Loading an into CS3 from Lightroom

I am running Lightroom on Windows Vista. If I make changes to an image in the develop module of Lightroom, and then right click on the image, go to Edit in CS3, and Edit a Copy with Lightroom adjustments, CS3 boots up but no image appears within CS3.
Any ideas??
Thanks

What happens when PS is open already? Does it not show then?
Sorry don't know how to fix, but if yours works as mine does sometimes, then this would help. (I am onna Mac, Btw)

Similar Messages

Loading an image into CS3 from Lightroom

Sorry to repeat this request but:
I am running Lightroom on a laptop with Windows Vista. If I make changes to an image in the develop module of Lightroom, and then right click on the image, go to Edit in CS3, and Edit a Copy with Lightroom adjustments, CS3 boots up but no image appears within CS3.
I did have both CS2 and CS3 on my hard drive. I removed CS2 with no benefit. I removed Lightroom, and re-installed a purchased version but still the same problem. Edit - Preferences - External Editing shows Edit in Photoshop CS3 and Additional External Editor Photoshop.exe. Trying this latter option to open the image in CS3 also fails.
Any ideas??
Thanks

Uninstall and reinstall PS CC 2014. This fixes things for most people with this problem and there are many.

Camera raw and Photoshop CS3 from Lightroom

(2.5) If I open a raw image from Windows Explorer or Bridge (which I don't use much), Camera Raw 4.6 opens. It doesn't open if I Edit In Photoshop CS3 from Lightroom, but says "This version of Lightroom may require the Photoshop Camera Raw plug-in version 5.5 for full compatibility. Camera Raw version 4.6 is the latest version available for Photoshop CS3".
There are two choices: Render using Lightroom and Open Anyway. If I say the former, it doesn't use the file name, but does something like -2.tif.
I'm not sure what these two choices actually do.
Secondly, if things were working properly, would Lightroom actually open the Camera Raw window? If so, is there anything I can do short of upgrading PS to CS4?
Thanks.

Just a little history of the profiles being displayed for your camera model. The camera calibration tab only displays the profiles that are specific to your camera and model. The earler profiles were named after the version of ACR that was in use when they were created.
So.
ACR 4.2 the first profile created for your camera model when support was introduced.
ACR 4.4, Adobe created/ updated new profiles for most of the supported camera models with this release of ACR.
Adobe Standard Beta, updated profile when the Beta of ACR 5.0 and LR 2.0 were introduced.
Adobe Standard, Updated profile for the final release of ACR 5.0 and LR 2.0. This then is the latest profile created for your camera model. I think it should be the closest to your camera standard.
Adobe did not create any other camera matching profiles Vivid, Neutral etc other than for the more popular Nikon and Canon models. I have an Olympus so I am in the same boat.

When loading songs into iTunes, from my external hard drive. It seems to be copying the music onto my MacBook Air.

When loading songs into iTunes, from my external hard drive. It seems to be copying the music onto my MacBook Air.
How do i have iTunes only read the songs from my hard drive, rather then copying them?

You may find these Links of Interest...
Moving iTunes Media Folder
http://support.apple.com/kb/HT1449
http://macmost.com/moving-your-itunes-media-to-an-external-drive.html

HT2729 Have loaded music into library from a CD,How do I get it on my IPod Touch

Have loaded music into library from CD,how do I get it from there to my IPod touch,I am new at this and am old

Sync it as you would anything else.
iPod touch User Guide (For iOS 6.1 Software)

