Loading Attribute Dimension - Hyperion Planning

Hello Everyone,
I appreciated a lot informations that I found here. I red the http://john-goodwin.blogspot.com/2008/11/odi-series-loading-essbase-metadata.html
about loading attribute dimension on Essbase, but when I try to execute the same steps using Hyperion Planning Adapter in ODI, I cannot see the option inside the model to reverse also all dimension attribute, hence I cannot load members on my dimension attribute. Do you know how can I develop the attribute dimension load on Hyperion Planning?
Regards,
Wallace Galvão
Brazil

Hi,
You first need to create the attribute dimension in planning, ODI does not create dimensions.
Once you have created your attribute dimension you can reverse the planning application again and the attribute dimension should be created as a DataStore
Cheers
John
http://john-goodwin.blogspot.com/

Similar Messages

How to design Flat file for loading attribute dimension in a planning application

Dear Gurus,
I have a requirement to extract attribute dimensions from an essbase application and load it to another planning application. I have a dimension called Program and two attribute dimensions Sales Manager, Accounts manager associated with Program dimension in Essbase application. I will Extract these dimensions using Essbase outline extractor. After Extracting the attribute dimensions I have to load these dimensions to planning applications using outline load utility. Kindly guide me how to design the flat file for loading attribute dimensions in planning application.
Thanks and Regards
SC

You could dig through the docs and try to figure out the file format manually, or you could do this the easy way. Simply use the Outline Load Utility to export your attribute dimension from Planning. The export file format is the same as the import file format. You might have to manually add a couple of test members to your attribute dimension so that your export file has some content. Then simply update the file you exported, and import it.
(I am assuming you have already manually created the Attribute dimension in Planning, and that you simply need to add members to it.)
Hope this helps,
- Jake

Unable to load data to Hyperion planning application using odi

Hi All,
When I try to load data into planning using odi, the odi process completes successfully with the following status in the operator ReportStatistics as shown below but the data doesn't seem to appear in the planning data form or essbase
can anyone please help
org.apache.bsf.BSFException: exception from Jython:
Traceback (most recent call last):
File "<string>", line 2, in <module>
Planning Writer Load Summary:
 Number of rows successfully processed: 20
 Number of rows rejected: 0
source is oracle database
target account dimension
LKM SQL TO SQL
IKM SQL TO HYPERION PLANNING is used
In Target the following columns were mapped
Account(load dimension)
Data load cube name
driverdimensionmetadata
Point of view
LOG FILE
2012-08-27 09:46:43,214 INFO [SimpleAsyncTaskExecutor-3]: Oracle Data Integrator Adapter for Hyperion Planning
2012-08-27 09:46:43,214 INFO [SimpleAsyncTaskExecutor-3]: Connecting to planning application [OPAPP] on [mcg-b055]:[11333] using username [admin].
2012-08-27 09:46:43,277 INFO [SimpleAsyncTaskExecutor-3]: Successfully connected to the planning application.
2012-08-27 09:46:43,277 INFO [SimpleAsyncTaskExecutor-3]: The load options for the planning load are
 Dimension Name: Account Sort Parent Child : false
 Load Order By Input : false
 Refresh Database : false
2012-08-27 09:46:43,339 INFO [SimpleAsyncTaskExecutor-3]: Begining the load process.
2012-08-27 09:46:43,355 DEBUG [SimpleAsyncTaskExecutor-3]: Number of columns in the source result set does not match the number of planning target columns.
2012-08-27 09:46:43,371 INFO [SimpleAsyncTaskExecutor-3]: Load type is [Load dimension member].
2012-08-27 09:46:43,996 INFO [SimpleAsyncTaskExecutor-3]: Load process completed.

Do any members exist in the account dimension before the load? if not can you try adding one member manually then trying the load again.
Cheers
John
http://john-goodwin.blogspot.com/

