Loading data from R/3 to infoobject

Dear All
I am very new to BI . I want to see 0RTYPE infoobject in BEX for currency translation . As of now I can this only in Infoobject tree . To make it avialble for query level how should I go about . Please give me step by step approach .
Thank you

hi,
   to include  0RTYPE in ur curerncy translation type go to
tcode :RSCUR
specify the IO as 0rtype.
create a dummy query on rtype and create a variable on it and include in 'exchage rate from variable' in RSCUR.
NOW WHEN U EXECUTE THE QUERY it will ask for 0rtype
regards
pls assign points if helpful.

Similar Messages

  • Problem while loading data from ODS to infoobject

    Hi guys,
    I am facing problem while loading data from <b>ODS to infoobject</b>.
    If I load data via PSA it works fine but
    if I load data without PSA its giving error as Duplicate records.
    Do u have any idea why it is so.
    Thanks in advance
    savio

    Hi,
    when you load the data via the PSA, what did you select? Serial or Paralel?
    If you select serial most likely you don't have duplicates within the same datapackage and your load can go through.
    Loading directly in the IObj will happen thefore if you have the same key in two different packages, the "duplicate records" will be raised; you can perhaps flag your IPack with the option "ignore duplicate records" as suggested...
    hope this helps...
    Olivier.

  • Error in loading data from PSA to masterdataTables by using ProcessManually

    Hello,
    While loading Attribute master data to Masterdata tables, the data is loaded successfully to PSA but when I clicked process manually tab in the monitor screen to load the Attribute master data to Masterdata tables it is showing error.
    Can anyone pls help me in solving this issue.
    Thanks,
    Soujanya

    Hi Soujanya,
    If it is a SAP BI 7 data flow, in order to load data from PSA to the InfoObject master data tables, you have to run the corresponding DTP.
    On the other hand, if it is a SAP BW 3.x data flow, the InfoPackage should be configured so as to update data to subsequent targets (that is to say, the InfoObject).
    Finally, take into account that if the DataSource provides duplicate records, the DTP or the InfoPackage (depending on the dataflow version) should be configured in order to deal with it.  Otherwise, you could receive error messages during data load.
    I hope this helps you.
    Regards,
    Maximiliano

  • How to load data from PSA in BI 7.0

    Hi,
    Gurus
    I'm trying to load data from PSA to my InfoObject masterdata but I can't get the change mode, so I change the processing to data Target.Right now its on PSA only
    I will reward poaints
    Regards
    Alex

    Hi,
      I am just a beginner in 7.0, i had the same issue I loaded the master data in PSA but couldn't load in Data target i.e. info object (correct me if my understanding of your problem is wrong).
    Try these steps:
    1) Create and activate Transformation.
    2) Create and activate DTP first then in DTP itself in <b>Execute tab</b> click "execute" ,go to infoobject right click on the info object you have created and select "maintain info object" , the datas will be loaded into info object
    *Please assign points if useful.

  • How load data from One Infoobject to Another Infoobject?

    Hi GuRUS
    Any body has succeded in loading data from One Infoobject to Another Infoobject?
    Pls Let me kNow
    Regards
    Durai

    Hi Durai,
    Create export datasource on the info-object and then load the data to the other info-object.
    Check this link also:
    Re: How load data from Infoobject to another Infoobject?
    Bye
    Dinesh

  • Data load failed while loading data from one DSO to another DSO..

    Hi,
    On SID generation data load failed while loading data  from Source DSO to Target DSO.
    Following are the error which is occuuring--
    Value "External Ref # 2421-0625511EXP  " (HEX 450078007400650072006E0061006C0020005200650066
    Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0BBP
    So, i'm  not getting  WHY in one DSO i.e Source  it got successful but in another DSO i.e. Target its got failed??
    While analyzing all i check that SIDs Generation upon Activation is ckecked in source DSO but not in Target DSO..so it is reason its got failed??
    Please explain..
    Thanks,
    Sneha

    Hi,
    I hope your data flow has been designed in such a way where the 1st DSO as a staging Device and all transformation rules and routine are maintained in between 1st to 2nd dso and sid generation upon activation maintained in 2nd DSO.  By doing so you will be getting your data 1st DSO same as your source system data since you are not doing any transformation rules and routine etc.. which helps to avoid data load failure.  
    Please analyze the following
    Have you loaded masterdata before transaction data ... if no please do it first
    go to the property of first dso and check whether there maintained sid generation up on activation (it may not be maintained I guess)
    Goto the property of 2nd Dso and check whether there maintained sid generation up on activation (It may be maintained I hope)
    this may be the reason.
    Also check whether there is any special char involvement in your transaction data (even lower case letter)
    Regards
    BVR

  • Error while loading data from application server

    Hi all,
    Am facing a problem while loading data from application server.
    The error i get is ....
    *" The argument ' Rental/Lease ' cannot be interpreted as a number while assigning character to application structure*.
    'Rental/Lease' is a value for a character infoobject length 30. I checked for the sequence of fields in data source and the sequnce of values am receiving in application server and the sequence match.
    when i copy these values into a CSV onto a desktop and load,load is successful.
    Please let me know your views.
    Thanks&Regards,
    Praveen

    It looks like the system is trying to convert Rental/Lease to a number format.   Is the info object type CHAR or NUMC or ???  I would look there.
    Also, make  sure / is in RSKC.
    Brian

  • Error when i am loading data from PSA to ODS

    hai Gurus
    Very good morning
    Actually i am loading data from PSA to ODS.
    But when i am loading data i am getting the error InfoObject/BIC/0REFER_DOC does not contain ALPHA -CONFORMING VALUE 0.
    Can anybody help me to solve the problem and reload the data
    Thanks & Regards
    Jayavardhan

    Hi,
    Lacs of postings are there in this forum on this topic. Searching teh forum is the best option  for u now.
    With rgds,
    Anil Kumar Sharma .P

  • Help needed in loading data from BW(200) to APO(100).

    Hi everybody,
    I am trying to load a master data from BW(200) to AP1(100) , this is what i did.
    1) created a InfoObject, with some fields (general-ebeln, Attributes- bukrs, werks,matnr).
    2) created and activated communication structure.
    3) Then went to BW(200) created data source(sbiw) and extracted datas from a particular info object, which had same fields and saved it, then went to RSA3 checked for data availability in data source , and it was available there too.
    4) Came back to AP1(100), in the source system tab, opened BW(200) and replicated the datas. I was able to see the Data source name which is created in BW(200).
    5) Create and activated the Transfer struct.
    6) created a info package, and loaded the data, but the monitor says " NOT YET COMPLEATED" , "CURRENTLY IN PROCESS". and it also shows "0 of 0 RECORDS".
    I want to know,
    1) Is there any mistake in what i have done above ?
    2) how long will it take to complete the process (i.e. the loading) ?.
    Please help me through this problem.
    Thanks,
    Ranjani.