How can i load file into database from client-side to server-side

i want to upload file from client-side to server-side, i use the following code to load blob into database.
if the file is in the server-side, it can work, but if it in the client-side, it said that the system cannot find the file. i think it only will search the file is in the server-side or not, it will not search the client-side.
how can i solve it without upload the file to the server first, then load it into database??
try
ResultSet rset = null;
PreparedStatement pstmt =
conn.prepareStatement ("insert into docs values (? , EMPTY_BLOB())");
pstmt.setInt (1, docId);
pstmt.execute ();
// Open the destination blob:
pstmt.setInt (1, docId);
rset = pstmt.executeQuery (
"SELECT content FROM docs WHERE id = ? FOR UPDATE");
BLOB dest_lob = null;
if (rset.next()) {
dest_lob = ((OracleResultSet)rset).getBLOB (1);
// Declare a file handler for the input file
File binaryFile = new File (fileName);
FileInputStream istream = new FileInputStream (binaryFile);
// Create an OutputStram object to write the BLOB as a stream
OutputStream ostream = dest_lob.getBinaryOutputStream();
// Create a tempory buffer
byte[] buffer = new byte[1024];
int length = 0;
// Use the read() method to read the file to the byte
// array buffer, then use the write() method to write it to
// the BLOB.
while ((length = istream.read(buffer)) != -1)
ostream.write(buffer, 0, length);
pstmt.close();
// Close all streams and file handles:
istream.close();
ostream.flush();
ostream.close();
//dest_lob.close();
// Commit the transaction:
conn.commit();
conn.close();
} catch (SQLException e) {

Hi,
Without some more details of the configuration, its difficult to know
what's happening here. For example, what do you mean by client side
and server side, and where are you running the upload Java application?
If you always run the application on the database server system, but can't
open the file on a different machine, then it sounds like a file protection
problem that isn't really connected with the database at all. That is to
say, if the new FileInputStream (binaryFile) statement fails, then its not
really a database problem, but a file protection issue. On the other hand,
I can't explain what's happening if you run the program on the same machine
as the document file (client machine), but you can't write the data to the
server, assuming the JDBC connection string is set correctly to connect to
the appropriate database server.
If you can provide some more information, we'll try to help.
Simon
null

Cannot open CS3 from Lightroom

Lightroom will not now open the image into CS3.
Worked OK before.
Any idea's, please.

>"Hi Pierre, when you said "upgrade", you mean CS3 full install or using using the upgrade CDs? If using the upgrade CDs, (unless you don't need existing CS2 to be on the drive) wouldn't you need the CS2 to be installed first before using the upgrade CDs?
Also, when you said "unregistered", does that mean running the Disk Repair utility to repair the permissions?"
I was loose with my terminlolgy - I bought a new version of CS3. Before installing it, I deactivated CS2 (or whatever the term is - this unregistered the product at Adobe). Then I used AppZapper (Mac) to delete CS2 and all it's associated files, then installed CS3.
Why didn't I buy the upgrade? I'm an educator and get the educational version - $285 is much better than $999 for PSCS3 extended!
- Pierre

Opening into ACR from Lightroom

I have downloaded the recent ACR 7 plguin for CS6. From Bridge I can open my faw files and the automatically open into ACR before photoshop. But can I do this from Lightroom? I know I can right click, get a drop down menu, and choose edit in photoshop, but at this point I would assume it would open up the ACR editor, but doesn't happen. what am I missing?

As far as raw conversion is concerned, you accomplish nothing by going from Lightroom to ACR because the controls are the same. Photoshop uses ACR to interpret the Lightroom adjustments. But, theoretically, that is all ACR is needed for in the transition from Lightroom to Photoshop. However, there is an option in Lightroom that allows you to open an image as a smart object. Or, once in Photoshop, you can convert an image to a smart object. Then, from Photoshop, you can open the image in ACR to make further adjustments if necessary.

Error in loading data into PSA from source system.

Hi Experts !!!
Good morning .
I am trying to load data from SRM source system into BI system.When I execute infopackage,the data is not loaded into PSA and status of the process immediately becomes yellow.After sometime it gets timed out and converts to RED.When I checked the error documentation I found that the iDOCS response was not received from the source system.Detailed error is as below.
System Response
There are idocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
Further Analysis
Check the TRFC log
you can access this log using the wizard OR menu path "Environment > Transact. RFC> In the source system
However,I was not able to navigate to this path.I think if I can navigate to this path,I can manually push IDOCS from source system to BI system.
Regards,
Mandar.

