Loading data into an array
Hi,
Suppose I have the following piece of code:
BEGIN
ResultSet rs = statement.executeQuery("SELECT name FROM users;");
Vector temp = new Vector();
while(rs.next()) {
String name = rs.getString(1);
temp.addElement(name);
String[] names = new String[temp.size()];
for(int i=0; i<names.length; i++) {
names[i] = (String) temp.elementAt(i);
END
Basically the idea this: select data from the database and store it in a ResultSet. Because the length of the row is unknown I use a temporary Vector (growable array). After all rows have been read I can declare a String array with a specified length based on the size of the Vector. By using a for loop I copy the data stored in the Vector to the array.
This works fine, but I believe this produced a lot of overhead. Is there a better/faster/smarter way to do this?
Thanks!
Jeroen
insted of for loop u can use
Vector.toArray().
Similar Messages
-
How to load data into html:select using Struts ?
How to load data into <html:select> using Struts ?
I can not load an array or collection (static or dynamic data) into drop down list control by <html:select /> Struts.
please use:
<html:select >
<html:options />
</html:select >
Please help me. please detail it. thanks a lot.
Message was edited by:
tranminhmanIn order to load a collection or array of data you can use <html:select> with <html: options collection="" name=""/>
here collection attribute refers to the Arraylist or Array of data and name is the name of the Form bean.
Hope this helps...
Chaitanya V -
Loading data into existing table
Hi I have tried to load data into a large table from a csv file but am not getting any success. I have this control file
LOAD DATA
INFILE 'Book1.xls'
BADFILE 'p_sum_bad.txt'
DISCARDFILE 'p_sum_dis.txt'
APPEND
INTO TABLE p_sum
FIELDS TERMINATED BY ',' OPTIONALLY ENCLOSED BY '"'
TRAILING NULLCOLS
SUMMARY_LEVEL ,
PERIOD_START_TIME ,
BUSY_HOUR ,
OMC ,
INT_ID ,
BTS_ID ,
BTS_INT_ID ,
CELL_GROUP ,
HO_PERIOD_DURATION ,
POWER_PERIOD_DURATION ,
MSC_I_SUCC_HO ,
MSC_I_TCH_TCH ,
MSC_I_SDCCH_TCH ,
MSC_I_SDCCH ,
MSC_I_TCH_TCH_AT ,
MSC_I_SDCCH_TCH_AT ,
MSC_I_SDCCH_AT ,
MSC_I_FAIL_LACK ,
MSC_I_FAIL_CONN ,
MSC_I_FAIL_BSS ,
MSC_I_END_OF_HO ,
MSC_O_SUCC_HO ,
The data is:
2 3-Nov-06 1000033 9 8092220 1440 1440 5411 5374 7 30 5941
2 3-Nov-06 1000033 10 1392190 1440 1440 0 0 0 0 0
2 3-Nov-06 2000413 3 2127446 1440 1440 80 80 0 0 83
2 3-Nov-06 2000413 4 2021248 1140 1440 0 0 0 0 0
2 3-Nov-06 2000413 5 2021252 1080 1440 1 1 0 0 1
2 3-Nov-06 2000413 6 2130163 1440 1440 2200 2193 2 5 2224
2 3-Nov-06 2000413 7 6205155 1020 1440 0 0 0 0 0
2 3-Nov-06 2000413 8 6200768 900 1440 30 30 0 0 31
2 3-Nov-06 2000413 10 2111877 1440 1440 0 0 0 0 0
2 3-Nov-06 1000033 18 1076419 1440 1440 75 73 0 2 79
2 3-Nov-06 1000033 19 8089060 1440 1440 0 0 0 0 0
but when I try to load the data, I get:
Column Name Position Len Term Encl Datatype
SUMMARY_LEVEL FIRST * , O(") CHARACTER
PERIOD_START_TIME NEXT * , O(") CHARACTER
Record 51: Rejected - Error on table OMC.P_SUM_BTS_HO_POWER, column SUMMARY_LEVEL.
ORA-01722: invalid number
I believe the data being loaded has to be NUMBER. Can anyone adivse what do I need to change to load the data. ThanksJustin,
Tried that, no luck:
Number to load: ALL
Number to skip: 0
Errors allowed: 50
Bind array: 64 rows, maximum of 256000 bytes
Continuation: none specified
Path used: Conventional
Table P_SUM, loaded from every logical record.
