Loading data into 0FIAR_C03 A/R CUBE.

We are on BW 3.5 and I'm having an error loading data from the ods 0FIAR_003 LINE ITEMS into the cube 0FIAR_C03.
Data was successfully loaded into the ods.
The ods data is activated.
I get the error when updating the data target.
I can see in the monitor that there are a number of idocs sent but there are no idocs received.
Any suggestions on what I can check on. This is a new BW installation so there maybe a connection missing.
Thanks for your assistance.

Hi Dennnis,
Please check the source system connection. Give ST22 to check short dumps if any. system is able to process IDOCs at the time the message sent from BW system  but due to system errors this will happen.
YOu can delete the request in the Info Cube and reset the data mart status in the ODS Object and try to repeat the load Hope this will help you.
Cheers,
Ganni

Similar Messages

  • Unable to load data into Planning cube

    Hi,
    I am trying to load data into a planning cube using a DTP.
    But the system throws a message saying that, real time data loading cannot be performed to the planning cube.
    What would be the possible reason for the same?
    Thanks & Regards,
    Surjit P

    Hi Surjit,
    To load data into cube using DTP, it should be put in loading mode only.
    The real time cube behaviour is set to planning mode only when the data is input to the cube via the planning layouts / or through the Fileupload program.
    You can change the behaviour of the cube in RSA1 -> Right click on the cube -> Change Real-time load behaviour and select the first option(real time cube can be loaded with data; planning not allowed)
    Best Rgds
    Shyam
    Edited by: Syam K on Mar 14, 2008 7:57 AM
    Edited by: Syam K on Mar 14, 2008 7:59 AM

  • Getting an error while trying to load data into cube

    Hello,
    I am trying to load data into cube but it gives me following error:
    fiscal year variant not expected.
    Can someone tell what could be done on fiscal year
    Cheers
    Jim.

    Hi,
    May be you have not mapped anything to fiscal variant or not included fiscal variant in the cube but you have used fiscal period inside it.
    You should load fiscal variant if you wanna use fiscal period.
    Map fiscal variant to a constant K4 or from the source if present and then see the result.
    Generally it is K4 except for FI-CO cubes .
    In the transfer rules, select field '0fiscvarnt' 'Tp' click
    Enter K4 for Constant................Save and Activate
    Iam sure you'd fix the issue.
    Regards,
    Ray

  • Short Dump when loading Data into Cube UNCAUGHT_EXCEPTION(Pls Help)

    Dear Guru's
    i am trying to load data into a Cube from a ODS and the load gets dump...
    In Dump Analysis.....
    The exception 'ZCX_EDW_MAP_ROOT' was raised, but it was not caught anywhere         
    along   
    "UNCAUGHT_EXCEPTION" "ZCX_EDW_MAP_ROOT"                                       
    "ZCL_EDW_MAP_ROOT==============CP" or "ZCL_EDW_MAP_ROOT==============CM002"   
    "LOAD_MAPPING_INFOPROV"                                                                               
    So it would be great if some one can give me some suggestion to handle this issue
    Thanks in Adv
    Dev

    Dear Arun,
    i have checked the routine there exists some code
    Eg: data: vref_monitor type ref to zcl_edw_monitor,
    But to say fact i ddnot i understood it....
    Any suggestions dude...pls
    thanks in adv
    Dev

  • Error while loading data into cube

    hi BW gurus,
    when ever i am trying to load data into the cube from flat file after scheduling iam getting short dump in BW system. I checked it in st22 it is giving me a error as exception add_partition_failed. please help me to sort out this problem. If you know the error recovery please give me the answer in detail.
    I will assign points for good answers.

    This is what the note says:
    Symptom
    The process of loading transaction data fails because a new partition cannot be added to the F fact table.The loading process terminates with a short dump.
    Other terms
    RSDU_TABLE_ADD_PARTITION_ORA, RSDU_TABLE_ADD_PARTITION_FAILED, TABART_INCONSITENCY, TSORA, TAORA , CATALOG
    Reason and Prerequisites
    The possible causes are:
    SQL errors when creating the partition
    Inconsistencies in the Data Dictionary control tables TAORA and TSORA
    Solution
    BW 3.0A & BW 3.0B
    In the case of SQL errors:Analyze the SQL code in the system log or short dump and if possible, eliminate the cause. The cause is often a disk space problem or lock situations on the database catalog or, less frequently: the partitioning option in the ORACLE database is not installed.
    The most common cause of the problem is inconsistencies in the TAORA and TSORA tables. As of Support Package 14 for BW 3.0B/Support Package 8 for BW 3.1C, the TABART_INCONSITENCY exception is issued in this case. The reason is almost always missing entries in TSORA for the tablespaces of the DDIM, DFACT and DODS data classes.
    The TAORA table contains the assignment of data classes to data tablespaces and their attributes, for example:
    Tablespace Data class
    DDIM PSAPDIMD ........
    DFACT PSAPFACTD ........
    DODS PSAPODSD .......
    Foreach data tablespace, the TSORA table must contain an entry for the corresponding index tablespace, for example:
    TABSPACE INDSPACE
    PSAPDIMD PSAPDIMD
    PSAPFACTD PSAPFACTD
    PSAPODSD PSAPODSD
    In most cases, these entries are missing and have to be added. See also notes 502989 and 46272.

