Loading DVD software on a notebook

How do I load my DVD provided Adobe software on my notebook (which does not have a DVD drive)?

Hello. If it helps, you can download the Acrobat X Pro from adobe.com/downloads or this link for AC X (https://www.adobe.com/cfusion/tdrc/index.cfm?product=acrobat_pro&loc=en) and enter the serial number from the box. The bits are same.
Thanks
Kiran Kumar, Adobe Product Mgmt

Similar Messages

How to load dvd softwares on Ipad2 ?

Hi everyone, I have an Ipad 2 and I wonder how to load my Ilife 2011 (family) version into my Ipad2 ???
of course I am talking about Ilife version on DVD...
I hope I would not obliged to get a new licence from the applestore...

It will not work. iLife is for Mac OS but the ipad runs iOS. Different operating system. Think of it as one talking german and the other speaking chinese. The only way to load apps onto the ipad is via the appstore.
Its the same reason you cant run PC software on a Mac.

Satellite A660 - 3D DVD software runs out of date or is secretly altered

Whats going on; why do I get lynched to pay an additional $59 for software to make my Satellite 3D work?
Ok.
This probably sounds nuts; but my Toshiba Blu-Ray DVD software seems to have a DVD/Blu-ray prevention program in it. Preventing 3D and smaller issues.
It has been out of whack since I updated the software on the Toshiba site and when I updated the nVidia GTS 350M drivers.
That may be co-incidental to the problems which began in previous month/s; as I don`t always play discs on this laptop; so pinning a date when it went pear-shaped is harder.
But, after going through a nightmare (of not working on DVD or Blu-Ray on half my discs for months now); I installed the latest TRIAL ($59) Corel WinDVD 11 Pro player and everything (including 3D) works perfect again. But for 30 days only; until/unless I`m robbed of $59 additional that is.
The problem is/was;-
3D only worked on half of my Blu-Ray 3D discs using pre-installed (and later updated) Toshiba COREL WinDVD media PLAYER. Sometimes it only played 3D side by side; 2 images. No 3D. Some Blu-Ray 3D discs were fine ODDLY. Region code not an issue.
Toshiba DVD 3D player/upconvertor program was the worst (not the SD version, I dont use).
Toshiba (HD) 3D player would not recognise half of my Blu-ray 3D laptop disc drive content. "DVD drive not recognised" error message.
Toshiba DVD player itself would not upconvert any normal DVD to 3D.
Toshiba DVD player would only play NORMAL 2D when running upconvert (no 3D).
Toshiba DVD player would only play HALF-SPEED DVD when upconvert was disabled. When trying to play a DVD in normal 2D mode.
All settings were tried and altered to fix the problem around a thousand times.
Software uninstalled and re-booted and re-installed a dozen times each.
I also had to un-install the software and re-boot and re-install the following;-
nVidia graphics driver (from nVidia sites own 295.73 and re-install Update to the `older` nVidia Toshiba 260.51 driver).
I used to be able to upconvert DVDs to 3D using this laptop; so it did work many months ago; but now that has all stopped for months now.
Its a pain as I have un-installed everything and re-installed all the relevant software from the Toshiba home page; but no solution for the problem without getting mugged an extra $59.
I hate computers for the ten-thousandth time.
1 minute Ramble:-
Its the last Microsoft product I will ever buy (Windows Ultimate rubbish [had to buy a new A3 color lazer printer as no Win 7 drivers for my existing laser printer]).
SAMSUNG (3D internet TV) products from now on. No computers for ten years. Until the rats get it right and stop experimenting on my wallet. $10,000 on PC products in the past 5 years and still being able to do simple things like watch a 3D movie is a hit and miss affair.
I`m rambling....because a hundred hours reading on how to get it working again has scrambled my head.
Spec
Toshiba A660 3D laptop. Satellite.
Windows 7 Ultimate. Updated.
Intel i7 1.73Ghz
Graphics is GTS 350M
4GB Ram (8-gig upgrade on order)
Spare 550GB hard-drive space.
Toshiba site; Bios updated.
Toshiba own DVD 3D player (doesn't cut the mustard) Version 4.00.1.08
Toshiba Corel WinDVD 3D player (doesn't cut the mustard) Version 10.0.5.822
The Nvidia graphics always works fine on the test background page; which makes me think software; but all the relavant software has been updated. Re-installed and re-tried a hundred times with different settings.
I thought the discs were the problem. But 50 DVDs not working in 3D up-converting, or faulty all by themselves? And half of my 3D Blu-Ray collection?
I wondered if these these problems are deeper than this one system. Whether there was a systemic problem somewhere (besides blaming the buyer end-user).
Toshiba assist line in one call was a guy who knew far less than me and had to ask someone advice for every single part of the call. 2 hours to tell me to re-install the software in a long, slow, bit-by-bit way, eventually. We done everything they can do to help. Now they seem to blame the discs and don`t have any answer.
Microsoft x64 Ultimate says its roger all to do with them on their helpline/e-mail assist.
I tried nVidia to no avail;
Any ideas; do I bite the bullet and everyone eventually be forced bit by bit to pay for $59 software to get the thing working.
Whats the beef?

