Loading a level 0 export from one cube to another w/ fewer dimensions

We have an Essbase cube w/ 13 dimensions. I'd like to take a level 0 export of the current cube and load it into a new cube w/ fewer dimensions. Can I use a load rule against a level 0 export file so that I can ignore a few dimensions that we no longer need? Or is there a better way to accomplish this task?
Thanks.
Terri T.

I used the DataExport and specified wh/ dimensions I wanted to pull for loading into the new cube w/ fewer dimensions. I'm working on the load rule file and have it set up to ignore certain columns. I don't use load rules that often, so I'm having a hard time setting up the load rule to accept multiple months worth of data for a particular intersection. I tried setting up the first data column to March, for example, but it changes the column header to Period instead of showing March and then I am not able to set up the next column for April. What am I missing?
Thanks.
Terri T.

Similar Messages

Load from one cube to another

hi all,
can any one gimme step by step procedure to load data from one cube to another cube in BI7
thanx in advance

Hi Srikanth,
Cube to Cube Load
You need to move some data from one cube to another.
The steps involved are :-
First You need to create 'Export Data Source' from original cube (right-click on the InfoCube and select Generate Export Data Source).
Then, assign the new datasource to new cube. (you may click on 'Source system' and select your BW server and click 'Replicate').
Then, Create DTP and execute.
Lastly, you are ready to load.
Regards
Suresh B.G.

Move data from one cube to another cube

Hi,
I am on BW 3.5 and I have moved the data from one cube to another cube and found that the number of records in the original cube does not match to the newly created cube. for eg. if the original cube contains 8,549 records then the back up cube contains 7,379 records.
Please help me on what I need to look on and if in case the records are getting aggregated then how do I check the aggregating record.
Regards,
Tyson

Dear tyson m ,
check with any update rules in ur transfer.If so check in it.
Just go through these methods for making transfer from one cube to another cube fully without missing data.
Update rules method
if it's updated from ods, you can create update rules for cube2 and update from ods
or you can try datamart scenario
cube1 right click 'generate export datasource'
create update rules for cube2, assign with cube1
rsa1->source system->bw myself, right click 'replicate datasource'
rsa1-> infosource -> search 8cube1 name
(if not get, try right click root note 'infosource'->insert lost node(s)
from that infosource, you will find assigned with datasource, right click and 'create infopackage', schedule and run.
Copy from
While creating the new cube give the cube name in the "Copy from" section. It would copy all the characteristics and Key figures. It would even copy the dimensions and Navigational attributes
Another option is:
The steps for copying the contents of one cube to another:
1. Go to Manage -> Recontruct of the new cube.
2. Select the "selection button"(red , yellow, blue diamond button).
3.In the selection screen you can give the technical name of the old cube, requests ids you want to load, from & to date.
4.Execute and the new cube would be loaded.
Its all that easy!!!!!!
Refer this link:
Copying the structure of an Infocube
Reward if helpful,
Regards
Bala

ABAP Function Module Example to move data from one Cube into Another

Hi experts,
Can any please help out in this ..?
A Simple ABAP Function Module Example to move data from one Cube into Another Cube
(How do i send the data from one client to another client using Function moduel).
Thanks
-Upen.
Moderator message: too vague, help not possible, please describe problems in all technical detail when posting again, BI related? ("cube"), also search for information before asking.
Edited by: Thomas Zloch on Oct 29, 2010 1:19 PM

This is the start routine to duplicate records in two currencies.
DATA: datew   TYPE /bi0/oidateto,
      datew2 TYPE rsgeneral-chavl,
      fweek   TYPE rsgeneral-chavl,
      prodhier TYPE /bi0/oiprod_hier,
      market TYPE /bic/oima_seg,
      segment TYPE /bic/oizsegment.
DATA: BEGIN OF S_DATA_PACK OCCURS 0.
        INCLUDE STRUCTURE /BIC/CS8ZSDREV.
DATA: END OF S_DATA_PACK.
S_DATA_PACK[] = DATA_PACKAGE[].
REFRESH DATA_PACKAGE.
LOOP AT S_DATA_PACK.
    move-corresponding s_data_pack to DATA_PACKAGE.
    if DATA_PACKAGE-loc_currcy = 'EUR'.
      DATA_PACKAGE-netval_inv = DATA_PACKAGE-/bic/zsdvalgrc.
      DATA_PACKAGE-CURRENCY = 'USD'.
      APPEND DATA_PACKAGE.
      DATA_PACKAGE-netval_inv = DATA_PACKAGE-/bic/zsdvalloc.
      DATA_PACKAGE-CURRENCY = 'EUR'.
      APPEND DATA_PACKAGE.
    else.
      DATA_PACKAGE-netval_inv = DATA_PACKAGE-/bic/zsdvalgrc.
      DATA_PACKAGE-CURRENCY = 'USD'.
      APPEND DATA_PACKAGE.
    endif.
ENDLOOP.
This is to load Quantity field
RESULT = COMM_STRUCTURE-BILL_QTY.
This is to load Value field
RESULT = COMM_STRUCTURE-NETVAL_INV.
UNIT = COMM_STRUCTURE-currency.

