Loading data from a flatfile versus xml
As of now we are loading data from the AS400 by using flatfiles.
For the sake of uniformity and flexibility we want to start using xml instead of flatfiles.
But for what I have seen the loading of xml seems to be a lot slower then flatfiles.
I think I have to chose between two options
Loading infto xlmldb - XMLTYPE
or
make use of DBMS_XMLSTORE.
I think it would be best to use the pl/sql package because we will not need extra storage for the xml table and then the fastest way should be dbms_xmlstore since it is written in c.
If someone can come up with another, faster way, fine with me.
If I want to use the package I have the following problem.
I know how to tell which columns to load but my source xmlfile needs to be stored in at least 2 tables.
It was possible with wb_xml_load but I think dbms_xmlstore is the faster solution.
Can anybody tell me how to proceed?
A little performance degradation is OK but we still need to load lots of data, so the faster the better.
regards.
Hi Priya
There is a post on leveraging XDB with some interesting details;
http://blogs.oracle.com/warehousebuilder/2007/09/leveraging_xdb.html
Cheers
David
Similar Messages
-
How to load data from oracle table to XML using ODI ?
Hello Team
I am trying to load data from an oracle table to an xml file. I have configured the physical and the logical schemas for the same. I have used SQL to SQL as LKM and SQL to SQL Append as IKM with Sunopsis Memory Engine as staging area.
After this, when I am executing the interface, it is executed without any errors but to my surprise I am not finding the relevant data in the xml file. What could be the reason ?
Please look into this and lemme know how to solve it.
Thanks.908458 wrote:
Hello Phanikanth
Even IKM SQL Control Append is not solving the problem. There are many " order columns" in the target xml table. I have not mapped them or specified any order. Does the problem persist because of this ?
Thanks
Manoj
Ocle to XML file loading issue in ODI 10.1.3.5 -
Loading data from flatfile to relational table,i am getting SQLLDR error
Hi,
While loading data from flatfile to relational table,i am getting SQLLDR error and i am unable to proceed further.
Source is a flatfile and target is a Oracle database,i used "LKM file to oracle(SQLLDR)" and "IKM sql control append"
and ran the interface.When i checked the seesion in operator window" after generating "CTL file" successfully
the session got failed at "Call sqlldr" and was not able to proceed further.
Environment details:
ODI 11g
database:Oracle 11g
Operating system:Windows server 2008
The error message it displayed in call sqlldr session file was
org.apache.bsf.BSFException: exception from Jython:
Traceback (innermost last):
File "<string>", line 31, in ?
File "C:\oracle\product\11.1.1\Oracle_ODI_1\oracledi\client\odi\bin\..\..\jdev\extensions\oracle.odi.navigator\scripting\Lib\javaos.py", line 198, in system
File "C:\oracle\product\11.1.1\Oracle_ODI_1\oracledi\client\odi\bin\..\..\jdev\extensions\oracle.odi.navigator\scripting\Lib\javaos.py", line 224, in execute
OSError: (0, 'Failed to execute command ([\'sh\', \'-c\', \'sqlldr DEVELOPER/pass_123@CPRDEV control="F:\\\\flatfile/CROSS_CURR.ctl" log="F:\\\\flatfile/CROSS_CURR.log" > "F:\\\\flatfile/CROSS_CURR.out" \']): java.io.IOException: Cannot run program "sh": CreateProcess error=2, The system cannot find the file specified')
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:345)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:169)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2374)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java:1615)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java:1580)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java:2755)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2515)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:534)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:449)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1954)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:322)
at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:224)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:246)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:237)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:794)
at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:114)
at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
at java.lang.Thread.run(Thread.java:619)
could u give me a solution to sort out this error ASAP.
thanks,
keshav.This was the following code generated .
import java.lang.String
import java.lang.Runtime as Runtime
from jarray import array
import java.io.File
import os
import re
import javaos
def reportnbrows():
f = open(r"F:\flatfile/TEST.log", 'r')
try:
for line in f.readlines():
if line.find("MAXIMUM ERROR COUNT EXCEEDED")>=0 :
raise line
finally:
f.close()
ctlfile = r"""F:\flatfile/TEST.ctl"""
logfile = r"""F:\flatfile/TEST.log"""
outfile = r"""F:\flatfile/TEST.out"""
oracle_sid=''
if len('CPRDEV')>0: oracle_sid = '@'+'CPRDEV'
loadcmd = r"""sqlldr DEVELOPER/<@=snpRef.getInfo("DEST_PASS") @>%s control="%s" log="%s" > "%s" """ % (oracle_sid,ctlfile, logfile, outfile)
rc = os.system(loadcmd)
if rc <> 0 and rc <> 2:
raise "Load Error", "See %s for details" % logfile
if rc==2:
reportnbrows() -
Issue to load data from database to XML file. error: ODI-40768
Hi,
While I am trying to load data from database to XML following error is appearing.
ODI-1228: Task TEST_XML_DATA (Integration) fails on the target XML connection MyLOCALXSD.