Unable to load metada into Hyperion Planning using ODI

HI All,
I am using ODI 11g and trying to load the metadata for Hyperion Planning application 11.1.2.1. But I couldnt load all the Product members in Product Dimension.
Could able to load few members but was able to run the interface successfully but thrown error while loading few members(Most of the members are shared members, verified that base members existed). Please find the below error log.
2011-11-17 06:18:06,534 INFO [SimpleAsyncTaskExecutor-2]: Oracle Data Integrator Adapter for Hyperion Planning
2011-11-17 06:18:06,550 INFO [SimpleAsyncTaskExecutor-2]: Connecting to planning application [xxxx] on [xxxx]:[11333] using username [xxxx].
2011-11-17 06:18:06,675 INFO [SimpleAsyncTaskExecutor-2]: Successfully connected to the planning application.
2011-11-17 06:18:06,706 INFO [SimpleAsyncTaskExecutor-2]: The load options for the planning load are
Dimension Name: Product Sort Parent Child : false
Load Order By Input : false
Refresh Database : false
2011-11-17 06:18:06,768 INFO [SimpleAsyncTaskExecutor-2]: Begining the load process.
2011-11-17 06:18:06,878 DEBUG [SimpleAsyncTaskExecutor-2]: Number of columns in the source result set does not match the number of planning target columns.
2011-11-17 06:18:07,440 INFO [SimpleAsyncTaskExecutor-2]: Load type is [Load dimension member].
2011-11-17 06:18:07,487 ERROR [SimpleAsyncTaskExecutor-2]: Record [[D090, Mobile Mice Cordless_Prod type, D090-Flores DJ, null, Shared, null, null, null, null, null, null, null, +, null]] was rejected by the Planning Server.
2011-11-17 06:18:07,503 ERROR [SimpleAsyncTaskExecutor-2]: Record [[D091, Mobile Mice Cordless_Prod type, D091-Fiji BT, null, Shared, null, null, null, null, null, null, null, +, null]] was rejected by the Planning Server.
2011-11-17 06:18:07,518 ERROR [SimpleAsyncTaskExecutor-2]: Record [[D093, Mobile Mice Cordless_Prod type, D093-New York, null, Shared, null, null, null, null, null, null, null, +, null]] was rejected by the Planning Server.
2011-11-17 06:18:07,550 ERROR [SimpleAsyncTaskExecutor-2]: Record [[D060, Mobile Mice Cordless_Prod type, D060-Corbusier Vista, null, Shared, null, null, null, null, null, null, null, +, null]] was rejected by the Planning Server.
2011-11-17 06:18:07,565 ERROR [SimpleAsyncTaskExecutor-2]: Record [[D064, Mobile Mice Cordless_Prod type, D064-Sardinia Laser, null, Shared, null, null, null, null, null, null, null, +, null]] was rejected by the Planning Server.
2011-11-17 06:18:07,581 ERROR [SimpleAsyncTaskExecutor-2]: Record [[D065, Mobile Mice Cordless_Prod type, D065-Ibiza Optical, null, Shared, null, null, null, null, null, null, null, +, null]] was rejected by the Planning Server.
Regards,
SP

Can you check the error log file as you have posted the log file, it should give more information to why the records were rejected.
Cheers
John
http://john-goodwin.blogspot.com/

Error while loading period dimension in planning through DIM

Hi,
I am trying to load the metadata extracted from DRM into Period dimension in Hyperion Planning through Informatica using DIM. But I am getting the following error:
Record [[YearTotal, Period, Total Year, Dynamic Calc, 0, null, null, null, null, Unspecified, null, null, null, null, ~, ~, ~]] was rejected by the Planning Server.
Error occurred during load process. Error message is: Cannot load dimension member, error message is: java.lang.RuntimeException: Year operations not handled through this entry point.
Record [[1stHalf, YearTotal, null, Dynamic Calc, 0, null, null, null, null, Unspecified, null, null, null, null, +, +, +]] was rejected by the Planning Server.
Error occurred during load process. Error message is: Cannot load dimension member, error message is: java.lang.RuntimeException: Invalid First Child Id
Appreciate your help.
Thanks.

The .otn file is created when essbase is restructuring and once completed renamed to otl, if it does not complete it can leave the .otn file.
You should be able to delete the otn (maybe stop the application first) and open the outline.
I would also check the logs generated from ODI and also the essbase app logs to troubleshoot the issue.
Cheers
John
http://john-goodwin.blogspot.com/

Reporting Attribute dimension on Planning Database in HFR

Can you report attribute dimension values in Hyperion Financial Reports when connection to the Planning database connection? I am not seeing Planning Details as an option in HFR as only Planning appears. Is there something that I'm missing? I would like to report Smart List alphanumeric values on HFR but also be able to pull in the attribute dims, yet that doesn't seem possible.

