Loading a Spanish language flat file

Hi  frnds
I am trying to load a flat file of spanish language to ODS, I am getting an error saying "CONVERSION_EXIT_CUNIT_INPUT"
Can anyone tried loading other languages, other than english.
Regards
Kumar
Edited by: BW Kumar on Oct 21, 2008 10:27 PM

Hi
Just check for all lower case character in you file, all characters should ne in upper case.
You may also choose to edit this single records in PSA and process further.
Regards
Sudeep

Similar Messages

  • How to load data from a  flat file which is there in the application server

    HI All,
              how to load data from a  flat file which is there in the application server..

    Hi,
    Firstly you will need to place the file(s) in the AL11 path. Then in your infopackage in "Extraction" tab you need to select "Application Server" option. Then you need to specify the path as well as the exact file you want to load by using the browsing button.
    If your file name keeps changing on a daily basis i.e. name_ddmmyyyy.csv, then in the Extraction tab you have the option to write an ABAP routine that generates the file name. Here you will need to append sy-datum to "name" and then append ".csv" to generate complete filename.
    Please let me know if this is helpful or if you need any more inputs.
    Thanks & Regards,
    Nishant Tatkar.

  • Error Loading Data into a flat file

    I am recieving the following error when loading data into a flat file from a flat file. SQL 2005 is my back end DB. If I cut the file iin half approx 500K rows my ODI interface works fine. Not sure what to look at.. I rebuit the interface which before was just dying giving no error and now I am getting this.
    Thanks
    java.lang.Exception
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
         at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
         at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
         at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
         at com.sunopsis.dwg.cmd.e.i(e.java)
         at com.sunopsis.dwg.cmd.g.y(g.java)
         at com.sunopsis.dwg.cmd.e.run(e.java)
         at java.lang.Thread.run(Unknown Source)

    Figured it out, found similar post that stated changing the HEAP size
    Increase the page size in odiparams.bat in the bin folder and restart Designer.
    For eg:
    set ODI_INIT_HEAP=128m
    set ODI_MAX_HEAP=1024m

  • How to load the data from flat file ( ex excel ) to Planning area directly

    Hi all ,
    How can i load thedata fro m flat file directly to Planning area .
    PLease help me in this.
    Regards,
    Chandu .

    download one key figure data from planning book ( interactive damand plan) and made some changes and need to upload the data back to same planning book
    But, may I know why you are thinking of downloading, changing and uploading for just changing the figures for a particular key figure. You can do it in the planning book itself.
    However, not all the key-figures can be changed. But, what type of key-figure  you are speaking here? Is it like 'Forecast' for which the value is based on other key-figures, or is like a key-figure where some manual adjustments are to be done--so that it can be manually edited? However,  in both the cases, the data can be changed in the planning book only. In first case, you can change the values of dependant key-figures and in the second case, you can change the key-figures directly.
    And please note that you can change the values of the key-figures only at the detailed level. So, after loading the data in the book, use drill-down option, maintain the data at the detailed level, change the figures, and automatically, this gets reflected at the higher level.
    In case you are unable to change the values, go to the 'Design' mode of the book, right-click your key-figure, under "Selected Rows", uncheck "Output Only" option. In case you are unable to see that option, then you are not authorised to change that. See if you can change the authorisations by going to the "Data View" tab in planning book configuration (/n/sapapo/sdp8b), and change the value of Status to 3.
    Hope your query is answered with different solutions offered by many of the sdn colleagues here.
    Regards,
    Guru Charan.

  • Step by Step details on how to load data from a flat file

    hi can anyone explain how to load data from a flat file. Pls giv me step by step details. thnx

