Loading Error from CRM datasource - Info Idoc recieved with status 8

Hello All,
NEED YOUR HELP
We have a CRM datasource 0CRM_SALES_ACT_1 which works well from source in RSA3. The dataload is a full and fetches 19,000 records from CRM
However when we load it from an infopackage from BW it gives us the following "No data in source sysetm" Info Idoc with status 8. We have tried the following to eleminate some doubts
1) Checked the connection in SM59 using aleremote .Connection and authorization successful. Also loaded data in the BW system for other datasources from same CRM system it works well, so no authorization/ connections issues.
2) In the source system CRM tried transaction RSA3--> extract data get 19000 records
3) In the source system CRM Triied transaction RSA3--> Import Request from BW --> successful.
4) Checked the TRFC queue in SM58 the TRFC queue is empty
5) When we check the logs in CRM for ALEREMOTE we get the following message
synchronous transmission of info IDoc 2 in task 0001 (0 parallel tas
DATASOURCE = 0CRM_SALES_ACT_1
Current Values for Selected Profile Parameters
abap/heap_area_nondia......... 0
abap/heap_area_total.......... 9437184000
abap/heaplimit................ 40000000
zcsa/installed_languages...... ED
zcsa/system_language.......... E
ztta/max_memreq_MB............ 256
ztta/roll_area................ 3000000
ztta/roll_extension........... 2000000000
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 0 records
Result of customer enhancement: 0 records
IDOC: Info IDoc 2, IDoc No. 266228, Duration 00:00:00
IDoc: Start = 2008.10.22 14:18:38, End = 2008.10.22 14:18:38
Synchronized transmission of info IDoc 3 (0 parallel tasks)
IDOC: Info IDoc 3, IDoc No. 266229, Duration 00:00:00
IDoc: Start = 2008.10.22 14:18:39, End = 2008.10.22 14:18:39
Job finished
*What is the issue ? Data is present and confirmed available in source system , yet we get 0 records in BW system ? WE NEED YOUR HELP *

Hi
May be you need to provide full authorizations to the user 'ALEREMOTE'.Ask your basis team to check the authorizations.
Regards,
Chandu.

Similar Messages

Info IDoc received with status 8 in BI but Data available in source system

Hello Experts,
I am loading Budget Period (attributes) into PSA in BI.
Budget Period data Loading Issue : No data available while loading. But source system ie ECC has data in that data source
Data source: 0PU_BDGTID_ATTR
This is full load.
I checked that whether I am making any mistake during data selection. I could not find any issue. Message while loading data into PSA (Yellow Traffic light)
No data available
Diagnosis
The data request was a full update.
In this case, the corresponding table in the source system does not
contain any data.
System Response
Info IDoc received with status 8.
Procedure
Check the data basis in the source system.
Already looked this thread and googled also.
Re: IDoc received with status 8.
Check points:
sm58 - NO issue
BD87 in ECC (RSINFO Idoc status: 03) -sucessful
BD87 in BI (RSINFO Idoc status : 53)
ST22 - NO issue
sm37 - Job is successful (I could see Idoc no in ECC source system in Job log)
I am not sure if I am missing any thing.
Thanks
Rana

Hi all,
I've got exactly the same issue with several extractors. I'm inialising the Master Data in a all new system, in the Quality the loads succeeded but in Prod it failed.
For instance with the basic DataSource "0FUNCT_LOC_TEXT", I've made the following test:
RS3 (R/3) - > 0 data
ST22 -> no short dump
WE05 (Idoc) - > everything is ok
I reactivated the Datasource in R/3 (RSA5) and then deleted it and replicated it in BW but the same issue occured.
Any ideas?
Thanks
jak

Info IDoc received with status 8 infopackage hanging in yellow status

Hi All,
when I extract the Text data without data selection it is fetching the 14 record into BW and changing the status to green,
however when I go with data selection it has No record for this selection in RSA3 as well in BW .
when I do this data selection in infopackage in BW it is bringing ' 0 ' records and hanging in to yellow status in RSMO for more than two days. it is not turning it to red/green
it shows in Monitor with message " Info IDOC received with status" in yellow status.
I have found the OSS 713427, it is already had this correction .
when I check in SM37 job is completed immediately.
there is no short dump
Many Thanks
Ramm

Hi Robort,
thanks for reply
there is no data for this data selection and there is no IDOC processed in BD87 or we02.
I checked out the note and its only for IDOC stuckup .
may I have any other suggestion.
many thanks
Ram

IDoc received with status 8

Hi Experts,
Please find the below Error now i am getting.
No data available
Diagnosis
The data request was a full update.
In this case, the corresponding table in the source system does not
contain any data.
System Response
Info IDoc received with status 8.
Procedure
Check the data basis in the source system.
Please provide me solutions ASAP, this issue.
Thanks & Regards,
Bharathi.

