Loading fonts into FInal Cut Pro 5.0.4

Is it possible to load addtional fonts into FCP 5.0.4?
I loaded the font into all the font folders I could find and still they have not shown up in the Final Cut pro fonts? I restarted twice?
Am I missing some hidden file that I must load the fonts into?
Thanks for your help

There is no provision for loading fonts into FCP. Use FontBook to add fonts; choose to make the fonts available to all users so they'll be installed in .[boot drive]/Library/Fonts.
But even with that, FCP won't see just any font. FCP seems to be partial to TrueType Data Fork fonts.
-DH

Similar Messages

How can I get MPEG-2 video into Final Cut Pro X?

Hello! I have several MPEG-2 video files on which I need to perform some edits. When I tried to import them into Final Cut Pro, I learned that Final Cut Pro can't import MPEG files. Okay, so I went into QuickTime and exported one as 720p. 20 minutes later, I had a video that I could load in FCP. Awesome. Except that when I watched the video, the audio was waaaaaaaay out of sync. So, is there a different way I could get this MPEG-2 video into a format that FCP will like while keeping video and audio together?
I would keep trying a few different things without direction, but these videos are like 90 minutes long and the conversion process is lengthy.
Thanks!

Although I looked up the equipment, I couldn't find what kind of MPEG2. I'm assuming program stream.
I don't know why you had the sync problem with QT. You could bring it into FCP and detach the audio and manually line it up it's off by a constant amount.
Or you can use MEG Streamclip. You will also need the playback component, which is $20. Follow the instructions on the Squared 5 site to install it. Streamclip is worth having even if you don't use it this time around.
Good luck.
Russ

How to import unix executable files into Final Cut Pro

A friend wanted me to create a Halo 3 Montage Video for him. He loaded the saved clips onto a flash drive for me but when I put it into my computer the information comes up as Unix Executable Files and I don't know how to import them into Final Cut Pro 7.0.2 or if it's even possible. Any help would be much appreciated. Thanks.

Ok. Well, I plug in the flash drive. When it opens there's a folder that says XBox360. When I click on the folder there are 9 files listed that say Data0000, Data0001 etc. The preview option shows a gray folder that says Exec on it and the only information I can find is that it's a Unix Executable File. When I click on more info option everything that pops up is what I've already told you. I tried opening it in the VLC Player but nothing played which makes me think there aren't video files on the flash drive. When I click on the file to open it the Terminal Program appears and lists basic information about the file.
Is there a program that can take these files and covert them into something that can run in Final Cut Pro? Or is that what VLC is supposed to do?

Importing SWF into Final Cut Pro with no Background

Hi Everyone:
I've created an animated macromedia .swf file and imported
into Final Cut Pro successfully just as an .swf file. I can see the
.swf file animate in Final Cut Pro, the only problem is there is a
white background along with my animation. I've seen many slighly
related threads to this problem, but no end solution or work
around. any help? here's what i've seen in posts and other forums:
- create another layer below your object and place a
tranparent color swatch box the size of your stage size
- export the flash file as .mov with an alpha channel
transparency
- export the flash file as a .mov with an alpha channel, then
open in quicktime pro, then re export again as a quicktime movie
with the "Millions +" option.
- i've also heard something about having the right codecs, or
purchasing some other 3rd part software.
none of these approaches have worked for me. My Dream would
be to just import the .swf file straight into Final Cut Pro. I've
been exporting my flash movies as a png sequence and importing
every image into FCP for the time being. I'm also thinking about
just making the background bright green, because i think i just
chroma key it out, but i'm not sure how clean this will be.
here's the related thread:
http://www.kirupa.com/forum/showthread.php?t=242444
Thanks for any help.

You need one of these: http://desktop.thomsongrassvalley.com/products/videoconversion.php to do it properly. The ADVC 300 is the best option for the money.

