarchy. Hope it helps.
Bye
Dinesh

Error while loading the Hierarchy from R/3 to BI.

Dear all ,
I am trying to load a hierarchy FROM R/3 to BI . When I am executing the Info package its showing an below Error.
Hierarchy object is u201CWBS elementu201D
The level of the node ID 01494179 does not suit the lev. of the higher lev. node
The level of the node ID 01494178 does not suit the lev. of the higher lev. node
The level of the node ID 01493822 does not suit the lev. of the higher lev. node
Could you please let me know what would be the reasonu2026u2026?
Regards,
Raghu

Hi
looks like there is some inconsistency in hierchy data you are tring to laod.
Check hierarchy in r3 if its ok, if yes try deleting complete hierarchy and reloading it.
You may also chose to adjust it manually
Regards
Sudeep

Error while loading the Hierarchy to 0GLACCEXT

Dear all ,
I am trying to load a hierarchy ZEM 1 that is manually created in R/3. when I am executing the Infopackage its showing an Error that
1.Record 8 :Node characteristic 0GL_ACCOUNT is not entered as hierarchy characteristic for 0GLACCEXT
2.Too many error records - update terminated
and what is the the concept of 0BAL_DPEND to be added as attribute to OGLACCEXT.
Thanks

Hi Dash ,
I am providing the long test for the error ...Also can you tell me how I should use 0BAL_DPEND field as an attribute of Hieararchy of 0GLACCEXT. Coz i am supposed to do this
Hierarchy for Characteristic 0GLACCEXT with Attribute 0BAL_DEPEND
The hierarchy for characteristic 0GLACCEXT is used as the financial statement version in BW queries. To technically enable the particular exception aggregation for contra items, the hierarchy table of characteristic 0GLACCEXT contains the attribute Balance-Dependency of a Hierarchy Node (technical name 0BAL_DEPEND).
The Long Error Message
Diagnosis
 The nodes NODEID = [00000194, 00001627 ] have the same node names
 NODENAME = '10000000950090 '. This is not allowed because neither node
 is a leaf and both nodes are assigned to the same characteristic
 0GL_ACCOUNT .
 Note that a maximum of 50 characters is available for message variables.
 The node name NODENAME = '10000000950090 ' might not be displayed in its
 full length.
System Response
Procedure
 Try to localize the problem. If the hierarchy is loaded from an SAP
 source system, you can check whether the extracted data is correct by
executing transaction RSA3 in the source system. If necessary, check if
the data is modified with a user exit. If the hierarchy is loaded from a
file, check the contents of this file. The problem might also be due to
an error in the transfer rules or in the transformation.
You can identify the two duplicate nodes from the values for the node ID
NODEID = [00000194, 00001627 ].
The problem can be caused by identical nodes delivered more than once
from the source. It is also possible that incorrect values for
parameters such as the node name NODENAME or validity period [DATEFROM,
DATETO] are the cause of the problem.
First check if the value for node name NODENAME = '10000000950090 ' is
correct. The node name consists of the characteristic value for the
hierarchy basic characteristic and the characteristic values of all the
characteristics compounded to this characteristic. Errors creating the
node name often result in duplicate nodes. This problem also occurs if
the node names of all nodes are initial.
If the structure of the hierarchy is defined as time-dependent, the time
validity of a node can be restricted with the fields DATEFROM and
DATETO. Duplicate nodes generally do not occur if the validity intervals
of two nodes do not overlap in time. In this case check if the fields
DATEFROM and DATETO are correctly filled.
In this case the duplicate nodes are not leaves. If you want to reuse an
existing subtree at another location in the hierarchy, you can refer to
this subtree with a link node. Possibly one of the two duplicate nodes
were incorrectly not marked as link nodes.
please Suggest What to do

I have elements 7 loaded on my laptop. I bought a new one and want to load it onto the new one. I talked to someone on adobe site last night and he gave me a link to down load it. it failed so i googled it, and the downloaded it just fine. I went on to th

i have elements 7 loaded on my laptop. I bought a new one and want to load it onto the new one. I talked to someone on adobe site last night and he gave me a link to down load it. it failed so i googled it, and the downloaded it just fine. I went on to the adobe site signed in and looked at my product history and got the product #, however, when i entered the product # i it didn't likeit. What do i do?