Insert option in effect for this table: APPEND
TRAILING NULLCOLS option in effect
Column Name Position Len Term Encl Datatype
SUMMARY_LEVEL FIRST * WHT O(") CHARACTER
PERIOD_START_TIME NEXT * WHT O(") CHARACTER
BUSY_HOUR NEXT * WHT O(") CHARACTER
OMC NEXT * WHT O(") CHARACTER
INT_ID NEXT * WHT O(") CHARACTER
BTS_ID NEXT * WHT O(") CHARACTER
BTS_INT_ID NEXT * WHT O(") CHARACTER
CELL_GROUP NEXT * WHT O(") CHARACTER
Record 51: Rejected - Error on table OMC.P_SUM_BTS_HO_POWER, column SUMMARY_LEVEL.
ORA-01722: invalid number
Any other sugesstion -
Shell Script Programming -- Loading data into table
Hello Gurus
I am using Oracle's sql*loader utility to load data into a table. Lately, I got an unlikely scenario where in I need to process the data file first before loading it into the table and where I need help from you guys.
Consider the following data line
"Emp", DOB, Gender, Subject
"1",01/01/1980,"M","Physics:01/05/2010"
"2",01/01/1981,"M","Chemistry:02/05/2010|Maths:02/06/2011"
"3",01/01/1982,"M","Maths:03/05/2010|Physics:06/07/2010|Chemistry:08/09/2011"
"4",01/01/1983,"M","Biology:09/09/2010|English:10/10/2010"Employee - 1 will get loaded as a single record in the table. But I need to put Subject value into two separate fields into table. i.e. Physics into one column and date - 01/05/2010 into separate column.
Here big problem starts
Employee - 2 Should get loaded as 2 records into the table. The first record should have Chemistry as subject and date as 02/05/2010 and the next record should have all other fields same except the subject should be Maths and date as 02/06/2011. The subjects are separated by a pipe "|" in the data file.
Similarly, Employee 3 should get loaded as 3 records. One as Maths, second as Physics and third as Chemistry along with their respective dates.
I hope I have made my problem clear to everyone.
I am looking to do something in shell scripting such that before finally running the sql*loader script, the above 4 employees have their records repeated as many times as their subject changes.
In summary 2 problems are described above.
1. To load subject and date into 2 separate fields in Oracle table at the time of load.
2. If their exists multiple subjects then a record is to be loaded that many times as there exists any changes in employee's subject.
Any help would be much appreciated.
Thanks.Here are some comments. Perl can be a little cryptic but once you get used to it, it can be pretty powerful.
#!/usr/bin/perl -w
my $line_count = 0;
open FILE, "test_file" or die $!;
# Read each line from the file.
while (my $line = <FILE>) {
# Print the header if it is the first line.
if ($line_count == 0) {
chomp($line);
print $line . ", Date\n";
++$line_count;
next;
# Get all the columns (as separated by ',' into an array)
my @columns = split(',', $line);
# Remove the newline from the fourth column.
chomp($columns[3]);
# Read the fields (separated by pipe) from the fourth column into an array.
my @subject_and_date = split('\|', $columns[3]);
# Loop for each subject and date.
foreach my $sub_and_date (@subject_and_date) {
# Print value of Emp, DOB, and Gender first.
print $columns[0] . "," . $columns[1] . "," . $columns[2] . ",";
# Remove all double quotes from the subject and date string.
$sub_and_date =~ s/"//g;
# Replace ':' with '","'
$sub_and_date =~ s/:/","/;
print '"' . $sub_and_date . '"' . "\n";
++$line_count;
close FILE; -
Can not load data into the ods.
When I was trying to load data into BW3.5 from R3 system, I am getting this message
"For InfoSource ZSD_A507_011, there is no Hierarchies for master data in source system R3PCLNT300
" any idea. There is no hierarchies for this.Hello Mat,
What are you trying to load??
If the data source is a hierarchy datasource??
just check this thread
There are no hierarchies for this InfoSource in source system
Thanks
Ajeet -
Unable to load data into Planning cube
Hi,
I am trying to load data into a planning cube using a DTP.
But the system throws a message saying that, real time data loading cannot be performed to the planning cube.
What would be the possible reason for the same?