Partitioning two Years Of Data From One Cube Yo Another

Hi Experts,
Can any one please help me on the following issue.
I got the requirement where I need to copy the data from one cube to another having unequal number of dimensions.
I have achieved this using Transparent partitioning, But I could be able to copy only one year data.
In cube1 I have the months like Jan, Feb...Dec and in cube2 I have the structure like Jan-11..Dec-11, Jan-12...Dec-12.
While creating the partition how can I map the Jan with Jan-11 and Jan-12.
Thanks In Advance,
Ram

You can map manually. it is possible.

Loading Data from one Cube into another Cube

Hi Guys,
I am trying to load data from one cube A to another cube B. Cube A has data around 200,000 records. I generate export datasource on Cube A. Replicated the datasource and created InfoSource and activated it.
I created update rules for Cube B selecting Source as Cube A. I do have a start routine to duplicate records in Cube A. Now when I schedule load,
It stops at Processing Datapacket and says no data. Is there something wrong with the update routine or is there any other way to load form cube to cube in a simpler way?
Thanks in advance

This is the start routine to duplicate records in two currencies.
DATA: datew   TYPE /bi0/oidateto,
      datew2 TYPE rsgeneral-chavl,
      fweek   TYPE rsgeneral-chavl,
      prodhier TYPE /bi0/oiprod_hier,
      market TYPE /bic/oima_seg,
      segment TYPE /bic/oizsegment.
DATA: BEGIN OF S_DATA_PACK OCCURS 0.
        INCLUDE STRUCTURE /BIC/CS8ZSDREV.
DATA: END OF S_DATA_PACK.
S_DATA_PACK[] = DATA_PACKAGE[].
REFRESH DATA_PACKAGE.
LOOP AT S_DATA_PACK.
    move-corresponding s_data_pack to DATA_PACKAGE.
    if DATA_PACKAGE-loc_currcy = 'EUR'.
      DATA_PACKAGE-netval_inv = DATA_PACKAGE-/bic/zsdvalgrc.
      DATA_PACKAGE-CURRENCY = 'USD'.
      APPEND DATA_PACKAGE.
      DATA_PACKAGE-netval_inv = DATA_PACKAGE-/bic/zsdvalloc.
      DATA_PACKAGE-CURRENCY = 'EUR'.
      APPEND DATA_PACKAGE.
    else.
      DATA_PACKAGE-netval_inv = DATA_PACKAGE-/bic/zsdvalgrc.
      DATA_PACKAGE-CURRENCY = 'USD'.
      APPEND DATA_PACKAGE.
    endif.
ENDLOOP.
This is to load Quantity field
RESULT = COMM_STRUCTURE-BILL_QTY.
This is to load Value field
RESULT = COMM_STRUCTURE-NETVAL_INV.
UNIT = COMM_STRUCTURE-currency.

Aggregation of data from one cube to another

Hello,
   I would like to copy the data of one cube to another cube, at an aggregated level like we do in BW.
   For instance, cube A has cost center, while cube B has to be the totals of all the cost centers from cube A. And hence, cube B will not have a field cost center at all.
   Could someone help me on this topic please.
Thanks and Best Regards,
Rajkumar A

Hi dear,
it's enough to do not put in your copy cube the cost center (the OLAP processor when you execute a query will do the rest)!
Otherwise, if you want to have all the records PHYSICALLY AGGREGATED, you have to go with an ODS as destination (and here you can aggregate as you prefer on the basis of your key part !)...
Or you can aggregate all the records in a single data package with a SUM operation into an internal table in your start routine (without the cost center, clearly !)...
Hope it helps!
Bye,
ROberto

How to copy documents for InfoProvider data from one cube to another cube

Hello Everyone,
We are using standard document feature to store document/comment about the data shown in the report/planning query. Relevant characteristics have the property 'characteristics is document attrib' turned on/selected for this purpose.
Looks like the documents created gets tagged to a particular InfoProvider along with characteristic value assignment.
Is there a way to move or copy documents from one InfoProvider to another InfoProvider.
As per the design requirement, we need to move data from a real time InfoProvider (transaction cube) to a basic reporting cube. The data in the first/source cube stays for a period of approx 3 months before moved to other cube. We want the documents associated with InfoProvider data also to be moved, so that users can continue to see the document/comments what they had created earlier.
I looked at the Documents tab in DataWarehouse workbench. No options seem to be available to copy or move documents.
Any help will be highly appreciated and points will be rewarded accordingly!
Best regards,
Sanjeeb

Hi
Have you got any answer to this? I would also be interested in a copy function but more from one query ID to another.
Kind regards,
Daniel Müller

How to copy query from one cube to another ? OR atlest a KF strecture?