Hi Alex
That sounds like a bug, I have used attribute dimensions in reporting lots of times in earlier versions and I'm sure that some of those used planning rather than essbase connections. I've not read the documentation around the subject so can't be sure but it sounds pretty fundamental so I'd be surprised if not a bug.
Worth doing a bit of digging on Oracle support or in the readme files or even raising an SR if you have that option.
Regards
Stuart

How to hide the Attribute dimension from Planning webform

I am in Planning 9.3.1
We are using members in row section of webform w.r.t Attribut dimension
so when we are viewing the webform- it is displaying member name followed by Attribute dimension name .
any way to hide that Attribute dimension member from the webform.
KK

In the Dimension Properties for that dimension, select "Enable custom attribute display" but dont pull the attribute from Available Dimensions to Selected Dimensions. I've given the name of the property from 11.1.1.3 version, so not sure if its the same in 9.3.1 but it'll be somewhat similar.
Cheers

Loading hierarchical dimension in planning

Hi,
I'm trying to load an Account dimension in Planning..
It is a flat table with the following levels. The table basically created P&l and balance sheet hierarchies..
L1 L2 L3 L4 ACCOUNTID ACCOUNTDESC
Do I need to convert this table in parent child format before loading it using ODI?
If not how do I load it in a flat format using ODI..
Any same query for converting it in parent child format will be helpful..
Any responses will be much appreciated!!

A simple way would be to have multiple loads L1, L2 then L2, L3..... or load the file into a table and create a view on it.
Cheers
John
http://john-goodwin.blogspot.com/

Problem loading data to Hyperion Planning app. from Oracle EBS using ERPi

I'm using ERPi to load data to Planning application from EBS.
I have configured Source and Target, created import formats, location, data load rules etc.
When I'm running data load rule it is showing that data is imported and exported sucessfully. I can see data in the right format in data load workbench. ODI shows process completed sucessfully. But still there is no data loaded in Planning.
Even AIF_HS_BALANCES staging view in ERPi repository shows correct data.
Can some one tell me what could be the problem.
Or where I can see logs for the data load step for Planning.
ODI operater logs are not very clear to me. Same for log tables in ODI work repository.

Hi Tony
Apologies for the delay (my email spammed the notification that you had replied, helpful!!). When you say that you have done it but discourage accessing the tables directly how did you achieve this? Were you just careful which data intersections your selected from the tables (e.g. always base level data so it is stored not calculated)?
I have used the HFM relational tables a couple of times to make use of the metadata that they contain but not tried to get data before.
Regards
Stuart

Hyperion Planning and Varying attribute

Hi
Can some help me in having varying attribute in Hyperion Planning application.
Does Hyperion planning support Varying attribute concept?
Regards
Shyamkant

HI,
Varying attributes is applicable only to essbase so far , this is also with the advent of the new versions.
Sandeep Reddy Enti
HCC
http://hyperionconsultancy.com/

Can't we load all dimensions using HAL

Hii am using Hyperion Application Link to load members into mydimesions.i was successfull in loading accounts. but when i tried toloading scenerios, i was not able to do that as my planning adapterdon't have that dimension in the drop down. i tried refresh , butnothing happened.can't we load all dimensions into planning using HAL?thanks in advance. -Balu 

Hello, Four dimensions which are Entity, Accounts, scenario &Versions are self generated in Planning. However we cannot use HAL for Scenarios and Versions. Hyperguy

Create & Load Attribute without Outline Load Utility? Add Many Attributes?

1. Is it possible to create and load attribute dimensions without using Outline Load Utility? How?
2. What is the fastest way to create and load attribute dimensions massively? (ex. 5000 attributes)
p.s. I don't understand when John Goodwin says "reversing Planning application", could you please elaborate on that?

N wrote:
But if people want to keep their jobs in this economy or advance in their career in the world of IT, a better and faster way of learning and communicating is needed.So forums, blogs, documentation, training, LinkedIn, twitter, Facebook is not enough, basically if everything is handed to you on a plate then where is the benefit as you will not actually be learning.
If you think something is missing then feel free to start up a social network instead of complaining that it doesn't exist.
Also you want to start marking your posts helpful or correct instead of just expecting from the forum.
Cheers
John
http://john-goodwin.blogspot.com/

Error during Export process to Hyperion Planning:

