Loading edge files breaks on slower connections.
When testing on a slower network throttle using Google chrome Inspector >> device toggle... the loading of the edge packages gives errors, and stops the page. Telling me there is a problem with the bindElementAction or SymbolData, but it doesnt seem to be coded badly. To get through, I have to hit the refresh button a number of times. See the picture attached. Maybe a staff member can give me a solution or suggestion?
Hi Miguel,
In the time that the experts reply, see google chrome devtools - jQuery's jquery-1.10.2.min.map is triggering a 404 (Not Found) - Stack Overflow
Thanks,
Preran
Similar Messages
-
I have racked my brain and done everything that I know to do for about two weeks now. I am setting up a new system at our fire department and I am having the worst luck with getting the workstations to login to the domain controller with roaming
profiles. It keeps telling me that the roaming profile could not be loaded because of a slow connection. These are workstations that are connected directly to the switch that the DC is connected to. I have tried multiple connections regarding
the layout (DC into the router, router into the switch). The router is a Cisco RV220W. I have two VLANS, one for public and one for private domain. The Private VLAN has DHCP turned off since I am providing it through the DC. I currently
have a connection from the Private VLAN going to the unmanaged switch that the workstations and server are plugged into.
The server is a Dell PowerEdge R420 that has 6 NIC ports (1 dual port and 1 quad port). I have a virtual switch setup on Hyper-V for an external port (let's say Card 2 Port 3) that is assigned to the WS 2012R2 Domain Controller. The DC can see
the internet fine and the workstations can connect to the shared folders on the server. I can retrieve files by just using the computer name or FQDN. The DC is also running DNS and DHCP. The DNS has the _msdcs setup from when I installed
the active directory role. I have attempted to assign static IP addresses to the workstations:
IP: 10.0.0.80
Subnet: 255.255.255.0
IPV4 Gateway: 10.0.0.1
IPV4 DNS: 10.0.0.12
I've attempted "append the specific DNS suffix", I've "registered the connection in DNS", I've used "use this connections suffix in DNS registration".
The server is assigned:
IP: 10.0.0.12
Subnet: 255.255.255.0
IPV4 Gateway: 10.0.0.1
IPV4 DNS: 10.0.0.12
The DNS entries have forwarders that forward to my ISP DNS servers for lookup
I've enabled and disabled DHCP, I've installed a new VM just to create another DC to make sure that I didn't goof up when I created it.
I've lost my patience with this project and am sinking fast. Can someone please offer some advice as to what I've done wrong? I've created this exact scenario at work many times but, I've never done it with Windows Server 2012. Is this
possibly something to do with the Dell PowerEdge server (Generation 12) with the SR-IOV? I am going to attempt to work on it some more tomorrow when I get over there. I think there may be an issue with the SR-IOV not being enabled on the machine
through the Dell Bios. Would the SR-IOV really cause the workstations to report a slow connection? When I login at the domain controller the roaming profiles and folder redirection work fine so, I know the GPO settings are correct. I don't
have "ignore slow connections" or any of those GPO's set. I need to get it working the correct way so, I didn't want to fool the server when there is another underlying problem. Any help that someone can offer, I am more than willing
to listen. If you need more information, please ask.
Thanks,
JaySo, I've managed to research this some more since Thursday and I've come to the conclusion that Hyper-V does a horrible job of supporting Qualcomm NIC cards. That's the only thing I can conclude as far as where the issue is originating. I've read many
post and walkthroughs but nothing that has helped. The issue wasn't with any settings in the domain controller. The issue was that there really is a slow connection originating at the domain controller that is a VM and has network connectivity through the
virtual switch from Hyper-V. So, next question is, how do I get the DC to have better connectivity through the NIC that Hyper-V won't give it? If hyper-v would allow passthrough, this would be so much simpler. VM-ware is looking really good at this point.
Im disappointed in MS right now. -
4.2.3/.4 Data load wizard - slow when loading large files
Hi,
I am using the data load wizard to load csv files into an existing table. It works fine with small files up to a few thousand rows. When loading 20k rows or more the loading process becomes very slow. The table has a single numeric column for primary key.