    Hi,
    I am surprised with your steps. In APO, you want to load data from a particular infoobject from BW. Why did you create a specific extractor in SBIW???
    You have just reinvented the wheel... It reminds me some people in the world ...
    Here is what you should do:
    - in BW, at the infosource level, you create a direct infosource based on the infoobject that you want to extract the data to APO (let's say 0MATERIAL)
    - in BW, at the infosource level, you right click on the infosource itself and you choose 'GENERATE EXPORT DATASOURCE. That will create the datasources for you (attributes, texts, hierarchies) depending on the infoobject settings. The names of these datasources will begin with a 8 for the datamart
    - in APO, you replicate the BW system. Now you find the datasources 80MATERIAL something
    - in APO, you create the transfer rules to your infosource and you can load
    Just give it a try
    Regards

  • How to edit data while loading data from W/O to Standard DSO?

    Hello,
    I am loading data from W/O to Standard DSO, during activation it got error out due to SID failure error for one infoobject(error is due to lowercase letter).But i can't change the infoobject setting and transformation.
    Is there any way to edit the data(either in W/O DSO or in new data of Standard DSO)?
    Thanks and regards,
    Himanshu.

    HI,
    Please check what is setting there in the transaction RSKC if it is set as ALL_CAPITAL then you must atleast chage the charecter setting, write a command in transformation, load to PSA and modify (Not applicable for BI7), Remove the setting in RSKC.(Not suggested).
    Cheers
    Vikram

  • How to load data from info object to ODS

    Hello BW Gurus,
    Is their any way to load data from info object to ODS and I am unable to fine the Info source for that particulate info object master data.
    For ex: we have 0PROFITCENTER as info object which is getting loaded everyday. We want same data in ODS too but I don't find any info source related to this info object to create update ruled.
    Please advise me how to proceed with this,
    Thanks,
    Swathi.

    hi Swathi,
    as mentioned, if you just need the master data text or attribute update, then it's sufficient to load 0PROFITCENTER master data. (don't forget to 'apply hierarchy/attribute change' - rsa1->tools)
    if you are going to update attribute in ods with attribute from 0PROFITCENTER, you can choose look up master data attribute method in update rules.
    if the requirement is really need 0PROFITCENTER to assign to update rules, then first you have to 'generate export datasource' for infoobject 0PROFITCENTER, right click the infoobject and 'generate export datasource', then do 'replicate datasource' from bw myself, after that it will available. to display it you may go to rsa1->infosource, and menu settings->display generated objects.
    hope this helps.

  • Step by Step details on how to load data from a flat file

    hi can anyone explain how to load data from a flat file. Pls giv me step by step details. thnx

    hi sonam.
    it is very easy to load data from flat file. whn compared with other extrations methods...
    here r the step to load transation data from a flat file.......
    step:1 create a Flat File.
    step:2 log on to sap bw (t.code : rsa1 or rsa13).
    and observe the flat file source system icon. i.e pc icon.
    step:3 create required info objects.
    3.1: create infoarea
         (infoObjects Under Modeling > infoObjects (root node)-> context menu -
    > create infoarea).
    3.2:  create char /keyfig infoObject Catalog.(select infoArea ---.context menu --->create infoObject catalog).
    3.3:   create char.. infoObj and keyFig infoObjects accourding to ur requirement and activate them.
    step:4 create infoSource for transaction data and create transfer structure and maintain communication structure...
        4.1: first create a application component.(select InfoSources Under modeling-->infosources<root node>>context menu-->create  applic...component)
       4.2: create infoSource  for transation data(select appl..comp--.context menu-->create infosource)
    >select O flexible update and give info source name..
    >continue..
    4.4: *IMp* ASSIGN DATASOURCE..
      (EXPAND APPLIC ..COMP..>EXPAND YOUR INFOSOURCE>CONTEXT MENU>ASSIGN DATASOURCE.)
    >* DATASOURCE *
    >O SOURCE SYSTEM: <BROWSE AND CHOOSE YOUR FLAT FILE SOURCE SYSTEM>.(EX:PC ICON).
    >CONTINUE.
    4.5: DEFINE DATASOURCE/TRANSFER STRUCTURE  FOR IN FOSOURCE..
    > SELECT TRANSFER STRUCTURE TAB.
    >FILL THE INFOOBJECT FILLED WITH THE NECESSARY  INFOOBJ IN THE ORDER OR SEQUENCE OF FLAT FILE STRUCTURE.
    4.6: ASSIGN TRANSFER RULES.
    ---> NOW SELECT TRANSFER RULES TAB. AND SELECT PROPOSE TRANSFER RULES SPINDLE LIKE ICON.
    (IF DATA TARGET IS ODS -
    INCLUDE 0RECORDMODE IN COMMUNICATION STRUCTURE.)
    --->ACTIVATE...
    STEP:5  CREATE DATATARGET.(INFOCUBE/ODS OBJECT).
    5.1: CREATE INFO CUBE.
    -->SELECT YOUR INFOAREA>CONTEXT MENU>CREATE INFOCUBE.
    5.2: CREATE INFOCUBE STRUCTURE.
    ---> FILL THE STRUCTURE PANE WILL REQUIRE INFOOBJECTS...(SELECT INFOSOURCE ICON>FIND UR INFOSOURCE >DOUBLE CLICK > SELECT "YES" FOR INFOOBJECT ASSIGNMENT ).
    >MAINTAIN ATLEAST  ON TIME CHAR.......(EX; 0CALDAY).
    5.3:DEFINE AND ASSIGN DIMENSIONS FOR YOUR CHARACTERISTICS..
    >ACTIVATE..
    STEP:6 CREATE UPDATE RULES FOR INFOCUDE USING INFOSOURCE .
    >SELECT UR INFOCUBE >CONTEXT MENU> CREATE UPDATE RULES.
    > DATASOURCE
    > O INFOSOURCE : _________(U R INFOSOURCE). AND PRESS ENTER KEY.......
    >ACTIVATE.....UR UPDATE RULES....
    >>>>SEE THE DATA FLOW <<<<<<<<----
    STEP:7  SCHEDULE / LOAD DATA..
    7.1 CREATE INFOPACKAGE.
    --->SELECT INFOSOURCE UNDER MODELING> EXPAND UR APPLIC.. COMP..> EXPAND UR INFOSOURCE..> SELECT UR DATASOURCE ASSIGN MENT ICON....>CONTEXT MENU> CREAE INFOPACKAGE..
    >GIVE INFOPACKAGE DISCREPTION............_________
    >SELECT YOUR DATA SOURCE.-------> AND PRESS CONTINUE .....
    >SELECT EXTERNAL DATA TAB...
    > SELECT *CLIENT WORKSTATION oR APPLI SERVER  >GIVE FILE NAME > FILE TYPE> DATA SAPARATER>
    >SELECT PROCESSING TAB
    > PSA AND THEN INTO DATATARGETS....
    >DATATARGET TAB.
    >O SELECT DATA TARGETS
    [ ] UPDATE DATATARGET CHECK BOX.....
    --->UPDATE TAB.
    O FULL UPDATE...
    >SCHEDULE TAB..
    >SELECT O START DATA LOAD IMMEDIATELY...
    AND SELECT  "START" BUTTON........
    >>>>>>>>>>
    STEP:8 MONITOR DATA
    > CHECK DATA IN PSA
    CHECK DATA IN DATA TARGETS.....
    >>>>>>>>>>> <<<<<<<<<----
    I HOPE THIS LL HELP YOU.....