Hi Ananda,
I have followed ur post, but same problem i am facing.
The Error below following:
No data available
Diagnosis
The data request was a full update.
In this case, the corresponding table in the source system does not
contain any data.
System Response
Info IDoc received with status 8.
Procedure
Check the data basis in the source system.
Please give me any other solutions, how to resolved this issue.
Thanks in Advance.
Regards,
Bharathi.

Failed to load data from CRM On Demand. ServerThe server is temporarily una

Hi,
I would just like to ask if any of you are encountering this error when sending SOAP requests to CRMOD. Is this just because CRM On-Demand is down?
Failed to load data from CRM On
Demand. ServerThe server is temporarily unavailable. Please try again later.
thanks,
John

Hi Royston,
The instance that we are accessing is: https://secure-ausomxdsa.crmondemand.com.
I assume that it's a test environment. So I navigated to (https://ebusiness.siebel.com/odcustomercare/support/alerts/staging/index.asp) "Staging & Test Environments" -> "Planned Maintenance - Staging" (since there is no Testing link) and saw a calendar of downtimes which didn't quite match-up to the date when we encountered the error. We encountered the error on November 25, which was marked on the calendar as a planned 8-hour downtime. During that day we didn't encounter continuous downtime but just erratic spurs of the the error. Am I looking in the right place? Thanks

Idoc distribution with status of error records.

Hi Gurus,
my business requirement is i want to creat the Outbound Interface to distribute the data from sapserver to ESB server using the one userdefined function module, in this custom function module i written the logic to validate the input data if validation is file those error records are updated to one return table parameter and using the FM Master_Idoc_distribute for create and distribute the sucessfull records. till its working fine (with status 30-ready to dispach, 01- idoc creatd is in we05 and i have done the all configaration of message type creation, idoc type creation, port, partnerfrofil) ,
but my requirement is , for example if in 10 records even one record is also error records then no need to distribute the idoc data to sending system, just i want to send the idoc number with status error with error message.
plese suggest me the appropriate procedure.
Thanks & Regards,
Sai Ram.

Hi,
in ur code ur filling the idoc data rcord, control record ryt ..before u append data to idoc data , u r also validating and u might be doing in loop for appening the idoc data.
if there is any error in idoc then it won't distribute the data, it will be in error status only..u can only see the data in WE02. Then u can also change the data in WE02 and redistirbute it via BD87.
if u have any conerns let me know
Regards,
Nagaraj

IDoc created with status 03 checked via we02, but couldnt find in XI

Hi all:
Could you please do me a favor? implement a idoc to idoc issue. it has been created successfully .
as It is found that the idoc created with status of 03 -
data dispatched to port ok (rather than 12 dispatch ok). however, I couldn't find it via SXMB_MONI on XI, there must be something wrong . coudl you please give me a hint ?
Thank you very much!!!

hi,
you need to check transaction SM58 (remove the user from it) and F8
it might be the reason that you didn't create a port in IDX1 on XI/PI
but you will see that in SM58
Regards,
Michal Krawczyk

Email on Idoc Failure with Status 56 64 68 69 70

We have standard inbound idoc processing for Basic Type : DELVRY01 and Message Type : DESADV using the function module IDOC_INPUT_DESADV1.
We currently have a requirement to send an email, when any of these type of Idocs fail with status 56, 64, 68, 69 and 70.
Where would be best place to provide this solution to send an email to a particular user when the Idoc fails with the above status?

Hello Saleem,
One approach would be to consider workflow based on object type IDOCAPPL. The start condition for the workflow could be the triggering of the event errorProcessCompleted. You could filter further by status and your message type (DESADV ) to only start the workflow for the errors that you mentioned. The workflow could then send an email.
You will need to verify the details for your own scenario.
Good luck,
Greg Kern

Stages when pulling data from CRM datasource?

Hi,
We are pulling data from CRM.Please explain me the steps while pulling data from CRM.