Caused By: java.sql.SQLException: ODI-40768: Could not save the file <default>:C:\DATA_FILE\www.xml because a class java.io.IOException occurred and said: The filename, directory name, or volume label syntax is incorrect
at com.sunopsis.jdbc.driver.xml.SnpsXmlFile.writeToFile(SnpsXmlFile.java:751)
at com.sunopsis.jdbc.driver.xml.SnpsXmlConnection.internalExecute(SnpsXmlConnection.java:769)
at com.sunopsis.jdbc.driver.xml.SnpsXmlPreparedStatement.execute(SnpsXmlPreparedStatement.java:46)
at oracle.odi.runtime.agent.execution.sql.SQLCommand.execute(SQLCommand.java:166)
at oracle.odi.runtime.agent.execution.sql.SQLExecutor.execute(SQLExecutor.java:102)
at oracle.odi.runtime.agent.execution.sql.SQLExecutor.execute(SQLExecutor.java:1)
at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:540)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:338)
at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:272)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:263)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:822)
at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:83)
at java.lang.Thread.run(Thread.java:662)
jdbc url: jdbc:snps:xml?d=C:\test_xsd.xsd&s=TESTSQL&re=employeesX&ro=true
physical schema: TESTSQL
Knowledge modules are:
LKM: LKM SQL to SQL
IKM: IKM XML Control Append
CKM: CKM SQL
Parameters set are:
CREATE_XML_FILE: true
XML_PATH:<default>:C:\DATA_FILE\www.xml
I have tried to change the directory path but error is still there.
Could some one please help me to resolve the issue?
Regards,
user1672911Hi,
The trouble in "<default>:" - if you set XML_PATH as C:\DATA_FILE\www.xml instead <default>:C:\DATA_FILE\www.xml- it will work correctly.
Greetings,
Eugene -
Load data from xml file in oracle data base
Hi all,
I'd like to know if is posible to load data from a file xml into a table of oracle data base through SQL*LOADER, loaded only in a normal column no with type XMLType , for example
I have a xml file
<person name="kate" surname="fari" city="new york" >
<son name="faus" age="18"/>
<son name="doly" age="10"/>
</person>
and I load in table :
table :person
column
name surname city
kate fari new york
table : son
name age
doly 10
faus 18
thank you for your return !!!!!!!!!
Ninova
Edited by: user10474037 on 30 mai 2011 08:47
Edited by: user10474037 on 30 mai 2011 08:48
Edited by: user10474037 on 30 mai 2011 08:48
Edited by: user10474037 on 30 mai 2011 08:49
Edited by: user10474037 on 30 mai 2011 08:50Hi
This May be found at
SQL Loader to upload XML file -
Help - Step by Step Material on How to load Data from flatfile to BI 7.0
Hi BI Experts,
Can any one send the document or a pdf file on how to load data from flat file to BI 7.0 in step by step process.
Thanks in Advance
Regards
Ramakrishna Kamurthy
+91-99631010731. On log on you will be placed in the SAP Easy Access Strategic Management/ Business Analytics
1. You see the screen divided in two segments.
2. Follow the left segment.
3. Click on the Business Information Warehouse.
4. Sub Menu  BW Administration.
5. You find various entries in it.
6. Now double click on UG_BW_RSA1-Administrator Workbench
2. Creation of Info Area
1. Click on InfoObjects.
2. Now in the right hand side screen select the InfoObjects (First item on the top). Right click the mouse and select Create InfoArea.
3. A dialog box pops up.
4. Give the InfoArea as ZIVY_Iarea.
5. Give the Long Description as ZIVY Info Area.
3. Create a Catalog:
1. Select the InfoArea just created ZIVY_Iarea.
2. Right click the mouse pointer and select the option Create InfoObject Catalog
3. A dialog box pops up.
4. Give the InfoObjCat = ZIVY_CHCAT
i. Description = ZIVY Character Catalog
ii. InfoObjectType: Check the Character. ( As we are creating the master data, check the Character)
iii. Now at the bottom of this dialog box you see an icon called CREATE. Click this icon.
1.
1. The next screen in front of you is the Edit InfoObject Catalog.
2. Simply click the activate icon present on the Application Toolbar.
2. Create InfoObject :
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_CUST and
i. Description Customer Info Object
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_CUST: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: CHAR
2. Length: 10
ii. In the Master Data/ Texts Tab:
1. Check the With Master Data and With Texts.
2. Use suitable formats in the fields.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
iv. In the Attributes Tab:
1. We need to create the Attribute InfoObjects. These could be done directly from here or even from the RSA1  InfoObject  ZIVY_IareaZIVY_CHCAT. This will be delt in the forth coming steps (STEP .
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the ZIVY_CUST, by clicking the icon ACTIVATE
2. Creation of InfoObject: ZIVY_CITY
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_CITY and
i.
Description
Customer
City Name.
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_CITY: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: CHAR
2. Length: 25
ii. In the Master Data/ Texts Tab:
1. Uncheck the With Master Data and With Texts.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the InfoObject ZIVY_CITY, by clicking the icon ACTIVATE.