    hi sonam.
    it is very easy to load data from flat file. whn compared with other extrations methods...
    here r the step to load transation data from a flat file.......
    step:1 create a Flat File.
    step:2 log on to sap bw (t.code : rsa1 or rsa13).
    and observe the flat file source system icon. i.e pc icon.
    step:3 create required info objects.
    3.1: create infoarea
         (infoObjects Under Modeling > infoObjects (root node)-> context menu -
    > create infoarea).
    3.2:  create char /keyfig infoObject Catalog.(select infoArea ---.context menu --->create infoObject catalog).
    3.3:   create char.. infoObj and keyFig infoObjects accourding to ur requirement and activate them.
    step:4 create infoSource for transaction data and create transfer structure and maintain communication structure...
        4.1: first create a application component.(select InfoSources Under modeling-->infosources<root node>>context menu-->create  applic...component)
       4.2: create infoSource  for transation data(select appl..comp--.context menu-->create infosource)
    >select O flexible update and give info source name..
    >continue..
    4.4: *IMp* ASSIGN DATASOURCE..
      (EXPAND APPLIC ..COMP..>EXPAND YOUR INFOSOURCE>CONTEXT MENU>ASSIGN DATASOURCE.)
    >* DATASOURCE *
    >O SOURCE SYSTEM: <BROWSE AND CHOOSE YOUR FLAT FILE SOURCE SYSTEM>.(EX:PC ICON).
    >CONTINUE.
    4.5: DEFINE DATASOURCE/TRANSFER STRUCTURE  FOR IN FOSOURCE..
    > SELECT TRANSFER STRUCTURE TAB.
    >FILL THE INFOOBJECT FILLED WITH THE NECESSARY  INFOOBJ IN THE ORDER OR SEQUENCE OF FLAT FILE STRUCTURE.
    4.6: ASSIGN TRANSFER RULES.
    ---> NOW SELECT TRANSFER RULES TAB. AND SELECT PROPOSE TRANSFER RULES SPINDLE LIKE ICON.
    (IF DATA TARGET IS ODS -
    INCLUDE 0RECORDMODE IN COMMUNICATION STRUCTURE.)
    --->ACTIVATE...
    STEP:5  CREATE DATATARGET.(INFOCUBE/ODS OBJECT).
    5.1: CREATE INFO CUBE.
    -->SELECT YOUR INFOAREA>CONTEXT MENU>CREATE INFOCUBE.
    5.2: CREATE INFOCUBE STRUCTURE.
    ---> FILL THE STRUCTURE PANE WILL REQUIRE INFOOBJECTS...(SELECT INFOSOURCE ICON>FIND UR INFOSOURCE >DOUBLE CLICK > SELECT "YES" FOR INFOOBJECT ASSIGNMENT ).
    >MAINTAIN ATLEAST  ON TIME CHAR.......(EX; 0CALDAY).
    5.3:DEFINE AND ASSIGN DIMENSIONS FOR YOUR CHARACTERISTICS..
    >ACTIVATE..
    STEP:6 CREATE UPDATE RULES FOR INFOCUDE USING INFOSOURCE .
    >SELECT UR INFOCUBE >CONTEXT MENU> CREATE UPDATE RULES.
    > DATASOURCE
    > O INFOSOURCE : _________(U R INFOSOURCE). AND PRESS ENTER KEY.......
    >ACTIVATE.....UR UPDATE RULES....
    >>>>SEE THE DATA FLOW <<<<<<<<----
    STEP:7  SCHEDULE / LOAD DATA..
    7.1 CREATE INFOPACKAGE.
    --->SELECT INFOSOURCE UNDER MODELING> EXPAND UR APPLIC.. COMP..> EXPAND UR INFOSOURCE..> SELECT UR DATASOURCE ASSIGN MENT ICON....>CONTEXT MENU> CREAE INFOPACKAGE..
    >GIVE INFOPACKAGE DISCREPTION............_________
    >SELECT YOUR DATA SOURCE.-------> AND PRESS CONTINUE .....
    >SELECT EXTERNAL DATA TAB...
    > SELECT *CLIENT WORKSTATION oR APPLI SERVER  >GIVE FILE NAME > FILE TYPE> DATA SAPARATER>
    >SELECT PROCESSING TAB
    > PSA AND THEN INTO DATATARGETS....
    >DATATARGET TAB.
    >O SELECT DATA TARGETS
    [ ] UPDATE DATATARGET CHECK BOX.....
    --->UPDATE TAB.
    O FULL UPDATE...
    >SCHEDULE TAB..
    >SELECT O START DATA LOAD IMMEDIATELY...
    AND SELECT  "START" BUTTON........
    >>>>>>>>>>
    STEP:8 MONITOR DATA
    > CHECK DATA IN PSA
    CHECK DATA IN DATA TARGETS.....
    >>>>>>>>>>> <<<<<<<<<----
    I HOPE THIS LL HELP YOU.....