Thanks & Regards,
Surjit PHi Surjit,
To load data into cube using DTP, it should be put in loading mode only.
The real time cube behaviour is set to planning mode only when the data is input to the cube via the planning layouts / or through the Fileupload program.
You can change the behaviour of the cube in RSA1 -> Right click on the cube -> Change Real-time load behaviour and select the first option(real time cube can be loaded with data; planning not allowed)
Best Rgds
Shyam
Edited by: Syam K on Mar 14, 2008 7:57 AM
Edited by: Syam K on Mar 14, 2008 7:59 AM -
Hi,
We are having trouble while importing one ledger 'GERMANY EUR GGAAP'. It works for Dec 2014 but while trying to import data for 2015 it gives an error.
Import error shows " RuntimeError: No periods were identified for loading data into table 'AIF_EBS_GL_BALANCES_STG'."
I tried all Knowledge docs from Oracle support but no luck. Please help us resolving this issue as its occurring in our Production system.
I also checked all period settings under Data Management> Setup> Integration Setup > Global Mapping and Source Mapping and they all look correct.
Also its only happening to one ledger rest all ledgers are working fine without any issues.
ThanksHi,
there are some Support documents related to this issue.
I would suggest you have a look to them.
Regards -
How to load data into an ods from multiple info sources.
hi all...
i am given a task to load data into an ods from 3 infosources ...
can someone plz give me the flow .
thank u in advance..Hi Hara Pradhan,
You have to create 3 update rules by giving the 3 different infosources while creating each update rule. And u have to create the infopackages under each infosource. with this u can load the data to the same data target from multiple info sources.
Hope it helps!
Assign points if it helps! -
Can i use one interface to load data into 2 different tables
Hi Folks,
Can i use one interface to load data into 2 different tables(same schema or different schemas) from one source table with same structure ?
Please give me advice
Thanks
Raj
Edited by: user11410176 on Oct 21, 2009 9:55 AMHi Lucky,
Thanks for your reply,
What iam trying is ...Iam trying to load the data from legacy tables(3) into oracle staging tables.But i need to load the same source data into two staging tables(these staging tables are in two different schemas)
can i load this source data into two staging tables by using single standard interface(some business logic is there)
If i can then give me some suggestion how to do that
Thanks in advance
Raj -
How can I load data into table with SQL*LOADER
how can I load data into table with SQL*LOADER
when column data length more than 255 bytes?
when column exceed 255 ,data can not be insert into table by SQL*LOADER
CREATE TABLE A (
A VARCHAR2 ( 10 ) ,
B VARCHAR2 ( 10 ) ,
C VARCHAR2 ( 10 ) ,
E VARCHAR2 ( 2000 ) );
control file:
load data
append into table A
fields terminated by X'09'
(A , B , C , E )
SQL*LOADER command:
sqlldr test/test control=A_ctl.txt data=A.xls log=b.log
datafile:
column E is more than 255bytes
1 1 1 1234567------(more than 255bytes)
1 1 1 1234567------(more than 255bytes)
1 1 1 1234567------(more than 255bytes)
1 1 1 1234567------(more than 255bytes)
1 1 1 1234567------(more than 255bytes)
1 1 1 1234567------(more than 255bytes)
1 1 1 1234567------(more than 255bytes)
1 1 1 1234567------(more than 255bytes)Check this out.
http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96652/ch06.htm#1006961 -
Error Loading Data into a flat file
I am recieving the following error when loading data into a flat file from a flat file. SQL 2005 is my back end DB. If I cut the file iin half approx 500K rows my ODI interface works fine. Not sure what to look at.. I rebuit the interface which before was just dying giving no error and now I am getting this.
Thanks
java.lang.Exception
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
at com.sunopsis.dwg.cmd.e.i(e.java)
at com.sunopsis.dwg.cmd.g.y(g.java)
at com.sunopsis.dwg.cmd.e.run(e.java)
at java.lang.Thread.run(Unknown Source)Figured it out, found similar post that stated changing the HEAP size
Increase the page size in odiparams.bat in the bin folder and restart Designer.
For eg:
set ODI_INIT_HEAP=128m
set ODI_MAX_HEAP=1024m -
How to put data into a array element in the BPEL
Hi,
I have a element in the WSDL which is of type Array. (i.e accepts unlimited data for the same element). How should i put a data into a array in the BPEL.
