Loading Demand plan data from APO to BW

Hi Gurus,
We have requirement as below.
we have to extract two key figures from APO to BW system
The 2key figures of APO will get data as below:
First key figure has to hold Yearly snap shot and 2nd Key figure has to hold QTY snapshot.
we have constrained production plan & sales plan keyfigures in apo demand planning and the requirement is to extract these 2 keyfigure quaintest into BI.
Data Example as below:
KF1: Yearly snapshot
KF2: Quarterly snapshots
Yearly data means from Jan to Dec and
Quaterly data is as below
Qtr1 - Dec JAN to Dec
Qtr2 (in FEB) - Mar to Dec
Qtr3 (in May) - Jun to Dec
Qtr4 (in Aug) - Sep to Dec
so please let me know to how to handle or extract these data into BW.
Thanks,
Shailaja

Hi Venkat,
Yes, both the key figures are ther in the same planning area.
But my question here is how to get that data into BW? meaning...
If APO/DP does the planning in the month of Sep 2010 for Jan to dec 2011 and the
values are like
Sep-10   jan      Feb mar   april may june july aug sep oct   nov dec
               15     14     13      11    10     11     12     16    14         15   22     20
Dec-10   12     14   16        18    29     20    18     15   14    12   17        20
Mar-11          10 12   13       14     15   16    17 18         20
Jul-11                                  20       40     30      40       50
meaning, If the planning is done in the month of Sep 2010 for the yr 2011 as explained above that values should be extracted into BW and the next planning will be done in the month of Dec 2010 again for entire yr of 2011 i.e. Jan 2011 to Dec2011.
But the values should be captured as they are.. that means if i use DSO the values from request1 to request2 will be over written n if i use the cube they will be added up..
Request1 will hold data of Sep2010: planning data
Request2 wil hold Dec 2010 data ....n req3 will hold data of Mar 11...
but users want to see the values or planning figures as they are.
Hope i made my requimrent more detailled.
Please let me know the solution to get the data as it is in BW.
Thanks,
Shailaja

Similar Messages

Clarification on details regarding getting data from APO into BW

Hi Friends,
I need some clarification in terms of getting data from APO into BW for reporting:
I observed that SAP has provided standard data flows for PPDS module, where as for the Demand Planning and Supply Network Planning SAP has just provided some standard InfoCubes ex: 0APO_C07, 0APO_C10, 0APO_C11, 0APO_C12.
Which makes me believe that for Demand Planning and Supply Network Planning we need to generate DataSources from the Planning books in DP & SNP and build our own custom data flows. In that case what is the use of above mentioned InfoCubes provided by SAP?
Also in my current project the client has built a custom DataSource on top of a Planning Book in DP and created custom data flow in BW for reporting and also created a Back up cube in APO.
My question on this is, what is the use of this Back up cube in APO, what is the need to maintain two same cubes in two different systems?
My next question is, I have installed complete data flow for 0APO_C02 (Orders Data) in BW and loaded data. In SAP documentation it says when we try to load data for a particular date range using this InfoSource (0APO_PPDS_ORDER_01), it directly loads data from the live cache.
Is there a way to know if the data is coming from Live Cache or from APO server, can we get data from live cache for 9A*** Datasources also, which we create on planning books in DP and SNP?
Any comments and Info will be greatly appreciated. Thanks!

Hi Sunitha, thanks for your inputs. So does that mean for Demand Planning and Supply Network Planning, SAP has not given any standard DataSources because it makes more sense to build DataSources from the planning books as each company has their own planning strategies based on how they do there business. Right?
And for these modules there is no other way rather than generating DataSources from Planning Books and build the Data Flows based on it. Right?
Also these generated DataSources i.e. 9A**** pull data from live cache itself right or is there any setting that we need to enable for it to get data from live cache?
Thanks again for your valuable inputs hope to get answers to above questions as well.