The primary key is declared at "shared components" -> logic -> "data load tables" and is recognized as "pk(number)" with "case sensitve" set to "No".
While loading data, these configuration leads to the execution of the following query for each row:
select 1 from "KLAUS"."PD_IF_CSV_ROW" where upper("PK") = upper(:uk_1)
which can be found in the v$sql view while loading.
It makes the loading process slow, because of the upper function no index can be used.
It seems that the setting of "case sensitive" is not evaluated.
Dropping the numeric index for the primary key and using a function based index does not help.
Explain plan shows an implicit "to_char" conversion:
UPPER(TO_CHAR(PK)=UPPER(:UK_1)
This is missing in the query but maybe it is necessary for the function based index to work.
Please provide a solution or workaround for the data load wizard to work with large files in an acceptable amount of time.
Best regards
KlausNevertheless, a bulk loading process is what I really like to have as part of the wizard.
If all of the CSV files are identical:
use the Excel2Collection plugin ( - Process Type Plugin - EXCEL2COLLECTIONS )
create a VIEW on the collection (makes it easier elsewhere)
create a procedure (in a Package) to bulk process it.
The most important thing is to have, somewhere in the Package (ie your code that is not part of APEX), information that clearly states which columns in the Collection map to which columns in the table, view, and the variables (APEX_APPLICATION.g_fxx()) used for Tabular Forms.
MK -
Hi folks,
I tried downloading the latest OS X Mountain Lion and [after a long time... I have a slow connection] I got an error message ... We could not complete your purchase The product distribution file could not be verified. It may be damaged or was not signed.
Everytime I retry or continue the download I just keep getting the same error message!!!
What can I do to get my product?
PMThe only thing that worked for me was to boot in safe mode.
Power down. Then press power button and hold 'shift' key until grey screen with progress bar appears... Once booted and logged in just open safari and browse to applestore.
No trouble at all once I did this.
Reminder: create full backup before you upgrade OS
Hope it helps. -
Safari is slow to load pages ad even says not connected to internet but i am?
safari is slow to load pages and even says not connected to internet but i am?
How much free space on the startup disk?
Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure you have a minimum of 15% free disk space.
If you have anti virus software installed, that could be a factor.
Try troubleshooting third party plugins. Safari: Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues
Do you have Little Snitch installed? -
Loading ASCII files - too slow
I have script for loading ASCII file into database.
First I use SQL loader to load data into temporary tables. After
that I start procedure which does some linking of loaded data
which is nessesary.
After that I move data from temp tables to main tables.
There are 7 main tables, two of them have 30,000,000 rows, other
are smaller. Tablespace has 12 Gb, and it is localy managed.
Problem is, that few days ago load of one ASCII file with 10,000
rows took 10 seconds to finish, but now it takes 90 seconds.
Problem is not SQL loader, but procedure for linking and coping.
But why it is so slow now?
Nothing is changed, we started a large load (some 6000 ASCII
files). When we started it was fast (10 sec/file), now it's slow
(90 sec/file).
I also noticed that database process uses 40% of CPU. When it
was working fine it took 10-15 % of CPU time.
Also, when everithing was working fine used space in datafiles
was growing, but now it seams to be on same level al the time.
PCTFREE for tables is 10 and PCTUSED is 60.
Can anybody help, please?Is this CBO or RBO ? I am curious -- are you building stats
during data loads ? Might want to review your strategy either
way.
Are there any concurrent events happening on either the host or
the rdb during the most recent (slower) loads that might not
have been occuring before ? Eg: heavy queries against the tables
occuring during data load events ?
Is your 12g tablespace split over drives ? Can't help but wonder
what kind of fragmentation is occuring on these tables and
underlying storage ? 30,000,000 rows per tab is alot of rows.
If you are practicing datawarehouse forced reload (ETL) of the
tables then I would be inclined to truncate target tables first
(including storage) to allow Oracle to use some 'smarts' as it
re-allocated extents for your many millions of rows.
Generally speaking, update degradation such as you are
experiencing can be attributed to bottlenecks in TBSs and
datafiles that are choking from write activity. I have resolved
similar issues through partitioning and truncating.
