Loading 0IC_C02 infocube -- some clarifications

Hi BW experts,
I have loaded data into 0IC_C02(matreials movements) infocube using the datasource 2lis_03_s195. It is an initialization load. The data has been successfully loaded. Now my point is, as this cube is related to inventory management is there any certain proceedure to follow in loading, compressing & running queries on this cube. your clarifications will be highly appreciated.
thanks & regards.

Hi Vamshi,
Check these links:
Inventory Management
Re: Inventory Management
Besides these you would find lots of links on IM in these forums.
Bye
Dinesh

Similar Messages

Reviewed documentation on Reporting: I will appreciate some clarification

Hi,
Reviewed documentation on Reporting: I will appreciate some clarification:
1. Can you help me understand what "Staging" means as used here:
A data warehouse system serves primarily to stage information from various data source
The information is staged in various forms including personalized reports, freely definable queries, and predefined reports.
2. Is RemoteCube the same as Virtual Cubes? if not, what is the difference?
3. Can you help me understand what "flexible update" means as used here:
Characteristic InfoObjects have to be included in the InfoProvider tree in the Data Warehousing Workbench to make them available as data targets for flexible updates and as InfoProviders for reporting.
4. "DataStore Objects are available for transaction data and for master data."
When do we decide to store master data in a DSO?
5. Formula Collision vs. "Exception Aggregation"
I understand what formula collision is about but is it the same as "Exception Aggregation"?
If not, do you have a real-life example to help me understand the concept of "Exception Aggregation"?
The documentation/link is not helping.
6. i. With the followin limitation on Display attribute, why not always make the attribute Navigational?
"You can show Display Attributes in a report in the drilldown. However, navigation steps are not possible. (For example, you cannot choose values from a display attribute as a filter.)"
ii. Any example where Nav Attrib does not make sense but it must be Display attrib?
Thanks

Hi Amanda,
2. Is RemoteCube the same as Virtual Cubes? if not, what is the difference?
Yes, they are one and the same.
3.Can you help me understand what "flexible update" means as used here:
Characteristic InfoObjects have to be included in the InfoProvider tree in the Data Warehousing Workbench to make them available as data targets for flexible updates and as InfoProviders for reporting.
in 3.x, you have infosources and not transformations. So you have basically two types of infosources, direct update and flexible update.
Direct update infosources do not have any update rules. These are used for master data loading since the format of data is usually fixed as in fields etc.
Flexible update datasources have update rules, which means that you can use it for loading pretty much anything. You can load master data by changing the update rules and you can use the same infosource for loading transactional data as well. What the statement means is that the infoobject has been set as an infoprovider. and therefore it can be used as a source in a query. The loading is done via flexible updates.
More info on direct and flexible updates can be found here :[3.x InfoSource Types|http://help.sap.com/erp2005_ehp_04/helpdata/EN/87/3fdf9587f211d5b2ff0050da4c74dc/frameset.htm]
5)Formula Collision vs. "Exception Aggregation"
I understand what formula collision is about but is it the same as "Exception Aggregation"?
If not, do you have a real-life example to help me understand the concept of "Exception Aggregation"?
The documentation/link is not helping.
I'm glad that you understand what formula collision is...since its a difficult concept. Exception aggregation is much simpler.
For every key figure that is present in BW, there are two types of aggregations that can be maintained.
Standard: can be sum etc.
and exception aggregation like avg etc. When you do this, you need to give a reference characteristic. By default this is time. and usually it is summation. Now when you drilldown in your query based on the ref. characteristic, the exception aggregation is used.
Eg [http://help.sap.com/saphelp_nw70/helpdata/en/d2/e0173f5ff48443e10000000a114084/frameset.htm]
6. With the followin limitation on Display attribute, why not always make the attribute Navigational?
"You can show Display Attributes in a report in the drilldown. However, navigation steps are not possible. (For example, you cannot choose values from a display attribute as a filter.)"
ii. Any example where Nav Attrib does not make sense but it must be Display attrib?
Essentially this is a preference or a personal choice basically. You can have several attributes. but keeping all of them as navigational does not help and degrades system performance as they have to be interlinked. For eg.
You have an employee ID as your characteristic.
attributes are as follows
Date of birth
division
salary stack
*** etc
now things like division,salary stack and *** could be used as filters in a query but date of birth would in general not be used as filter and hence would make no sense to use it as a navigational attribute(unless you want to find all employees whose birthday is a certain date ).
In the end, it just comes down to the requirement. If you are required to put a filter on an attribute of master data, then it needs to be a nav. attribute else a display attribute would suffice.
Hope this helps.
Regards.

