Loading cs4 with elements 7 (windows vista)

HELP! I want to load my new CS4 but I have Elements 7 now. I want to make certain that when I load CS4 that Elements 7 will automatically populate CS4 with all of my 20K photos and not lose them. Anybody done this before out there? (Held for one hour at Tech "support" and then called another number where they couldn't help.) On-line "chat" is always busy! Not sure I should even download this product if this is indicative of "support" from Adobe. (Comments on that from current users?) Thank you in advance!

I want to make certain that when I load CS4 that Elements 7 will automatically populate CS4 with all of my 20K photos and not lose them.
Huh? PS has no such thing as a catalog as it exists in Elements. This is all handled via Bridge. Meta data needs to be exported from PSE and then re-imported in Bridge to organize your files. The rest doesn't matter - neither program will do anything to harm your photos and both can open any standard image formats.
Mylenium

Similar Messages

Is Verizon going to acknowlege the problems with FIOS and Windows Vista

For months now, I have been reading the numerous problems Fios internet customers are having with Fios internet/Actiontech Router and Windows Vista and there has been no acknowledgement by Verizon of this current major issue.
I have also experienced the exact same issue for months now since I switched to Verizon FIOS internet. Previously I had Comcast HSI using my Windows Vista laptop. I had their service for over a year and I NEVER has a problem with the Windows Vista globe icon disappearing and loosing internet connection. The Globe always stayed on and never went away and I never lost connection when I had Comcast
I had Verizon FIOS installed last September with my Windows Vista computer and my wireless internet connection started to drop from day 1 and it has been a daily occurrence for over 5 months now. It has gotten so bad, I have had to hardwire my laptop to to be able to use the internet uninterrupted.
This is what daily scenario is:
When I turn on my laptop(with Windows Vista, I can initially get full internet access(with the globe on and it says "Local and internet). After about 10 minutes or less, the globe switches to "local only" and I can still get internet access. After another 5 or so minutes, a large X covers the globe and I lose internet connection entirely. The actiontech router wireless signal is no longer listed as one of the wireless networks. The only way for me to regain internet access is either to restart my laptop or reboot the actiontech router.
Numeorus posts here, over by DSL forums(Broadband Reports),Microsoft's website and a few othere websites detail this issue.
I am extremely shocked and surprised that Verizon has not tried to fix this issue by working with both the makers of the Actiontech Router as well as Microsoft to find out what the problem is and how to fix it.
I would just like to reiterate I strongly believe this is primarily a FIOS internet issue since I previously had Comcast HSI for over a year with the same Windows Vista laptop and I NEVER had that problem. Also, I can connect to my neighbors wireless connection(she uses Comcast HSI) and when I do, the globe stay on all the time on my computer and the internet does not lose connection.
I know that there are a couple of Verizon employees here. Please tell the higher ups who handle FIOS internet that this is a major issue that needs to be resolved as soon as possible.
P.S: Please don't tell me to go by my own router because then, I will have to deal with the issues of setting it up to work with Fios TV and the related VOD, widgets, remote DVR compatability issues to deal with. I don't think I can deal with the additional headaches.

FIOS is short for fiber optics. fiber optics is different technology than DSL.
With that said, if you search the Microsoft databases for vista issues with fiber optics, (CURRENTLY THERE IS ONLY ONE PROVIDER OF FIBER TO THE HOUSE, that being Verizon, so yes you can also search Vista issues with verizon and\or fios) and you will find that Microsoft already acknowledges this issue with their software. AND they offer you a fix.
cjacobs001

With ITunes in Windows Vista, I've attempted to drag and drop a homemade video folder but it doesn't show up in my ITunes library. What should I be doing differently?

With ITunes in Windows Vista, I've attempted to drag and drop a homemade video folder from my Desktop to ITunes on the PC in order to transfer it to my IPad (as per instructions), but it doesn't show up in my ITunes library. What else should I be doing?

Do you have any videos/movies in the video app?
In iTunes if you right click on the video and select Get Info and go to the Option tap what Media Type is shown?

Weird CS4 hanging issue in windows Vista when opening files with PS already loaded

I just installed the demo. I have a dual monitor setup running Windows Vista Ultimate x64 with 8GB ram ...
It appears I have both the 32bit and 64bit versions of PS CS4 installed. If I open either of these apps, then choose say a jpg on my desktop, right-click in windows, choose, 'open with' and select 'Adobe Photoshop CS4', then PS hangs - period. After a while, clicking the title bar of the app (which is a kind of menu bar in this version) causes it to return to the old look windows title bar where it shows my image name and the zoom etc, but with the usual (Not Responding) at the end of the title bar text!
It does this no matter which version (32 or 64bit) is presently loaded. It also does it if I have CS4 loaded and I select 'Edit with Photoshop' in Lightroom 2.1 (my main app which is configured to output files in 16bit PSD format).
Another weird quirk I found in CS4 - if I select 'Help', 'System Info' it displays the info on my second monitor, not my first! I figure this by the screen res shown as my second monitor (monitor 3 in Vista) is only running 1280x1024. Not sure if this has an effect on which monitor profile is used by PS - I would hope not as my 1st monitor is my calibrated one!
Thanks, Paul

