Loading emoji since 10.10.3 very slow and no different skin tones

Hi there,
since I upgraded my MacBook Pro late 2013 to Yosemite 10.10.3 my keyboard lags, when I am trying to access the emojis.
Before upgrading, everything worked fine.
This happens for example when using iMessage or notes.
It takes a few seconds, until the emojis are shown and I get a blank screen with the rainbow wheel:
After the emojis are loaded it lags when I select a simple "smiley". Sometimes I have to select a smiley twice, before it appears in the application used.
Also I can't select the different skin tones as I am used to on iOS 8.3. I get the option to select between different "styles", but they all are the same:
Does anybody else have also this issues and knows a solution? As I am using a lot iMessage on my Mac, it is very annoying.
Thank you a lot!
Kind regards!

Hi all,
I finally found the solution for the issue and wanted to share this with you guys.
I had a very nice chat with Apple Care about this issue but unfortunately all tips like uninstalling third party apps or scanning for malware didn't help.
Even deleting all the caches and check the rights or even the disk did not solve the problem.
I also managed to install the combo update, which I did twice to get sure and also loaded installed the whole Yosemite image from the Appstore.
Don't know why, but then I went into the "Font Book" in Safe Mode and didn't find anything strange. After booting the Mac in Normal Mode I also went into the "Font Book" there I found a lot of duplicate fonts. Don't know where they came from. And what did I find in there?
After selecting "Resolve Automatically", all emoji went back to normal state as on my iPad and iPhone. You can also select one of the duplicate fonts and delete or rename the old version. In my case, I had a version from December 2013 and the new one from March 2015. For testing, I renamed the old version to "__Apple Color Emoji.ttf_", so that it doesn't appear in the "Font Book" anymore.
Hope, this also helps you out!

Similar Messages

Graphic card problem maybe? Since when I have changed the hard drive to my macbook pro and I installed all the new softwares, my mac is very slow and the screen gives crazy pictures,could maybe be the graphic card, does anybody have experienced this?

Graphic card problem maybe? Since when I have changed the hard drive to my macbook pro and I installed all the new softwares, my mac is very slow and the screen gives crazy pictures,could maybe be the graphic card, does anybody have experienced this?

after a restart it works for a time, but always slow. I went to the Applestore this afternoon and the made a check and said it would be the logicboard and they would have to change it for CHF 600 and it would be ready in 10 - 15 days

I downloaded the latest version of adobe flash player 2 versions loaded and now it's very slow and the wheel keeps spinning

My computer is running very slow, and the colored wheel keeps spinning causing pages to load slowly. I recently downloaded adobe flash player. It seems 2 versions loaded. Could this be causing the problem? How can I uninstall these programs? Thank you

Adobe Flash Player
Check Flash Version
Adobe strongly recommends that you first uninstall any previous version of Flash Player, using the uninstaller:
http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-mac-os.html#main_1 0_4
Follow the instructions closely, such as quitting ALL applications first before installing. Repair permissions and restart your computer after the installation is completed.
Authored by Klaus1

My MacBook (10.5.8) is very slow and has significant problems loading will Snow Leopard (10.6.3) help or make my computer slower?

My MacBook (10.5.8) is very slow and has significant problems loading will Snow Leopard (10.6.3) help or make my computer slower?
Also why does my Macbook make so much noise (The noise concerns me because it is so loud it sounds like the laptop will break down or something at any point)?

It depends on your Macbook model how to open the bottom case.
Anyway you need to open up the buttom case or keyboard panel to access the CPU fan like following.
https://www.youtube.com/watch?v=3hHA4DDEvZA
http://www.ifixit.com/Guide/MacBook+Core+2+Duo+Lower+Case+Replacement/537
If you think you can't do that by yourself, you'd better bring it to Apple Store Genius Bar or Authorized Servce Shop to tell them about the problem.

Since upgradation of my i phone 4 to ios7, it has become very slow and hangs frequently.. why!!!!!

since upgradation of my i phone 4 to ios7, it has become very slow and hangs frequently. before upgrade, we were not aware that ios7 is not appropriate for iphone 4. more than 50% memory available ,still slow. getting slower. why?