2. Creation of InfoObject: ZIVY_STATE
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_STATE and
i.
Description
Customer
State Name.
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_STATE: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: CHAR
2. Length: 25
ii. In the Master Data/ Texts Tab:
1. Uncheck the With Master Data and With Texts.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the InfoObject ZIVY_STATE, by clicking the icon ACTIVATE.
2. Creation of InfoObject: ZIVY_CTRY
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_CTRY and
i. Description Customer Country Name.
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_CTRY: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: CHAR
2. Length: 10
ii. In the Master Data/ Texts Tab:
1. Uncheck the With Master Data
2. Check the With Texts and make suitable Text Table Properties.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the InfoObject ZIVY_CTRY, by clicking the icon ACTIVATE.
1. Creation of Attributes and InfoObject from the ZIVY_CUST InfoObject:
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. In this ZIVY_CHCAT, you see the InfoObject ZIVY_CUST. Double click the InfoObject ZIVY_CUST.
6. You find the screen Change Characteristic ZIVY_CUST:Detail.
7. Click on the tab Attributes
8. In the Character Attribute Box, type ZIVY_CITY and enter the ENTER KEY.
9. You see the relevant information regarding this being inserted.
10. Similarly, type ZIVY_STATE, ZIVY_CTRY.
11. Now, we will create another InfoObject ZIVY_TEL, from here.
12. So type ZIVY_Tel and enter the ENTER KEY.
13. A dialog box pops up, and request you If you want to Create an InfoObject
14. Select Create Attribute As Characteristic and click the check mark.
15. Another window pops up. Give the following:
i. In the General Tab:
1. Long Description: ZIVY Telephone Number
2. Short Description: ZIVY Telephone Number
3. DataType : NUMC
4. Length : 10
5. Uncheck Attribute Only
ii. In the Master Data/ Texts Tab:
1. Uncheck the With Master Data and With Texts.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies
iv. Now click the TICK MARK
1.
1. Click the ACTIVATE
2. A window pops up.
i. Select activate dependent InfoObjects.
ii. Click the Check Mark.
1. Creation of InfoObject: ZIVY_DATE
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_DATE and
i. Description ZIVY Date.
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_DATE: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: DATS
2. Length: 8
ii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the InfoObject ZIVY_CTRY, by clicking the icon ACTIVATE.
2. Create ZIVY Application Component:
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Right click the mouse pointer and select the entry Create Application Component
5. A window pops up.
i. Application Component: ZIVY_APPCOMP
ii. Long Description : ZIVY Application Component
iii. Click the check mark.
1. Create InfoSoure:
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Select the application component you created ZIVY_APPCOMP alias ZIVY Application Component.
5. Right click the mouse pointer and select the entry Create InfoSource
6. A window pops up:
i. Select the Direct Update of Master Data
ii. InfoObject : ZIVY_CUST
iii. Click the CHECK MARK.
1.
1. Now beneath ZIVY Application Component you see the Customer Info Object.
2. Select the Customer Info Object mentioned above.
3. Right click the mouse pointer, and select the entry Assign DataSource.
4. A window pops up.
i. InfoSource: ZIVY_CUST
ii. Source System: FLATFILE
iii. Check the TICK MARK.
iv. Just click yes for the coming window pop ups.
1.
1. Key thing
i. Click on the tab Transfer Rules
1. Have a look at the data mapping here.
2. First field is ZIVY_CUST,
3. Second field is ZIVY_CITY.
4. And so on.
5. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file. ii. Click on the tab DataSource/Transport Structure1. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file.
2. If the order is different, just shuffle the rows.
iii. Click the Activate Button. By clicking the ACTIVATE BUTTON you just activated the ZIVY_CUST MASTER DATA.
iv. Now in DataSource : select the text.
v. Click on the tab Transfer Rules
1. Have a look at the data mapping here.
2. First Field : 0LANGUAGE
3. Second field is ZIVY_CUST,
4. Third field is 0TXTMD.
5. Click the Transfer Rule adjacent to 0LANGUAGE
6. A window pops up.
a. Check the CONSTANT and give the value as EN
b. Click the TICK MARK.
7. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file. Ignore the first field, as it is a constant. vi. Click on the tab DataSource/Transport Structure1. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file.
2. If the order is different, just shuffle the rows.
vii. Click the Activate Button. By clicking the ACTIVATE.
1. Create the DATA required for this MASTER DATA
1. Open EXCEL.
2. Type the following data:
1.
1. Save as ZIVY_CUST_MASTER.CSV
2. The file should be saved in COMMA SEPARATED FORMAT.
3. Open EXCEL
4. Type the following data:
5. Save the file *** ZIVY_CUST_TEXT.CSV
1. Create InfoPackage
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Select the application component you created ZIVY_APPCOMP alias ZIVY Application Component.