Hello All,
I am trying to load data to Hyperion Planning from EBS GL. I have completed the setup including setting up source, target, mappings, rules, etc. The import and validate process from EBS is working fine but export to Hyperion Planning fails right away. In my limited experience with FDMEE, I have not seen this error before and your help is greatly appreciated.
Here is an excerpt of error from FDMEE process details which is the same error shown in ODI. Everything before this process seems to be working. It seems like it is complaining about a host name but not sure which host name should I be looking at.
Environment: EBS12, FDMEE 11.1.2.3.520, Everything is on 64bit Linux
Error:
2015-01-14 08:53:25,578 DEBUG [AIF]: AIFUtil.callOdiServlet - START
2015-01-14 08:53:25,690 FATAL [AIF]: Error in CommData.loadData
Traceback (most recent call last):
File "<string>", line 4853, in loadData
File "<string>", line 1122, in callOdiServlet
File "__pyclasspath__/urllib2.py", line 124, in urlopen
File "__pyclasspath__/urllib2.py", line 387, in open
File "__pyclasspath__/urllib2.py", line 497, in http_response
File "__pyclasspath__/urllib2.py", line 425, in error
File "__pyclasspath__/urllib2.py", line 360, in _call_chain
File "__pyclasspath__/urllib2.py", line 506, in http_error_default
HTTPError: HTTP Error 504: Unknown Host
2015-01-14 08:53:25,691 DEBUG [AIF]: CommData.updateWorkflow - START
2015-01-14 08:53:25,691 DEBUG [AIF]:
 UPDATE TLOGPROCESS
 SET PROCESSENDTIME = CURRENT_TIMESTAMP
 ,PROCESSSTATUS = 32
 ,PROCESSENTLOAD = 0
 ,PROCESSENTLOADNOTE = 'Load Error'
 WHERE PARTITIONKEY = 3 AND CATKEY = 1 AND PERIODKEY = '2011-04-30' AND RULE_ID = 24
2015-01-14 08:53:25,692 DEBUG [AIF]: CommData.updateWorkflow - END
2015-01-14 08:53:25,692 DEBUG [AIF]: Comm.executeScript - START
2015-01-14 08:53:25,692 DEBUG [AIF]: The following script does not exist: /u01/fdmee_app/ALPLAN/data/scripts/event/AftLoad.py
2015-01-14 08:53:25,692 DEBUG [AIF]: Comm.executeVBScript - START
2015-01-14 08:53:25,693 DEBUG [AIF]: The following script does not exist: \u01\fdmee_app\ALPLAN\data\scripts\event\AftLoad.vbs
2015-01-14 08:53:25,693 DEBUG [AIF]: Comm.executeVBScript - END
2015-01-14 08:53:25,693 DEBUG [AIF]: Comm.executeScript - END
2015-01-14 08:53:25,746 DEBUG [AIF]: Comm.finalizeProcess - START
2015-01-14 08:53:25,747 DEBUG [AIF]: CommData.updateRuleStatus - START
2015-01-14 08:53:25,747 DEBUG [AIF]:
 UPDATE AIF_BALANCE_RULES
 SET STATUS = CASE 'FAILED'
 WHEN 'SUCCESS' THEN
 CASE (
 SELECT COUNT(*)
 FROM AIF_PROCESS_DETAILS pd
 WHERE pd.PROCESS_ID = 173
 AND pd.STATUS IN ('FAILED','WARNING')
 WHEN 0 THEN 'SUCCESS'
 ELSE (
 SELECT MIN(pd.STATUS)
 FROM AIF_PROCESS_DETAILS pd
 WHERE pd.PROCESS_ID = 173
 AND pd.STATUS IN ('FAILED','WARNING')
 END
 ELSE 'FAILED'
 END
 WHERE RULE_ID = 24
2015-01-14 08:53:25,748 DEBUG [AIF]: CommData.updateRuleStatus - END
2015-01-14 08:53:25,749 FATAL [AIF]: Error in COMM Load Data
2015-01-14 08:53:25,749 DEBUG [AIF]: Comm.updateProcess - START
2015-01-14 08:53:25,751 DEBUG [AIF]: Comm.updateProcess - END
2015-01-14 08:53:25,752 DEBUG [AIF]: The fdmAPI connection has been closed.
2015-01-14 08:53:25,753 INFO [AIF]: FDMEE Process End, Process ID: 173

Yes it does. I was able to connect with planning and can see all planning dimensions in FDMEE. In this instance, everything is installed on the same box so it better be resolving the host

Informatica 7.1 for Hyperion Planning

Hi,
Kindly advice if we can use Informatica 7.1 for loading metadata into hyperion Planning or not; though i know Informatica OEM-DIM is available under Edelivery with Hyperion Planning ready.
But if any luck with Informatica 7.1 or any Adapters for Planning.
Regards
N Kumar

Hi Kumar,
We need the planning adapter to integrate with informatica 7.1. Without the Planning adapter, we can't select the Target Relational or Source Relational in Workflow Manager.
Thanks,
PC

Hyperion Planning to Oracle GL

Hi all,
We have requirement to load data from hyperion planning to oracle GL.
How can i do this?
Please guide me
Thanks

anyone ?
I read your john blog describe how to extract data from essbase using ODI
and implemet the same method, now as describe, we have odi on win and essbase on linux,
can it be resovled:
1. using maxl script, where i'll wrote the right patch to windoes server, and then ODI
will know to pull this? will it work using LKM Essbase to SQL
2. Should I use report script instead of calc sript?
Pls advice,
Ido

Loading Attribute Dimension - Hyperion Planning

Similar Messages

Maybe you are looking for