See this discussion...
https://discussions.apple.com/message/23731048#23731048

Since downloading iPhoto 11 9.2.1 on iMac very slow and crashes

I purchased and downloaded iPhoto 11 9.2.1 from iTunes store. Since then iPhoto is very slow, spinning color wheel on most of the time, and computer freezes and have to restart most time I use iPhoto.

As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

Here are my Etrecheck results....can anyone help me get my computer faster? Problem description: Computer very slow-.and unresponsive EtreCheck version: 2.1.8 (121) Report generated April 16, 2015 at 10:19:42 AM EDT

Problem description:
Computer very slow….and unresponsive
EtreCheck version: 2.1.8 (121)
Report generated April 16, 2015 at 10:19:42 AM EDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Pro (15-inch, Mid 2012) (Technical Specifications)
    MacBook Pro - model: MacBookPro9,1
    1 2.3 GHz Intel Core i7 CPU: 4-core
    4 GB RAM Upgradeable
        BANK 0/DIMM0
            2 GB DDR3 1600 MHz ok
        BANK 1/DIMM0
            2 GB DDR3 1600 MHz ok
    Bluetooth: Good - Handoff/Airdrop2 supported
    Wireless: en1: 802.11 a/b/g/n
    Battery Health: Normal - Cycle count 412
Video Information: ℹ️
    Intel HD Graphics 4000
    NVIDIA GeForce GT 650M - VRAM: 512 MB
        Color LCD 1440 x 900
System Software: ℹ️
    OS X 10.10.2 (14C1514) - Time since boot: 7 days 18:4:45
Disk Information: ℹ️
    APPLE HDD HTS547550A9E384 disk0 : (500.11 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
        Macintosh HD (disk1) / : 498.88 GB (299.54 GB free)
            Core Storage: disk0s2 499.25 GB Online
    MATSHITADVD-R   UJ-8A8
USB Information: ℹ️
    Western Digital My Passport 0748 500.07 GB
        EFI (disk3s1) <not mounted> : 210 MB
        My Passport (disk3s2) /Volumes/My Passport : 499.73 GB (126.16 GB free)
    Apple Inc. FaceTime HD Camera (Built-in)
    Apple Inc. BRCM20702 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /System/Library/Extensions
    [not loaded]    com.quark.driver.Tether (1.1.0d4 - SDK 10.4) [Click for support]
    [loaded]    com.quark.driver.Tether64 (1.1.0d3 - SDK 10.6) [Click for support]
    [not loaded]    com.wdc.driver.1394HP (1.0.11 - SDK 10.4) [Click for support]
    [not loaded]    com.wdc.driver.1394_64HP (1.0.1 - SDK 10.6) [Click for support]
    [not loaded]    com.wdc.driver.USBHP (1.0.11) [Click for support]
    [loaded]    com.wdc.driver.USB_64HP (1.0.0 - SDK 10.6) [Click for support]
Problem System Launch Agents: ℹ️
    [killed]    com.apple.CallHistoryPluginHelper.plist
    [killed]    com.apple.CallHistorySyncHelper.plist
    [killed]    com.apple.gamed.plist
    [killed]    com.apple.Maps.pushdaemon.plist
    [killed]    com.apple.printtool.agent.plist
    [killed]    com.apple.telephonyutilities.callservicesd.plist
    6 processes killed due to memory pressure
Problem System Launch Daemons: ℹ️
    [killed]    com.apple.awdd.plist
    [killed]    com.apple.ctkd.plist
    [killed]    com.apple.emond.aslmanager.plist
    [killed]    com.apple.nehelper.plist
    [killed]    com.apple.wdhelper.plist
    [killed]    com.apple.xpc.smd.plist
    6 processes killed due to memory pressure
Launch Agents: ℹ️
    [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [loaded]    com.coupons.coupond.plist [Click for support]
    [running]    com.mcafee.menulet.plist [Click for support]
    [running]    com.mcafee.reporter.plist [Click for support]
    [running]    com.oracle.java.Java-Updater.plist [Click for support]
    [loaded]    org.macosforge.xquartz.startx.plist [Click for support]
Launch Daemons: ℹ️
    [failed]    com.adobe.fpsaud.plist [Click for support]
    [loaded]    com.adobe.SwitchBoard.plist [Click for support]