Hope this helps, RP.
I have script for loading ASCII file into database.
First I use SQL loader to load data into temporary tables. After
that I start procedure which does some linking of loaded data
which is nessesary.
After that I move data from temp tables to main tables.
There are 7 main tables, two of them have 30,000,000 rows, other
are smaller. Tablespace has 12 Gb, and it is localy managed.
Problem is, that few days ago load of one ASCII file with 10,000
rows took 10 seconds to finish, but now it takes 90 seconds.
Problem is not SQL loader, but procedure for linking and coping.
But why it is so slow now?
Nothing is changed, we started a large load (some 6000 ASCII
files). When we started it was fast (10 sec/file), now it's slow
(90 sec/file).
I also noticed that database process uses 40% of CPU. When it
was working fine it took 10-15 % of CPU time.
Also, when everithing was working fine used space in datafiles
was growing, but now it seams to be on same level al the time.
PCTFREE for tables is 10 and PCTUSED is 60.
Can anybody help, please? -
Apple TV Slow Connection, Authorizing, Loading, Failure to Connect To iTunes
Very erratic problem. Sometimes say's cannot connect to iTunes store, try again later. Excessive Authorizing times and loading times estimated in hours, slow loading of artwork. While experiencing the problem I tried to AirPlay from iPad which was downloading fine, with no success. I have 75mb up and down Verizon Fios which consistantly tests to over 80mb on iPad using app and iMac using network tests on Safari, even at time of problem. Network speed test on Apple TV shows OK. I use an AirPort Extreme (latest version) in bridge mode to a Verizon router with WiFi off, which I tried on 2.4 and 5 Ghz with the same results. This problem is very annoying considering it is the only means by which I view television. Last time I had the problem I reset the Apple TV, logged out and back into iTunes, tried the plug and unplug thing all in various order with mixed results only to have the problem return the next evening.
Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.
The following article(s) may help you.
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings
Sources of Interference
Wifi Diagnostic Software (for Mac users)
You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues. -
When the Magic mouse is connected to the macbook, loading every website gets so slow.
Hello!
When I connect the Magic mouse to my Macbook pro, loading any website gets so slow, it takes a lot of time to loads. When I disconnect the Magic mouse from the Macbook the loading of any website gets fast and normal.
Nothing is installed in my Macbook, I've bought this mac before 3 days, and bought the mouse yesterday.
I'm using the bluetooth Magic mouse.Hello,
Click the Apple icon in the top left corner, Then System Preferences..., From the menu bar select Help, Write
Set up a wireless keyboard and mouse,
Follow the instructions! -
Error playing movie on slow connection
I get the following error when I load a movie with slow connection:
Cannot read property 'symbolData' of undefined
I've managed to find the cause:
Movie_edgeActions.js file is invoked with autonomous function as soon as it loads. Unfortunately, the Movie_edge.js file is usually much bigger than the edgeActions file (we're talking about dozens of kbs for the edge file compared to 3, maybe 5 kb for the edgeActions file). So on slow connection, the actions file is executed before the edge file is even loaded into the browser.
Very easy to simulate:
Open the movie with fiddler running as a proxy.
Use fiddler "simulate modem speeds" and "Disable Caching" options (Rules->Performance).
I think it's a serious bug. It's very likely to happen when surfing on 3G...
Until it is fixed (I'd love to have a due date estimation), I'm planning on manually changing the autonomous function call, and call it myself when both files are loaded. I'll try to cope with it myself, but if anyone has already done it, or know how I should do it, I'd be happy to get some guidance.
Addition: I've changed the anonymous function to a named function and I call it on AdobeEdge.bootstrapCallback (I did something similiar to this post).
It works great with normal connection, but on slow connection the callback is never called. Moreover, I see the edge.js file being transfered on fiddler with http status 200, I also see it in chromes network monitor with status 200, but it doesn't get added to the scripts list on chrome developer tools. So I think the problem is actually in the preloader itself. I'll try working around it somehow...
Last thing regarding performance - is there a plan to include in the publish an option to create the entire movie (preloader, actions and edge) as a single minified js file?