  • Help - Step by Step Material on How to load Data from flatfile to BI 7.0

    Hi BI Experts,
    Can any one send the document or a pdf file on how to load data from flat file to BI 7.0 in step by step process.
    Thanks in Advance
    Regards
    Ramakrishna Kamurthy
    +91-9963101073

    1.     On log on you will be placed in the SAP Easy Access Strategic Management/ Business Analytics
    1.     You see the screen divided in two segments.
    2.     Follow the left segment.
    3.     Click on the Business Information Warehouse.
    4.     Sub Menu &#61664; BW Administration.
    5.     You find various entries in it.
    6.     Now double click on UG_BW_RSA1-Administrator Workbench
    2.     Creation of Info Area
    1.     Click on InfoObjects.
    2.     Now in the right hand side screen select the InfoObjects (First item on the top). Right click the mouse and select Create InfoArea.
    3.     A dialog box pops up.
    4.     Give the InfoArea as ZIVY_Iarea.
    5.     Give the Long Description as ZIVY Info Area.
    3.     Create a Catalog:
    1.     Select the InfoArea just created “ZIVY_Iarea”.
    2.     Right click the mouse pointer and select the option “Create InfoObject Catalog” 
    3.     A dialog box pops up.
    4.     Give the InfoObjCat = ZIVY_CHCAT
                                                                  i.      Description = “ZIVY Character Catalog”
                                                                 ii.      InfoObjectType: Check the Character. ( As we are creating the master data, check the Character)
                                                                iii.      Now at the bottom of this dialog box you see an icon called “CREATE”. Click this icon.
    1.      
    1.     The next screen in front of you is the “Edit InfoObject Catalog”.
    2.     Simply click the “activate” icon present on the Application Toolbar.
    2.     Create InfoObject :
    1.     Go to the UG_BW_RSA1-Administrator Workbench.
    2.     Click on InfoObjects.
    3.     Look for the InfoArea you created “ZIVY_Iarea”.
    4.     Select the catalog you created “ZIVY_CHCAT”,which is ZIVY  Character Catalog.
    5.     Right click your mouse pointer, and select Create InfoObject.
    6.     A dialog box pops up.
    7.     Give the Character &#61664;ZIVY_CUST and
                                                                   i.      Description&#61664; Customer Info Object
                                                                 ii.      Click the TICK mark.
    1.      
    1.     The next screen you see is “Change Characteristic ZIVY_CUST: Detail”.
    2.     In this screen the following fields have to be modified:
                                                                   i.      In the General Tab
    1.      DataType: CHAR
    2.      Length: 10
                                                                 ii.      In the Master Data/ Texts Tab:
    1.      Check the “With Master Data” and “With Texts”.
    2.      Use suitable formats in the fields.
                                                                iii.      In the Hierarchy Tab:
    1.      Uncheck the “With Hierarchies”.
                                                               iv.      In the Attributes Tab:
    1.      We need to create the Attribute InfoObjects. These could be done directly from here or even from the RSA1 &#61664; InfoObject &#61664; ZIVY_Iarea&#61664;ZIVY_CHCAT. This will be delt in the forth coming steps (STEP  .
    1.      
    1.     Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
    2.     Activate the ZIVY_CUST, by clicking the icon “ACTIVATE”
    2.     Creation of InfoObject: ZIVY_CITY
    1.     Go to the UG_BW_RSA1-Administrator Workbench.
    2.     Click on InfoObjects.
    3.     Look for the InfoArea you created “ZIVY_Iarea”.
    4.     Select the catalog you created “ZIVY_CHCAT”,which is ZIVY  Character Catalog.
    5.     Right click your mouse pointer, and select Create InfoObject.
    6.     A dialog box pops up.
    7.     Give the Character &#61664;ZIVY_CITY and
                                                                   i.     
    Description&#61664;
    Customer
    City Name.
                                                                 ii.      Click the TICK mark.
    1.      
    1.     The next screen you see is “Change Characteristic ZIVY_CITY: Detail”.
    2.     In this screen the following fields have to be modified:
                                                                   i.      In the General Tab
    1.      DataType: CHAR
    2.      Length: 25
                                                                 ii.      In the Master Data/ Texts Tab:
    1.      Uncheck the “With Master Data” and “With Texts”.
                                                                iii.      In the Hierarchy Tab:
    1.      Uncheck the “With Hierarchies”.
    1.      
    1.     Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
    2.     Activate the InfoObject ZIVY_CITY, by clicking the icon ACTIVATE.
    2.     Creation of InfoObject: ZIVY_STATE
    1.     Go to the UG_BW_RSA1-Administrator Workbench.
    2.     Click on InfoObjects.
    3.     Look for the InfoArea you created “ZIVY_Iarea”.
    4.     Select the catalog you created “ZIVY_CHCAT”,which is ZIVY  Character Catalog.
    5.     Right click your mouse pointer, and select Create InfoObject.
    6.     A dialog box pops up.
    7.     Give the Character &#61664;ZIVY_STATE and
                                                                   i.     
    Description&#61664;
    Customer
    State Name.
                                                                 ii.      Click the TICK mark.
    1.      
    1.     The next screen you see is “Change Characteristic ZIVY_STATE: Detail”.
    2.     In this screen the following fields have to be modified:
                                                                   i.      In the General Tab
    1.      DataType: CHAR
    2.      Length: 25
                                                                 ii.      In the Master Data/ Texts Tab:
    1.      Uncheck the “With Master Data” and “With Texts”.
                                                                iii.      In the Hierarchy Tab:
    1.      Uncheck the “With Hierarchies”.
    1.      
    1.     Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
    2.     Activate the InfoObject ZIVY_STATE, by clicking the icon ACTIVATE.
    2.     Creation of InfoObject: ZIVY_CTRY
    1.     Go to the UG_BW_RSA1-Administrator Workbench.
    2.     Click on InfoObjects.
    3.     Look for the InfoArea you created “ZIVY_Iarea”.
    4.     Select the catalog you created “ZIVY_CHCAT”,which is ZIVY  Character Catalog.
    5.     Right click your mouse pointer, and select Create InfoObject.
    6.     A dialog box pops up.
    7.     Give the Character &#61664;ZIVY_CTRY and
                                                                   i.      Description&#61664; Customer Country Name.
                                                                 ii.      Click the TICK mark.
    1.      
    1.     The next screen you see is “Change Characteristic ZIVY_CTRY: Detail”.
    2.     In this screen the following fields have to be modified:
                                                                   i.      In the General Tab
    1.      DataType: CHAR
    2.      Length: 10
                                                                 ii.      In the Master Data/ Texts Tab:
    1.      Uncheck the “With Master Data”
    2.      Check the “With Texts” and make suitable Text Table Properties.
                                                                iii.      In the Hierarchy Tab:
    1.      Uncheck the “With Hierarchies”.
    1.      
    1.     Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
    2.     Activate the InfoObject ZIVY_CTRY, by clicking the icon ACTIVATE.
    1.     Creation of  Attributes and InfoObject from the ZIVY_CUST InfoObject:
    1.     Go to the UG_BW_RSA1-Administrator Workbench.
    2.     Click on InfoObjects.
    3.     Look for the InfoArea you created “ZIVY_Iarea”.
    4.     Select the catalog you created “ZIVY_CHCAT”,which is ZIVY  Character Catalog.
    5.     In this ZIVY_CHCAT, you see the InfoObject ZIVY_CUST. Double click the InfoObject ZIVY_CUST.
    6.     You find the screen “Change Characteristic ZIVY_CUST:Detail”.
    7.     Click on the tab “Attributes”
    8.     In the Character Attribute Box, type ZIVY_CITY and enter the ENTER KEY.
    9.     You see the relevant information regarding this being inserted.
    10.     Similarly, type ZIVY_STATE, ZIVY_CTRY.
    11.     Now, we will create another InfoObject ZIVY_TEL, from here.
    12.     So type ZIVY_Tel and enter the ENTER KEY.
    13.     A dialog box pops up, and request you “If you want to Create an InfoObject”
    14.     Select “ Create Attribute As Characteristic” and click the check mark.
    15.     Another window pops up. Give the following:
                                                                   i.      In the General Tab:
    1.      Long Description: ZIVY Telephone Number
    2.      Short Description: ZIVY Telephone Number
    3.      DataType : NUMC
    4.      Length : 10
    5.      Uncheck Attribute Only