Hi
You wrote really long story :) anyway this is an user to user community Im not sure if I could clarify all these issue for you but I would try to share my knowledge with you.
But firstly it would be really interesting to know what Satellite A660-xxx do you have exactly?
You said that you have installed the Win 7 ultimate.
According to the Toshiba page the notebook was preinstalled with Windows Home Premium. The preinstalled WinDVD was a full version (not trial) and you have not to pay for this software. In my case I have not to pay for any software (except MS Office :) )
you said also:
> I installed the latest TRIAL ($59) Corel WinDVD 11 Pro player and everything (including 3D) works perfect again. But for 30 days only; until/unless I`m robbed of $59 additional that is.
So it seems that you dont use the preinstalled Win DVD but you have installed other version which was not preinstalledso you have to purchase such version if you want to use a full version of any software which is not part of Toshiba image.
> 3D only worked on half of my Blu-Ray 3D discs using pre-installed (and later updated) Toshiba COREL WinDVD media PLAYER. Sometimes it only played 3D side by side; 2 images. No 3D. Some Blu-Ray 3D discs were fine ODDLY. Region code not an issue.
Take a look into this Toshiba document:
+3D video content not displayed in 3D when using the Toshiba Blu-ray Disc Player+
http://aps2.toshiba-tro.de/kb0/TSB1C038C0000R01.htm
>Toshiba DVD 3D player/upconvertor program was the worst (not the SD version, I dont use). Toshiba (HD) 3D player would not recognise half of my Blu-ray 3D laptop disc drive content. "DVD drive not recognised" error message. Toshiba DVD player itself would not upconvert any normal DVD to 3D. Toshiba DVD player would only play NORMAL 2D when running upconvert (no 3D). Toshiba DVD player would only play HALF-SPEED DVD when upconvert was disabled. When trying to play a DVD in normal 2D mode.
Found some info regarding the Toshiba player which should provide answers to most mentioned issues:
+Toshiba DVD Player Troubleshooting+
http://aps2.toshiba-tro.de/kb0/TSD17036L0000R01.htm
+Toshiba DVD Player Settings+
http://aps2.toshiba-tro.de/kb0/TSB17036M0000R01.htm
+Important Information for Using the Toshiba DVD Player+
http://aps2.toshiba-tro.de/kb0/TSB17036N0000R01.htm
+Useful information for playing DVDs with the Toshiba DVD Player+
http://aps2.toshiba-tro.de/kb0/TSB17036O0000R01.htm

I've bought an Apple USB drive, can I use this to load DVD's onto my computer so I only need to take the laptop on holiday with me rather than the USB drive and dvd's?

I've bought one of the Apple USB Superdrives thinking I could use it to load DVD's and save them onto my macbook pro, can anyone confirm if I can or can't do this?
If I can how do I do it?

DtheG13 wrote:
Ok so any chance you could explain to me exactly what I need to do as I am absolutely clueless! I have a pile of DVD's, the USB superdrive and I've just downloaded the Handbrake software. When I put the DVD into the superdrive it starts playing, how do I get the series onto my computer?
If you haven't done this before, there are a few things you need to know. Sorry to say that this is not yet a simple, straightforward process like it is for music CDs. It helps to be a little geeky. You will need to make some choice about file format and file size if there is any chance that the imported discs will take up more space than you have available on your hard drive. If you are willing to learn, you should read the Handbrake User Guide and other articles on the Web about importing DVDs.
If you think this is starting to look complicated and you don't have time to figure it out before the trip, it might be easier to just bring the discs.
I have found that Handbrake can't import every disc. I think Mac DVD Ripper Pro is a much easier program to use, and it will import almost any DVD pretty reliably, but it costs money. For me it is worth it.
No matter which way you do it, it is going to take a lot of time to import a bunch of discs. It is going to take a lot more time than importing music CDs.

Loading DVD's on 80 gig Video Ipod

We got a new 80 gig Video Ipod for christmas and want to load our DVD's. We tried down loading a software that didn't work. Can someone make recommendation of an easy software that works, and since I am not real computer savvy any detailed instruction would be appreciated.