We have an implementation that coordinate 5 different movies, which implies loading 15 different js files (or at least 10, because I can integrate the preloaders into my own js file). As you probably understood, on 3G it can mean lot of times until the entire application is loaded.
Thanks,
LiorEDIT: I reverted the changes in the actions file (it works also with autonomous function).
The AdobeEdge.yepnope.errorTimeout is declared inside AdobeEdge.requestResources function in the preloader, so I declared this function in my main html, so it won't be overriden by any of the generated preloaders
What do you mean "so I declared this function in my main html".
Can you help me by providing samples of your code? This errorr is pissing me off!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Cheers. -
Elements do not show up in edge file but they do in HTML file; no errors occured
I am a senior in college working on building a website for a fictional company for a year-long thesis graphic design project. In my class last semester, I learned how to use Edge Animate and created an 11 page website without any trouble. I had always kept the files saved to my flash drive, and kept a backup on my personal laptop as well as on my external hard drive. There was also a backup of the files on a disc that I turned into my professor in mid-December. All of these files worked fine at the time.
In early January, I wanted to make changes to the website so I installed a trial version of Edge Animate on my laptop. When I opened any of the edge files from any of the backups, the stage was blank and the animations did not show up on the timeline. The elements of the website still show up in the Library but they are no longer arranged on the stage. When I got back to school at the end of January, I tried opening the files on the school computers and had the same problem. I asked my professor to try the file that was saved to the disc and he encountered the same issues on his computer. All of these computers are either iMacs or Macbook Pros.
I have not recieved any error messages and did not do anything to corrupt the files or save over them. I am able to open the html files in a browser with no issues; all animations and images work fine. The only change I can think of is that Edge may have been updated over break and when I installed the trial version I installed a newer version, and for some reason the new version of the program could not properly load my project that I started on a older version in October or November of 2013.
I am happy to upload the files but I am unsure how to do that. Please let me know if there is a way to resolve this issue, or will I have to start over?
Thank you!Try to clear your preference and restart your Animate.See if that fixes your problem
http://helpx.adobe.com/edge-animate/kb/restore-preferences-edge-animate.html
If that does not work see if there is a lloopback address lookup.
Check out the correct answer in this post to fix that http://forums.adobe.com/message/6116991
Let us know if this fixed your issue -
Ever since upgrade to Mavericks I have been having problems which are too numerous to mention. I finally found a program from a UCBerkley professor called Pacifier which indicated 4000+ of 400,000+ files and folders did not install. I was unable to go further to try to fix everything because Pacifier can't find ANY Apple installers on my HD. It recommended I download the Mavericks installer without reinstalling to continue; however, after having done so (very slow connection; takes 30 hours to download) and although the installer appears in apps while downloading it disappears and NO Apple installer packages can be found on my hard drive. I tried to download Yosemite once and it indicated my system wasn't eligible for the upgrade. Its' download time was similar to Mavericks; 28+ hours.
I am using a Macbook Pro mid-2012 version OS X 10.9.5 (13F34); Processor 2.5 GHz Intel Core i5; Memory 4 GB 1600 MHz DDR3; Graphics Intel HD Graphics 4000 1024 MB.
Regardless of how many files and apps I remove my memory is being eaten up to the point I can hardly do anything at all. There are no civil words for how frustrated I am. Someone please help me.
Thanks,
JJInstall Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
This should restore the version of OS X originally pre-installed on the computer. -
Satellite U400 - Slow connection on Windows 7
Hi
I use Satellite U400.
And I can't install wireless driver I dont know why. I open the file and it just won't install but still I think I have the latest drivers for my wireless network,
but my serious question was: why I drop and limit bandwith with windows 7 but not with winXP?
I have 1Mbit/s but example I want to download firefox go to their website's and then it shows between 50 and 70Kb/s but sometimes it gets to my normal max high 120Kb/s, and I saw on google that alot of people have this issue.
And sometimes some website are not loading or I just got error because of so slow connection that websites just turn off :(, never happend before.
plz someone help - any suggestions plz?> what kind of forum is this? no help for more then one 1 week , more then 10 days now ?