CIFing the data from APO to ECC

Hi - I know how to CIFing the data from ECC to APO. But i would like to know how to transfer the data from APO to ECC.I also would like to know how to debug the code...I see some of the questions in this forum on CIF debugging, but they are all CIFing the data from ECC to APO, but i need the other way around ( APO to ECC )
Could anyone provide me the detail steps to CIF debugging ?
I really appreciate your help.

Hi
What kind of data do you want to transfer from APO to ECC ? Lets say you want to transfer live cache reqs generated by APO to R/3 and create firmed reqs , then the following are the prerequisites
1. Make the publication setting /n/sapapo/cp1 as mentioned by DB
2. Make sure the material -plant for which you want to transfer reqs is active in the PO/ Preq integration model in R/3
3. In APO /n/sapapo/sdp110 make sure the transfer setting is set to immediate.
Once all this is done , you dont have to do anything manually. The reqs will get transferred to R/3 automatically.
Also we have to transfer master data from R/3 to APO since R/3 is the master and i dont think it is possible to do the opposite - transfer of master data from APO- R/3 (no standard tool available) . Also we generally transfer only live cache reqs and PIR's (demand plan) back to R/3 . For PIR's you need to use the transfer profile.
Thanks
Aparna
Edited by: Aparna.Ranganathan on Feb 11, 2011 5:21 PM

Transfer of data from APO to ERP via IDOC

Hi,
I know we can transfer the of transactional data(Planned orders) from APO to R/3 is done via CIF.
Suppose if I need to transfer the same via IDOC instead of CIF how can I do it?
Let me know the steps to follow and way to find out how the data got transferred by IDOC?
For e.g. When I have transfer a planned order from APO to ERP, the data should be populated in the IDOC LOIPRO01 on the ERP side.
Cheers,
Simha.

Hi,
For a thouht If you want to use that IDOC data to be transfer to an other system from R/3 then let the data flow through CIF and in INBOUND exit wright code to create IDOC.
But Iam not sure whether it works.
Please eloborate requirement.
Regards,
Kishore Reddy.

Not able to cif transiton data from APO to R/3 and from R/3 to APO

Hi:
I have made all relevant setting as per required for configuration of cif architecture in R/3 and in APO.I am able to cif master data from R/3 to APO but when I am transferring Planned Order from APO to R/3 or Sales Order from R/3 to APO I am not able to tranfer it .Even I am not getting any blocked q.
Even I am able to access remote login to both system by RFC Connection.
Please let me know how to debug it and solve it.
With Regards
Ashish Gupta

Hi Ashish,
Please try ciffing only one transactional data and then check on the application logs using t-code CFM1 or SLG1 in R/3 and /n/sapapo/c3 & slg1 in APO. This will give you idea where is going on wrong.
Kindly confirm
Regards
R. Senthil Mareeswaran.

Extract data from APO to BW

Hi Team,
APO is very new for me.
My requirement is:
I need to extract Sales Data from APO system to BW system.
It would be great, if you can please provide me step by step process for this.
Thanks & Regards,
Vipin

Hi Vipin,
Its the same steps that you need to follow as when you do a R/3 extraction in BI/BW. Proabaly the datasource names might being with '8' ie if there is an object by name '0MATERIAL' in APO which is going to form a source for BW then in RSA5 you need to look for the datasource name '80MATERIAL'. Then follow the steps below:
1. in the APO system, Goto RSA5, Choose the Datasources related to sales and activate it.
2. Goto RSA3 and check the extractor, when you have to specify the client name give the name of the BI client and extract.
3. In the BI/BW system, goto Source system and choose the name of the APO client and then do a check to see if there is a valid RFC connectivity.
4. Goto Datasources and choose the source system to be the APO client and replicate the datasources.
5. The datasource will be visible now, create an infopackage and do the normal process from there to do the data load to any target.
Make sure the target is active and then do the DTP to get the data from APO to BW system.
Thanks
GURU

How to extract data from APO to BW(not APO's BW)

Hi, expert.
Now I want to extract data from APO to BW (not APO's), what's the data flow.
1. APO datasource----->BW (not APO's) datasource----->BW (not APO's) infocoube
2.APO datasource----
>BW (APO's) -
>BW (not APO's)
I want to create query on the BW not APO's.
Which one is right? or there is another way?
Thanks in advance.