    [loaded]    com.macpaw.CleanMyMac2.Agent.plist [Click for support]
    [unknown]    com.mcafee.ssm.ScanFactory.plist [Click for support]
    [unknown]    com.mcafee.ssm.ScanManager.plist [Click for support]
    [running]    com.mcafee.virusscan.fmpd.plist [Click for support]
    [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
    [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
    [loaded]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
    [loaded]    org.macosforge.xquartz.privileged_startx.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [loaded]    com.facebook.videochat.[redacted].plist [Click for support]
    [failed]    com.facebook.videochat.[redacted].plist [Click for support]
    [loaded]    com.google.keystone.agent.plist [Click for support]
    [loaded]    com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist [Click for support]
    [loaded]    com.macpaw.CleanMyMac2Helper.scheduledScan.plist [Click for support]
    [loaded]    com.macpaw.CleanMyMac2Helper.trashWatcher.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    WDSecurityHelper    UNKNOWN (missing value)
    WDSecurityHelper    Application (/Applications/WD Security.app/Contents/WDSecurityHelper.app)
    WDDriveUtilityHelper    UNKNOWN (missing value)
    WDDriveUtilityHelper    Application (/Applications/WD Drive Utilities.app/Contents/WDDriveUtilityHelper.app)
Internet Plug-ins: ℹ️
    SiteAdvisor: Version: 2.0 - SDK 10.1 [Click for support]
    FlashPlayer-10.6: Version: 17.0.0.169 - SDK 10.6 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    Flash Player: Version: 17.0.0.169 - SDK 10.6 [Click for support]
    CouponPrinter-FireFox_v2: Version: 5.0.3 - SDK 10.6 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
    Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
    JavaAppletPlugin: Version: Java 8 Update 31 Check version
User internet Plug-ins: ℹ️
    Google Earth Web Plug-in: Version: 7.1 [Click for support]
    Stamps.com: Version: 1.1.13 [Click for support]
    DISH Anywhere Player: Version: 2.7.2.0 [Click for support]
Safari Extensions: ℹ️
    SiteAdvisor
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
    Java [Click for support]
Time Machine: ℹ️
    Skip System Files: NO
    Mobile backups: ON
    Auto backup: YES
    Volumes being backed up:
        Macintosh HD: Disk size: 498.88 GB Disk used: 199.33 GB
    Destinations:
        My Passport [Local]
        Total size: 499.73 GB
        Total number of backups: 29
        Oldest backup: 2013-05-17 22:06:43 +0000
        Last backup: 2015-03-27 16:16:56 +0000
        Size of backup disk: Too small
            Backup size 499.73 GB < (Disk used 199.33 GB X 3)
Top Processes by CPU: ℹ️
         6%    backupd
         5%    WindowServer
         1%    Google Chrome
         1%    loginwindow
         1%    mtmd
Top Processes by Memory: ℹ️
    289 MB    Google Chrome Helper
    189 MB    Google Chrome
    84 MB    backupd
    78 MB    Mail
    77 MB    Finder
Virtual Memory Information: ℹ️
    17 MB    Free RAM
    1.22 GB    Active RAM
    1.22 GB    Inactive RAM
    996 MB    Wired RAM
    54.55 GB    Page-ins
    1.93 GB    Page-outs
Diagnostics Information: ℹ️
    Apr 14, 2015, 03:11:54 PM    /Library/Logs/DiagnosticReports/softwareupdated_2015-04-14-151154_[redacted].cp u_resource.diag [Click for details]

When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.
When you post the log extract, you might see an error message on the web page: "You have included content in your post that is not permitted," or "The message contains invalid characters." That's a bug in the forum software. Please post the text on Pastebin, then post a link here to the page you created.