What are you expecting? This is a user to user forum if someone would like to help you then he will post in your thread.
In most cases such themes has been discussed a lot of time here maybe you should not wait only for someone but should use an advanced search option and could search and read in similar threads for possible solutions
Regarding your issue:
> i do have the latest updates and still nobody from you tried to help me to get a fix , why dont you guys belive it? when i said look at google.com and write windows 7 wireless probblem or slow down my wireless, this is a KNOWN issue with windows 7 .
Firsty you said that you are sure it's Win 7 issue
>i have asked around everywhere and they all say it is NOT windows 7 issue it must be the manufacter driver issue .
Now you are saying it;s notebook issue....
So what is your possition now????
How it could be a manufacturer issue if the speed is faster using WIn XP??? For me it make no sence...
However, I googled a little bit an found this:
Tweaking Windows 7 for Faster Online Connections
http://www.brighthub.com/computing/windows-platform/articles/58522.aspx
You can also try to speed up the IE 8
For that use the command: regsvr32 actxprxy.dll
This should be typed in RUN
Then reboot the notebook. -
Just moved to ISP PLUSNET and now loading web pages is dead slow
Just moved to ISP PLUSNET and now loading web pages is dead slow.
Like loading google will sometimes take 30 seconds to 1 minute but it used to load in a fraction of a second on my previous ISP.
Sometimes a new URL will take over a minute so I hit Stop Loading This Page and then try again and sometimes it might load instantly, or if not, it might continue to just drag on again.
It's so frustrating it's like being back on dial-up connection - but worse.
It feels like PLUSNET have put something on my Mac to slow it down.
PLUSNET has a restriction on how much I can use per month, which my previous ISP did not have, but according to PLUSNET's usage checker I am nowhere near the max, ie, I am allowed 10GB per month but the checker is showing I have used less than 100 MB so far this month.
I wonder if the PLUSNET usage checker is slowing down my usage coz it's really noticeable that it has only started to run slow since I moved to PLUSNET.
When I run a broadband speed check it always shows the feed coming in at around 5500 kbps or so which should be OK.
PLUSNET told me to go through their test page and I got to the part where it says install a Virus checker and an Adware checker but I'm not sure which ones to use coz I heard some of those checkers are themselves plants that infect you with a virus or keystroke logger.
Also I have Block Pop UP Windows running on Safari but yesterday a window popped up so that blocker seems to have been compromised somehow.
I have 17GB available on my HD of a total of 38GB.
Can anyone help me with this problem please?(First, if yours is an Intel Mac, check that Safari is not running in Rosetta, which is enough to slow it to a crawl. If you are running Snow Leopard, run Safari in 32 bit not 64 bit.)
Adding DNS codes to your Network Settings, should gives good results in terms of speed-up:
Open System Preferences/Network. Double click on your connection type, or select it in the drop-down menu. Click on TCP/IP and in the box marked 'DNS Servers' enter the following two numbers:
208.67.222.222
208.67.220.220
(An explanation of why that is both safe and a good idea can be read here: http://www.labnol.org/internet/tools/opendsn-what-is-opendns-why-required-2/2587 /
Open DNS also provides an anti-phishing feature: http://www.opendns.com/solutions/homenetwork/anti-phishing/ )
Wikipedia also has an interesting article about Open DNS:
http://en.wikipedia.org/wiki/OpenDNS
Whilst in System Preferences/Network you should also turn off 'IPv6' in your preference pane, as otherwise you may not get the full speed benefit (the DNS resolver will default to making SRV queries). If you want to know what IPv6 is:
This is Apple's guidance on iPv6:
http://docs.info.apple.com/article.html?path=Mac/10.5/en/8708.html
Click on Apply Now and close the window.
Restart Safari, and repair permissions.
If that didn't do it, then try this as well:
Empty Safari's cache (from the Safari menu), then close Safari.
Go to Home/Library/Safari and delete the following files:
form values
download.plist
Then go to Home/Library/Preferences and delete
com.apple.Safari.plist
Repair permissions (in Disk Utility).
Start up Safari again, and things should have improved.