5. Beneath this, you see ZIVY_CUST alias Customer Info Object
6. Beneath this you see a FLAT FILE.
7. Select this FLAT FILE, right click the mouse pointer and select the option Create InfoPackage.
8. A window pops up.
i. InfoPackage Description: Info package for ZIVY_CUST_ATTR.
ii. Select ZIVY_CUST_ATTR
iii. Click the CHECK MARK
1.
1. You see a new screen Scheduler (Maintain InfoPackage).
2. Click the tab External Data
i. Name of file: C:\Personal\SAP\MyWork\MyBW\ZIVY_CUST_MASTER.csv
ii. Check the CSV file.
iii. Click the Preview Button.
iv. A window pops up, click the CHECK MARK.
v. You see the data present in the EXCEL File.
1.
1. Click the tab Update
i. Have a look at the entries.
1.
1. Click the tab: Scheduler:
i. Click the button Start
ii. You now click on MONITOR BUTTON present on the tool bar.
iii. Browse the data.
1. Create InfoPackage
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Select the application component you created ZIVY_APPCOMP alias ZIVY Application Component.
5. Beneath this, you see ZIVY_CUST alias Customer Info Object
6. Beneath this you see a FLAT FILE.
7. Select this FLAT FILE, right click the mouse pointer and select the option Create InfoPackage.
8. A window pops up.
i. InfoPackage Description: Info package for ZIVY_CUST_TEXT.
ii. Select ZIVY_CUST_TEXT
iii. Click the CHECK MARK
1.
1. You see a new screen Scheduler (Maintain InfoPackage).
2. Click the tab External Data
i. Name of file: C:\Personal\SAP\MyWork\MyBW\ZIVY_CUST_TEXT.csv
ii. Check the CSV file.
iii. Click the Preview Button.
iv. A window pops up, click the CHECK MARK.
v. You see the data present in the EXCEL File.
1.
1. Click the tab Update
i. Have a look at the entries.
1.
1. Click the tab: Scheduler:
i. Click the button Start
ii. You now click on MONITOR BUTTON present on the tool bar.
iii. Browse the data.
1. Create InfoObject :
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_MAT and
i. Description ZIVY Material Info Object
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_MAT: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: CHAR
2. Length: 10
ii. In the Master Data/ Texts Tab:
1. Check the With Master Data and With Texts.
2. Use suitable formats in the fields.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
iv. In the Attributes Tab:
1. We need to create the Attribute InfoObjects. These could be done directly from here or even from the RSA1  InfoObject  ZIVY_IareaZIVY_CHCAT. This will be delt in the forth coming steps (STEP 17).
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the ZIVY_MAT, by clicking the icon ACTIVATE
2. Creation of InfoObject: ZIVY_GROUP
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_GROUP and
i. Description ZIVY Material Group.
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_GROUP: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: CHAR
2. Length: 10
ii. In the Master Data/ Texts Tab:
1. Uncheck the With Master Data
2. Check the With Texts and make suitable Text Table Properties.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the InfoObject ZIVY_GROUP, by clicking the icon ACTIVATE.
2. Creation of InfoObject: ZIVY_COLOR
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_COLOR and
i. Description ZIVY Material Color.
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_COLOR: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: CHAR
2. Length: 10
ii. In the Master Data/ Texts Tab:
1. Uncheck the With Master Data and With Texts.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the InfoObject ZIVY_COLOR, by clicking the icon ACTIVATE.
2. Creation of InfoObject from the ZIVY_MAT InfoObject:
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. In this ZIVY_CHCAT, you see the InfoObject ZIVY_MAT. Double click the InfoObject ZIVY_MAT.
6. You find the screen Change Characteristic ZIVY_MAT:Detail.
7. Click on the tab Attributes
8. In the Character Attribute Box, type ZIVY_GROUP and enter the ENTER KEY.
9. You see the relevant information regarding this being inserted.
10. Similarly, type ZIVY_COLOR.
11. Click the ACTIVATE
3. Create InfoSoure:
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Select the application component you created ZIVY_APPCOMP alias ZIVY Application Component.
5. Right click the mouse pointer and select the entry Create InfoSource
6. A window pops up:
i. Select the Direct Update of Master Data
ii. InfoObject : ZIVY_MAT
iii. Click the CHECK MARK.
1.
1. Now beneath ZIVY Application Component you see the ZIVY Material Info Object.
2. Select the ZIVY Material Info Object mentioned above.
3. Right click the mouse pointer, and select the entry Assign DataSource.
4. A window pops up.
i. InfoSource: ZIVY_MAT
ii. Source System: FLATFILE
iii. Check the TICK MARK.
iv. Just click yes for the coming window pop ups.
1.
1. Key thing
i. Click on the tab Transfer Rules
1. Have a look at the data mapping here.
2. First field is ZIVY_MAT,
3. Second field is ZIVY_GROUP.
4. Third field is ZIVY_COLOR.
5. Check the mapping. If you dont see the mapping.
6. Click on the empty row in the group Assign InfoObjectField, the box to the right.
7. Type ZIVY_GROUP, ZIVY_COLOR.
8. Check the transfer rules.
9. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file. ii. Click on the tab DataSource/Transport Structure1. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file.