Is your laptop running Windows XP, windows 7 or Windows 8/8.1? If so then I suggest download a tool that will retrieve the serial number from the old laptop which you can use it on your new machine. The tool is called:
Belarc Advisor
It can be downloaded from here:
<http://www.belarc.com/Programs/advisorinstaller.exe>
Install this and then run it by double clicking on its icon and then wait for about 5 minutes while it generates all the info about your machine and software keys.

Problem in Loading Material Hierarchy

Hi,
I am having problem while loading material hierarchy from R/3. Whenever i execute infopackage for infosource 0MATERIAL, I am getting following error msg.
The node name for ID 00005983 contains invalid characters
Diagnosis :
Node name DVD77ELR-D2 with node ID 00007774 contains lower case
letters or characters that are not permitted.
System response:
Processing was terminated
Procedure:
Change the node name so that it only contains permitted characters.
Procedure for System Administration
As a result the Request is in RED state.
Please suggest any solution ASAP.
Regards
Prasad
Note: Ponits will be awarded for fast and correct response.

Hi...
Thank you all for reply.
I have solved the problem. But this was not related to RSKC.
This was due to a material code DVD77ELR-D2 which was not created correctly. I have removed the hierarchy assigned to this material and marked it for deletion.
Now the hierarchy has been loaded perferctly.
Regards
Prasad

Flat File loading into Hierarchy

Dear Gurus,
I am trying to load a hierarchy from a flat file. I am not able to do it successfully.
I have a small doubt. Do we need to load the master data into the master data table before loading the hierarchy?
Explanation:
I have an info object zcountry and i had added zzone and zstate as external characteristics in hierarchy. the hierarchy structure should be country with 2 nodes zone1,zone2 and zone one should have 2 states under it as nodes. In this case do I need to maintain the master data in the infoobjects before loading the hierarchies with flat file.?
Node ID InfoObject Node Name Link Parent ID Language Short-Txt Medium-Txt Long-Txt
1; zcountry; CountryNode; 0; en; CountryNode; CountryNode; CountryNode;
2; zzone1; SouthZone; 1; en; SouthZoneNode; SouthZoneNode; SouthZoneNode;
3; zstate; AndhraPradesh; 2; en; AndhraPradesh; AndhraPradesh; AndhraPradesh;
4 zstate Karnataka 2 en Karnataka Karnataka Karnataka
5 zzone1 NorthZone 1 en NorthZoneNode NorthZoneNode NorthZoneNode
6 zstate Haryana 5 en Haryana Haryana Haryana
7 zstate Rajastan 5 en Rajastan Rajastan Rajastan
This is how the flat file looks like.
Kindly give me a solution.
Regards
Mohan Kumar.
Message was edited by:
 mohan kumar
Message was edited by:
 mohan kumar

Dear Gurus,
I also followed the same weblog but still i am not able to do that. That is the reason why I asked the question in that detail (with the data I am trying to load).
Regards
Mohan Kumar

Loading the hierarchy of GL account

Hi all,
I am a new to BW,could you tell me how to load the hierarchy of GL account in BW.

Hi,
I would like to know, whether you want to load the hierarchy with flat file or from R/3 ?
With Regards,
PCR

Load custom hierarchy (multiple ownership / parents)

Hi all
Lots of questions below, I just need some input on this..:) Thx. in advance..
I have a question regarding loading a custom Customer hierarchy from SAP CRM to SAP BW. The special thing about this hierarchy is that is a leaf (child) can have multiple parents. E.g.
- Customer C belongs to both Customer A and Customer B. (Shared ownership.)
- Furthermore I have the information that Customer A owns 40% of C and Customer B owns 60% of C.
Is this something that you see I can support in BW, by loading this hierarchy to 0CUSTOMER? Is this at all supported in BW to have leafs with multiple parents?
Let's say I have an infocube and I do not want the key figures for Customer C to sum up for all parents that owns this customer, but I still want to display the relations (e.g. display Customer C under both Customer A and B, but if you look at the result this should not add up twice). Furthermore do you know how I can connect the percentage to the specific relationship and show this in the report?
I have heard about this option called "Linked nodes", where the system creates a reference for a particular node to an original node. Thereby the possibility to display the subtree of a node multiple places in a hierarchy. But I do not know if this is supported for leafs as well?

No one?