More useful information here:
http://guides.macrumors.com/SpeedupSafari
Less likely, but possible, is that the slowness is caused by a Trojan such as the one called 'DNSChanger' or 'OSZ.RSPlug', which can alter the DNS settings of your network connection. This particular Trojan can be inadvertently installed if you have come across certain Quicktime movies where got a window stating that you have to download and install a particular codec in order to see the video.
If you have agreed to that installation, your system can be infected and your DNS settings altered, which results in your system using the wrong DNS servers, which can slow web surfing to a crawl.
This can be fixed by downloading and running a freeware utility called DNSChanger Removal Tool which you can download from here:
http://www.versiontracker.com/dyn/moreinfo/macosx/33696
Once you have run that utility you have to re-boot your Mac, then reset Safari, and re-enter your DNS settings in System Preferences/Network. -
SQL Nexus - ReadTrace - Cannot able to load Trc file
When loading the TRC file getting the following error.
Windows 7 Sp1
SQL 2012 Developer Edition (Microsoft SQL Server 2012 - 11.0.2100.60 (Intel X86) )
Here is the ReadTrace Log
03/13/15 13:53:05.247 [0X00001F94] Attempting to cleanup existing RML files from previous execution
03/13/15 13:53:05.248 [0X00001F94] Using extended RowsetFastload synchronization
03/13/15 13:53:05.249 [0X00001F94] Establishing initial database connection
03/13/15 13:53:05.249 [0X00001F94] Server: SQL2012
03/13/15 13:53:05.250 [0X00001F94] Database: sqlnexus
03/13/15 13:53:05.250 [0X00001F94] Authentication: Windows
03/13/15 13:53:05.332 [0X00001F94] Using SQLOLEDB version 11.0.2100.60
03/13/15 13:53:05.501 [0X00001F94] Connected to SQL Server Version, Major: 11, Minor: 0, Build: 2100
03/13/15 13:53:05.501 [0X00001F94] Creating or clearing the performance database
03/13/15 13:53:06.928 [0X00001F94] Processing file: C:\Temp\SQLDiagOutput\SQL2012_SQLDIAG__sp_trace.trc (SQL 2012 / SQL Azure*)
03/13/15 13:53:06.928 [0X00001F94] Validating core events exist
03/13/15 13:53:06.929 [0X00001F94] Validating necessary events exist for analysis
03/13/15 13:53:06.929 [0X00001F94] WARNING: The following trace events were not captured: [SP:StmtStarting, SP:StmtCompleted, Showplan Statistics]. Review the help file to ensure that you have collected the appropriate set of events and columns for your intended
analysis.
03/13/15 13:53:06.946 [0X00001F94] Events Read: 1000 Queued: 599 Processed/sec: 213
03/13/15 13:53:06.959 [0X00001F94] Events Read: 2000 Queued: 1285 Processed/sec: 377
03/13/15 13:53:06.968 [0X00001F94] Events Read: 3000 Queued: 2285 Processed/sec: 376
03/13/15 13:53:06.991 [0X00001F94] Events Read: 4000 Queued: 3285 Processed/sec: 371
03/13/15 13:54:23.751 [0X000010A4] ERROR: Worker message stream was expected and does not exist for worker pool id: 0
03/13/15 13:54:23.694 [0X00001534] ERROR: Unable to create worker thread failed with operating system error 0x00000008 (Not enough storage is available to process this command)
03/13/15 13:54:23.771 [0X00001534] ERROR: Worker stream initialization failed.