  • Ssis issue - load recent added 5 flat files

    HI
    i have one query like i have 5 flat files in one folder today i loaded into sql server table,tomorrow again added 5 flat files in same folder.i want to load recent added 5 flat files,
    can any one give me answer?

    You need to have a loop and inside it have a step to check for file modified date for getting the recent files. Much better is if filename has timestamp part use that to determine the latest files
    see example here
    http://visakhm.blogspot.in/2012/05/package-to-implement-daily-processing.html
    Please Mark This As Answer if it solved your issue
    Please Vote This As Helpful if it helps to solve your issue
    Visakh
    My Wiki User Page
    My MSDN Page
    My Personal Blog
    My Facebook Page

  • Can i load transaction data thro flat files without loading masters?

    Hi all,
    is it possible to load history data using flat files in sales cube without having loaded any masters?
    thanks

    Hi
    You can load the transaction data without loading the master data. You have to check the option in update rules (update also if no master data exists).
    In reporting you will not be able to see the attribute and text data. Its always adivceable to load master data first and run apply hierarchy/attribute change and load the transaction data.
    AHP: Nice to see you after a long time
    REGards
    Rak

  • Data Load Error: When loading Hierarchy through a flat file

    Hi Bw experts,
    I am getting the error message:  Info object is not available: Message RSAR210, when trying to  load the Hierarchy through flat file upload with IDOC processing.The info object is active. I am getting this error message only for one hierarchy, other hierarchies for the same inof object are loaded successfully.Can some one help me in this?
    Thanks in Advance.
    Regards,
    Bala

    Hi Bala,
    Can you please share the solution asap..
    As we are also facing the same issue.
    Your quick response will be appreciated a lot
    Regards,
    Sai

  • Loading international Character using Flat File

    Hi All,
    We have a requirement in which we want to load Japanese and German Characters using a Flat file. How can we go about it.
    When I change the file into CSV then only only ???? all displayed in place of the internatioanl character.
    Any help or document which tell that how we can load the internatioanl Characters would be appreciated and awarded in SDN.
    Regards,
    Samved

    Dear Samved Sinho,
    when u are creating the data source for  Flat file select the language dependent ..and in  the Text   table u have to include the corresponding language in SAP terminology
    Regards
    venu

  • Loading data from two flat files into one table

    Hi All,
    I want to load few fields from one file and few fields from another file and load the data into one table in the database.
    For Ex: I have two flat files file1.csv and file2.csv and file1.csv containes 25 columns and file2.csv containes 12 columns, i want to load 20 columns from file1.csv and 7 columns from file2.csv into the table
    how to combine the columns from both the files and load them into one table at a time?
    Any help is appriciated
    Thanks
    R.G

    Use external tables.
    If using Oracle9 or higher connect both your csv with database as separate external tables and load the requited fields in new/requited table.

  • How to to load data from a flat file in selection screen in portal .

    Dear All,
    I have a question to share : In BEX analyzer i know how i can upload multiple data in selection screen through a flat file , for example if i have to load 200 materials at one go in the selection screen, i can do that in BEX Analyzer . But if i run the same report through portal i am not able to find the upload option through flat file ..... Am i missing some option here ?
    Thanks & Regards,
    Ashutosh Singh

    You will not be able to load through the portal directly. it is possible to load if you can create Visual composer model. that also you will not be able to upload in bulk.

  • Error in load master data from flat file to infocube "No SID found for val"

    Hi gurus
    while i m loding data from ffile to infocube. getting error message "No SID found for value 'HOT ' of characteristic 0UNIT" for material name field .
    in flat file one fileld having lower carrecter so i have defined formula for upper case in transfer rule.
    after scheduleing message is "data was requested". but in monitor-> detail-> request, extraction status is green and transfer , processing ststus are red.
    overall status is red.