My MacBook pro is running very slow and unresponsive.

My MacBook pro is running very slow and unresponsive. I have mid 2010 model running on lion. Past few days it looks very unresponsive. Tried to reinstall lion as clean copy. Still no luck. Any help on this is much appreciated !
My model has 4 gb ram.

Things That Can Keep Your Computer From Slowing Down
If your computer seems to be running slower here are some things you can do:
Boot into Safe Mode then repair your hard drive and permissions:
Repair the Hard Drive and Permissions Pre-Lion
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Repair the Hard Drive - Lion
Boot from your Lion Recovery HD. When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Restart your computer normally and see if this has helped any. Next do some maintenance:
Suggestions for OS X Maintenance
For situations Disk Utility cannot handle the best third-party utility is Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger. These utilities have limited or no functionality with Snow Leopard or Lion and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems. For more about malware see Macintosh Virus Guide.
I would also recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, or Cocktail 5.1.1 that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. There is no confirmation that this version also works with Lion.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
Carbon Copy Cloner
Data Backup
Deja Vu
SuperDuper!
SyncTwoFolders
Synk Pro
Synk Standard
Tri-Backup
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac Maintenance Quick Assist.
Referenced software can be found at CNet Downloads or MacUpdate.
Additional Hints
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
Add more RAM. If your computer has less than 2 GBs of RAM and you are using OS X Leopard or later, then you can do with more RAM. Snow Leopard and Lion work much better with 4 GBs of RAM than their system minimums. The more concurrent applications you tend to use the more RAM you should have.
Always maintain at least 15 GBs or 10% of your hard drive's capacity as free space, whichever is greater. OS X is frequently accessing your hard drive, so providing adequate free space will keep things from slowing down.
Check for applications that may be hogging the CPU:
Open Activity Monitor in the Utilities folder. Select All Processes from the Processes dropdown menu. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time, then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Often this problem occurs because of a corrupted cache or preferences file or an attempt to write to a corrupted log file.

Premier Elements 4 very slow and frequently crash

Dear Adobe support staff,
I've purchased Adobe Premier Elements 4 several yeard ago for an urgnet job I made.
I didn't use it much because it crashes all the time, and it is very very slow and frustrating. So I've used other software instead.
Needless to say that I was very dissappointed.
Now, I want to give it a second chance. but it stiil keep crashing and still very very slow.
My questions:
1. Why does it crash all the time? is there is a fix for the problem?
2. What kind of Graphics Card or Video Editing Card do you recommend for my system to work relatively normal ?
3. How much will it cost me to upgrade to version 11 ?
My system SPEC:
OS: Microsoft Windows 7 ultimate with SP1 (32bit) .
CPU: INTEL Core2 QUAD cpu Q9550 , 2.83 GHZ with a 4 GB of RAM.
Graphics card: NVIDIA GeForce 9600 GT.
Motherboard: MICRO STAR INTERNATIONAL , MODEL MS-7353 3.0, CHIPSET INTEL X48,
RAM: 4 GB Dual Channel DDR2, 400 MHZ , 512 MB memory.
Please advice.
Sincerely yours,
Shimon Tourgeman.

For the crashing, this FAQ Entry might be useful. It starts with a general PrE checklist, then goes into computer and OS tuneup, and ends with many links on troubleshooting and finding causes: http://forums.adobe.com/thread/792580?tstart=0
As for the GPU, any current video card, with at least 1GB of VRAM, will work well. PrE does not place much of a load on the GPU, but it DOES rely very, very heavily on the video driver. Both nVidia and AMD/ATI issue constant driver updates, with nVidia leading the way at this moment.
Also, while talking about drivers, some users have experienced issues with Win8 drivers. I would wait until SP1 has been released for Win8, before changing to it from Win7. For this reason, I just ordered a new laptop, and specified Win7. As the company, ADK, only builds custom and semi-custom video editing machines, they commented that they will ONLY install Win7 at this time, and have been testing Win8, since the first beta. They do not think that it is yet ready for "prime time."
Good luck,
Hunt
PS - I still use PrE 4.0, but on XP-Pro SP3, and have only crashed it 2-3 times over the years. At least 2 times, it was due to OE on my part. However, my computer is tuned and built for video editing.