                                                                 ii.      In the Master Data/ Texts Tab:
    1.      Uncheck the “With Master Data” and “With Texts”.
                                                                iii.      In the Hierarchy Tab:
    1.      Uncheck the “With Hierarchies”
                                                               iv.      Now click the “TICK MARK”
    1.      
    1.     Click the “ACTIVATE”
    2.     A window pops up.
                                                                   i.      Select “activate dependent InfoObjects.
                                                                 ii.      Click the Check Mark.
    1.     Creation of InfoObject: ZIVY_DATE
    1.     Go to the UG_BW_RSA1-Administrator Workbench.
    2.     Click on InfoObjects.
    3.     Look for the InfoArea you created “ZIVY_Iarea”.
    4.     Select the catalog you created “ZIVY_CHCAT”,which is ZIVY  Character Catalog.
    5.     Right click your mouse pointer, and select Create InfoObject.
    6.     A dialog box pops up.
    7.     Give the Character &#61664;ZIVY_DATE and
                                                                   i.      Description&#61664; ZIVY Date.
                                                                 ii.      Click the TICK mark.
    1.      
    1.     The next screen you see is “Change Characteristic ZIVY_DATE: Detail”.
    2.     In this screen the following fields have to be modified:
                                                                   i.      In the General Tab
    1.      DataType: DATS
    2.      Length: 8
                                                                 ii.      In the Hierarchy Tab:
    1.      Uncheck the “With Hierarchies”.
    1.      
    1.     Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
    2.     Activate the InfoObject ZIVY_CTRY, by clicking the icon ACTIVATE.
    2.     Create ZIVY Application Component:
    1.     Go to the UG_BW_RSA1-Administrator Workbench.
    2.     Click on InfoSource in the left hand segment.
    3.     In the right hand segment, select InfoSources.
    4.     Right click the mouse pointer and select the entry “Create Application Component”
    5.     A window pops up.
                                                                   i.      Application Component: ZIVY_APPCOMP
                                                                 ii.      Long Description : ZIVY Application Component
                                                                iii.      Click the check mark.
    1.     Create InfoSoure:
    1.     Go to the UG_BW_RSA1-Administrator Workbench.
    2.     Click on InfoSource in the left hand segment.
    3.     In the right hand segment, select InfoSources.
    4.     Select the application component you created “ZIVY_APPCOMP” alias “ZIVY Application Component”.
    5.     Right click the mouse pointer and select the entry “Create InfoSource”
    6.     A window pops up:
                                                                   i.      Select the “Direct Update of Master Data”
                                                                 ii.      InfoObject : ZIVY_CUST
                                                                iii.      Click the CHECK MARK.
    1.      
    1.     Now beneath “ZIVY Application Component” you see the “Customer Info Object”.
    2.     Select the “Customer Info Object” mentioned above.
    3.     Right click the mouse pointer, and select the entry “Assign DataSource”.
    4.     A window pops up.
                                                                   i.      InfoSource: ZIVY_CUST
                                                                 ii.      Source System: FLATFILE
                                                                iii.      Check the TICK MARK.
                                                               iv.      Just click yes for the coming window pop ups.
    1.      
    1.     Key thing
                                                                   i.      Click on the tab “Transfer Rules”
    1.      Have a look at the data mapping here.
    2.      First field is ZIVY_CUST,
    3.      Second field is ZIVY_CITY.
    4.      And so on.
    5.      This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file.                                                            ii.      Click on the tab “DataSource/Transport Structure”1.      This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file.
    2.      If the order is different, just shuffle the rows.
                                                                iii.      Click the “Activate Button”. By clicking the “ACTIVATE BUTTON” you just activated the ZIVY_CUST MASTER DATA.
                                                               iv.      Now in DataSource : select the text.
                                                                 v.      Click on the tab “Transfer Rules”
    1.      Have a look at the data mapping here.
    2.      First Field : 0LANGUAGE
    3.      Second field is ZIVY_CUST,
    4.      Third field is 0TXTMD.
    5.      Click the Transfer Rule adjacent to “0LANGUAGE”
    6.      A window pops up.
    a.       Check the “CONSTANT” and give the value as “EN”
    b.      Click the TICK MARK.
    7.      This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file. Ignore the first field, as it is a constant.                                                          vi.      Click on the tab “DataSource/Transport Structure”1.      This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file.
    2.      If the order is different, just shuffle the rows.
                                                              vii.      Click the “Activate Button”. By clicking the “ACTIVATE.
    1.     Create the DATA required for this MASTER DATA
    1.     Open EXCEL.
    2.     Type the following data:
    1.      
    1.     Save as “ZIVY_CUST_MASTER.CSV”
    2.     The file should be saved in COMMA SEPARATED FORMAT.
    3.     Open EXCEL
    4.     Type the following data:
    5.     Save the file *** “ZIVY_CUST_TEXT.CSV”
    1.     Create InfoPackage
    1.     Go to the UG_BW_RSA1-Administrator Workbench.
    2.     Click on InfoSource in the left hand segment.
    3.     In the right hand segment, select InfoSources.
    4.     Select the application component you created “ZIVY_APPCOMP” alias “ZIVY Application Component”.
    5.     Beneath this, you see “ZIVY_CUST” alias “Customer Info Object”
    6.     Beneath this you see a “FLAT FILE”.
    7.     Select this “FLAT FILE”,  right click the mouse pointer and select the option “Create InfoPackage”.
    8.     A window pops up.
                                                                   i.      InfoPackage Description: Info package for “ZIVY_CUST_ATTR”.
                                                                 ii.      Select “ZIVY_CUST_ATTR”
                                                                iii.      Click the “CHECK MARK”
    1.      
    1.     You see a new screen “Scheduler (Maintain InfoPackage)”.
    2.     Click the tab “External Data”
                                                                   i.      Name of file: C:\Personal\SAP\MyWork\MyBW\ZIVY_CUST_MASTER.csv
                                                                 ii.      Check the CSV file.
                                                                iii.      Click the Preview Button.
                                                               iv.      A window pops up, click the CHECK MARK.
                                                                 v.      You see the data present in the EXCEL File.
    1.      
    1.     Click the tab “Update”
                                                                   i.      Have a look at the entries.
    1.      
    1.     Click the tab: Scheduler:
                                                                   i.      Click the button “Start”
                                                                 ii.      You now click on “MONITOR BUTTON” present on the tool bar.
                                                                iii.      Browse the data.
    1.     Create InfoPackage
    1.     Go to the UG_BW_RSA1-Administrator Workbench.
    2.     Click on InfoSource in the left hand segment.
    3.     In the right hand segment, select InfoSources.
    4.     Select the application component you created “ZIVY_APPCOMP” alias “ZIVY Application Component”.
    5.     Beneath this, you see “ZIVY_CUST” alias “Customer Info Object”
    6.     Beneath this you see a “FLAT FILE”.
    7.     Select this “FLAT FILE”,  right click the mouse pointer and select the option “Create InfoPackage”.
    8.     A window pops up.
                                                                   i.      InfoPackage Description: Info package for “ZIVY_CUST_TEXT”.
                                                                 ii.      Select “ZIVY_CUST_TEXT”
                                                                iii.      Click the “CHECK MARK”
    1.      
    1.     You see a new screen “Scheduler (Maintain InfoPackage)”.
    2.     Click the tab “External Data”
                                                                   i.      Name of file: C:\Personal\SAP\MyWork\MyBW\ZIVY_CUST_TEXT.csv