03/13/15 13:54:23.771 [0X00001534] ERROR: Worker message stream was expected and does not exist for worker pool id: 0
03/13/15 13:54:23.776 [0X00000970] ERROR: Unable to create worker thread failed with operating system error 0x00000008 (Not enough storage is available to process this command)
03/13/15 13:54:23.776 [0X00001B94] ERROR: Unable to create worker thread failed with operating system error 0x00000008 (Not enough storage is available to process this command)
03/13/15 13:54:23.776 [0X00001CEC] ERROR: Unable to create worker thread failed with operating system error 0x00000008 (Not enough storage is available to process this command)
03/13/15 13:54:23.776 [0X00001630] ERROR: Unable to create worker thread failed with operating system error 0x00000008 (Not enough storage is available to process this command)
03/13/15 13:54:23.776 [0X00000B34] ERROR: Unable to create worker thread failed with operating system error 0x00000008 (Not enough storage is available to process this command)
03/13/15 13:54:23.776 [0X00001588] ERROR: Unable to create worker thread failed with operating system error 0x00000008 (Not enough storage is available to process this command)
03/13/15 13:54:23.776 [0X00001804] ERROR: Unable to create worker thread failed with operating system error 0x00000008 (Not enough storage is available to process this command)
03/13/15 13:54:23.776 [0X00001148] ERROR: Unable to create worker thread failed with operating system error 0x00000008 (Not enough storage is available to process this command)
03/13/15 13:54:23.776 [0X0000073C] ERROR: Unable to create worker thread failed with operating system error 0x00000008 (Not enough storage is available to process this command)
03/13/15 13:54:23.776 [0X00001E7C] ERROR: Unable to create worker thread failed with operating system error 0x00000008 (Not enough storage is available to process this command)
03/13/15 13:54:23.776 [0X00000970] ERROR: Worker stream initialization failed.
03/13/15 13:54:23.776 [0X00001B94] ERROR: Worker stream initialization failed.
03/13/15 13:54:23.776 [0X00001CEC] ERROR: Worker stream initialization failed.
03/13/15 13:54:23.777 [0X00001630] ERROR: Worker stream initialization failed.
03/13/15 13:54:23.777 [0X00000B34] ERROR: Worker stream initialization failed.
03/13/15 13:54:23.777 [0X00001588] ERROR: Worker stream initialization failed.
03/13/15 13:54:23.777 [0X00001804] ERROR: Worker stream initialization failed.
03/13/15 13:54:23.777 [0X00001148] ERROR: Worker stream initialization failed.
03/13/15 13:54:23.777 [0X0000073C] ERROR: Worker stream initialization failed.
03/13/15 13:54:23.781 [0X00001E7C] ERROR: Worker stream initialization failed.
03/13/15 13:54:23.781 [0X00000970] ERROR: Worker message stream was expected and does not exist for worker pool id: 0
03/13/15 13:54:23.781 [0X00001B94] ERROR: Worker message stream was expected and does not exist for worker pool id: 1
03/13/15 13:54:23.781 [0X00001CEC] ERROR: Worker message stream was expected and does not exist for worker pool id: 0
03/13/15 13:54:23.781 [0X00001630] ERROR: Worker message stream was expected and does not exist for worker pool id: 0
03/13/15 13:54:23.781 [0X00000B34] ERROR: Worker message stream was expected and does not exist for worker pool id: 0
03/13/15 13:54:23.781 [0X00001588] ERROR: Worker message stream was expected and does not exist for worker pool id: 0
03/13/15 13:54:23.781 [0X00001804] ERROR: Worker message stream was expected and does not exist for worker pool id: 0
03/13/15 13:54:23.781 [0X00001148] ERROR: Worker message stream was expected and does not exist for worker pool id: 0
03/13/15 13:54:23.781 [0X0000073C] ERROR: Worker message stream was expected and does not exist for worker pool id: 0
03/13/15 13:54:23.781 [0X00001E7C] ERROR: Worker message stream was expected and does not exist for worker pool id: 0
03/13/15 13:54:23.792 [0X0000073C] ERROR: Unable to create worker thread failed with operating system error 0x00000008 (Not enough storage is available to process this command)
03/13/15 13:54:23.792 [0X0000073C] ERROR: Worker stream initialization failed.
03/13/15 13:54:23.792 [0X0000073C] ERROR: Worker message stream was expected and does not exist for worker pool id: 0
I have lot of Disk space to accommodate to load TRC file, still not sure why we are getting the above message.
Any help much appreciated.Hi Vijay313,
SQL Nexus provides you the option of breaking down the activity of each SPID into individual .trc files but they can only be directed to the %TEMP%\RML folder on your machine. So the error message might occur that you don’t have sufficient disk space to accommodate
all the session specific Trace files (containing a few hundred GBs data at times) in the TEMP directory.