Hi,
Check the DataSource in RSA3, if it is working fine and able to see the data in RSA3, there is no problem in DS level, then check the Mappings and any routines in BW for that DS, if this is also fine then check the below options.
See Dumps in ST22, SM21 also.
Check RFC Connection between ECC and BW systems, i.e. RSA1-->Source System->Right Click on Source system and Check.
You must have the following profiles to BWREMOTE or ALEREMOTE users.So add it. Bcoz either of these two users will use in background to get extract the data from ECC, so add these profiels in BW.
S_BI-WHM_RFC, S_BI-WHM_SPC, S_BI-WX_RFC
And also check the following things.
1.Connections from BW to ECC and ECC to BW in SM59
2.Check Port,Partner Profiles,and Message Types in WE20 in ECC & BW.
3.Check Dumps in ST22, and SM21.
4.If Idocs are stuck i.e see the OLTP Idoc numbers in RSMO Screen in (BW) detials tab see in bottom, you can see OLTP Idoc number and take the Idoc numbers and then goto to ECC see the status in WE05 or WE02, if error then check the log else goto to BD87 in ECC and give the Idoc numbers and execute manually and see in RSMO and refresh.
5.Check the LUWs struck in SM58,User Name = * (star) and run it and see Strucked LUWs and select our LUW and execute manually and see in RSMO in BW.
See in SDN
Re: Loading error in the production system
IDOC getting struck at TRFC (SM58)
1.Reorg of table (ARFCSSTATE )
2.Incraesing the resources in the system (no of processes and memory ) , as this issue happens owing to this.
Source system tries to send TRFC to target and if there are no WP's available it will come to Transaction Recorded state, and form here it will not try to send this TRFC.So you have to execute this manually.
Also we can increase the timeout parameter so that it can try few more times to send before actually it comes to recorded state.
Regards,
Suman

Error while loading data into PSA from data source

Hi Experts ,
I am loading purchase order history data from standerd datasource 0SRM_TD_CF into PSA using infopackage.However,whenevr I run infopackage,the call monitor shows the status as yellow.I monitored the process for half an hour but it never ended.I have verified following things from my side.
1.Checked whether datasource is properly replicated into BI system.
2.Checked if source system contains data.
3.Since i am loading transaction data,I have kept update as "initialize delta process"
Please let me know whether I am missing anything.
Regards,
Mandar.

Hi mandarha,
Do the following steps
1)Check the job log in source systems.
2)Check the Data Source in RSA3(Extracter checker) on Source systems side.give DS name press enter then execute,If there is no issue with DS,it will give pop-up with records.If it has any errors first rectify it and then load it again.
3)In details tab of IP,check whether extraction completed or not.
4)Are you running the IP with option "Intialse with data trasfer" or "Without data transfer"
If you running with data transfer and without data selection,usually it will take time based on the volume of historical data.(to find how many records it picks do the 2 step)
Hope this helps
Regards,
Venkatesh.

Loading Files into CS3 Raw Presets

I went from window's xp to vista. When I would open a RAW file I would be able to click the presets tab to the right of the picture where I had loaded Camera Raw Effects. Now that I have switched to vista, I am not able to find how to do that again. Can anyone help me in loading my effects into the presets tab. I keep trying to load settings however it is only loading the one setting. Anyone else having this issue!!

I tried to increase the ram on a new Mac Pro tower. That didn't work and this wasn't an issue on my G5 where I opened thousands of files in ACR via CS2 at one time and saved them as JPGS to an external drive.
I haven't tried the image processor or Dr. Brown's. Although I'm familiar with them.
What I would like to do is to continue using the program as I have used it in the past. Opening in camera raw and adjusting them and then saving them. Very simple. Very clean. No additional steps. No confusion for me or my assistants.
But it appears to me that I'm going to have to take two step backwards to take one step forwards here.
Or am I still missing something?