                                                                 ii.      Check the CSV file.
                                                                iii.      Click the Preview Button.
                                                               iv.      A window pops up, click the CHECK MARK.
                                                                 v.      You see the data present in the EXCEL File.
    1.      
    1.     Click the tab “Update”
                                                                   i.      Have a look at the entries.
    1.      
    1.     Click the tab: Scheduler:
                                                                   i.      Click the button “Start”
                                                                 ii.      You now click on “MONITOR BUTTON” present on the tool bar.
                                                                iii.      Browse the data.         
    1.     Create InfoObject :
    1.     Go to the UG_BW_RSA1-Administrator Workbench.
    2.     Click on InfoObjects.
    3.     Look for the InfoArea you created “ZIVY_Iarea”.
    4.     Select the catalog you created “ZIVY_CHCAT”,which is ZIVY  Character Catalog.
    5.     Right click your mouse pointer, and select Create InfoObject.
    6.     A dialog box pops up.
    7.     Give the Character &#61664;ZIVY_MAT and
                                                                   i.      Description&#61664; ZIVY Material Info Object
                                                                 ii.      Click the TICK mark.
    1.      
    1.     The next screen you see is “Change Characteristic ZIVY_MAT: Detail”.
    2.     In this screen the following fields have to be modified:
                                                                   i.      In the General Tab
    1.      DataType: CHAR
    2.      Length: 10
                                                                 ii.      In the Master Data/ Texts Tab:
    1.      Check the “With Master Data” and “With Texts”.
    2.      Use suitable formats in the fields.
                                                                iii.      In the Hierarchy Tab:
    1.      Uncheck the “With Hierarchies”.
                                                               iv.      In the Attributes Tab:
    1.      We need to create the Attribute InfoObjects. These could be done directly from here or even from the RSA1 &#61664; InfoObject &#61664; ZIVY_Iarea&#61664;ZIVY_CHCAT. This will be delt in the forth coming steps (STEP 17).
    1.      
    1.     Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
    2.     Activate the ZIVY_MAT, by clicking the icon “ACTIVATE”
    2.     Creation of InfoObject: ZIVY_GROUP
    1.     Go to the UG_BW_RSA1-Administrator Workbench.
    2.     Click on InfoObjects.
    3.     Look for the InfoArea you created “ZIVY_Iarea”.
    4.     Select the catalog you created “ZIVY_CHCAT”,which is ZIVY  Character Catalog.
    5.     Right click your mouse pointer, and select Create InfoObject.
    6.     A dialog box pops up.
    7.     Give the Character &#61664;ZIVY_GROUP and
                                                                   i.      Description&#61664; ZIVY Material Group.
                                                                 ii.      Click the TICK mark.
    1.      
    1.     The next screen you see is “Change Characteristic ZIVY_GROUP: Detail”.
    2.     In this screen the following fields have to be modified:
                                                                   i.      In the General Tab
    1.      DataType: CHAR
    2.      Length: 10
                                                                 ii.      In the Master Data/ Texts Tab:
    1.      Uncheck the “With Master Data”
    2.      Check the “With Texts” and make suitable Text Table Properties.
                                                                iii.      In the Hierarchy Tab:
    1.      Uncheck the “With Hierarchies”.
    1.      
    1.     Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
    2.     Activate the InfoObject ZIVY_GROUP, by clicking the icon ACTIVATE.
    2.     Creation of InfoObject: ZIVY_COLOR
    1.     Go to the UG_BW_RSA1-Administrator Workbench.
    2.     Click on InfoObjects.
    3.     Look for the InfoArea you created “ZIVY_Iarea”.
    4.     Select the catalog you created “ZIVY_CHCAT”,which is ZIVY  Character Catalog.
    5.     Right click your mouse pointer, and select Create InfoObject.
    6.     A dialog box pops up.
    7.     Give the Character &#61664;ZIVY_COLOR and
                                                                   i.      Description&#61664; ZIVY Material Color.
                                                                 ii.      Click the TICK mark.
    1.      
    1.     The next screen you see is “Change Characteristic ZIVY_COLOR: Detail”.
    2.     In this screen the following fields have to be modified:
                                                                   i.      In the General Tab
    1.      DataType: CHAR
    2.      Length: 10
                                                                 ii.      In the Master Data/ Texts Tab:
    1.      Uncheck the “With Master Data”  and  “With Texts”.
                                                                iii.      In the Hierarchy Tab:
    1.      Uncheck the “With Hierarchies”.
    1.      
    1.     Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
    2.     Activate the InfoObject ZIVY_COLOR, by clicking the icon ACTIVATE.
    2.     Creation of InfoObject from the ZIVY_MAT InfoObject:
    1.     Go to the UG_BW_RSA1-Administrator Workbench.
    2.     Click on InfoObjects.
    3.     Look for the InfoArea you created “ZIVY_Iarea”.
    4.     Select the catalog you created “ZIVY_CHCAT”,which is ZIVY  Character Catalog.
    5.     In this ZIVY_CHCAT, you see the InfoObject ZIVY_MAT. Double click the InfoObject ZIVY_MAT.
    6.     You find the screen “Change Characteristic ZIVY_MAT:Detail”.
    7.     Click on the tab “Attributes”
    8.     In the Character Attribute Box, type ZIVY_GROUP and enter the ENTER KEY.
    9.     You see the relevant information regarding this being inserted.
    10.     Similarly, type ZIVY_COLOR.
    11.     Click the “ACTIVATE”
    3.     Create InfoSoure:
    1.     Go to the UG_BW_RSA1-Administrator Workbench.
    2.     Click on InfoSource in the left hand segment.
    3.     In the right hand segment, select InfoSources.
    4.     Select the application component you created “ZIVY_APPCOMP” alias “ZIVY Application Component”.
    5.     Right click the mouse pointer and select the entry “Create InfoSource”
    6.     A window pops up:
                                                                   i.      Select the “Direct Update of Master Data”
                                                                 ii.      InfoObject : ZIVY_MAT
                                                                iii.      Click the CHECK MARK.
    1.      
    1.     Now beneath “ZIVY Application Component” you see the “ZIVY Material Info Object”.
    2.     Select the “ZIVY Material  Info Object” mentioned above.
    3.     Right click the mouse pointer, and select the entry “Assign DataSource”.
    4.     A window pops up.
                                                                   i.      InfoSource: ZIVY_MAT
                                                                 ii.      Source System: FLATFILE
                                                                iii.      Check the TICK MARK.
                                                               iv.      Just click yes for the coming window pop ups.
    1.      
    1.     Key thing
                                                                   i.      Click on the tab “Transfer Rules”
    1.      Have a look at the data mapping here.
    2.      First field is ZIVY_MAT,
    3.      Second field is ZIVY_GROUP.
    4.      Third field is ZIVY_COLOR.
    5.      Check the mapping. If you don’t see the mapping.
    6.      Click on the empty row in the group “Assign InfoObjectField”, the box to the right.
    7.      Type ZIVY_GROUP, ZIVY_COLOR.
    8.      Check the transfer rules.
    9.      This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file.                                                            ii.      Click on the tab “DataSource/Transport Structure”1.      This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file.
    2.      If the order is different, just shuffle the rows.
                                                                iii.      Click the “Activate Button”. By clicking the “ACTIVATE BUTTON” you just activated the ZIVY_CUST MASTER DATA.
                                                               iv.      Now in DataSource : select the text.
                                                                 v.      Click on the tab “Transfer Rules”
    1.      Have a look at the data mapping here.
    2.      First Field : 0LANGUAGE
    3.      Second field is ZIVY_MAT,
    4.      Third field is 0TXTSH.