Screen shots of loading a infocube

Hi All,
I am confused about how to load a infocube.
Can some one send me the how to create and load a infocube, which can starting from creating info object,that would be great help.
pls send it to my email id :: [email protected]
Thanks in advance,
Sireesha

Hi Sireesha,
The steps for creating an Info cube and data loading
1. It is same as creating an Info cube in BW 3.5
2. Here once u created an info cube,assign dimesions to it.
3. Create application component, info source similar to BW 3.5.
4. After creating info source, right click on it
5. Here all the dimensions and key figures are mapped automatically in transformation rules.
6. Right click on info cube find the option : Create Data transfer Process
7. create an info package, as usual and schedule the package to load the data into an Info provider.
**Pls assign points if info is useful*
Regards
CSM Reddy

Delta Load to Infocube

Hi,
I am facing an issue with delta load to infocube.
Let me give you the scenaario - I have a standard Infocube and a DSO.
Data gets loaded to the infocube daily using Delta with filter on sy-datum.
There a new Key figure which is added as part of the DSO and Infocube recently.
Our requirement is - we have to populate history for that specific key figure in the DSO and subsequently to the Cube whithout any data duplication for already existing Key figures.
Hence, we have created a self loop on the DSO updating only the specific key figure.
Before loading the data into the DSO, while setting the already existing DTP which takes sy-datum is filter to " Initial Update Set".
Its giving an error which says "Overlapping Selection criteria for DTP".
Is it something like we cannot change the setting of an already existing DTP?
If i do a full data will get duplicated for the past dates, hence delta is the only solution.
But how to go about delta then?

Jaya,
If i understand corrctly..... Data getting loaded from DSO to CUBE through delta with some selection. New keyfigure added to DSO & CUBE ... right...??
To populate new KF, self loop created(DSO --> DSO) with required mappings(keyfields and new KF).
Just do full load from DSO --> DSO and push delta to cube. No need to keep any filters while loading from DSO to DSO. Populate new KF for entire data, and while pushing to cube filter is already available at DTP(use exising delta mechanism only from DSO to CUBE). No need of any full load from DSO to CUBE.
Hope it Helps
Srini

I need to load an InfoCube from an InfoSet - Is this possible in 2004s?

Greetings,
This question looks long, but it's really not. I'm just trying to give a lot of detail about the screens that I am seeing. Anyway, here goes:
I am in 2004s. I want to load an InfoCube from an InfoSet. I know that an InfoSet is just a view and does not physically store data, but recent documentation published by SAP seems to indicate that this is
possible in 2004s (There is a document called "Developer Guide - 2004s" that says the following:
"InfoSets are an additional, easily manageable data source for generic data extraction. They allow you to use logical databases of all SAP applications, table
joins, and further datasets as data sources for BI". )
So... that led me to believe an InfoSet could load an InfoCube. In other words, the InfoSet would be the source and the InfoCube would be the target. I am in RSA1, and I right-click on the cube that I want to be the target. I select the "Create Transformation" option from the context menu. In the "Create Transformation" screen that pops up, I enter "InfoCube" in the target object type field and the name of the InfoCube in the target name field. I enter "InfoSet" in the source object type field and the name of the InfoSet in the source name field.
I get a pop-up that says "Cannot generate proposal". I click the green arrow, and then I get an error message
that says "Transformation does not exist (see long text)".
When I click on the error message, I get the following information in the Performance Assistant:
"Transformation does not exist (see long text)
Message no. RSTRAN010
Diagnosis
The transformation specified by transformation ID , source and target , does not exist.
System Response
The system terminates processing."
Any help would be much appreciated! It seems like it must be possible to use an InfoSet as a source in a data load, or else it would not be an option in the "Create Transformation" screen. ????
I've also tried right-clicking on the cube and selecting "Create Data Transfer Process". I enter the same information on this screen: the types and names of the source and target. Then I get a pop-up that says "Source and target have not been linked with a transformationDo you want to generate a default transformation?". There are two buttons I can click: one labeled "Yes" and one labeled "Abbrechen". I choose "Yes", because I have no idea what "Abbrechen" means.
Then I get the same pop-up from before: "Cannot generate proposal". I hit the green arrow, and I'm back in the
"Create Data Transfer Process" screen. So... I'm stuck in an infinite loop of screens that I can't get out of.
If someone could help, I would be grateful! THANK YOU VERY MUCH!