2. If the order is different, just shuffle the rows.
iii. Click the Activate Button. By clicking the ACTIVATE BUTTON you just activated the ZIVY_CUST MASTER DATA.
iv. Now in DataSource : select the text.
v. Click on the tab Transfer Rules
1. Have a look at the data mapping here.
2. First Field : 0LANGUAGE
3. Second field is ZIVY_MAT,
4. Third field is 0TXTSH.
5. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file. Ignore the first field, as it is a constant. vi. Click on the tab DataSource/Transport Structure1. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file.
2. If the order is different, just shuffle the rows.
vii. Click the Activate Button. By clicking the ACTIVATE.
1. Create the DATA required for this MASTER DATA
1. Open EXCEL.
2. Type the following data:
1.
1. Save as ZIVY_Material_MASTER.CSV
2. The file should be saved in COMMA SEPARATED FORMAT.
3. Open EXCEL
4. Type the following data:
5. Save the file *** ZIVY_Material_TEXT.CSV
1. Create InfoPackage
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Select the application component you created ZIVY_APPCOMP alias ZIVY Application Component.
5. Beneath this, you see ZIVY_MAT alias ZIVY Material Info Object
6. Beneath this you see a FLAT FILE.
7. Select this FLAT FILE, right click the mouse pointer and select the option Create InfoPackage.
8. A window pops up.
i. InfoPackage Description: Info package for ZIVY_MAT_ATTR.
ii. Select ZIVY_MAT_ATTR
iii. Click the CHECK MARK
1.
1. You see a new screen Scheduler (Maintain InfoPackage).
2. Click the tab External Data
i. Name of file: C:\Personal\SAP\MyWork\MyBW\ZIVY_Material_MASTER.csv
ii. Check the CSV file.
iii. Click the Preview Button.
iv. A window pops up, click the CHECK MARK.
v. You see the data present in the EXCEL File.
1.
1. Click the tab Update
i. Have a look at the entries.
1.
1. Click the tab: Scheduler:
i. Click the button Start
ii. You now click on MONITOR BUTTON present on the tool bar.
iii. Browse the data.
1. Create InfoPackage
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Select the application component you created ZIVY_APPCOMP alias ZIVY Application Component.
5. Beneath this, you see ZIVY_MAT alias ZIVY Material Info Object
6. Beneath this you see a FLAT FILE.
7. Select this FLAT FILE, right click the mouse pointer and select the option Create InfoPackage.
8. A window pops up.
i. InfoPackage Description: Info package for ZIVY_MAT_TEXT.
ii. Select ZIVY_MAT_TEXT
iii. Click the CHECK MARK
1.
1. You see a new screen Scheduler (Maintain InfoPackage).
2. Click the tab External Data
i. Name of file: C:\Personal\SAP\MyWork\MyBW\ZIVY_MATERIAL_TEXT.csv
ii. Check the CSV file.
iii. Click the Preview Button.
iv. A window pops up, click the CHECK MARK.
v. You see the data present in the EXCEL File.
1.
1. Click the tab Update
i. Have a look at the entries.
1.
1. Click the tab: Scheduler:
i. Click the button Start
ii. You now click on MONITOR BUTTON present on the tool bar.
iii. Browse the data.
1. Create InfoObject :
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_SPER and
i. Description ZIVY Sales Person Info Object
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_SPER: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: CHAR
2. Length: 20
ii. In the Master Data/ Texts Tab:
1. Check the With Master Data and With Texts.
2. Use suitable formats in the fields.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
iv. In the Attributes Tab:
1. We need to create the Attribute InfoObjects. These could be done directly from here or even from the RSA1  InfoObject  ZIVY_IareaZIVY_CHCAT. This will be delt in the forth coming steps (STEP 24).
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the ZIVY_SPER, by clicking the icon ACTIVATE
2. Creation of InfoObject: ZIVY_SREG
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_SREG and
i. Description ZIVY Sales Region.
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_SREG: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: CHAR
2. Length: 20
ii. In the Master Data/ Texts Tab:
1. Check the With Master Data and With Texts.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the InfoObject ZIVY_SREG, by clicking the icon ACTIVATE.
2. Creation of Attributes from the ZIVY_SPER InfoObject:
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. In this ZIVY_CHCAT, you see the InfoObject ZIVY_SPER. Double click the InfoObject ZIVY_SPER.
6. You find the screen Change Characteristic ZIVY_SPER:Detail.
7. Click on the tab Attributes
8. In the Character Attribute Box, type ZIVY_SREG and enter the ENTER KEY.
9. You see the relevant information regarding this being inserted.
10. Click the ACTIVATE
3. Create InfoSoure:
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Select the application component you created ZIVY_APPCOMP alias ZIVY Application Component.
5. Right click the mouse pointer and select the entry Create InfoSource
6. A window pops up:
i. Select the Direct Update of Master Data
ii. InfoObject : ZIVY_SPER
iii. Click the CHECK MARK.
1.