    5.      This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file. Ignore the first field, as it is a constant.                                                          vi.      Click on the tab “DataSource/Transport Structure”1.      This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file.
    2.      If the order is different, just shuffle the rows.
                                                              vii.      Click the “Activate Button”. By clicking the “ACTIVATE.
    1.     Create the DATA required for this MASTER DATA
    1.     Open EXCEL.
    2.     Type the following data:
    1.      
    1.     Save as “ZIVY_Material_MASTER.CSV”
    2.     The file should be saved in COMMA SEPARATED FORMAT.
    3.     Open EXCEL
    4.     Type the following data:
    5.     Save the file *** “ZIVY_Material_TEXT.CSV”
    1.     Create InfoPackage
    1.     Go to the UG_BW_RSA1-Administrator Workbench.
    2.     Click on InfoSource in the left hand segment.
    3.     In the right hand segment, select InfoSources.
    4.     Select the application component you created “ZIVY_APPCOMP” alias “ZIVY Application Component”.
    5.     Beneath this, you see “ZIVY_MAT” alias “ZIVY Material Info Object”
    6.     Beneath this you see a “FLAT FILE”.
    7.     Select this “FLAT FILE”,  right click the mouse pointer and select the option “Create InfoPackage”.
    8.     A window pops up.
                                                                   i.      InfoPackage Description: Info package for “ZIVY_MAT_ATTR”.
                                                                 ii.      Select “ZIVY_MAT_ATTR”
                                                                iii.      Click the “CHECK MARK”
    1.      
    1.     You see a new screen “Scheduler (Maintain InfoPackage)”.
    2.     Click the tab “External Data”
                                                                   i.      Name of file: C:\Personal\SAP\MyWork\MyBW\ZIVY_Material_MASTER.csv
                                                                 ii.      Check the CSV file.
                                                                iii.      Click the Preview Button.
                                                               iv.      A window pops up, click the CHECK MARK.
                                                                 v.      You see the data present in the EXCEL File.
    1.      
    1.     Click the tab “Update”
                                                                   i.      Have a look at the entries.
    1.      
    1.     Click the tab: Scheduler:
                                                                   i.      Click the button “Start”
                                                                 ii.      You now click on “MONITOR BUTTON” present on the tool bar.
                                                                iii.      Browse the data.
    1.     Create InfoPackage
    1.     Go to the UG_BW_RSA1-Administrator Workbench.
    2.     Click on InfoSource in the left hand segment.
    3.     In the right hand segment, select InfoSources.
    4.     Select the application component you created “ZIVY_APPCOMP” alias “ZIVY Application Component”.
    5.     Beneath this, you see “ZIVY_MAT” alias “ZIVY Material Info Object”
    6.     Beneath this you see a “FLAT FILE”.
    7.     Select this “FLAT FILE”,  right click the mouse pointer and select the option “Create InfoPackage”.
    8.     A window pops up.
                                                                   i.      InfoPackage Description: Info package for “ZIVY_MAT_TEXT”.
                                                                 ii.      Select “ZIVY_MAT_TEXT”
                                                                iii.      Click the “CHECK MARK”
    1.      
    1.     You see a new screen “Scheduler (Maintain InfoPackage)”.
    2.     Click the tab “External Data”
                                                                   i.      Name of file: C:\Personal\SAP\MyWork\MyBW\ZIVY_MATERIAL_TEXT.csv
                                                                 ii.      Check the CSV file.
                                                                iii.      Click the Preview Button.
                                                               iv.      A window pops up, click the CHECK MARK.
                                                                 v.      You see the data present in the EXCEL File.
    1.      
    1.     Click the tab “Update”
                                                                   i.      Have a look at the entries.
    1.      
    1.     Click the tab: Scheduler:
                                                                   i.      Click the button “Start”
                                                                 ii.      You now click on “MONITOR BUTTON” present on the tool bar.
                                                                iii.      Browse the data.         
    1.     Create InfoObject :
    1.     Go to the UG_BW_RSA1-Administrator Workbench.
    2.     Click on InfoObjects.
    3.     Look for the InfoArea you created “ZIVY_Iarea”.
    4.     Select the catalog you created “ZIVY_CHCAT”,which is ZIVY  Character Catalog.
    5.     Right click your mouse pointer, and select Create InfoObject.
    6.     A dialog box pops up.
    7.     Give the Character &#61664;ZIVY_SPER and
                                                                   i.      Description&#61664; ZIVY Sales Person Info Object
                                                                 ii.      Click the TICK mark.
    1.      
    1.     The next screen you see is “Change Characteristic ZIVY_SPER: Detail”.
    2.     In this screen the following fields have to be modified:
                                                                   i.      In the General Tab
    1.      DataType: CHAR
    2.      Length: 20
                                                                 ii.      In the Master Data/ Texts Tab:
    1.      Check the “With Master Data” and “With Texts”.
    2.      Use suitable formats in the fields.
                                                                iii.      In the Hierarchy Tab:
    1.      Uncheck the “With Hierarchies”.
                                                               iv.      In the Attributes Tab:
    1.      We need to create the Attribute InfoObjects. These could be done directly from here or even from the RSA1 &#61664; InfoObject &#61664; ZIVY_Iarea&#61664;ZIVY_CHCAT. This will be delt in the forth coming steps (STEP 24).
    1.      
    1.     Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
    2.     Activate the ZIVY_SPER, by clicking the icon “ACTIVATE”
    2.     Creation of InfoObject: ZIVY_SREG
    1.     Go to the UG_BW_RSA1-Administrator Workbench.
    2.     Click on InfoObjects.
    3.     Look for the InfoArea you created “ZIVY_Iarea”.
    4.     Select the catalog you created “ZIVY_CHCAT”,which is ZIVY  Character Catalog.
    5.     Right click your mouse pointer, and select Create InfoObject.
    6.     A dialog box pops up.
    7.     Give the Character &#61664;ZIVY_SREG and
                                                                   i.      Description&#61664; ZIVY Sales Region.
                                                                 ii.      Click the TICK mark.
    1.      
    1.     The next screen you see is “Change Characteristic ZIVY_SREG: Detail”.
    2.     In this screen the following fields have to be modified:
                                                                   i.      In the General Tab
    1.      DataType: CHAR
    2.      Length: 20
                                                                 ii.      In the Master Data/ Texts Tab:
    1.      Check the “With Master Data”  and “With Texts”.
                                                                iii.      In the Hierarchy Tab:
    1.      Uncheck the “With Hierarchies”.
    1.      
    1.     Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
    2.     Activate the InfoObject ZIVY_SREG, by clicking the icon ACTIVATE.
    2.     Creation of Attributes from the ZIVY_SPER InfoObject:
    1.     Go to the UG_BW_RSA1-Administrator Workbench.
    2.     Click on InfoObjects.
    3.     Look for the InfoArea you created “ZIVY_Iarea”.
    4.     Select the catalog you created “ZIVY_CHCAT”,which is ZIVY  Character Catalog.
    5.     In this ZIVY_CHCAT, you see the InfoObject ZIVY_SPER. Double click the InfoObject ZIVY_SPER.
    6.     You find the screen “Change Characteristic ZIVY_SPER:Detail”.
    7.     Click on the tab “Attributes”
    8.     In the Character Attribute Box, type ZIVY_SREG and enter the ENTER KEY.
    9.     You see the relevant information regarding this being inserted.
    10.     Click the “ACTIVATE”
    3.     Create InfoSoure:
    1.     Go to the UG_BW_RSA1-Administrator Workbench.
    2.     Click on InfoSource in the left hand segment.
    3.     In the right hand segment, select InfoSources.
    4.     Select the application component you created “ZIVY_APPCOMP” alias “ZIVY Application Component”.
    5.     Right click the mouse pointer and select the entry “Create InfoSource”
    6.     A window pops up:
                                                                   i.      Select the “Direct Update of Master Data”