Hi Bruce,
If I understand your question correctly your scenario 1 comes closest to a solution:
1) Create/activate Datasource in APO system and test it using tcode RSA3 (assuming it is SAP APO)
2) Replicate the Datasource in BW + create infopackage which will load the data into PSA
3) Create a DSO (if you like a layered approach) and a Cube on top + a Multiprovider above
4) Connect BW Datasource to DSO and DSO to cube (Transformations + DTPs to load)
5) Create a query on the Multiprovider
Hope this helps.
Grtx
Marco

Extracting Data from APO PP/DS to BW

Hi Gurus,
I'm trying to extract data from APO PP/DS (SCM 5.1) to BW (BI 7.0). I'm new to SCM and am not sure how the extraction from SCM to BI happens other than that we need to read data from LiveCache.
The extractor we are interested are
0APO_PPDS_RESCAPREQ_01
0APO_PPDS_PROD_CUST_01
0APO_PPDS_OPERATION_01
0APO_PPDS_ORDER_01
Pls kindly help me out with the procedure.
Thanks in advance.

Hi
Have a look at the below urls..
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5f229690-0201-0010-84ba-9ee5a8958a05
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4fe5d590-0201-0010-6c8d-ada86492cf11
Re: APO to BW Design Question
Re: APO BW Integration
Hope it helps
Thanks
Teja

HT1766 I have forgotten my iPhone backup password. Is there a way of getting it as I am trying to load my old data from iPhone 4 to an iPhone 5?

I have forgotten my iPhone backup password. Is there a way of getting it as I am trying to load my old data from iPhone 4 to an iPhone 5?

If on a Mac, and you elected to save such to your Keychain, you can recover it from your Keychain. Otherwise, you can't.
While you can continue to sync/backup, if you can't remember it & want to remove it, you'll have to delete your existing backups & restore the phone as a new device. Your data will be unrecoverable.

Using ABAP DATA FLOW to pull data from APO tables

I am trying to use an ABAP Data flow to pull data from APO and receive error 150301. I can do a direct table pull and receive no error, but when I try to put it in an ABAP data data flow I get the issue. Any help would be great.

Hi
I know you "closed" this, however someone else might read it so I'll add that when you use an ABAP dataflow, logic can be pushed to ECC - table joins, filters, etc. (Which can be seen in the generated ABAP).
Michael

Error during extraction data from APO system

HI Gurus,
We are extracting data from APO system at regular intervals. As poart of business requirement, we enhanced the data existing data source in APO dev system and replicated the same in BW dev system and activated the Tx structure and Tx rules.
When we checked it is working fine in dev environment.
Now we moved the same in Quality system, and we tried to extract data, it throws error " error in data selection in source system".
We tried to check in RSA3 in APO and found that the extract program still refers to the old extract structre and gives dump " Extract structure unknown".
Could anybody throw some light on this issue.
Tnx in advance.
Guru

Hi,
Have u collected all the objects in R3,like the Table/View , DS,Extract Structure.
And
Has replication been done in BI side for the same.
Rgds
SVU
Edited by: svu123 on Sep 24, 2009 7:50 AM

Loading master/transaction data from BI to NW BPC

hi
what is best way of loading master & transaction data from BI to BPC?
I know around 6 options for loading master data and 5 options for loading transactional data from BI to BPC .
What is easiest and recommended method? what is typical method followed in your NW bpc projects?
thanks,.

Hi Raju,
There is a white paper on Loading master data. I've used it previously and both options work quite well. You can use either of them depending on what you are comfortable with. Its available on the HOW To white papers.