Importing imovie project into Final Cut Pro

Hello I need help getting my HD imovie project into final cut pro. I recored the project in 24p and it's already imported into imovie. What is the best way to get it into Final Cut Pro so that I can edit it further without sacrificing the quality.
Another problem is that I have heard that imovie compresses the video and totally ruins the quality. Is this true? And is this reversible in any way? I have already recorded over all the clips for this project on my camcorder. How screwed am I?
-Michael

First thing to do is find your original clips that you captured in IMovie. I don't have much experience in IMovie, but see if you can select a clip and control click and choose reveal in finder. If that works, open one of these clips in quicktime player and hit command-i and let us know the format of the clip.
Kind of doubt you'll be able to actually import your project into fcp, but you should be able to recreate it in fcp without too much difficulty.
Let us know what camera you shot and captured from. That may be of some help.
Hopefully someone with more experience in IMovie will speak up, but hopefully this will get us started.
Message was edited by: Michael Grenadier

I can't upload or import videos from my iphoto library, into final cut pro x. When i click, IMPORT MEDIA in FCP, It lists iPhoto Library as GRAY, and will not let me access it. I need the videos out of there. I have tried every way I can think of.

Like the title says...
I can't upload or import videos from my iphoto library, into final cut pro x. When i click, IMPORT MEDIA in FCP, It lists 'iPhoto Library' as GRAY, and will not let me select it. I need the videos out of there. I have tried every way I can think of.
I have also tried from the iphoto side, to export the videos or share them to final cut. I have had no luck.
I have tried to drag and drop indidual video clips from iphoto to fcp, and the programs simply do not respond to each other
I can see in the OLDER version of final cut pro x, where it has IMPORT FILES as an option, it was possible. I see this on forums and youtube videos of the older versions.
However, the newer version that i have, does not have IMPORT 'FILES' as an option, it is simply all lumped together as IMPORT 'MEDIA'
Thank You for the Help

at the end, you say "import preferences", which program are you describing?
So im safer using footage that is remotely being pulled from iphoto...
vs
using footage that is imported into FCP from imovie?
Is there anything i can do in fcp to make this footage more reliable or safer or more stable as i pull remotely from iphoto?
All the footage, and all the libraries to all programs, or on a new pegasus 12tb raid 5 setup fyi.

How do I import video and sound files from a hard drive into Final Cut Pro X?

I just installed the lastest upgrade to Final Cut Pro X. I have an external hard drive connected to my computer and I want to import video and sound files into Final Cut Pro X- how do I make the transfer?

File>Import Files (Shift-Cmd-I). Select the files, fill out the dialog box that appears as you need.

I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

at the end, you say "import preferences", which program are you describing?
So im safer using footage that is remotely being pulled from iphoto...
vs
using footage that is imported into FCP from imovie?
Is there anything i can do in fcp to make this footage more reliable or safer or more stable as i pull remotely from iphoto?
All the footage, and all the libraries to all programs, or on a new pegasus 12tb raid 5 setup fyi.

Video quality changes when imported into Final Cut Pro

I have video files that I have imported from an external hard drive that were transferred from an HD camera. When viewing the footage directly from the hard drive, the quality is great. Once imported into Final Cut Pro, however, there are small "flares" (don't know how else to describe them) that appear for split seconds across the screen. The best way to describe it is if you are watching a television that has an antenna, there will be static or interferance on the image. This is barely noticable but I can't determine what would cause the decline in quality. My video settings are set to DV NTSC 48 kHz and wonder if this is the problem or if anyone knows of something else that I should change prior to importing.

Thank you so much for your help! I am technically challenged and STRUGGLING to say the least.
Some files are definitely H.264 and I can convert them to ProRes. I also have clips that are
DVCPRO HD 1080p25, 1,440 x 1,080 (1,888 x 1,062)
Linear PCM, 16 bit big-endian signed integer, 2 channels, 48000 Hz
Current Size: 1,440 × 810 pixels
Will I need to do anything to those as well?
Here is the question I'm afraid to ask because I think I know the answer already. Can I simply replace the clips in my sequence with the newly compressed ProRes files or do I have to change all of the video and sequence settings and then start all over?