Thank you so much, Ram! I REALLY APPRECIATE YOUR HELP!
I am wondering if it possible to manually create a node in RSA6 for the InfoSet. I tried it by doing the following:
I went to RSA6 and clicked on the white icon for "Create Node". I then entered the number "8", followed by the name of the InfoSet. (I entered an "8", because all our DataSources seem to start with an "8". I'm not sure why.)
The DataSource now shows up, but when I double-click on it, nothing happens. When I select it in the hierarchy and then click the icons for "Display" or "Change" or "Check", I just get an error message that says, "You have not selected any DataSources."
Also, do you know where I can get my hands on the white paper?
Thanks again!
Regards,
Sarah-Jane

I keep getting message "mozila Firefox not responding." It takes minutes to down load a site - some times it just gets in a loop and never down loads. Then when I try to click on it again screen goes opaque and i get the same message.

I 'm getting message "Mozila Firefox not responding." It takes minutes to down load a site - some times just gets in a loop and never down loads. The little circle at top just keeps going round in circles .
Then when I try to click on the screen again the screen goes opaque and I get the same message re " Mozilla Firefox not responding" - and it is minutes before I can get back in to close down screen.
I have downloaded Fire fox version 4 and this is still happening.

See:
* http://kb.mozillazine.org/Error_loading_websites

How can I convert my music, and CDs to MP3, for use in my vehicle's AM/FM/ Stereo? I have a 16 GB SDHC Card, that I would like to load up with some of my music.

How can I convert my music, and CDs to MP3, for use in my vehicle's AM/FM/ Stereo? I have a 16 GB SDHC Card, that I would like to load up with some of my music.
Thanks for any help you can furnish.
Ed

Well, this question really belongs in the iTunes forum, which is where you will get fast answers.
Just go to iTunes Preferences. Click on the General icon. Set When you insert a CD to Ask to Import CD. Click on Import Settings. Set Import to MP3 decoder. Make sure you're using Good Quality.
This should deal with your CD's.
With your current music, as long as it does not have DRM restrictions (older iTunes Music did), select the song, right click on the song (or group of songs), pull down to Create MP3 version.

Need some clarification on Replacement Path with Variable

Hello Experts,
Need some clarification on Replacement Path with Variable.
We have 2 options with replacement path for characteristic variables i.e.
1) Replace with query
2) Replace with variable.
Now, when we use "Replace with variable" we give the variable name. Then we get a list for "Replace with" as follows:
1) Key
2) External Characteristic Value Key
3)Label
4)Attribute value.
I need detailed explanation for the above mentioned 4 options with scenarios.
Thanks in advance.
Regards
Lavanya

Hi Lavanya,
Please go through the below link.
http://help.sap.com/saphelp_nw70/helpdata/EN/a4/1be541f321c717e10000000a155106/frameset.htm
Hope this gives you complete and detailed explaination.
Regards,
Reddy

Current Time of Load on Infocube available in query report

Hi Gurus,
I just want to ask if there are available method to include in the query report the most recent time and date of loading of infocube. The requirement is when extracting the bw report, it would show the last time of loading from the infoprovider, from the infocube.
Initial plan is to add a field but where exactly will be the source of the time and date of the infocube loading.
Your inputs are very much helpful.