1. Now beneath ZIVY Application Component you see the ZIVY Sales Person Info Object.
2. Select the ZIVY Sales Person Info Object mentioned above.
3. Right click the mouse pointer, and select the entry Assign DataSource.
4. A window pops up.
i. InfoSource: ZIVY_SREP
ii. Source System: FLATFILE
iii. Check the TICK MARK.
iv. Just click yes for the coming window pop ups.
1.
1. Key thing
i. Click on the tab Transfer Rules
1. Have a look at the data mapping here.
2. First field is ZIVY_SPER,
3. Second field is ZIVY_SREG.
4. Check the mapping. If you dont see the mapping.
5. Click on the empty row in the group Assign InfoObjectField, the box to the right.
6. Check the transfer rules.
7. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file. ii. Click on the tab DataSource/Transport Structure1. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file.
2. If the order is different, just shuffle the rows.
iii. Click the Activate Button. By clicking the ACTIVATE BUTTON you just activated the ZIVY_SREP MASTER DATA.
iv. Now in DataSource : select the text.
v. Click on the tab Transfer Rules
1. Have a look at the data mapping here.
2. First Field : 0LANGUAGE
3. Second field is ZIVY_SPER,
4. Third field is 0TXTSH.
5. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file. Ignore the first field, as it is a constant. vi. Click on the tab DataSource/Transport Structure1. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file.
2. If the order is different, just shuffle the rows.
vii. Click the Activate Button. By clicking the ACTIVATE.
1. Create the DATA required for this MASTER DATA
1. Open EXCEL.
2. Type the following data:
1.
1. Save as ZIVY_SREP_MASTER.CSV
2. The file should be saved in COMMA SEPARATED FORMAT.
3. Open EXCEL
4. Type the following data:
5. Save the file *** ZIVY_SREP_TEXT.CSV
1. Create InfoPackage
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Select the application component you created ZIVY_APPCOMP alias ZIVY Application Component.
5. Beneath this, you see ZIVY_SPER alias ZIVY Sales Person Info Object
6. Beneath this you see a FLAT FILE.
7. Select this FLAT FILE, right click the mouse pointer and select the option Create InfoPackage.
8. A window pops up.
i. InfoPackage Description: Info package for ZIVY_SPER_ATTR.
ii. Select ZIVY_SPER_ATTR
iii. Click the CHECK MARK
1.
1. You see a new screen Scheduler (Maintain InfoPackage).
2. Click the tab External Data
i. Name of file: C:\Personal\SAP\MyWork\MyBW\ZIVY_SPER_MASTER.csv
ii. Check the CSV file.
iii. Click the Preview Button.
iv. A window pops up, click the CHECK MARK.
v. You see the data present in the EXCEL File.
1.
1. Click the tab Update
i. Have a look at the entries.
1.
1. Click the tab: Scheduler:
i. Click the button Start
ii. You now click on MONITOR BUTTON present on the tool bar.
iii. Browse the data.
1. Create InfoPackage
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Select the application component you created ZIVY_APPCOMP alias ZIVY Application Component.
5. Beneath this, you see ZIVY_SPER alias ZIVY Sales Person Info Object
6. Beneath this you see a FLAT FILE.
7. Select this FLAT FILE, right click the mouse pointer and select the option Create InfoPackage.
8. A window pops up.
i. InfoPackage Description: Info package for ZIVY_SPER_TEXT.
ii. Select ZIVY_SPER_TEXT
iii. Click the CHECK MARK
1.
1. You see a new screen Scheduler (Maintain InfoPackage).
2. Click the tab External Data
i. Name of file: C:\Personal\SAP\MyWork\MyBW\ZIVY_SPER_TEXT.csv
ii. Check the CSV file.
iii. Click the Preview Button.
iv. A window pops up, click the CHECK MARK.
v. You see the data present in the EXCEL File.
1.
1. Click the tab Update
i. Have a look at the entries.
1.
1. Click the tab: Scheduler:
i. Click the button Start
ii. You now click on MONITOR BUTTON present on the tool bar.
iii.
Browse the data.
1. Creation of InfoObject Catalog with Key Figures:
1. Select the InfoArea just created ZIVY_Iarea.
2. Right click the mouse pointer and select the option Create InfoObject Catalog
3. A dialog box pops up.
4. Give the InfoObjCat = ZIVY_KEYCAT
i. Description = ZIVY Key Figures Catalog
ii. InfoObjectType: Check the Key Figures.
iii. Now at the bottom of this dialog box you see an icon called CREATE. Click this icon.
1.
1. The next screen in front of you is the Edit InfoObject Catalog.
2. Simply click the activate icon present on the Application Toolbar.
2. Create InfoObject :
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_KEYCAT,which is ZIVY Key Figures Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_AMT and
i. Description ZIVY Amount Info Object
ii. Click the TICK mark.
1.
1. The next screen you see is Create Key Figure ZIVY_AMT: Detail.
2. In this screen the following fields have to be modified:
i. In the Type/ Unit Tab
1. DataType: Amount
2. Unit/ Currency = 0Currency
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the ZIVY_AMT, by clicking the icon ACTIVATE.