Hi,
Data from CRM to BW is divided into diiferant Data sources.
First need to find data source name.
Use the following seps
First of all, activate the CRM DSs by scenario:
1) Activate the application component hierarchy (tcode RSA9). Changes made to the application component hierarchy in the CRM system can be transferred to the BW using the "Edit Application Component Hierarchy" (SBIW - Postprocessing of DataSources).
SAP Note 434886 must be implemented in CRM 3.0 before the application component hierarchy is activated.
2) Activate the Business Content DataSources (tcode RSA5).
Select/enter the application component and choose Execute (F8).
To compare the shipped and active versions, choose the 'Select Delta' pushbutton. If there is no active version of the DataSource, it is selected automatically.
To activate the shipped version, choose the 'Transfer DataSources' pushbutton.
3) Management of the versions of the BW-Adapter metadata (tcode BWA5). All DataSources are displayed that are managed by the BW Adapter.
As in transaction RSA5 (Service API Metadata Activation), the 'Select Delta' function can be used to select the inactive DataSources or compare shipped and active versions.
You can also go directly to the screen for maintaining DataSources that are managed by the BW Adapter.
The 'Compare Version' function makes a detailed comparison of the shipped and active versions.
All BW-Adapter metadata is considered when versions are compared:
Header information (Table SMOXHEAD)
Mapping information (Table SMOXRELP)
Global selection conditions (Table SMOXGSEL)
Attribute key fields (Table SMOXAFLD)
It is depends if you want to use in BW some ready made (Business Content) data analysis models.If so, you need to find your data source in RSA5 in CRM and activate it. See this link http://help.sap.com/saphelp_nw2004s/helpdata/en/04/47a46e4e81ab4281bfb3bbd14825ca/frameset.htm to find Cube you want to analyze in BW, and Data Source connected to it.
BW CRM analysis.
http://help.sap.com/bp_biv135/html/bw.htm
CRM Extraction
Pls chk this link for Crm enhancement
Enhance standard data sources in CRM
BWA1 is for all standard crm datsource maintaince
rsa2 for generic datasource
BWA5 i think we use this Tcode after RSA5 activation additionally.
yes(incase of delta)
BWA7 do we have to use this tcode along with BWA1 for standard datasources also or else only for generic datasource.
irrespective of the type of dtasource,use it if you want to load delta(you need to delta enable the datasource here)
So we don't need to put the code as we traditionally do it for R/3 , if we just mapp the fields that would bring the data for these fields.
as i told in CRM we willwrite code in BADI in case you have done enhancement
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/a-c/customer%20enhancements%20and%20userexits%20in%20bw%20-%20sap%20netweaver%20%20know-how%20network%20webinar.pdf
also chk this(credit goes to the writer)
CRm enhancement:
1. Enhance Extract Structure with the required fields. (Create & include an append structure to the extract structure via transaction RSA6).
2.a) Release the fields of the append for usage. ( To do this, double click on the Datasource and remove the flags in the column 'Hide Field' for all fields of Append).
2.b) If the new fields cannot be seen in the extract structure of the transaction BWA1 then change and save the datasource, and then activate it in RSA6.
3. Define your mappings in BADI (CRM_BWA_MFLOW) to fill these fields.
Goto SPRO . Follow the path ->SAP Implementation guide ->Implementation with other mySAP components ->Data transfer to the Business Information Warehouse-> Settings for the application specific datasources (CRM)->Settings for BW adapter-> Badi :BW adapter :Enhancement of datasources in messaging flow.
4. Replicate the new Datasource to BW.
5. Expand the Communication Structure in BW.
6. Maintain transfer Rules for the new Datasource.
7. Activate the trasfer rules and perform the upload.
Refer to the SAP Note 692195 for more info ......
pls Check this links..
regarding bw crm extraction
http://help.sap.com/bp_biv235/BI_EN/html/BW/CRMAnalytics.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/be/92fb3b28904f73e10000000a114084/frameset.htm
CRM extraction
Hope this helps,
Regards
CSM Reddy

Hierachy Load error from R/3

Hi All,
I got an error while loading hierarchy from R/3 to BW. error is
Diagnosis
 The hierarchy level of the parent node must be one larger than the
 hierarchy level of the actual node. This is not the case for the node
 with ID 00092826 and its parent node with ID 00092827 .
System response
Procedure
 Correct the hierarchy level of the node or of the parent node in your
 source system.
Procedure for System Administration
Can anybody help how to solve this error and where to correct this hierarchy in R/3.
This is an urgent issue.all my dependant loads are stopped due to this error.
Thanks in advance
Narendra.