                                                                 ii.      InfoObject : ZIVY_SPER
                                                                iii.      Click the CHECK MARK.
    1.      
    1.     Now beneath “ZIVY Application Component” you see the “ZIVY Sales Person Info Object”.
    2.     Select the “ZIVY Sales Person  Info Object” mentioned above.
    3.     Right click the mouse pointer, and select the entry “Assign DataSource”.
    4.     A window pops up.
                                                                   i.      InfoSource: ZIVY_SREP
                                                                 ii.      Source System: FLATFILE
                                                                iii.      Check the TICK MARK.
                                                               iv.      Just click yes for the coming window pop ups.
    1.      
    1.     Key thing
                                                                   i.      Click on the tab “Transfer Rules”
    1.      Have a look at the data mapping here.
    2.      First field is ZIVY_SPER,
    3.      Second field is ZIVY_SREG.
    4.      Check the mapping. If you don’t see the mapping.
    5.      Click on the empty row in the group “Assign InfoObjectField”, the box to the right.
    6.      Check the transfer rules.
    7.      This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file.                                                            ii.      Click on the tab “DataSource/Transport Structure”1.      This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file.
    2.      If the order is different, just shuffle the rows.
                                                                iii.      Click the “Activate Button”. By clicking the “ACTIVATE BUTTON” you just activated the ZIVY_SREP MASTER DATA.
                                                               iv.      Now in DataSource : select the text.
                                                                 v.      Click on the tab “Transfer Rules”
    1.      Have a look at the data mapping here.
    2.      First Field : 0LANGUAGE
    3.      Second field is ZIVY_SPER,
    4.      Third field is 0TXTSH.
    5.      This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file. Ignore the first field, as it is a constant.                                                          vi.      Click on the tab “DataSource/Transport Structure”1.      This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file.
    2.      If the order is different, just shuffle the rows.
                                                              vii.      Click the “Activate Button”. By clicking the “ACTIVATE.
    1.     Create the DATA required for this MASTER DATA
    1.     Open EXCEL.
    2.     Type the following data:
    1.      
    1.     Save as “ZIVY_SREP_MASTER.CSV”
    2.     The file should be saved in COMMA SEPARATED FORMAT.
    3.     Open EXCEL
    4.     Type the following data:
    5.     Save the file *** “ZIVY_SREP_TEXT.CSV”
    1.     Create InfoPackage
    1.     Go to the UG_BW_RSA1-Administrator Workbench.
    2.     Click on InfoSource in the left hand segment.
    3.     In the right hand segment, select InfoSources.
    4.     Select the application component you created “ZIVY_APPCOMP” alias “ZIVY Application Component”.
    5.     Beneath this, you see “ZIVY_SPER” alias “ZIVY Sales Person Info Object”
    6.     Beneath this you see a “FLAT FILE”.
    7.     Select this “FLAT FILE”,  right click the mouse pointer and select the option “Create InfoPackage”.
    8.     A window pops up.
                                                                   i.      InfoPackage Description: Info package for “ZIVY_SPER_ATTR”.
                                                                 ii.      Select “ZIVY_SPER_ATTR”
                                                                iii.      Click the “CHECK MARK”
    1.      
    1.     You see a new screen “Scheduler (Maintain InfoPackage)”.
    2.     Click the tab “External Data”
                                                                   i.      Name of file: C:\Personal\SAP\MyWork\MyBW\ZIVY_SPER_MASTER.csv
                                                                 ii.      Check the CSV file.
                                                                iii.      Click the Preview Button.
                                                               iv.      A window pops up, click the CHECK MARK.
                                                                 v.      You see the data present in the EXCEL File.
    1.      
    1.     Click the tab “Update”
                                                                   i.      Have a look at the entries.
    1.      
    1.     Click the tab: Scheduler:
                                                                   i.      Click the button “Start”
                                                                 ii.      You now click on “MONITOR BUTTON” present on the tool bar.
                                                                iii.      Browse the data.
    1.     Create InfoPackage
    1.     Go to the UG_BW_RSA1-Administrator Workbench.
    2.     Click on InfoSource in the left hand segment.
    3.     In the right hand segment, select InfoSources.
    4.     Select the application component you created “ZIVY_APPCOMP” alias “ZIVY Application Component”.
    5.     Beneath this, you see “ZIVY_SPER” alias “ZIVY Sales Person Info Object”
    6.     Beneath this you see a “FLAT FILE”.
    7.     Select this “FLAT FILE”,  right click the mouse pointer and select the option “Create InfoPackage”.
    8.     A window pops up.
                                                                   i.      InfoPackage Description: Info package for “ZIVY_SPER_TEXT”.
                                                                 ii.      Select “ZIVY_SPER_TEXT”
                                                                iii.      Click the “CHECK MARK”
    1.      
    1.     You see a new screen “Scheduler (Maintain InfoPackage)”.
    2.     Click the tab “External Data”
                                                                   i.      Name of file: C:\Personal\SAP\MyWork\MyBW\ZIVY_SPER_TEXT.csv
                                                                 ii.      Check the CSV file.
                                                                iii.      Click the Preview Button.
                                                               iv.      A window pops up, click the CHECK MARK.
                                                                 v.      You see the data present in the EXCEL File.
    1.      
    1.     Click the tab “Update”
                                                                   i.      Have a look at the entries.
    1.      
    1.     Click the tab: Scheduler:
                                                                   i.      Click the button “Start”
                                                                 ii.      You now click on “MONITOR BUTTON” present on the tool bar.
                                                                iii.     
    Browse the data.         
    1.     Creation of InfoObject Catalog with Key Figures:
    1.     Select the InfoArea just created “ZIVY_Iarea”.
    2.     Right click the mouse pointer and select the option “Create InfoObject Catalog” 
    3.     A dialog box pops up.
    4.     Give the InfoObjCat = ZIVY_KEYCAT
                                                                  i.      Description = “ZIVY Key Figures Catalog”
                                                                 ii.      InfoObjectType: Check the Key Figures.
                                                                iii.       Now at the bottom of this dialog box you see an icon called “CREATE”. Click this icon.
    1.      
    1.     The next screen in front of you is the “Edit InfoObject Catalog”.
    2.     Simply click the “activate” icon present on the Application Toolbar.
    2.     Create InfoObject :
    1.     Go to the UG_BW_RSA1-Administrator Workbench.
    2.     Click on InfoObjects.
    3.     Look for the InfoArea you created “ZIVY_Iarea”.
    4.     Select the catalog you created “ZIVY_KEYCAT”,which is ZIVY  Key Figures Catalog.
    5.     Right click your mouse pointer, and select Create InfoObject.
    6.     A dialog box pops up.
    7.     Give the Character &#61664;ZIVY_AMT and
                                                                   i.      Description&#61664; ZIVY Amount Info Object
                                                                 ii.      Click the TICK mark.
    1.      
    1.     The next screen you see is “Create Key Figure ZIVY_AMT: Detail”.
    2.     In this screen the following fields have to be modified:
                                                                   i.      In the Type/ Unit Tab
    1.      DataType: Amount
    2.      Unit/ Currency = 0Currency
    1.      
    1.     Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
    2.     Activate the ZIVY_AMT, by clicking the icon “ACTIVATE”.
    2.     Create InfoObject :
    1.     Go to the UG_BW_RSA1-Administrator Workbench.
    2.     Click on InfoObjects.
    3. 