  • Error encountered while loading data into an Essbase cube from oracle DB

    Hi All,
    I am trying to load data into an Essbase cube from Oracle db. Essbase is installed in an 64 bit HP-UX machine and oracle database on HP -UX 11.23 B server. While performing the above I am getting the below error messages:
    K/INFO - 1021013 - ODBC Layer Error: [08001] ==> [[DataDirect][ODBC Oracle Wire Protocol driver][Oracle]ORA-01034: ORACLE not available
    ORA-27101: shared memory realm does not exist
    HP-UX Error: 2: No such file or directory].
    OK/INFO - 1021014 - ODBC Layer Error: Native Error code [1034] .
    ERROR - 1021001 - Failed to Establish Connection With SQL Database Server. See log for more information.
    Can you please help me out in identifying the issue, as why it could have occured , because of network problem or is there anything related to databse?
    Regards,
    Priya

    The error is related to Oracle, I would check that it is all up and running
    ORA-01034: ORACLE not available
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Getting error while loading  Data into ASO cube by flat file.

    Hi All,
    i am getting this error Essbase error 1270040: Data load buffer[1] does not exist while loading data into ASO cube.
    does anyone have solution.
    Regards,
    VM

    Are you using ODI to load the data or maxl? If you are using an ODI interface, are you using a load rule also which version of essbase and ODI are you using
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Error While loading data from 8 DSOname to Cube.

    Hi All,
    while loading data from 8<DSONAME> to CUBE , the data is Sucessfully loaded data into Cube, but the Request Status is shown in Yellow,why it is showing, please tell me how to make it Sucessfull.
    Thanks and Regards,
    santosh.

    HI All,
    In ST22 i'm getting Short Dump, the Error massage is
    MESSAGE_TYPE_X
    WHAT HAPPEN
    The current application program detected a situation which really
    should not occur. Therefore, a termination with a short dump was
    triggered on purpose by the key word MESSAGE (type X).
    Error Analyis is:
    Short text of error message:
    Generic process chain
    Long text of error message:
    Technical information about the message:
    Message class....... "RSMPC"
    Number.............. 000
    Variable 1.......... " "
    Variable 2.......... " "
    Variable 3.......... " "
    Variable 4.......... " "
    "MESSAGE_TYPE_X" " "
    "CL_RSSM_LOADING===============CP" or "CL_RSSM_LOADING===============CM005"
    "IF_RSPC_EXECUTE~EXECUTE"
    there is any Patch Problem...
    Please let me Know how to resolve this issue.
    thanks and regards,
    santosh.

  • Error when loading data into Planning

    Unable to load data into planning 11.1.2.3.200 using ODI 11.1.1.7
    Please find the errors from below logs:
    INFO  [SimpleAsyncTaskExecutor-2]: Oracle Data Integrator Adapter for Hyperion Planning
    INFO  [SimpleAsyncTaskExecutor-2]: Connecting to planning application [xxxxxxx] on [xxxxxxxxxxx]:[xxxx] using username [admin].
    INFO  [SimpleAsyncTaskExecutor-2]: Successfully connected to the planning application.
    INFO  [SimpleAsyncTaskExecutor-2]: The load options for the planning load are
      Dimension Name: Account Sort Parent Child : false
      Load Order By Input : false
      Refresh Database : false
    INFO  [SimpleAsyncTaskExecutor-2]: Begining the load process.
    DEBUG [SimpleAsyncTaskExecutor-2]: Number of columns in the source result set does not  match the number of planning target columns.
    INFO  [SimpleAsyncTaskExecutor-2]: Load type is [Load dimension member].
    ERROR [SimpleAsyncTaskExecutor-2]: Record [[A603010, null, null, null, null, null, null, null, null, null, null, null, xxxxx, -100, F3E0,C011,E7172_93275,FY17,Stage 1,Current Service Level,Jul, null, null, null, null, null, null, null, null, null, null, null, null, null, null, null, null, null, null, null, null]] was rejected by the Planning Server.
    ERROR [SimpleAsyncTaskExecutor-2]: Record [[A601060, null, null, null, null, null, null, null, null, null, null, null, xxxxx, -250, F3E0,C011,E7172_93275,FY17,Stage 1,Current Service Level,Jul, null, null, null, null, null, null, null, null, null, null, null, null, null, null, null, null, null, null, null, null]] was rejected by the Planning Server.
    log.err
    Account,Data Load Cube Name,Budget,Point-of-View,Error_Reason
    A603010,xxxxx,-100,F3E0,C011,E7172_93275,FY17,Stage 1,Current Service Level,Jul,Cannot load dimension member, error message is: RemoteException occurred in server thread; nested exception is:
      java.rmi.UnmarshalException: unrecognized method hash: method not supported by remote object
    A601060,xxxxx,-250,F3E0,C011,E7172_93275,FY17,Stage 1,Current Service Level,Jul,Cannot load dimension member, error message is: RemoteException occurred in server thread; nested exception is:
      java.rmi.UnmarshalException: unrecognized method hash: method not supported by remote object
    FDMEE log:
    ERROR [AIF]: Error: No records exist for Period 'Pd 2 - 2014-08-01'
    ERROR [AIF]: Error: No records exist for Period 'Pd 3 - 2014-09-01'
    FDMEE Logging Level is set to 5