Hi,
Refer Note 339453
Is this is the first time ?
Thanks
Assign points if useful

Loading error from BI to Oracle

we are trying to connect to ABAP connector through OPEN HUB to Oracle.
a.       a function module is called when we run the extractor to load data from BI to Oracle.
b.       When the extractor is started it calls a function module.
c.       When the function module is executed it opens a dialogue box asking if the data is deleted from the table.
d.       This dialogue box is stopping us from doing a load.
I need the solution to suppress the dialogue box.
Thanks & Regards
Ramakanth.

Hi
Thanks for your reply. Following are my settings in my interface.
Source : MS SQL Server 2K. It contains a table called sampleTable with two fields empId,empName .empId is the primary key. Under the Flow tab, I have selected LKM SQL to SQL
Target: Oracle 10g . It contains a table OracleTable with two fields empId,empName. empId is the primary key. In the Flow tab, I have selected IKM Oracle Incremental Update.
When I execute the interface it said Session started. When I open Operator, I found the following error under Sessions folder.
933 : 42000 : java.sql.SQLException: ORA-00933: SQL command not properly ended
java.sql.SQLException: ORA-00933: SQL command not properly ended
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:316)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:282)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:639)
Where Can I see the code generated from the interface. Is it a PLSQL code?
Pls help me where I am doing wrong.

Date load error From ODS to Cube?

Guru's,
Here is a status of data load and suggest me.
Actually we are loading data from ODS to Cube which is full load.This loading is done thorugh process chain and it is loaded for every half an hour.Every time the earlier load will be deleted and next load will be taken to cube.Two days ago the load had gone wrong.When I tried to see cause for the failure in Monitor details I could see Update missing and processing missing.When I see in process chains log view I got info stating some invalid characterstic had appeared.But when I search in PSA the whole of the data packets are green.If there is any invalid characterstics PSA should show a red status.But it is not showing.Please guide me how could I solve this?
point will be definitely awarded for the proper answers.
Thanks in advance.
vasu.

Hi Vasuvasu
Once the edit is done and reloade the sata it wont show u the records in Red..
Hope itz Helps..!
Regards
KISHORE M REDDY
**Winners Don't Do Different things,They Do things Differently...!**
> I dont whink this is with Disk space Y because after
> every full load we are deleting data.

CRM dataSource fields dont match with BW InfoObject and attributes

Hi
I have installed the 0BPARTNER in the BW system and also activated and replicated the master data datasoutces -0BPARTNER_ATTR, 0BPARTNER_TEXTS in the CRM system.When i execute the datasource 0BPARTNER_ATTR via t-code: RSA3 in the CRM system, the fields of this datasource does not match with the attribute InfoObjects of 0BPARTNER in BW system.
Please help me i am not sure if the above two datasource are to be used for attributes and texts load of 0BPARTNER.I checked this on SAP help and also on SDN.
Thanks.

Hi Dear,
For CRM, Instead of using that data source use 0CRM_BPART_ATTR.
I hope this full fill your requiement.
thanks
obaid

Sales orders from CRM are not getting blocked with credit check

Hi All
I have configured ECC in such a way that , if cutomer does not have enough creditlimt, then those sales order will get blocked. Our orders will come from CRM, and some times some orders are not getting blocked with credit check even though the customer does not have credit limit. And at the same time some orders are blocked with credit check...what are all the things that should be checked to diagnose the problem.
Thanks in advance for looking into this

Please check if you have any custom code/user exit in ECC which uses transaction code (VA01 , VA02 or VA05 etc) prior to invoking credit checks.
Orders created via CRM will not have transaction code set (SY-TCODE).

Idoc failed with status 51 for Warning/Information messages

Hi All,
We are trying to create some Sales Orders with the help of Idocs. We are facing some problem as mentioned below.
1.There are some warning messages/information messages written in standard Sales Order User Exit USEREXIT_SAVE_DOCUMENT_PREPARE
2.As soon as the Idoc processing reaches any of these messages, it considers them as ERROR message and Idoc fails with the status as 51 which is not expected.
3.Also, I see that the Sales Order is saved with the data that has been passed in the Idoc.
Is this the standard behavior ?? (Or) Is there any EDI related configuration setting which can be used to suppress these kind of messages in Idoc Processing ??
Any help on this would be highly appreciated.
Thanks,
Babu Kilari

if your IDOC has status 51 then it is not posted, hence your sales order cannot be created from this IDOC. of course this error behaviour can be originated by the user exit.
please read OSS note Note 747631 - Some tips when testing idoc_input_orders

Loading Error from CRM datasource - Info Idoc recieved with status 8

Similar Messages

Maybe you are looking for