There are plenty of good free programs out there. Here is a link to a discussion on just that free programs for mac and windows. http://forums.ilounge.com/showthread.php?s=&threadid=123067
You really do not need to pay for a program and if you do choose to do so consider another product then the one from that is recommended by Spammers... that would be cucosoft. They are all over these threads. There are also some great pay programs out there. But again, try the free ones first. Then if not do a search and you will find many, many pay programs out there from companies far more reliable then the one recommend by the SPAMMER on this thread.
Also another free program that works well is this one:
http://www.squared5.com/svideo/mpeg-streamclip-win.html

I have a PowerPC G4, 1.5 Ghz, with 1.5 GB of ram. Currently running OSX 10.4.11. Can I upgrade to 10.5.8 (or higher)? Need to load new software and said that was the minumum requirement.

I have a PowerPC G4, 1.5 Ghz, with 1.5 GB of ram.
Currently running OSX 10.4.11.
Question: Can I upgrade to 10.5.8 (or higher)? Need to load new software and said that was the minumum requirement was 10.5.8
Thanks, WPC-2012

Mac OS X 10.5 Leopard installation system requirements
http://support.apple.com/kb/TA24950
Leopard is no longer available at the Apple Store but may be available by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753).
If you can't obtain a retail install DVD from Apple, look on eBay or Google the installer part numbers to possibly find at an on-line store. Here's what to look for:
MB427Z/A Leopard 10.5.1 install DVD
MB576Z/A Leopard 10.5.4 install DVD
MB021Z/A Leopard 10.5.6 install DVD (single user)
MB022Z/A Leopard 10.5.6 install DVD (5-user family pack)
Installing Mac OS X 10.5 Leopard
http://support.apple.com/kb/HT1544
Mac OS X 10.5 Leopard Installation and Setup Guide
http://manuals.info.apple.com/en/leopard_install-setup.pdf
After you install the base 10.5, download & install the 10.5.8 combo update at http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
The DVD should look like this
Caution - Leopard does not support classic mode. So, if you currently open OS 9 apps in classic mode, you won't be able to do this if you upgrade to Leopard.
 Cheers, Tom

HP MediaSmart DVD Software

I am unable to install HP MediaSmart DVD Software after upgrading to windows 10 which prevents my notebook to read or write from my blu-ray drive.Any help will be appreciated.

In "Device Manager", under "DVD/CD-ROM drives", I see the following:
hp BDDVDRW CH20L
I click on "hp BDDVDRW CH20L", and I see several tabs.
In the tab marked "Driver", we have the following:
Driver Provider:   Microsoft
Driver Date:           6/21/2006
Driver Version:     6.1.7601.17514
Digital Signer:      Microsoft Windows
In that same tab, clicking on "Driver Details" gives us the following:
Driver files:      C:\Windows\system32\DRIVERS\cdrom.sys
Provider:           Microsoft Corporation
File version:    6.1.7600.16385 (win7_rtm.090713-1255)
Copyright:       Microsoft Corporation. All Rights Reserved.
Digital Signer:   Microsoft Windows
I think that, back in October 2014, when this Blu-ray issue first came up, I updated the driver. That may be why you see the following different versions :
6.1.7601.17514
6.1.7600.16385 (win7_rtm.090713-1255)
So, how would I update the firmware? To what version should I update the firmware?

I am using FCP 7.0.3.on my Mac Pro. I bought a new mac book pro and loaded the software on to the lap top but the software is 6.0.3. How do i get the update to the lap top?

I am using FCP 7.0.3 on my Mac Pro. I bought a new mac book pro and loaded the software on to the lap top but the software is 6.0.3. How do i get the update to the lap top?

.. and by the way, the jump from FCP 6.0.3 to FCP 7.0 (or higher) isn't an "update" It's a full version "upgrade" that has to be done using the install discs (or disc images).
-DH

Can i load cc software on more than one computer?

I have a subscription to Adobe CC for my home iMac and I'm wondering if I can load the software on my laptop in addition to my home computer?

Yes, you can install on multiple computers and activate on two at a time for your own use.