Retraction cost center plan data from BPC to ECC

HI Experts,
We are integrating BW-BPC.
The client wants to Retract the data from BPC to ECC System for reporting purposes.
u201CIn order to be able to calculate standard costs correctly in production plants planning data from BPC is needed in SAP ECC.
The data needed is the planning data on cost centers which are currently entered into SAP manually via transaction KP06. This data will now be entered into BPC instead and therefore it is required to get an interface between BPC and SAP ECC for transferring data.
A description of the process and the data needed is available in the section u201CSAP ECC Screen Dumpu201D sectionu201D including screen dumps from ECC
If this interface is not created the task of entering in the planning data will double as the data must be entered both in BPC and SAP ECC. The process of entering in the data twice I estimate will add 1 u2013 2 extra days of work for each subsidiary involved in this.u201D
What is the options to support this Business Process of getting data from BPC to SAP ECC.
Regards
venu
Edited by: venu WAD on Aug 19, 2011 7:19 AM
Edited by: venu WAD on Aug 19, 2011 10:17 AM

Hi Keyrun:
Please refer to slide 7 of document below.
"SAP NetWeaver 7.0 Data Retraction in BI Integrated Planning"
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30af46fb-eb4f-2a10-4899-9167af035742?quicklink=index&overridelayout=true
>Online documentation: http://help.sap.com/saphelp_sem60ep1/helpdata/en/99/97157967e3440a94d199538959cd0b/frameset.htm
>See SAP Note 525543 for additional documentation on field mapping.
Regards,
Francisco Milán.
Edited by: Francisco Milan on Jun 22, 2010 8:13 PM

Extraction of plan data from S&OP HANA (on-premise)

Hi Experts,
We are integrating S&OP on-premise (source) with CRM (target) application for sales forecasting, can you guide as to which table to extract plan data from?
Regards,
Aditya G

Are you attempting to extract calculated key figure data or stored key figure data. The latter will be much easier due to the construct of the system. Stored key figure data can be found in the 'timeseries' table.
Stored data surfaces from the join of three main tables.
xxx represents your planning area name
### represents your time profile #
Note schema and table names might not be exactly as written below, since I'm going off memory.
SAPSOPG.SOPDM.PLOBJECT_xxx
SAPSOPG.SOPDM.TIMESERIES_xxx
SAPSOPG.SOPDM.TIMEPROFILE_###
Conversely the stored data can be extracted using the generated hana analytic view for your planningrp area. I don't recall the exact path to that view from memory.
Calculated key figure data extraction would require extra prescriptions that I'll defer to an expert to better explain.

Loading hirarchy master data from flat file to BW

hai,
i am new to BW Environment, thanks in advance for the Forum.
while loading hierarchy master data from the flat file to BW, i am getting an error as follow
WITH AN OPEN SQL SELECT, THE OUT PUT AREA USED TO HOLD THE SELECTED RECORDS MUST BE ATLEAST AS WIDE AS THE DATABASE TABLE FROM WHICH RECORDS ARE BEING READ.
IN THIS CASE , THE DATABASE TABLE IS 167 BYTES WIDE, BUT THE OUT PUT AREA IS ONLY 141 BYTES WIDE
pl's any one can help how to solve this problem.
Thanks in advance to the Forum.
regards
Reddy

Hi,
This is the procedure.
1. Create m-data with or without attributes.
2. Create infosource .
    a) with flexible update
         or
    b) with direct update
3. Create transfer rules and assign tyhe names of m-data and attribute in "Transfer rules" tab and transfer them to communication structure.
4. Create the flat-file with same stucture as communication structure.
5. if chosen direct update then create infopackage and assign the name of flat-file and schedule it.
6. if chosen flexible update the create update rule with assigning name of the infosource and the schedule it by creating infopackage.
Hope this helps. If still have prob then let me know.
Follow this link also.
http://help.sap.com/saphelp_nw2004s/helpdata/en/b2/e50138fede083de10000009b38f8cf/frameset.htm
Assign points if helpful.
Vinod.

Loading Demand plan data from APO to BW

Similar Messages

Maybe you are looking for