Example:
The below Example gives u an idea about wht iam asking:pasting a piece of my requirement:
<s:element minOccurs="0" maxOccurs="1" name="parameters" type="tns:ArrayOfCSParameters" />
<s:complexType name="ArrayOfCSParameters">
<s:sequence>
<s:element minOccurs="0" maxOccurs="unbounded"
name="CSParameters" nillable="true" type="tns:CSParameters" />
</s:sequence>
</s:complexType>
<s:complexType name="CSParameters">
<s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="RevenueItem" type="tns:RevenueItem" />
<s:element minOccurs="0" maxOccurs="1" name="AccountURIs" type="tns:ArrayOfString" />
<s:element minOccurs="0" maxOccurs="1" name="GroupURIs" type="tns:ArrayOfString" />
<s:element minOccurs="1" maxOccurs="1" name="Percentage" nillable="true" type="s:decimal" />
</s:sequence>
<s:attribute name="Version" type="s:decimal" use="required" />
<s:attribute name="URI" type="s:string" />
</s:complexType>
Any suggestion is appreciated.
Regards
pavanYou have 2 options i guess.
Use the transformation and the for-each to construct the array-list
or like Richard said, use a loop in bpel, assign in the loop an variable of element type="CSParameters" and append this variable to your variable with accepts the arraylist. -
Error in loading data into essbase while using Rule file through ODI
Hi Experts,
Refering my previous post Error while using Rule file in loading data into Essbase through ODI
I am facing problem while loading data into Essbase. I am able to load data into Essbase successfully. But when i used Rule file to add values to existing values I am getting error.
test is my Rule file.
com.hyperion.odi.essbase.ODIEssbaseException: com.hyperion.odi.essbase.ODIEssbaseException: Cannot put olap file object. Essbase Error(1053025): Object [test] already exists and is not locked by user [admin@Native Directory]
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:346)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2458)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:48)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:540)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:338)
at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:272)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:263)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:822)
at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:83)
at java.lang.Thread.run(Thread.java:662)
from com.hyperion.odi.common import ODIConstants
from com.hyperion.odi.connection import HypAppConnectionFactory
from java.lang import Class
from java.lang import Boolean
from java.sql import *
from java.util import HashMap
# Get the select statement on the staging area:
sql= """select C1_HSP_RATES "HSP_Rates",C2_ACCOUNT "Account",C3_PERIOD "Period",C4_YEAR "Year",C5_SCENARIO "Scenario",C6_VERSION "Version",C7_CURRENCY "Currency",C8_ENTITY "Entity",C9_VERTICAL "Vertical",C10_HORIZONTAL "Horizontal",C11_SALES_HIERARICHY "Sales Hierarchy",C12_DATA "Data" from PLANAPP."C$_0HexaApp_PLData" where (1=1) """
srcCx = odiRef.getJDBCConnection("SRC")
stmt = srcCx.createStatement()
srcFetchSize=30
#stmt.setFetchSize(srcFetchSize)
stmt.setFetchSize(1)
print "executing query"
rs = stmt.executeQuery(sql)
print "done executing query"
#load the data
print "loading data"
stats = pWriter.loadData(rs)
print "done loading data"
#close the database result set, connection
rs.close()
stmt.close()
Please help me on this...
Thanks & Regards,
ChinnuHi Priya,
Thanks for giving reply. I already checked that no lock are available for rule file. I don't know what's the problem. It is working fine without the Rule file, but throwing error only when using rule file.
Please help on this.
Thanks,
Chinnu -
Error while loading data into 0pur_c03 using 2lis_02_scl
Hi,
While trying to load data into 0pur_c03 by using Data Source 2lis_02_scl from R/3 the error message "The material 100 does not exist or not active" is being displayed. I have loaded master data for 0Material and performed change Run also.Still the problem is not resolved.Please suggest in resolving this issue.
Regards,
Hari Prasad B.I have the same problem in my system and i found that the material XXXXX had movements.....sales documents and more but in certain moment it material was deleted in R3 and it is not loaded into 0MATERIAL infoobject because is marked for deletion....
If you have this error must activate the load request manually and your infocube can hold the data without any problem.....
Regards -
Error while loading Data into Essbase using ODI
Hi,
I am very new to ODI. I have installed ODI and working on Demo environment only. I havn't done any configuration. I am using Essbase Technology which is coming by default.