Freeagent - I just did some more testing and figured the issue I think! I had selected 'Enable OpenGL Drawing' in Performance preferences and even though I have the very latest nVidia driver (downloaded today) this still causes this issue!
One issue I have noticed though since figuring how to fix this - I have 2 monitors and on the left one I have the panels un-docked and laid out neatly on the desktop. I then have the main PS window with it's height shrunk as slim as possible and filling the top width of my 2nd monitor. In CS3 when I open an image, it generally remembers where the last one opened and uses the same place - this includes if I had the image in its own window on my main monitor. In CS4, it seems to want to open them in tabbed dialogs within the PS main window and for some reason they are on minimal magnification, so I need to drag the tab over to my main monitor every time and zoom in to get a decent size displayed.
Is there anywhere to configure where you want it to open images?
Thanks, Paul

Right click Open With sometimes not working (Photoshop Elements 9, Windows Vista)

We recently upgraded from Photoshop Elements 7 to Photoshop Elements 9. We are running Windows Vista.
Last night, my wife was right clicking on JPEG images in her My Pictures subfolders and choosing "Open With" to open the files with Photoshop Elements. In some cases, this worked. In other cases she would right click the file, Adobe Photoshop Elements would start, but the picture itself would not display.
I tested one of these pictures and was able to open it with other applications, and was able to open it by choosing "Open" from Photoshop Elements' file menu.
Has anyone run into this before? Why are some pictures not opening when you right-click and use "Open With"?

Hi,
you can make PSE9 default program for opening any image on you vista machine.
Then it souhld work fine.
cheers,
Sam

Error trying to install CS4 design premium on windows vista home premium

I'm having trouble installing CS4 design premium, as soon as it does the checking system it comes up with an error that says I need windows XP sevice pack 2 and some other windows. I have Windows vista home premium and all the other requirements, so i'm not sure why it's saying that? I do have CS3 installed but I didn't want to unistall it before I installed the CS4, cause then I wouldn't have anything to work on. The CS4 is brand new and I have it installed with no problems on another computer that has windows XP. Would I have to uninstall CS3 before I try to install it? I'm afraid that I will be left with neither if I do that and this was not a cheap investment to take that chance. Does anyone know how I could get CS4 design premium installed?
Thank you
Jorge Gonzalez

You should npt have to uninstall anything except Acrobat for CS4 to install. You can call tech support for free installation support.

Burning issues with itunes and Windows Vista Ultimate

I recently purchased a new computer with Windows Vista Ultimate 64 bit version. Since loading itunes on my new computer I can not burn a CD. The message that I receive says that there is no burner available. I know the burner works because I have burned music out of different software programs. I have loaded and reloaded Nero 7 but I am finding that is not the problem. Itunes does not recognize any type of CD burner on my computer. Any thoughts?
Thanks

paul's onto it.
if you run your DVD/CD diagnostics (in itunes "help > DVD/CD diagnostics", select DVD/CD diagnostics) and you see a 2380 error showing up down near the bottom of the diagnostics (you may need to scroll down a bit), try reinstalling the 64-bit version of the GEAR drivers iTunes uses for importing and burning.
here's a link through to the GEAR drivers. note that there are two different versions of the 64-bit drivers. be sure to get the one that matches your hardware:
GEAR drivers

Photoshop elements on Windows Vista

Hello, I have Photoshop Elements version 2.0 and I will have a new computer with Windows Vista. I would like to know if I will encounter difficulties during the installation and later.

If you haven't, I wouldn't do it...
See this thread:
julie e klein, "Cannot uninstall elements 2 from Vista computer" #, 10 Dec 2007 8:30 am

MSI 975X PROBLEM WITH INSTALLATION ON WINDOWS VISTA

I have MB MSI-975X PLATINUM v.1 withbios ver 1.3,processor Pentium D940 (3,2GHz/800/2x2MB),2X512MB DDR-2 667MHz,in the beginning when I start the installation on WINDOWS VISTA the computer is bloked od it is restart.This problem I solved when I put another processor INTEL 541(3,2GHz/800/1MB) whit this processor everthing is ok,but with INTEL 940 it can not be install WINDOWS VISTA .
I’m asking you for a new superstructure on bios update .

Beta 2 or RC1 candidate???? RC1 should support..........
Beta 2 is real, slow and you have alot of updates to DL, but both are pre-release products and will not work 100%.
Even when Vista is released, they will still be alot of hardware that will not work 100% and this is purely because software is always playing catch up to hardware.
It was only September, when Nvidia released some Beta2/RC1 drivers that worked properly........