2. Create InfoObject :
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. -
Load data from XML files into BI
Hi All,
Can any one guide me through the steps which involve in loading data from XML files into BI?
Thanks
SantoshHi James,
I have followed upto step No: 12 .
Please could you let me know how to link the XML file on my local drive to BI,
I am not able to find figure out where to specify the path of the XML file to be loaded into BI.
Thanks In Advance
Regards,
San
1. Create a Infosource(ZIS), with transfer structure in accordance with the structure in the XML file. (You can open the XML file with MS Excel.This way you can get to know the structure).
2. Activate the transfer rules.
3. After activation ;from the Menu Bar , Select Extras>Create BW Datasource with SOAP connection.
4.Now Activate the Infosurce again, this creates an XML based Datasource(6AXXX...)
5.These steps would create two sub nodes under the Infosource(ZIS).
6.Select Myself system and create a data package and execute it run in Init mode(without Data Transfer).
7. This would create an entry in RSA7(BW delta Queue)
8. Again create another Delta Infopackage under it, and run it. Now the Datasource(6AXXXXXX..) would turn green in RSA7.
9.In Function builder(SE37) select your FM( do a search ,F4, on the datasource 6AXXX....) .
10.Inside this RFC based FM , from the Menu Bar select Utilities>more Utilities>Create Web services>From Function module.
11.A wizard will guide you through the next steps .
12.once this is done a Web serrvice would be enabled in WSADMIN. Select your FM and execute it.
13.From here you can upload the data from XML file into BW delta queue.
Edited by: Santosh on Nov 30, 2008 2:22 PM -
Loading data from flat file to infocube
hi,can any one give me the steps invovled in loading data from flatfile to info cube in an elegant way
hi,
data loading in BI 7.0 from fla file means
fisrt create one Cube or DSO with the same structure which you have in flatfile..and activate it.. ->now comes to Datasource tab> create one Datasource here you need to select type of data for example..
select Transactional data --> and menntion your flatfile name in extraction tab- and file type and eneter your info object names in FIELDS tab -->
and load preview data Activate it..
now select your datasource and create info package and schedule it..
now your data will loded in to PSA level...----> and now comes to info provider select your cube.. and right clcik it..
and create transformations.,. and activate it..----> and create DTP -- Activate it.. and Execute it..
1)Create datasource. Here u can set/check the Soucre System fields.
2)Create Transformation for that datasource. (no more update rules/transfer rules)
2.1) While creating transformation for DS it will ask you for data target name, so just assign where u want to update ur data.
DataSource -> Transformation -> (DTP)-->Data TargetNow if you want to load data into data target from Source System Datasource:
1) Create infopackage for that data source. If you are creating infopackage for new datasources, it will only allow you update upto PSA, all other options u can see as disabled.
2)Now Create DTP (Data Transfer Process) for that data source.
3) NOw schdule the Infopackage, once the data is loaded to PSA, you can execute your DTP which will load data to data target.
Data Transfer Process (DTP) is now used to load data using the dataflow created by the Transformation.
Here's how the DTP data load works:
1) Load InfoPackage
2) Data gets loaded into PSA (hence why PSA only is selected)
3) DTP gets "executed"
4) Data gets loaded from PSA into the data target once the DTP has executed
if helpful provide points
regards
harikrishna N -
Problem in loading data from flat file to info object
Hi experts,
I am new on bw. I am trying to load data from .csv file to info object. CSV file contains two colums Mat No, Mat Name and are separated by comma and similarly Mat Name is attribute of Mat No in info object. I am doing all steps by following the book but whenever I load data into info object it is loaded in one column. I mean both Mat no and Mat name apears in Mat No column whereas Mat Name column appears empty in info object. I have changed exel file into .csv. Any one can help me sort it out.
regardsHi,
your flatfile should be in the form of csv ie it does not mean that in a word u seperate it with coma
create an excel file and say save as in teh file name give the name of your flatfile and in the save as type select CSV(comma delimited) from the drop down list
and then in this file enter the data as u fill in excel sheet.
After closing the file right click it and say open with wordpad then the data should appear seperated with a comma.
Try this and then revert back in case of any doubts.........
Are u loading data into BI 7.0 or 3.x
Regards
Madhavi -
Hello, i'm building my first pdf with Adobe Designer, in order to include dynamic documents to our existing application.
My purpose is to load data from a url.
My iis webserver show me an xml contaning user informations, grace to the windows integrated authentication.
Here is an example node :
I would like to load these informations in my dynamic pdf document, in order to auto-fill administrative documents for printing.
Any idea or suggestion ?
Best RegardsHello,
try the following:
http://sourceforge.net/projects/csvjdbc/
or this one:
https://xlsql.dev.java.net/
Istvan -
Unable to load data from an ODS to a Cube
Hi all,
I am traying to load data from an ODS to a cube, and I'm getting the following msg at the bottom of the screen monitor: <b>"No corresponding requests were found for request REQU_BZUH9ZPYNL5XLQNB7K8IQDKFS in the ODS/Cube" Message no. RSBM043.</b>
I am unable to load the data. The QM status is yellow. When the process starts, on the left hand of the monitor it shows: "0 of 84408 records" which is ok. I load that with this package before and it works well.