    It appears your transfer structure and source file are not mapped correctly. Make sure your source file is in the correct format. TRy the "preview" function to make sure.
    Also, is the file and your log on language the same? For instance is the file from a GErman user but you are logged in in English? You will see errors like that when you use ST (Stuck = Pieces) instead of PC (Peices in English)
    To test a bad mapping, hard code the Unit to something to make sure...(to PC for instance).
    Also, the error message you are getting is because of transfer structure, please re-activate it. IF it persists, try to skip the PSA and go straight to the data target.
    Message was edited by: Steve Wilson
    Message was edited by: Steve Wilson

  • Deleting master data after loading transactional data using flat file

    Dear All,
    I have loaded transaction data  into an infocube using a flat file . While loading DTP i have checked the  option "load  transactional data with out master data exists" . So transactional data is loaded even if no master data is there in BW.
    While loading the flat file, I made a mistake for DIVISION Characteristic  where original master data value is '04000' , but i loaded the transactional data with value '4000' .Then i later realized after seeing the data from the infocube and deleted the request. then i reloaded data with value '04000'. Till now every thing is fine.
    But when I see the master data for DIVISION , i can see a new entry  with value '4000'.
    My question is how to delete the entry value '4000' from DIVISION. I tried deleting manually this entry from 'maintaining masterdata' , but it is not allowing me to do so .
    I have also checked if any transactional data exists for that value '4000' , as i said earlier I have deleted the transactional data with that values. even tried to delete the entries from the master data table, but i donot see a option to delete entries there.
    Please suggest me on this.
    Regards,
    Veera

    Hi,
    Goto RSA1 right click on the Info object and select Delete Master data. This will delete the master data unused existing in the table.
    If this master data is not used any where else just delete the master data completely with SID option.
    If even this doesnt work you can delete the complete table entire in SE14. But this will wipe out the entire table. Be sure if you wanna do this.
    Hope this helps
    Akhan.

  • Numbering nodes when loading hierarchy from a flat file.

    Hi All,
    I want to load a hierarchy from a flat file. When we number the nodes, do they have to be in a sequence or can I give them any number I want? I want to make the GL account number as the node number since it makes it easy to generate the node number that way. The way I see it, the important thing is the parent node number; so this approach should be fine. Please correct me if I am wrong.
    Thanks,
    Uday

    Hi Uday,
       You need to have a running sequence numbers for Node Id field in the flat file. The file structure is as
    NODEID  IOBJNM      NODENAME TLEVEL LINK PARENTID
    00000001 0GLACC     GL233344             00000001
    00000002 0GLACC     GL435556             00000001
    00000003 0GLACC     GL545666             00000001
    00000004 0costcenter cc433232            00000002
    00000005 0costcenter cc433233            00000002
    00000006 0costcenter CC555551            00000003
    The Parentid will calculated by the system automatically.
    when you prepare you file csv please ensure that you have 8 characters for the Node ID " 00000003" other wise you will get error.
    And if you want to add GL Account number to your hierarchy then you need to add GL A/c Number as external characteristics in hierarchy and add it to your flat file .
    Hope it helps.
    Cheers,
    Balaji

  • Loading transaction data from flat file to SNP order series objects

    Hi,
    I am an BW developer and i need to provide data to my SNP team.
    Can you please let me know more about <b>loading transaction data (sales order, purchase order, etc.,) from external systems into order based SNP objects/structure</b>. there is a 3rd party tool called webconnect that gets data from external systems and can give data in flat file or in database tables what ever required format we want.
    I know we can use BAPI's, but dont know how. can you please send any <b>sample ABAP program code that calls BAPI to read flat file and write to SNP order series objects</b>.
    Please let me know ASAP, how to get data from flat file into SNP order based objects, with options and I will be very grateful.
    thanks in advance
    Rahul

    Hi,
    Please go through the following links:
    https://forums.sdn.sap.com/click.jspa?searchID=6094493&messageID=4180456
    https://forums.sdn.sap.com/click.jspa?searchID=6094493&messageID=4040057
    https://forums.sdn.sap.com/click.jspa?searchID=6094493&messageID=3832922
    https://forums.sdn.sap.com/click.jspa?searchID=6094493&messageID=4067999
    Hope this helps...
    Regards,
    Habeeb
    Assign points if helpful..:)

Maybe you are looking for