My macbook pro is running very slow and restarts

I was working on my 2008 Macbook Pro yesterday and it restarted on its own. Now, when I log in, it loads very slow and will restart unexpectedly.

Reset you SMC which can fix power-related issues, and also reset the PRAM (see below). If that doesn't fix it, please post back.
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
You might also run the Apple hardware test. You'll need your original OS X disks to run it.

I have an iMac4.1 and my iPhoto is very slow and the thumbnails correspond to the wrong pictures. How do I fix this? Or is my iMac too old? Will getting a new iMac solve this problem?.

I have an iMac4.1 and my iPhoto is very slow and the thumbnails correspond to the wrong pictures. How do I fix this? Or is my iMac too old? Will getting a new iMac solve this problem?
I realize is only 512MB of memory but I want to make sure that a new iMac will solve this problem. Can the new iPhoto handle 10GB or more of photos? Or do I have to go to Picasa anyways in which case I can buy any computer to do that?

The model of Mac is not partcularly relevant, it's the version of the OS and iPhoto that matter.
iPhoto - since 2006 - is good for 250,000 images.
Regards
TD

Navigation very slow and not able to enter in memory a sequence issue

Hello,
we have a big problem with oracle forms performance since we deployed our
application to the web. all our customers are not confortable with this new
environment because the sytem are very slow and working it's very difficult.
our application is very slow in point of when the user use very quickly the key
functions it doens't work.
I explain :
for example, we have a button &Verifier (alt+v : acces key to this button) and
when clicking to button we have a dialox box that contains 2 buttons:
Oui(alt+O:access key) and Non(alt+N:access key) and if we click Oui(alt+O) it
popup as an information box and we must click Ok(alt+O: access key).
then if we click quickly alt+v after alt+o after alt+o it doens't work and it
wait to click againt alt+o.(like the system doesn't follow or has not yet enter all the sequence in the memory)
before in client/server it work's fine.
it's like our application in the web it's not able to entered in memory a
serial of access key.
please can you help me the problem is always occuring in the production
environment.
our environment:
- oracle jiniator :1.3.1.22
OAS 10G (9041)
DATABASE 9206
- the complete version of forms : 9.0.4.0.19
- we have 23 USERS.
any help are welcome, the problem are urgent.
thank you.

Hi
Lets analyse and hope to narrow down your issue
We have used the Pick and Pack Manager to release goods from Sales Order through to Invoice. The functionality offered is good,
> Slow performance could be triggered by multile issue , so lets wait
> Do you know PICKand PACK manager is only for status ,but it actually doesn't affect inventory level .
but in practise the system is so slow it is taking 2 to 3 times longer than copying to a Sales Invoice.
> You need to do delivery first and transfer the delivery into invoice .
Is there any way of cutting out part of the process to speed things up? What we really need is to be able to create an invoice(s) straight from the Pick and Pack manager.
>> It basically depends upon your business process . but by software , You can bypass Pick and PACK Manager process. You can transfer your sales order into A/R invoice and while posting A/R invoice , inventory will be reduced .
Hope this help to narrow down your issue
thank you
Bishal