HP MediaSmart DVD software and major Blu-ray issues

In September 2010, I bought an HP Pavilion Elite HPE 250-f desktop computer (running Windows 7). This computer was advertised as having a Blu-ray DVD player, as well as players for regular DVDs and CDs. From September 2010 to October 2014, I successfully played regular DVDs and CDs. But in October 2014, for the first time, I needed to view a Blu-ray DVD. Specifically, I needed to view the "Divergent" Blu-ray.
When I tried to play the "Divergent" Blu-ray (which was made in 2014), the HP MediaSmart DVD software (version 3.1.1.3317) and the Windows Media Player detected the Blu-ray but were not able to play the Blu-ray.
Next, I downloaded the Media Player Codec Pack, http://download.cnet.com/Media-Player-Codec-Pack/3000-13632_4-10749065.html. This Codec Pack was supposed to help Windows Media Player play the Blu-ray. That did not work.
I then downloaded Cyberlink PowerDVD 14, which played the Blu-ray for only about 7 seconds before crashing.
I downloaded TotalMedia Theatre version 6.0.1.123. However, this software did not even detect the Blu-ray.
Recently, I decided to revisit this issue. I installed the most advanced version of HP MediaSmart DVD. I installed HP TouchSmart DVD, version 4.1.2.5122.
TouchSmart flawlessly played disk 1 of the 2-disk "Star Trek" Blu-ray set (made in 2009). However, TouchSmart was not able to play the "Divergent" Blu-ray at all. After failing to play the "Divergent" Blu-ray, TouchSmart attempted to play disk 2 of the "Star Trek" Blu-ray set. TouchSmart played disk 2 with poor video.
Next, for some strange reason, TouchSmart became totally inaccessible. I could not start TouchSmart. I rebooted the computer. TouchSmart was then able to play the "Divergent" regular DVD, but was unable to play the "Star Trek" Blu-rays at all.
I did a system restore to the point just after the installation of TouchSmart. TouchSmart played regular DVDs well, but still could not play the "Star Trek" Blu-rays at all.
Next, I got rid of TouchSmart and installed HP MediaSmart DVD, version 4.1.4229 (sp49489.exe). MediaSmart 4.1.4229 flawlessly played the "Speed" Blu-ray (made in 2006). However, MediaSmart 4.1.4229 failed to play either of the "Star Trek" Blu-rays. And after failing to play the "Star Trek" Blu-rays, MediaSmart 4.1.4229 played "Speed" with poor video.
So, it appears that any specific version of HP MediaSmart DVD software will play old Blu-rays successfully, and will then subsequently fail to play more advanced, more recent Blu-rays. After that version fails to play the more advanced Blu-rays, that version will play the old Blu-rays, not as flawlessly as before, but rather with poor video quality or not at all.
I have read many threads on the HP forums and on other forums about people having trouble playing Blu-ray DVDs on a wide variety of HP computers. I went back to the specifications of my HP computer, and I found the following disclaimer about that computer's Blu-ray capabilities:
As Blu-Ray is a new format containing new technologies, certain disc, digital connection, compatibility and/or performance issues may arise, and do not constitute defects in the product. Flawless playback on all systems is not guaranteed. In order for some Blu-ray titles to play, they may require a DVI or HDMI digital connection and your display may require HDCP support. HD-DVD movies cannot be played on this Desktop PC. Some HD DVD and Blu-ray advanced features may not be supported. CPU power is dedicated to support HD DVD and Blu-ray playback functions. It is recommended that you close all other applications before and during HD DVD and Blu-ray playback. HD DVD and Blu-ray movies will only play through the HD DVD and Blu-ray player software. Advanced Access Content System (AACS) keys are integrated into your PC for copy protection purposes. Occasional renewal of the AACS key is required, and easily done by connecting to the internet.
I believe that I have gone way above and beyond ordinary diligence, to try to get my computer to play Blu-ray DVDs. The disclaimer states that certain issues may arise and that flawless Blu-ray playback is not guaranteed for all systems. But certainly my frustrating experiences, and the frustrating experiences of others, go way beyond the leeway given by HP's disclaimer, do they not? Has anyone thought about the possibility of a class-action lawsuit against HP?

In "Device Manager", under "DVD/CD-ROM drives", I see the following:
hp BDDVDRW CH20L
I click on "hp BDDVDRW CH20L", and I see several tabs.
In the tab marked "Driver", we have the following:
Driver Provider:   Microsoft
Driver Date:           6/21/2006
Driver Version:     6.1.7601.17514
Digital Signer:      Microsoft Windows
In that same tab, clicking on "Driver Details" gives us the following:
Driver files:      C:\Windows\system32\DRIVERS\cdrom.sys
Provider:           Microsoft Corporation
File version:    6.1.7600.16385 (win7_rtm.090713-1255)
Copyright:       Microsoft Corporation. All Rights Reserved.
Digital Signer:   Microsoft Windows
I think that, back in October 2014, when this Blu-ray issue first came up, I updated the driver. That may be why you see the following different versions :
6.1.7601.17514
6.1.7600.16385 (win7_rtm.090713-1255)
So, how would I update the firmware? To what version should I update the firmware?