Can you help me what I have to do? I tried to wait but it was the same: no progress and no data in the cube.
Thank you very much and kind regards,
MM.
May be this helps...
When I look at the status, it says that I have a short dump at BW. It was CALL_FUNCTION_REMOTE_ERROR and the short text is "The function module "SUBST_TRANSFER_UPGEVAL" cannot be used for 'remote'". This short dump occurs very much before I shoot the upload.
Thanks again.Hello MM,
Can you do the following..
make the Total status Red Delete the request from cube.
goto ODS -> Remove the Data Mart Status -> Try loading it again.
The error message that you get is common when we are trying to run a infopackage with the source object having no new request, (means all the requests available in the source are already moved to the targets). So please try the steps given above.
Hope it will help! -
To load data from a cube in SCM(APO) system to a cube in BI system.
Experts,
Please let me know whether it is possible to load data from a cube in SCM(APO) system to a cube in BI system.If so explain the steps to perform.
Thanks,
MeeraHi,
Think in this way,
To load the data fro any source we need datasource Ok. You can genare Export data source for Cube in APO, then use that datasource for BW extraction, try like this. I think it will work, in my case I'm directly loading data from APO to BW using the DataSource sthat are genaraed on Planning Area.
Why you need to take data from APO cube?. Is there any condition for that?. If it is not mandatory, you can use the dame datasource and load the data to BW, if they have any conditions while loading the data from APO to APO cube, they you try check wherther it is possible in BW or not. If possible then you use DataSource and do the same calculation in BW directly.
Thanks
Reddy -
ERROR : "Exceptions in Substep: Rules" while loading data from DSO to CUBE
Hi All,
I have a scenario like this.
I was loading data from ODS to cube daily. everything was working fine till 2 days before. i added some characteristic fields in my cube while i didn't do any change in my key figures. now i started reloading of data from ODS to cubes. i got the following error "Exceptions in Substep: Rules" after some package of data loaded successfully.
I deleted the added fields from the infocube and then i tried toreload data again but i am facing the same error again "Exceptions in Substep: Rules".
Can any one tell me how to come out from this situation ?
Regards,
Komik ShahDear,
Check some related SDN posts:
zDSo Loading Problem
Re: Regarding Data load in cube
Re: Regarding Data load in cube
Re: Error : Exceptions in Substep: Rules
Regards,
Syed Hussain. -
Unable to load data from DSO to Cube
Good morning all,
I was trying to load data from DSO to Cube for validation. Before loading the new data, I deleted all from DSO and Cube. They contain no request at all. Cube has "Delta Update". First DSO was loaded 138,300 records successfully. Then Activated the DSO. The last when I clicked Exectue (DSO --> Cube), it loaded 0 record. I was able to load the data yesterday. What might be the reasons for this situation?
Thank you so much!Hi BI User,
For loading delta upload into the data target, there should be an initialization request in the data target with same selection criteria.
So..first do the initialization and perform delta upload into the cube.
Regards,
Subhashini. -
DTP load data from DSO to CUBE can't debug
Hi,all expert.
I met a problem yestoday.
When I load data from datasource to DSO,and debug the start routine,it was ok.But when I load data from DSO to CUBE,and debug the routine,it got an error like this:
inconsistent input parameter(parameter:<unknow>,value <unknown>)
message no: RS_EXCEPTION 101.
I don't know why,PLZ help me,thank you very much.Hi,
An alternative way to do this is to have a small code for infinite loop in your start routine. And when you start the load goto SM50 and debug the process which is executing the load, from there you can close the infinite loop and carry on with the debugging. Please let me know if you require further information.
Thanks,
Arminder
Maybe you are looking for
-
Can I use one Adobe ID for two separate CC Teams?
I recently got a new job, and am still doing freelance work for my past employer, who will continue to keep me as a seat in their CC membership (CC for Teams). At my new job, they are in the process of switching over to CC. Will I have to obtain an
-
hiiiiiiiiiiiii alllllll, i want to create a view when i press buton on form. plz tell me it is possible. Regards Tayyab
-
USB 3.0 not detected in HP Pavilion H8-1030NL
I have a HP Pavilion H8-1030NL desktop, in which the two usb 3.0 are no longer detected after installing windows 7 ( instead of 8, that was supplied with the PC ). I checked and could not find the TI update that is mentioned on the forum, so that i
-
Ho to get file name and full path of a local file
I want to be able to get the file name and it's full path of a local file. I was thinking of using "FileReference" but FileReference doesn't permint accessing the local file path. Can anyone suggest a way of doing this. Thanks
-
Using m4a files with window moviemaker
i'm new to itunes. I'm trying to use m4a audio files with windows moviemaker but could not. is there a way to change file ext or to download in mp3 form? thanks