0ACCOUNT Hierarchy issue

Hi Guys,
This is related to 0ACCOUNT Hierarchy. I am running P&L PCA report using this hierarchy. A new account group is added in R/3 system. But the same is not appearing in BW system. I checked in the Infopackage (BWP Systems) with the refresh button " available hierarchies from OLTP system" but this hierarchy is not appearing in the infopackage.
It is also not appearing in the other hierarchies too where it is being used.
Can someone tell me what should I do?

if you are able to see the group in KDH3 then disregard my suggestion...sometimes what happens is it might be defined as a set but not as a group...tcode gs03 for sets...i thought that might be the reason why it wasnt showing up in the infopackage...
the new group which was added...is this the top node ?? or is this added as a child node ?...i think in the infopackage you will only see the top nodes....
this particular new hierarchy which was added might be part of a existing parent hierarchy...

OCS on a cluster with Load balancing and fail safe environment

Dear all,
i want to ask is there any documat or hints on how to do an OCS R2 installaiotn on 3 server with RAC option (clustered Fail Safe), how can i install OCS on a cluster with Load balancing and fail safe environment.
plz i need ur help
thanking u
[email protected]

Dear all,
i want to ask is there any documat or hints on how to do an OCS R2 installaiotn on 3 server with RAC option (clustered Fail Safe), how can i install OCS on a cluster with Load balancing and fail safe environment.
plz i need ur help
thanking u
[email protected]