Error when use Crystal report Bundled Version with Vs2003 on Windows Vista

Post Author: MartinoLuccarelli
CA Forum: .NET
Hi, I have developed a software with Vs2003 that uses Crystal report Bundled Version. I have created a Installation package that include the merge modules, and i have entered the Licence Key for Crystal_regWiz2003 module. If i install and use the software in the computer with XP or Windows 2000 I do not have problems. But when i install the software on the PC with Windows Vista i have this error when the probram show a report "Operazine di Crystal Report non Riuscita perche' non e' stato possibile ottenere una licenza gratuita nel tempo allocato" Thank's

Uninstall CRVS2010 that you currently have installed.
To remove the assemblies from the GAC use gacutil. Google will get you a number of links on how to. Also, see the KB [1535325 - How to remove CRVS2010 Beta 2|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333533333335333333323335%7D.do].
Reinstall CRVS2010 SP1 from here:
SAP Crystal Reports, developer version for Microsoft Visual Studio: Updates & Runtime Downloads [original link is broken]
- Ludek

Network problems with TC and windows vista

When I try to transfer data from my laptop using Windows vista to the TC, I get an network error message after a few seconds saying the computer is not connected to the network. I have no problems transferring small files (that take less than a few seconds to transfer) and the external router, my laptop and the TC are located close to each other. I tried almost everything but i don't know what the problem is.
Any suggestions?

Hello Bastiaandp. Welcome to the Apple Discussions!
There is quite a bit of dialogue going around the Internet about Windows Vista & Windows 7 when it comes to file sharing with either the Apple AirPorts or Time Capsules. Most of this dialogue seems to be revolving around the version of SMB used by the newer Microsoft OSs and that used by these routers for files sharing.
A number of suggested solutions have been proposed, but none at this time, have provided a "permanent" solution. I too have experienced this same issue and have tried a number of these solutions. What finally worked for me was to make sure that: 1) The Workgroup name used on my Win 7 computer exactly matched the Workgroup name setting on the Disks > File Sharing tab within the AirPort Utility for my base station, & 2) That this name did NOT include any spaces. In my case, I used WORKGROUP for both settings.
Since doing so over six months ago, I have had no problems copying/moving files between my PC and the AirPort, regardless of their size.

Problems with iTunes and Windows Vista

I just got a new dell computer that came with Windows Vista. I'm new to Vista, and just downloaded iTunes. I was able to add my music and it will play, but I can't edit track information. I downloaded iTunes from the administrator account, so I don't know what the problem is or how to fix it. Please help!!

For windows vista, like someone suggested, it may change your permission for editing a file and appear grey screen. As such, the following step might solve this problem.
Go to "Computer", go to your portable hard drive, right click and go to "Properties". Select "Security" Under the "group and user names" choose your user name. To change the permission, choose "Edit" Under permission column, choose "Full Control". After this you may able to edit song information in your itunes.

Problems with USB on Windows Vista - Satelltie A210 (PSAFGE)

Hi!
I just bought myself a new notebook - Toshiba A210 - 15Y (PSAFGE) with Windows Vista preinstalled. The problem is that the notebook doesn't want to work with any USB devices. Whether I try to use a simple USB stick, a mp3 player - he always asks for drivers. The first time I connected my mobile phone via USB it all worked.
When I tried it for the 2nd, 3rd etc. time it doesn't work. He always asks for drivers. Ok, so I installed the drivers for the phone - but the problem wasn't solved by this.
The Card-Reader is another problem - when I tried to use a SD-Card, he again asked for drivers.
Does anybody have an idea how to solve this problem?

Hi,
I'd advise you to reinstall Vista using the recovery cd that came with the laptop. Also, check in the device manager whether all the devices are installed correctly.
Come back if the problem persists, we'll think of something else.

Problems with iTunes on Windows Vista...please help

All started with my Laptop recognizing my iPad and iTouch just as a camera
I keep getting this error in spite of all the methods already listed....one step from formatting....this is the order of appearance of the errors please i need help
ALREADY TRIED:
-Uninstall-reinstall
-new ADMIN STAT user
-Cleaning APPLE related archives and reinstalling
-opening install with WinRAR and selecting what to install
-all forum solutions
Im using Windows Vista
THX

... I'm not sure I've ever helped someone from the Canary Islands before ...
Fault Module Name: mcicda.dll
Fault Module Version: 6.0.6000.16386
That's part of your Windows operating system, relating to the MCI driver for cdaudio devices.
Perhaps try running an sfc /scannow as per:
[How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista or on Windows 7|http://support.microsoft.com/kb/929833]
Does sfc repair any files? If so, does your iTunes start launching properly again afterwards?

Is Magic Mouse compatible with PC and Windows Vista

Hello to everyone, I'm a new member of this forum, I hope someone will help me, please.
I'm taking a look at the latest beautiful Apple's product and I felt in love with Magic Mouse, I'd like to have it for ma PC (not a Mac) with OS Vista.
Is there anyboby who knows if this mouse is compatible with a Pc and Windows Vista OS?
Actually I don't have bluetooth thecnology on my pc but if Magic Mouse were compatible I'd buy an usb adaptor.
Thanks to everyone will help e!

I asked a similar question a few hours back and no answers yet. I think nobody knows since nobody has had the chance to test them. If previous releases are any indication, you'll probably get basic functionality because it is bluetooth, but for the advanced features or setting options you'll have to wait for a Windows driver, which can sometimes take a few months or more.
My thread: http://discussions.apple.com/thread.jspa?threadID=2205313

Loading cs4 with elements 7 (windows vista)

Similar Messages

Maybe you are looking for