I have created one sample outline in Essbase and a text file to load data into essbase using ODI.
Following my text file.
Time Market Product Scenario Measures Data
Jan USA Pepsi Actual Sales 222
I am getting the error. I have checked in Operator. It is giving at step 6 i.e. Integration SampleLoad data into essbase.
Here is the description.
from com.hyperion.odi.common import ODIConstants
from com.hyperion.odi.connection import HypAppConnectionFactory
from java.lang import Class
from java.lang import Boolean
from java.sql import *
from java.util import HashMap
# Get the select statement on the staging area:
sql= """select C3_C1 ""Time"",C5_C2 ""Market"",C2_C3 ""product"",C6_C4 ""Scenario"",C1_C5 ""Measures"",C4_C6 ""Data"" from "C$_0Demo_Demo_genData" where (1=1) """
srcCx = odiRef.getJDBCConnection("SRC")
stmt = srcCx.createStatement()
srcFetchSize=30
stmt.setFetchSize(srcFetchSize)
rs = stmt.executeQuery(sql)
#load the data
stats = pWriter.loadData(rs)
#close the database result set, connection
rs.close()
stmt.close()
Please help me to proceed further...Hi John,
Here is the error message in execution tab....
org.apache.bsf.BSFException: exception from Jython:
Traceback (innermost last):
File "<string>", line 20, in ?
java.sql.SQLException: Unexpected token: TIME in statement [select C3_C1 ""Time]
at org.hsqldb.jdbc.jdbcUtil.sqlException(jdbcUtil.java:67)
at org.hsqldb.jdbc.jdbcStatement.fetchResult(jdbcStatement.java:1598)
at org.hsqldb.jdbc.jdbcStatement.executeQuery(jdbcStatement.java:194)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java)
at org.python.core.PyMethod.__call__(PyMethod.java)
at org.python.core.PyObject.__call__(PyObject.java)
at org.python.core.PyInstance.invoke(PyInstance.java)
at org.python.pycode._pyx4.f$0(<string>:20)
at org.python.pycode._pyx4.call_function(<string>)
at org.python.core.PyTableCode.call(PyTableCode.java)
at org.python.core.PyCode.call(PyCode.java)
at org.python.core.Py.runCode(Py.java)
at org.python.core.Py.exec(Py.java)
at org.python.util.PythonInterpreter.exec(PythonInterpreter.java)
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:144)
at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
at com.sunopsis.dwg.cmd.e.i(e.java)
at com.sunopsis.dwg.cmd.g.y(g.java)
at com.sunopsis.dwg.cmd.e.run(e.java)
at java.lang.Thread.run(Unknown Source)
java.sql.SQLException: java.sql.SQLException: Unexpected token: TIME in statement [select C3_C1 ""Time]
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
at com.sunopsis.dwg.cmd.e.i(e.java)
at com.sunopsis.dwg.cmd.g.y(g.java)
at com.sunopsis.dwg.cmd.e.run(e.java)
at java.lang.Thread.run(Unknown Source)
Maybe you are looking for
-
Item Category 'L' (Subcontracting)
Hello, I would just like to ask if a UB-type PO (Stock Transfer Order) could have an item category 'L' which is Subcontracting. Currently, only item category 'U' (Stock Transfer) is available in the item category field when creating a UB-type PO thro
-
Optional variables within report not shown on portal
Hello, I have got following phenomenon: I created a report with the Report Designer. This report contains different queries that all use the same optional variable. Our first tries showed the selection screen for this variable within the portal. Afte
-
Adding Old templates to a DW8 re-install
Hey there, XP was behaving badly and I reinstalled it. Lo and behold, my templates (there are many of them) are on their template folder in their respective sites, but they are not associated with their sites in the File > New and the successive dial
-
Prime 2.0 to 2.1 installation
I am currently trying to upgrade Prime 2.0 to 2.1, following the instructions in the release notes. Having some issues uploading the 2.1 patch to the Virtual controller. Seems to be a syntax error/fat finger; Does anyone have any tips or tricks to
-
Hello everyone. I have a problem. I have a server that I register in the RMI registry. Client from a remote machine get the server (as a remote object) and calls his method for the generation of another object on the parameters passed. The server cre