WLS6.1sp1 stateful EJB problem = load-balancing and fail over

 I have three problem
 1. I have 2 clustered server. my weblogic-ejb-jar.xml is here
 <?xml version="1.0"?>
 <!DOCTYPE weblogic-ejb-jar PUBLIC '-//BEA Systems, Inc.//DTD WebLogic 6.0.0 EJB//EN'
 'http://www.bea.com/servers/wls600/dtd/weblogic-ejb-jar.dtd'>
 <weblogic-ejb-jar>
 <weblogic-enterprise-bean>
 <ejb-name>DBStatefulEJB</ejb-name>
 <stateful-session-descriptor>
 <stateful-session-cache>
 <max-beans-in-cache>100</max-beans-in-cache>
 <idle-timeout-seconds>120</idle-timeout-seconds>
 </stateful-session-cache>
 <stateful-session-clustering>
 <home-is-clusterable>true</home-is-clusterable>
 <home-load-algorithm>RoundRobin</home-load-algorithm>
 <home-call-router-class-name>common.QARouter</home-call-router-class-name>
 <replication-type>InMemory</replication-type>
 </stateful-session-clustering>
 </stateful-session-descriptor>
 <jndi-name>com.daou.EJBS.solutions.DBStatefulBean</jndi-name>
 </weblogic-enterprise-bean>
 </weblogic-ejb-jar>
 when i use "<home-call-router-class-name>common.QARouter</home-call-router-class-name>"
 and deploy this ejb, exception cause
 <Warning> <Dispatcher> <RuntimeException thrown b
 y rmi server: 'weblogic.rmi.cluster.ReplicaAwareServerRef@9 - jvmid: '2903098842
 594628659S:203.231.15.167:[5001,5001,5002,5002,5001,5002,-1]:mydomain:cluster1',
 oid: '9', implementation: 'weblogic.jndi.internal.RootNamingNode@5f39bc''
 java.lang.IllegalArgumentException: Failed to instantiate weblogic.rmi.cluster.B
 asicReplicaHandler due to java.lang.reflect.InvocationTargetException
 at weblogic.rmi.cluster.ReplicaAwareInfo.instantiate(ReplicaAwareInfo.ja
 va:185)
 at weblogic.rmi.cluster.ReplicaAwareInfo.getReplicaHandler(ReplicaAwareI
 nfo.java:105)
 at weblogic.rmi.cluster.ReplicaAwareRemoteRef.initialize(ReplicaAwareRem
 oteRef.java:79)
 at weblogic.rmi.cluster.ClusterableRemoteRef.initialize(ClusterableRemot
 eRef.java:28)
 at weblogic.rmi.cluster.ClusterableRemoteObject.initializeRef(Clusterabl
 eRemoteObject.java:255)
 at weblogic.rmi.cluster.ClusterableRemoteObject.onBind(ClusterableRemote
 Object.java:149)
 at weblogic.jndi.internal.BasicNamingNode.rebindHere(BasicNamingNode.jav
 a:392)
 at weblogic.jndi.internal.ServerNamingNode.rebindHere(ServerNamingNode.j
 ava:142)
 at weblogic.jndi.internal.BasicNamingNode.rebind(BasicNamingNode.java:36
 2)
 at weblogic.jndi.internal.BasicNamingNode.rebind(BasicNamingNode.java:36
 9)
 at weblogic.jndi.internal.BasicNamingNode.rebind(BasicNamingNode.java:36
 9)
 at weblogic.jndi.internal.BasicNamingNode.rebind(BasicNamingNode.java:36
 9)
 at weblogic.jndi.internal.BasicNamingNode.rebind(BasicNamingNode.java:36
 9)
 at weblogic.jndi.internal.RootNamingNode_WLSkel.invoke(Unknown Source)
 at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:296)
 So do i must use it or not???
 2. When i don't use "<home-call-router-class-name>common.QARouter</home-call-router-class-name>"
 , there's no exception
 but load balancing does not happen. According to the document , there's must load
 balancing when i call home.create() method.
 my client program goes here
 DBStateful the_ejb1 = (DBStateful) PortableRemoteObject.narrow(home.create(),
 DBStateful.class);
 DBStateful the_ejb2 = (DBStateful) PortableRemoteObject.narrow(home.create(3),
 DBStateful.class);
 the result is like that
 the_ejb1 = ClusterableRemoteRef(203.231.15.167 weblogic.rmi.cluster.PrimarySecon
 daryReplicaHandler@4695a6)/397
 the_ejb2 = ClusterableRemoteRef(203.231.15.167 weblogic.rmi.cluster.PrimarySecon
 daryReplicaHandler@acf6e)/398
 or
 the_ejb1 = ClusterableRemoteRef(203.231.15.125 weblogic.rmi.cluster.PrimarySecon
 daryReplicaHandler@252fdf)/380
 the_ejb2 = ClusterableRemoteRef(203.231.15.125 weblogic.rmi.cluster.PrimarySecon
 daryReplicaHandler@6a0252)/381
 I think the result should be like under one... isn't it??
 the_ejb1 = ClusterableRemoteRef(203.231.15.167 weblogic.rmi.cluster.PrimarySecon
 daryReplicaHandler@4695a6)/397
 the_ejb2 = ClusterableRemoteRef(203.231.15.125 weblogic.rmi.cluster.PrimarySecon
 daryReplicaHandler@6a0252)/381
 In this case i think the_ejb1 and the_ejb2 must have instance in different cluster
 server
 but they go to one server .
 3. If i don't use "<home-call-router-class-name>common.QARouter</home-call-router-class-name>",
 "<replication-type>InMemory</replication-type>" then load balancing happen but
 there's no fail-over
 So how can i get load-balancing and fail over together??