Hello edperts,
just wanted some tips on coping a query or KF strecture from one cube to other . i am trying to use TCODE RSZC, but bcoz some of the chars. are not present in the target cube i a m not able to copy it.
But, looks like both the cube has save KFs, so i thought atlest let me copy KFS , so i just have to pull manually chars. but thats also not working..
Is there any back door way to do it ? please help me, it might save lots of time.
Appreciated.

Hi,
Check the below article, it might help you out.
[http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/204111a9-0fca-2d10-219c-be20e686cdb5?QuickLink=index&overridelayout=true]
Regards,
Durgesh.

Copy Query from one cube to another

Hi ,
Where can i do copy query from one to another cube
Thanks
Gururaj

Hi,
For copying queries from one cube to the another use Tcode :RSZC.
If you have RKF and CKF in the queries,
then only those RKF's and CKF's which are used in the query will be copied(Only those which you use in the structure).
One more important all the keyfigures will be copied with Technical name as _1 at the end.
i.e: if you have a KF called AVERAGE with Techname as <b>OSD_AVG</b> then this will be copied as <b>OSD_AVG_1</b>.Meaning you cannot define your own Tech names.
Thanks,
Uma Srinivasa Rao.

Loading of AWR Information from one DB to another

I have tried to archive AWR from one database to another before retention period kicks in. The awrextract and awrload - all work fine. I am also able to generate reports by providing explicit DB ID and instance number.
Both my source and target DB are in 11.2 running in 64-bit AIX
But when I load the AWR it seems to cleanup existing snapshots from the target database before loading from the dump. Am I missing something here?
Thanks

I don't know what you have.
I don't know what you do.
I don't know what you see.
It is really, Really, REALLY difficult to fix a problem that can not be seen.
use COPY & PASTE so we can see what you do & how Oracle responds.

Copying a query from one cube to another cube

HI BW Gurus,
I am having a report due date for net payment analysis in Accounts receivables and i want to copy the same query into a different infocube accounts payable.
Is it posssible to copy a query from one infocube to another infocube.
Regards,
Syed

Hi,
Yes,it is possible to copy query from one infoprovider to another infoprovider with some conditions.Please have a look at the note 981104 which explains you how to Copy between InfoProviders and Copy within one InfoProvider.
Rgds
Manoj Kumar

Copying Outline from one cube to another cube

please, Can any one help me with the following issues
1) I am on planning 9.3v, can anybody tell me how to copy the outline from one application to another, what is the procedure involved?
2)How can i change alias tables in data forms.
Thanks.
Edited by: 813627 on Feb 24, 2011 7:50 AM

1) I am on planning 9.3v, can anybody tell me how to copy the outline from one application to another, what is the procedure involved?http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/html_hp_admin/ch09s01.html
2)How can i change alias tables in data forms.http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/html_hp_admin/ch11s03s07.html
Cheers...!!!

Getting error while scheduling load from one cube to another

Hi,
I have create one cube ,which has got loaded from two data sources and load into the cube went successful.I have created copy cube and schedule the load into copy cube from the base cube,where i am getting error message syaing that"New work Area started,terminated the system" and "Core_dump","Rolled-Out session terminated" all the above messages are getting and so many short dumps.I am getting all the above messages.
Even i have change data packet size from 20000 to 5000 and increares dialup process from 2 to 5.But still i am getting same kind of messages.
Please some one can help me out from this issue.

Hi,
In which version you are.
If you in 7.0 then have you checked in DTP.
Just logooff from your server, and again relog, and try to load once again.
Let us know status ....
Reg
Pra

Less number of Records while loading data from one cube to another

Hi,
We are in the process of doing major changes in the existing InfoCube.
Before making any changes, we had planned to make a copy of the cube with data.
For this we did the following steps :
1. Created the new cube from the original cube.
2. Generated Datasource on the Orignal cube.
3. Made a update rule on the new cube by selecting the Orinal cube.
4. Made a InfoPack on Infosouce which got created with 8<original cube>.
5. Uploaded the data into the new cube.
We have uploaded the data successfully from the original cube to the new cube.
However, New cube shows less number of records as compared to the original cube.
But the query is showing the same figures from both the cubes.
Can anyone please advise what could be the reason for this less number of records and how the figures are showing same when we run the query from both the cubes.
Please help.
Thanks
Ramesh Ganji

Hi Ramesh,
this is possible coz when u have loaded yr original cube, it may be loaded on daily/weekly basis. so in the cube there are many requests. Also if in the same request, if there are two records with same dimension keys ther are automatically added aggregating them.
if req 1 has following records
cust mat amt
1      1     100
1      1       50
it will add
1      1     150
and if the records are seperated by different req, then both will b added individually.
therefore when u r loading yr new cube from original cube, all records that has same dimension key gets aggregated coz they are loaded into single request. so it showing less no of records as added.
hope this helps.
Regards,
Purvang
Assigning Point is to say Thanks in SDN *

Loading a level 0 export from one cube to another w/ fewer dimensions

Similar Messages

Maybe you are looking for