I Mini with an i7 processor. I would like to use Boot Camp to install windows based CAD software on my MAC. Would it be better to use a plugin external hard drive to load my software on and if so what hard drive would you recommend?

I Mini with an i7 processor. I would like to use Boot Camp to install windows based CAD software on my MAC. Would it be better to use a plugin external hard drive to load my software on and if so what hard drive would you recommend?

Thank you for your quick response. I can then use a ZIP drive for data storage. I want to keep as much of my hard drive free of data as possible.

My HD died on my iMac. I replaced it and lost everything that was on it. I found my source disks from my original purchase for Final Cut Express HD 3.5. I now have Maverick ISO and it will not let me load my software so I can continue my film work. ???

My HD died on my iMac. I replaced it and lost everything that was on it. I found my source disks from my original purchase for Final Cut Express HD 3.5. I now have Maverick ISO and it will not let me load my software so I can continue my film work. How do I get it too recover it without paying for it again since I paid for it already and have projects in progress that need to be completed?

1) Partition your hard drive or add an external drive and install Snow Leopard (with the Optional Rosetta) into it and then you can dual-boot (System Preferences:Startup Disk) into Snow Leopard and run FCE 3.5 there.
2) Use one of the following methods to install FCE 3.5 into Mavericks:
a) Pacifist: http://www.charlessoft.com/
b) Jeremy Johnstone's Terminal method: http://www.jeremyjohnstone.com/blog/2012-03-11-installing-final-cut-pro-studio-2 -0-on-mac-os-x-10-7-lion.html
Reports on this forum seem to confirm that Final Cut Studio 2 will continue to operate in Mavericks once it is functionally installed, albeit some plug-ins may fail to function. FCE 3.5 is the same generation as FCS2, and presumably will continue to operate in Mavericks, as well.

I bought the company unlocked phone from apple store Canada. It was originally loaded with software 4.2 and was working fine here in SaudiArabia. Yesterday I updated with IOS 5.0.1. Now it is showing that sim is not valid. The same sim works in other p

I bought the company unlocked phone from apple store Canada. It was originally loaded with software 4.2 and was working fine here in SaudiArabia. Yesterday I updated with IOS 5.0.1. Now it is showing that sim is not valid. The same sim works fine in other phones.

Here's and update on my problems and here are are some screen shots of the types of problems I've been having since the v5.0.1 update. Keep in mind these are native apps and I have tried the rebuild phone crap many times, nothing helps.
This is screen shot of a what happened when I tried to use my camera one day, both the front and back cameras were all black. I had to power cycle the phone to get rid of this problem. The cameras appeared to be working correctly, I could focus and zoom but it was all black.
Here is an image of what happened when I searched for something in a map. This is after I picked the choice I wanted, the keyboard disappeared but the list didn't. I had to force close the app and restart it for this problem to go away. Who knew five bars on ATT was possible.
And finally this is the messaging app, although you would not know it. I had to return to home screen (after a long pause for it to process the button push) and return to the messaging app. This happens all the time with the messaging app and the notifications sounds drive me crazy. If i'm using the phone, say browsing the web and I get an incoming message its almost 100% of the time the messaging app will screw up. The sound will play at the wrong time or not at all, message will show up in notifications and diasapear in message app or Ill have a problem like this:

When I try to down load the software i get "this link needs to be opened with an application"

help please
when I try to down load the software i get "this link needs to be opened with an application"
What kind of application do I need to choose?

Lynda in woodstock this error occurs if the AAM Detect Plug-in is not loaded. Please try using a different web browser or installing through the Creative Cloud Desktop application. You can find more details at Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html.

A small logo of Dolby Digital or DVD-Audio missing when play DVD-A or DVD software with SPDIF

I can see these logo before when I play DVD-A or play DVD movies with SPDIF enabled on DVD software such as PowerDVD. And now it's gone, when play SPDIF, it does not show these logos at all.
I appreciate any advises.
Thanks

for the logos, someone asked how to know what kind of signal his card was decoding. I provided 2 examples:
http://shingoyab.free.fr/creative/dolby.jpg
http://shingoyab.free.fr/creative/dts.jpg
if you don't see them but hear correct surround sound, don't bother. On some situation (not determined which one though) the logo disapears. I lost them some rare times. Last times was when listening to some DD music when programming small homeworks in OpenGL.

Loading DVD software on a notebook

Similar Messages

Maybe you are looking for