    Are you sure that you haven't got Planning 11.1.2.3.500 in your environment? This sounds spookily similar to the issue described in note 1678759.1 which was seen after applying Planning 11.1.2.3.500. If it's definitely Planning 11.1.2.3.500 is there any chance that someone has applied ODI patch 18687916 to the ODI home (C:\Oracle\Middleware\odi)?
    If you /*are*/ running Planning 11.1.2.3.500 then you might need to apply patch 18687916 to C:\Oracle\Middleware\odi - you might need note 1683307.1 to take some of the pain out of applying this patch though.
    Given the error that you're seeing though there's a mismatch in versions of JAR files between ODI and the Planning server somewhere.
    Regards
    Craig

  • Steps for loading data into the infocube in BI7, with dso in between

    Dear All,
    I am loading data into the infocube in BI7, with dso in between. By data flow looks like....
    Top to bottom:
    InfoCube (Customized)
    Transformation
    DSO (Customized)
    Transformation
    DataSource (Customized).
    The mapping and everything else looks fine and data is also seen in the cube on the FULL Load.
    But due to some minor error (i guess), i am unable to see the DELTA data in DSO, although it is loaded in DataSource through process chains.
    Kindly advise me, where did i miss.
    OR .. Step by step instructions for loading data into the infocube in BI7, with dso in between would be really helpful.
    Regards,

    Hi,
    my first impulse would be to check if the DSO is set to "direct update". In this case there is no Delta possible, because the Change log is not maintained.
    My second thought would be to check the DTP moving data between the DSO and the target cube. If this is set to full, you will not get a delta. It is only possible to create one DTP. So if you created one in FULL mode you can't switch to Delta. Just create the DTP in Delta mode.
    Hope this helps.
    Kind regards,
    Jürgen

  • Load data into infocube

    hello can anybody please say me how to load data into infocube in bw7.0
    thanks a lot
    komal.

    Hi,
    These are the steps for creating an Info cube and data loading
    1. It is same as creating an Info cube in BW 3.5
    2. Here once u created an info cube,assign dimesions to it.
    3. Create application component, info source similar to BW 3.5.
    4. After creating info source, right click on it
    5. Here all the dimensions and key figures are mapped automatically in transformation rules.
    6. Right click on info cube find the option : Create Data transfer Process
    7. create an info package, as usual and schedule the package to load the data into an Info provider.

  • Can not load data into the ods.

    When I was trying to load data into BW3.5 from R3 system, I am getting this message
    "For InfoSource ZSD_A507_011, there is no Hierarchies for master data in source system R3PCLNT300
    "  any idea.  There is no hierarchies for this.

    Hello Mat,
    What are you trying to load??
    If the data source is a hierarchy datasource??
    just check this thread
    There are no hierarchies for this InfoSource in source system
    Thanks
    Ajeet

  • FDMEE Import error "No periods were identified for loading data into table 'AIF_EBS_GL_BALANCES_STG'

    Hi,
    We are having trouble while importing one ledger 'GERMANY EUR GGAAP'. It works for Dec 2014 but while trying to import data for 2015 it gives an error.
    Import error shows " RuntimeError: No periods were identified for loading data into table 'AIF_EBS_GL_BALANCES_STG'."
    I tried all Knowledge docs from Oracle support but no luck. Please help us resolving this issue as its occurring in our Production system.
    I also checked all period settings under Data Management> Setup> Integration Setup > Global Mapping and Source Mapping and they all look correct.
    Also its only happening to one ledger rest all ledgers are working fine without any issues.
    Thanks

    Hi,
    there are some Support documents related to this issue.
    I would suggest you have a look to them.
    Regards

  • How to load data into an ods from multiple info sources.

    hi all...
    i am given a task to load data into an ods from 3 infosources ...
    can someone plz give me the flow .
    thank u in advance..

    Hi Hara Pradhan,
    You have to create 3 update rules by giving the 3 different infosources while creating each update rule. And u have to create the infopackages under each infosource. with this u can load the data to the same data target from multiple info sources.
    Hope it helps!
    Assign points if it helps!

  • Can i use one interface to load data into 2 different tables

    Hi Folks,
    Can i use one interface to load data into 2 different tables(same schema or different schemas) from one source table with same structure ?
    Please give me advice
    Thanks
    Raj
    Edited by: user11410176 on Oct 21, 2009 9:55 AM

    Hi Lucky,
    Thanks for your reply,
    What iam trying is ...Iam trying to load the data from legacy tables(3) into oracle staging tables.But i need to load the same source data into two staging tables(these staging tables are in two different schemas)
    can i load this source data into two staging tables by using single standard interface(some business logic is there)
    If i can then give me some suggestion how to do that
    Thanks in advance
    Raj

Maybe you are looking for