SAP SNC Portal DCM screen performance is very slow and times out

Friends,
SAP SNC Portal DCM screen performance is very slow and times out when user trying to pull data using customer location
What are the cleanup activites we can do to improve the overall SNC performance ?
We did open OSS message but so far no reply from SAP , Is there any one faced performance issue ?
User/vendor is complaining about slowness , query is standard SAP and its taking more time .(table - /LIME/NTREE) , It looks like number of data are huge causing this problem related to LIME/NTREE table. What are the options to improve the performance ?
Thanks in Advance
Hanuman Choudhary

hi Team,
Pls . note the advise from SAP below, IS there any have experiance of archiveing /LIME records ?
Please advise how to start & what the steps in archiving ?
Thanks in advance
I had a look at the DCM query performance in PH1 system and figured out
that most of the time is spent at the LIME layer of database. The
following LIME tables are having far too many entries and is causing
the bottleneck during the query execution.
/LIME/NLOG_QUAN - 38,165,467
/LIME/PN_ITEM - 19,116,518
/LIME/PN_ITEM_TB - 19,154,124
These tables are storing the historical information about LIME(stock)
updates. Since these table grow with each change/update of stock
information, it will slow down the performance of the system over a
period of time. And to avoid the slow responses, the tables should
ideally be archived on a periodic basis to keep the data volume as
minimal as possible. You may have to discuss with the Business to
determine the number of days of LIME record you would want to retain
in the system. I would strongly recommend you to consider the LIME
archival retaining the minimum days (<=60 days) of historical
information. You can find more information about the Lime Archival
in the Sap Help link:
http://help.sap.com/saphelp_scm2007/helpdata/en/44/2a83121dde23d1e10000000a1553f7/frameset.htm.
Kindly get in touch with your BASIS consultant for the LIME archival.
The application performance should definitely improve after the LIME
archival. Please do not hesitate to get in touch with me in case you
require any further clarification in this regards.
Best Regards

Mountain lion download is very slow and in-between it hangs of and starts from beginning. Is there a solution i have already purchased it can i download a torrent and authorize it

Mountain lion download is very slow and in-between it hangs of and starts from beginning. Is there a solution I have already purchased it can I download a torrent and authorize it. Somebody pl. Help

Exactly. Some of us don't understand the situation in India. This is a country with sickest internet speeds. The internet segment is dominated by fraudulant companies. There is no consistency that is why most of the data transfer here is through Pen drives and torrent websites. We have never seen a good downlooad speed here. And on the top of inconsistency lies the Mac book Air without a built in RJ45 port.
If i have to do it in an internet cafe it will cost me more time and money than to purchase a Mac book air itself. Apple should start giving us software loaded flash drives at least at premium.

Very slow and unstable after update...

Hello!
After update yesterday, my Arch64 was very slow and unstable... Eclipse IDE crashes, Firefox uses +200mb and Xorg uses +15% of CPU. Xorg lags when I'm going to switch between virtual desktop in KDE... very strange!
Some confs below:
[root@Selene hlegius]# uname -a
Linux Selene 2.6.25-ARCH #1 SMP PREEMPT Sat Jun 14 17:44:19 CEST 2008 x86_64 Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz GenuineIntel GNU/Linux
[root@Selene hlegius]# free -m
total used free shared buffers cached
Mem: 3947 1121 2826 0 30 466
-/+ buffers/cache: 624 3322
Swap: 0 0 0
[root@Selene hlegius]# kde-config -v
Qt: 3.3.8b
KDE: 3.5.9
kde-config: 1.0
[root@Selene hlegius]# X -version
X.Org X Server 1.4.2
Release Date: 11 June 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.25-ARCH x86_64
Current Operating System: Linux Selene 2.6.25-ARCH #1 SMP PREEMPT Sat Jun 14 17:44:19 CEST 2008 x86_64
Build Date: 21 June 2008 11:53:34AM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Any ideas ?

Rexilion wrote:
I misread that the in kernel driver of v3.12 was working properly. THat way you can figure out what exact change broke performance by testing different development kernels.
There is an in-kernel driver in staging called rtl8192u. It received a lot of changes in v3.12. Maybe try v3.11 and see if that works?
it didnt work in kernel 3.12, but with https://aur.archlinux.org/packages/dkms-8192cu/ it worked perfect
in kernel 3.13 it is horrible both witht he stock driver or with the AUR package.

Loading emoji since 10.10.3 very slow and no different skin tones

Similar Messages

Maybe you are looking for