  • Is it possible to load data from attribute of I.O. to text of the same I.O.

    Hi guys,
    is it possible to load data from attribute of InfoObject to text of the same InfoObject.
    I have this requierement: the text (description long) of InfoObject should be filled defends on the content of one attribute of this InfoObject.
    Is it possible via Update Rule? (we are using BW3.5)
    And how?
    Thanks in adance!
    Regards

    HI,
    1st) activate your object as data target and do the assignment in the transfer or update rules.
    --- How can I active my InfoObject (Text if the InofoObject)as data target?
    Right Click your info area and choose " Insert characteristics as a Datatarget" and give your info object Id.
    2) create a generic datasource on the p-table of your object and assign that datasource as text datasource to your object.
    --- How can I create a generic datasource on the p-table of your object ?
    For Eg: your info object name is like this
    ZIO_CID
    For this P table will be like this
    /BIC/PZIO_CID
    In RSO2 tcode Generic datasources create datasource based on this table .
    Hope it helps
    Regards,
    Arun.M.D

  • Loading Data From .CSV files

    Hi Gurus,
    I m new to BW
    Can u please help me out solving the below problem
    When i was trying to load data from a flat file (.CSV), which is like this
    Cust no, Cust name, Cust address
    cust001,coca cola, Inc., 17 north road, Hyderabad - 35
    infoObjects are
    ZS_CUST,ZS_CUSTNM,ZS_CUSTAD
    I am getting the first three values, into my attribute table, those seperated by commas
    i.e  cust001, coca cola  and  Inc into three fields in the attribute table (and PSA).
    Now my piont is with out replacing the seperator ',' to any thing else
    (If we have millions of records in the file and assuming that it will be a time consuming process to change ',' to some other seperator) can we extract the complete data into the fields in attribute table respectively.
    Thanks
    Suri

    Surender,
    Once you specify in BW "," as the field separator, it will be interpreted as such. Of course, "Coca Cola, Inc" will be interpreted and loaded as two separate fields.
    "Data should be fixed in the source, whenever is possible". That's a phrase you'll hear a lot when dealing with BW, especially when loading data from flat files.
    Good luck.
    Regards,
    Luis

Maybe you are looking for

  • I synced my Ipod touch on my friend's itunes and every time I sync it on my itunes it deletes the ibooks that I have downloaded. I really want my music and my ibooks, please help me :(

    this is really, really annoying, I'm out and about a lot so I'd love to have both my ibooks and my music on my ipod touch!

  • Error 4261 and Error 4280

    Well....Like many others iTunes worked flawlessly for me for a couple years then just became a huge pain in the behind. When I first upgraded to 7.xx I lost the ability to burn cds on my dvd-ram drive (error 4280). I was still able to burn using my e

  • Logic crashes when saving

    on my brand new and properly clean installed macpro, a logic project keeps making me crazy. its a rather full project, i cleaned it up a lot already, but saving is nt possible in most cases. after each clean up, itry saving and it works (though it ta

  • 6310i SMS integration

    Hi I have PC suite 6.8.21 with an old 6310i phone that I used for a few weeks having lost my N70. I want to copy my sms's off the phone into outlook (they do not import into the n70 direct from previous experience). Pc suite does recognose the phone

  • Deserializing complex beans

    I am trying to retrieve a Data object, which has a List of Var objects and a List of Case objects. When I retrieve it it shows the Data object, but the two Lists are null. I think it is a client side problem, so I will start with my client side code