To work around this issue, you can choose one of below options.
1. Change the %TEMP% environment path on your machine to a different drive.
2. Use the ReadTrace.exe (highly recommended) to generate the .trc files in the required path.
3. Another option that cannot be controlled from SQL Nexus is the ability to add SPID, Hostname and Application filters while importing the data.
For more details , please review the following link.
http://troubleshootingsql.com/tag/data-analysis/
Thanks,
Lydia Zhang
Lydia Zhang
TechNet Community Support -
Error With loading XML file.Help me
Hi!
I am trying to make an mp3 player for my web site but I am
having a little problens and I hope you can help me out.
It is a xml driven mp3player. I have a mp3player.as file and
a songs.xml file. Inside my flash movie I only have #include
"mp3player.as".
Here is my mp3player.as code :
[CODE]
//Setup Sound Object
var s :Sound = new Sound();
s.onSoundComplete = playSong;
s.setVolume(75);
//Array of sounds
var sa:Array = new Array();
//Current Playing Song
var cps : Number = -1;
//Load the XML into a xml file
var xml :XML = new XML();
xml.ignoreWhite = true;
xml.onLoad = function()
var nodes : Array = this.firstChild.childNodes;
for(var i=0;i<nodes.length;i++)
sa.push(nodes
.attributes.url);
playSong();
xml.load("mp3player.xml");
// Play mp3 file
function playSong() :Void
if(cps == sa.length -1)
cps = 0;
s.loadSound(sa[cps],true);
else
s.loadSound(sa[++cps],true);
[/CODE]
And here is my songs.xml file :
[CODE]
<?xml version="1.0" encoding="UTF-8"?>
<songs>
<song url="music\setsite.mp3" />
<song url="music\Soul Magic - Soul Magic.mp3" />
<song url="music\Technotronic - NRG Flow.mp3" />
</songs>
[/CODE]
Everytime I test my movie I have this msg :
Error opening URL
'file:///C|/Documents%20and%20Settings/Administrator/My%20Documents/Web%20Sites/site%20MA IO%202007/undefined'
What is wrong with my code?
When I comment this line xml.load("songs.xml") my movie runs
fine.But I cant fix it..
thank youOthers here in the forums know more about the Sound class
than I do... I haven't used it so much. You are using the
'streaming' type of sound with the isStreaming flag set to true
which means that it starts to play before its fully downloaded. So
on a slow connection I presume it could play and stop in the same
way that the timeline on a movie will pause playing if the rest of
it has not downloaded yet.
For a streaming sound, I guess you could get around this by
implementing a partial preload by using s.stop() after issuing the
s.loadSound command. Then do a "regular" preloader style checking
s.getBytesLoaded vs. s.getBytesTotal ... to a percentage (you could
even monitor the speed over 5-10 seconds to determine an
appropriate level of buffering...maybe) and then use s.start()
again.
That's how I'd tackle it, but like I said others here know
more about this, and perhaps they'll have better ideas. There
appear to be some quirks with the Sound class based on comments in
the flash 8 livedocs...
Maybe you are looking for
-
WiFi not working since upgrading to IOS 7.1.1 on iPhone 4
Can't connect to any WiFi since the IOS upgrade. Ive reset networks, turned airplane mode on/off and powered phone off and on. Nothing works! Is this a known bug? Any fixes available?
-
Pages not loading correctly anymore
Running firefox 7.01 on win7 64 bit. I just recently got a popup asking me whether I would like to see additional information from when I click on a link (on my nas) or not. I selected no. However, now I do not get any confirmation dialogs anymore an
-
In imovie (8.0.6) i click share, then export movie as quicktime movie, choose a folder then click save and it starts working. At the end of job movie is not there but hard disc space is gone. So I'm keep loosing space but not getting movie. Please ca
-
Can same flash drive be used on mac and pc?
can same flash drive be used on mac and pc?
-
Maybe i overlooked this, but since i started uploading my ideas files to creative cloud, they appear to be named untitled#.idea (# being the number). And i don't find a way to change this on the regulare file manager...