Error loading data into Essbase from the SQL Server

Hello experts!
I've got another urgent and confusing issue. I am loading data from an SQL Server view into Essbase (which is reversed with multiple data columns) using ODI 11.1.1.5 and I get the following error at +"3-Loading -SrcSet0-Load Data"+ step:
ODI-1227: Task SrcSet0 (Loading) fails on the source MICROSOFT_SQL_SERVER connection.
+Caused By: java.sql.SQLException: [FMWGEN][SQLServer JDBC Driver][SQLServer]Incorrect syntax near the keyword 'View'+
where "View" is the name of the dimension (non-data) column in the SQL view.
Please help me with any hints! Thank you so much!

John, thank you so much!
Your answer is exactly correct!
"View" is an object name in SQL Server so this word cannot be used as a column name in SQL Server tables. Once the name of the colunm changed from "View" to another, the interface runs without errors!

Load hyperlink into image from xml

Hello everyone,
I am completely new to Flex and got stuck with this problem:
I would like to put a hyperlink into an image, both are loaded from external xml
xml looks like this:
      <project>
      <id>0</id>
      <titel>project google</titel>
      <image>image1.gif</image>
      <url>www.google.com</url>
      <date>06/01/2008</date>
      <description>Some description</description>
    </project>
So the url needs to be put into image 1
Hope someone can help me out...
Thanks in advance!

how is the XML loaded in? via PHP? or a static XML file.
if it's a static XML file, you'll have to load it in, feed it to an XML List collection and then simply feed the correct node to the image source.
they do this kind of thing here:
http://blog.flexexamples.com/2008/03/08/creating-a-simple-image-gallery-with-the-flex-tile list-control/
if it's loaded in via PHP, you'll need to handle the HTTPService request, and feed the image source an item off the result event.

Save and load game into and from binary file

hello!
I'm new to java and i'm doing a game at school.
i�m doing the same game and i�m doing a "save" and "Load" game. i'm doing this to save the game:
public void jMenuJogoSalvar_actionPerformed(ActionEvent e) {
System.out.println("SAlvar o Jogo actual");
FileOutputStream out = null;
ObjectOutputStream s = null;
int valorRet = jFileChooserSalvar.showSaveDialog(this);
if (valorRet == jFileChooserSalvar.APPROVE_OPTION) {
try {
out = new FileOutputStream(jFileChooserSalvar.getSelectedFile().getAbsoluteFile());
s = new ObjectOutputStream(out);
s.writeObject(mesa);
s.flush();
catch (FileNotFoundException fNFExc) {
System.out.println("FileNotFound");
catch (IOException ioExc) {
ioExc.printStackTrace();
finally {
try {
if (s != null) {
s.close();
if (out != null) {
out.close();
catch (IOException ex) {
and i'm getting this error:
java.io.NotSerializableException: com.sun.java.swing.plaf.windows.WindowsFileChooserUI
i have already implemented the method Serializable into the classes that i'm trying to write and the classes they use but i still have this.
Tell me what to do .
thanks for the time.

Does the Object mesa have a com.sun.java.swing.plaf.windows.WindowsFileChooserUI
object in side it? or does any of the object that are in side it have a com.sun.java.swing.plaf.windows.WindowsFileChooserUI
object?
If you post code please use the code button

Error Loading data into ODS from ODS

I have a loading problem wen trying to load data fro an ODS to another which has a start routine in the Update rules.
the errors are as follows.
ERROE 7 when sending IDOC
&INCLUDE INCL_INSTALLATION ERROR
&INCLUDE INCL_INSTALLATION ERROR 7
&INCLUDE INCL_INSTALLATION ERROR 2
&INCLUDE INCL_INSTALLATION ERROR 5
Connection Closed (no data) 4
Connection Closed (no data)
Connection Closed (no data) 6
Error in Source System.
But there are lot of data in the loading ODS
Please help me

Hi,
Please check the following OSS notes.
Note 610938 - Error 7 during transfer of an IDoc into BW
Note 610246 - Error 7 when sending an IDoc
Regards.

Loading an into CS3 from Lightroom

Similar Messages

Maybe you are looking for