 I have three problem
 1. I have 2 clustered server. my weblogic-ejb-jar.xml is here
 <?xml version="1.0"?>
 <!DOCTYPE weblogic-ejb-jar PUBLIC '-//BEA Systems, Inc.//DTD WebLogic 6.0.0 EJB//EN'
 'http://www.bea.com/servers/wls600/dtd/weblogic-ejb-jar.dtd'>
 <weblogic-ejb-jar>
 <weblogic-enterprise-bean>
 <ejb-name>DBStatefulEJB</ejb-name>
 <stateful-session-descriptor>
 <stateful-session-cache>
 <max-beans-in-cache>100</max-beans-in-cache>
 <idle-timeout-seconds>120</idle-timeout-seconds>
 </stateful-session-cache>
 <stateful-session-clustering>
 <home-is-clusterable>true</home-is-clusterable>
 <home-load-algorithm>RoundRobin</home-load-algorithm>
 <home-call-router-class-name>common.QARouter</home-call-router-class-name>
 <replication-type>InMemory</replication-type>
 </stateful-session-clustering>
 </stateful-session-descriptor>
 <jndi-name>com.daou.EJBS.solutions.DBStatefulBean</jndi-name>
 </weblogic-enterprise-bean>
 </weblogic-ejb-jar>
 when i use "<home-call-router-class-name>common.QARouter</home-call-router-class-name>"
 and deploy this ejb, exception cause
 <Warning> <Dispatcher> <RuntimeException thrown b
 y rmi server: 'weblogic.rmi.cluster.ReplicaAwareServerRef@9 - jvmid: '2903098842
 594628659S:203.231.15.167:[5001,5001,5002,5002,5001,5002,-1]:mydomain:cluster1',
 oid: '9', implementation: 'weblogic.jndi.internal.RootNamingNode@5f39bc''
 java.lang.IllegalArgumentException: Failed to instantiate weblogic.rmi.cluster.B
 asicReplicaHandler due to java.lang.reflect.InvocationTargetException
 at weblogic.rmi.cluster.ReplicaAwareInfo.instantiate(ReplicaAwareInfo.ja
 va:185)
 at weblogic.rmi.cluster.ReplicaAwareInfo.getReplicaHandler(ReplicaAwareI
 nfo.java:105)
 at weblogic.rmi.cluster.ReplicaAwareRemoteRef.initialize(ReplicaAwareRem
 oteRef.java:79)
 at weblogic.rmi.cluster.ClusterableRemoteRef.initialize(ClusterableRemot
 eRef.java:28)
 at weblogic.rmi.cluster.ClusterableRemoteObject.initializeRef(Clusterabl
 eRemoteObject.java:255)
 at weblogic.rmi.cluster.ClusterableRemoteObject.onBind(ClusterableRemote
 Object.java:149)
 at weblogic.jndi.internal.BasicNamingNode.rebindHere(BasicNamingNode.jav
 a:392)
 at weblogic.jndi.internal.ServerNamingNode.rebindHere(ServerNamingNode.j
 ava:142)
 at weblogic.jndi.internal.BasicNamingNode.rebind(BasicNamingNode.java:36
 2)
 at weblogic.jndi.internal.BasicNamingNode.rebind(BasicNamingNode.java:36
 9)
 at weblogic.jndi.internal.BasicNamingNode.rebind(BasicNamingNode.java:36
 9)
 at weblogic.jndi.internal.BasicNamingNode.rebind(BasicNamingNode.java:36
 9)
 at weblogic.jndi.internal.BasicNamingNode.rebind(BasicNamingNode.java:36
 9)
 at weblogic.jndi.internal.RootNamingNode_WLSkel.invoke(Unknown Source)
 at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:296)
 So do i must use it or not???
 2. When i don't use "<home-call-router-class-name>common.QARouter</home-call-router-class-name>"
 , there's no exception
 but load balancing does not happen. According to the document , there's must load
 balancing when i call home.create() method.
 my client program goes here
 DBStateful the_ejb1 = (DBStateful) PortableRemoteObject.narrow(home.create(),
 DBStateful.class);
 DBStateful the_ejb2 = (DBStateful) PortableRemoteObject.narrow(home.create(3),
 DBStateful.class);
 the result is like that
 the_ejb1 = ClusterableRemoteRef(203.231.15.167 weblogic.rmi.cluster.PrimarySecon
 daryReplicaHandler@4695a6)/397
 the_ejb2 = ClusterableRemoteRef(203.231.15.167 weblogic.rmi.cluster.PrimarySecon
 daryReplicaHandler@acf6e)/398
 or
 the_ejb1 = ClusterableRemoteRef(203.231.15.125 weblogic.rmi.cluster.PrimarySecon
 daryReplicaHandler@252fdf)/380
 the_ejb2 = ClusterableRemoteRef(203.231.15.125 weblogic.rmi.cluster.PrimarySecon
 daryReplicaHandler@6a0252)/381
 I think the result should be like under one... isn't it??
 the_ejb1 = ClusterableRemoteRef(203.231.15.167 weblogic.rmi.cluster.PrimarySecon
 daryReplicaHandler@4695a6)/397
 the_ejb2 = ClusterableRemoteRef(203.231.15.125 weblogic.rmi.cluster.PrimarySecon
 daryReplicaHandler@6a0252)/381
 In this case i think the_ejb1 and the_ejb2 must have instance in different cluster
 server
 but they go to one server .
 3. If i don't use "<home-call-router-class-name>common.QARouter</home-call-router-class-name>",
 "<replication-type>InMemory</replication-type>" then load balancing happen but
 there's no fail-over
 So how can i get load-balancing and fail over together??

Loading 0account hierarchy fails

Similar Messages

Maybe you are looking for