Hi
if the endgoal is to have in the webi, it is even easier.
Just create your statitistics query in the query designer and insert it as a new query in the webi (in webi you can have more than 1 query) they run sequentially but in my cases just one 1 sec tops. So even no workbook needed.
for the statistics check : (I think i used MP 0TCT_MC01)http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0e5ca3b-95ce-2b10-4d94-864ab29a8b63?overridelayout=t…
grtz
Koen

Loading to Infocube

Hi Gurus,
I did load to InfoCube (Delta).We deleted the full and delta loads from the cube and dso.I am able to load the data Up to DSO is fine now.I executed the DTP from DSO to Cube but it didn't pick any load.Load was successful with Zero records transfered.Please share your thoughts on this issue.
Thanks,
Rani.

Hi,
Please check if you have any Start routine that acts as a filter when transferring data to the infocube.
Also you could check if the request in ODS is available for reporting, if not please update the status accordingly.
Please check the data mart status of the request in ODS also.
Regards,
Nitin

Why after ccleaner mozilla not load images in some websites. How fix it?

Why after ccleaner mozilla not load images in some websites. How fix it?

You can use these steps to block images from a specific domain:
* Open the web page that has the images in a browser tab.
* Click the website favicon ([[Site Identity Button]]) on the left end of the location bar.
* Click the "More Information" button to open the "Page Info" window with the Security tab selected (also accessible via "Tools > Page Info").
* Go to the Media tab of the "Tools > Page Info" window.
* Select the first image link and scroll down through the list with the Down arrow key.
* If you want to block images then place check-mark in the box "Block Images from..." to block the images from that domain.
You can set the permissions for the domain in the current tab in Tools > Page Info > Permissions

How is data loaded from Infocube to Planning area - need technical info

I would like to find out how data is loaded from cube to planning area ,
I know that CUBE has tables, but how does that get loaded to planning area , where is the mapping from which I can compare
data in CUBE and the same data that reaches planning area.
Say for example I have below values in the infocube
Prod1 --> Loc1 -
> available provisioning qty
AAA AB90 100
Then where do i check in the planning area tables ( are there any tables mapped) after running the TSINPUT program, i know it can be checked in the planning book , but i want to check in planning area tables if they exi

Hi ,
The data is loaded from infocube to planning area using update rules. The issue you have mentioned seems to be two requests are having data for the same CVCs in the cube.
Example: For the same CVC, two requests avilable in the infocube. When you copy the data using TSCUBE transaction, whatever data avilable in the cube for the CVC gets copied into Planning Area.
CVC1 - cube - Old Request - 100
CVC1 - cube - Actual Request - 200
CVC1 - Planning Area = 300 ( The value is supposed to be 200, but since the old request also contains data in the cube for the cvc, it gets copied as 300)
Issue : There might two request contains data for the same code
Solution : 1. Check the data in the cube using transaction LISTCUBE 2. Delete old request and check the data agian. 3. If it matches with your requirement, run the TSCUBE again.
Please let me know if you need additional information.
Thanks,
Jeysraj

Need some clarifications on Quality-of-services

Hi Everybody.
I need some clarification on Quality-of-services.the question is which one is better in Quality-of-services (Exactly-Once or Exactly-Once-In-order)?why?wht is the differenc between them?