Best way to export from Motion 2 into Final Cut Pro 5, working in DV?

I am working in DV in Final Cut Pro 5, and I would like to get the best quality from anything I bring in from Motion 2 into Final Cut Pro 5, I keep hearing use the Animation codec. I would like to hear from the Panel of experts.
Happy Thanksgiving,
Sebastian

The Best way is to round-trip from FCP. Or simply import the .motn file directly into FCP. If you require an alpha channel and for some reason don't want to bring the .motn file in, Animation with millions+ for the colors (+ is the alpha channel) will work, But if you just want straight DV, you should export a DV file.
Patrick

VIDEO_TS content into Final Cut Pro HD?

Is there a way I can get content from a DVD's VIDEO_TS folder into Final Cut Pro HD?
I gave some footage to a person for editing purposes and I'm not very satisfied with the results. The image quality isn't the greatest and I'd like to add some effects to the video by importing the content into Final Cut Pro.
I would then like to re-encode the video with Compressor's High Quality Encode option with the hopes of improving the video's quality.
Is this possible and can someone please guide me on how to accomplish this task.
Thanks in Advance

If you're saying that you gave someone video footage (DV perhaps) they cut it and gave you a DVD, you're not going to get better quality by taking that DVD footage into FCP. You'll be compressing something that's already been compressed once and it's going to get worse everytime you do it.
You would be far better off getting the original footage and perhaps the project file that the editor created and recutting that way. Or even better, get the editor to make the changes you want and, if there were compression problems, do it again using better settings.
That being said, you can do what you want but you'll have to use software to demux the files... Mac the Ripper, etc. Do a search here for more info.
rh

How do you import raw motion video projects into Final Cut Pro X

How can I take a raw motion video (not a template for a transition, generator, etc.) and import it into final cut pro so I can just put it right into one of my projects.

share, Export Movie, short cut ⌘-E
in FinalCut: Import File

How to Import AVCHD 1080/60p Files into Final Cut Pro 7?

How do I import AVCHD 1080 / 60p Files into Final Cut Pro 7? And if there is no direct way [I certainly haven't found one, but I'm no expert], what additional software would be used? I want to import the files from a Panasonic HDC-HS700 onto an Intel Mac laptop [Mac OSX 10.5.8]? Obviously I don't want to compress & compromise my footage.
I’m sure a simple, straightforward series of steps would help many people with this issue.
Thanks!

Thanks for the response!
I'm guessing you've found ClipWrap2 to be better than competing products [such as AVCHD Converter for Mac, Toast Titanium, or Voltaic].
On to the next steps. Using Clipwrap2, would I leave the checkbox "Convert Audio to LPCM" selected or deselected [and what the heck is LPCM?]. In the pulldown menu would I choose "Rewrap (Don't alter video samples)" or do I save a step by choosing "Apple ProRes 422"?
And finally, am I gaining anything by shooting 1080/60p on this Panasonic HD Camera other than a headache? [Some have suggested this is not a True 60p.]

How do I import a .fcpproject file into final cut pro?

How do I import a .fcpproject file into final cut pro?

You don't. The application opens it when it recognizes it in the correct folder structure.

How do i import imovie project into final cut pro

I movie 08 is seriously lacking titles and transitions, so I want to spruce up my project in final cut pro, but I do not know how to get the project into final cut pro
thanks for your help

YES!
Apple seems to be talking down to users with much of the workflow and nomenclature in the iLife Apps - it's almost insulting.
But I'm as old as the hills too - grumping has become one of my favorite pass times.
And while I'm at it:
I still can't figure out why there is a "GO" item in the menu of OSX. WTH is THAT ? And why can't users change it's contents? Very PC. It would be more tolerable if we could use it like the OLD Apple Menu back in OS9. The Dock is cute GUI eye candy but I'd like the option of "docking" items in a menu too.
I'll shut up now before I get in trouble...
g

Loading fonts into FInal Cut Pro 5.0.4

Similar Messages

Maybe you are looking for