Hi Narayana
refer the below Urls
make the QOS of file as EO or EOIO and then use this blog,
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
It depends upon the Adapter,Can you please spicific
http://help.sap.com/saphelp_erp2005vp/helpdata/en/41/b714fe5ffc11d5b3ea0050da403d6a/content.htm
Check these blogs written on QoS:
XI Asynchronous Message Processing: Understanding XI Queues
How to deal with stuck EOIO messages in the XI 3.0 Adapter Framework
EO = Exactly Once ( Used in Asynchronous Communication)
EOIO = Exactly Once In Order ( Used in Asynchronous Communication)
BE = Best Effort ( Used in Synchronous Communication)
Best Effort --> Used for Synchronous Calls.
EO and EOIO --> Asynchronous Calls.
EOIO --> Asynchronous with Sequential Processing Guranteed.
http://help.sap.com/saphelp_nw04/helpdata/en/41/b714fe5ffc11d5b3ea0050da403d6a/frameset.htm
For the QOS, u can refer the following library links .
http://help.sap.com/saphelp_nw04/helpdata/en/41/b714fe5ffc11d5b3ea0050da403d6a/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ae/d03341771b4c0de10000000a1550b0/frameset.htm
For receiver channels QoS BE (Best Effort) will result in a
synchronous call (sRFC) , QoS EO (Exactly Once) will create a
transactional call (tRFC) to the BC. For sender channels a synchronous
call (sRFC) will result in a message with QoS BE, a transactional call
(tRFC) will result in a message with QoS EO.
QoS EOIO is not supported by the BC-Adapter.
SAP XI term Quality of service describing how the transmission and process-ing of messages is to be handled. Possible values are:
BE = BestEffort (synchronous call, no transactional guarantees for transmission and processing)
EO = ExactlyOnce (asynchronous call, guarantee for local transactional handling, exactly-once transmission and exactly-once processing)
EOIO = ExactlyOnceInOrder (as for EO but with serialization guarantee on a given queue name).
Pls reward if useful

Why does my Adobe Reader (10.1.3) freeze-up when I down load statements from some websites?

Why does my Adobe Reader (10.1.3) freeze-up when I down load statements from some websites?
When I down load statements from some websites, the pdf freezes and I get a message that the website is not responding and that windows is checking for a solution for this problem. I have uninstalled and reinstalled many times. I really like the Adobe Reader, but I need answers on why this is happening and how to fix it. AN AUTOMATIC UPDATE FROM 08/23/11 DOESN’T CUT IT!!

Acrobat Cleaner Tool
Mylenium

Show ip cef switching statistic output - some clarifications required

Good morning, everyone!
I need some clarifications regarding ouput of show ip cef switching statistic on Catalyst 6k and some entries apply to other platforms as well. Consider output:
#show ip cef switching statistics
       Reason                          Drop       Punt Punt2Host
RP LES No route                      179269          0      12866
RP LES Packet destined for us             0 153061543          2
RP LES No adjacency                12460594          0          0
RP LES Incomplete adjacency           10400          0          0
RP LES Unresolved route                1476          0          0
RP LES Bad checksum                      17          0          0
RP LES TTL expired                        0          0   24725338
RP LES IP options set                     0          0          3
RP LES Fragmentation failed, DF 1757274333          0     481160
RP LES Features                         975          0       5278
RP LES IP redirects                       0          0          7
RP LES Unknown input if                 192          0          0
RP LES Neighbor resolution req     32540982       7290          0
RP LES Total                     1802468238 153068833   25224654
All    Total                     1802468238 153068833   25224654
Questions are:
1) What the difference between rows
RP LES No adjacency
RP LES Incomplete adjacency
RP LES Neighbor resolution req
2) What the difference between rows
RP LES No route
RP LES Unresolved route
3) What does mean collum name - Punt2Host?
I will higly aprecciate your answers! Thnx in advance.

So far I partially have found answer on first question.
RP LES Neighbor resolution req - here counted packets that have no adjacency and they are punted to arp request to send.
RP LES No adjacency - after ARP request sent throttling adjacency is installed for this destination for 2 seconds and all subsequent packets get drop. Those packets are counted here.
RP LES Incomplete adjacency - here packets counted which matches to incomplete adjacencies. Which are stays in adjacency table marked incomplete - as i understand it can happen after arp entry aged out. But those adjacencies must be deleted as well, but as i can see in my environment some of them stays for a while, i am a bit confused here.

Loading 0IC_C02 infocube -- some clarifications

Similar Messages

Maybe you are looking for