Loading hierarchies for 0GL_ACCOUNT InfoObject

Hi,
I cannot load hierarchies into 0GL_ACCOUNT InfoObject. I have created InfoPackage and in Update Data options I can only choose 'Only PSA' option. I have loaded attributes and texts without any problems. What should I do?
Regards,
Maciek

Hi Maciej,
Hope you had customized your 0GL_ACCOUNT hierarchy on R/3. Refer the below link
http://help.sap.com/saphelp_nw04/helpdata/en/6f/97a16a65fb11d3971c006094b969cf/frameset.htm
Bye
Dinesh

Similar Messages

  • Load Hierarchies  to 0gL_Account

    Hello,
    I try to load Hierarchies  to 0GL_Account from R3 system.
    i use at tran SBIW at source system (r3) -
    > generate data source for set hierarchies -
    >at the field name
    i choose RACCT .
    which table  to choose to create to data source ?
    the data source is 4R_SAKNR_0000_HIER
    thanks in advance,
    yuval

    Dear,
    If i understood correctly yours questions, you would like to know the details for GL account hierarchy.
    There are two hierarchy available at ECC side ( GL account and FS Item level). Both used for analyzing the financial data. You can have multiple hierarchy in ECC system to see and analyze the data and same way you can have multiple hierarchy can load in SAP BI at info object level and later restrict the report at query designer level or run time.
    No need to create any custom data source for uploading the GL hierarchy. Pls check with SAP FI consultant to know the correct hierarchy to upload.
    Activate both of data source and use the InfoPackage  at info object level to upload the hierarchy. In info package (SAP BI) you can see the option ( Available hierarchy at OLTP), at a time you can select one hierarchy to upload. later you can go by restricted KPI with filtering with proper node to get the desired report output using BE-x.
    Hope you get the answer. Best of luck.
    Rgs,
    Ambuj Kathuria
    Practice Head - SAP ILM/ BI

  • Attribute data load fails for 0RPA_MARM Infoobject

    Hi BW experts,
    Attribute data load to the infoobject 0RPA_MARM(not a infoprovider) is on yellow status for long time and after it is throwing the below error
    Runtime Errors :UNCAUGHT_EXCEPTION
    Except                 : CX_RSR_X_MESSAGE
    I checked the forums for this issue but got the solution for target as infoprovider.
    Please suggest.
    Regards,
    Leo.

    Hi Leo,
    Basically loading data into Master data Infoobject and making it InfoProvider are two different things. Loading data in Master data infoobject will be same for all the Infoobjects and when you make them as Infoprovider you will get an advantage of doing reporting directly on top of that Infoobject.
    Regards,
    Durgesh.

  • Error Loading Text  for an Infoobject

    Hi all,
              I get the following error when loading a Text for a given Object, it is someting related to 0LANGUAGE , any inputs greatly accepted.
    "The data record 1 & with the key '000000000012 &' for characteristic
    ZMATERIAL" & has a blank language key.                       
    Thank you.

    Hi Murali thanks for the response but can you please be more detail , Should I have to manitain 0LANGU , currently it is not maintained in our system , and all the values I checked in PSA (ZMATERIAL_TEXT) for Language Key is "EN".
    thank you.

  • Application document not posted: while loading hierarchies

    Hi,
    I am trying to load hierarchies for 0costcenter and 0material. I am getting the error '51 Application document not posted'. The load is successful for master data as wellas text data loads. The connections are fine and parter profiles too. Please let me know the step by step by procedure to solve this error.
    Also let me know what can be possible reasons due to which this problem occurs.
    Thnx in advance.....
    and yes i do remember "thanx = Points" :):)

    Check this if it helps:
    Error in Data loading
    Re: Problem with Info Idoc -- please suggest

  • Cant create hierarchy FILE load for 0GL_ACCOUNT

    Hi guys i have a special Question......we are trying to create a file load hierarchy source for 0GL_ACCOUNT, in BC i cant find any FILE type infosource or datasource.....in source systems FILE i cant create a datasource for hierarchy and in the hierarchy infosource appears a message that the infosource is already mapped to DEVFILE because theres an infosource FILE type for load master data...
    I cant create a file load hierarchy infoosurce for 0GL_ACCOUNT
    Regards

    Are you using the flexible or direct update?  This will only work with Direct Update since you can only load a data target/infoprovider using the flexible update and a hierarchy is never an infoprovider.
    For example, if you make your characteristic and infoprovider.  The Attrib and Text infoproviders show up under the infoprovider tab.  However, the Hierarchies don't.
    So, here is a step-by-step solution you can follow ...
    1.) Under Infosources tab, find your characteristic.  You need to find the infosource for direct update.  It will have the three icons ... one for attributes, texts and hierarchies.  If you don't see the green hierarchy icon, then you need to turn hierarchies on for the characteristic.
    2.) Right click on the infosource and choose, "Assign Datasource". 
    3.) Under Source System, choose your flat file source system, it is probably named FLATFILE, FILE, TEXT, etc....
    4.) Enter your transport info and select yes to the infosource/datasource assignments for attributes, texts and hierarchies (assuming you have all three icons)
    5.) Select the drop down for datasource and choose your hierarchy datasource.
    6.) Activate the datasource or switch the transfer method to IDOC (instead of PSA) and save the infosource (no activation under IDOCs).
    7.) You can now create your info package against the hierarchy datasource.
    If you are having trouble getting to this stage, the next is going to be more difficult -or- perhaps you are already at this and are having trouble loading the hierarchy?
    Whatever the case, please tell us the steps you have gone through and the errors or error messages you are receiving.  Sometimes these issues are very complicated to both explain and to understand.
    Brian

  • Load Hierarchies to Z CostElement InfoObject

    Hi,
    I have to load Hierarchies to a newly created Z CostElement (ZCOSTELEM) InfoObject.
    So I thought of using the same way how 0COSTELMNT is loaded. 0COSTELMNT is loaded using DataSource 0COSTELMNT_0102_HIER.
    When I tried to create Transfer Rule for my ZCOSTELEM InfoObject:
    1) It asked for the source system. I have selected proper R/3 system.
    2) Then it prompted with available DataSources. Here I'm not able to see 0COSTELMNT_0102_HIER.
    Any idea why I'm not able to see DataSource 0COSTELMNT_0102_HIER?
    Is it the correct process to load hierarchies to newly created InfoObjects? or anyother way?
    Please help me.
    Reason why I have created a new InfoObject for CostElement is [http://forums.sdn.sap.com/thread.jspa?threadID=2136291]
    Thanks,
    Vijay.

    Vijay Ramarao wrote:
    Thanks for your reply.
    > I'm afraid users may not like this approach. Already they are creating CostElements in R/3 and assigning them to Cost Element Groups. Whenever there is any change, they have to update in R/3 and flat file for BW load. I hope this a tedious process for them.
    > Is there any other ways?
    > Thanks for patience.
    >
    >
    > Regards,
    > Vijay.
    Very true! We are also working on such an system, a combo of flat files & R/3 data. But I can suggest you to automate the process of changes or ask users to do these changes in releases of 3 or 6 Months. This way at least you can save some effort for the manual loads. Also, you can schedule these loads via process chains, & just do the save hierarchies steps. The only problem here is any change in ATTR master must be also done for the HIER which requires manual effort for some dimensions viz. Biz units.

  • Infopackage settings for loading Hierarchies

    Hi Experts,
                     Here i want to load master data for hierarchies into my BI system, according to my knowledge we hav to do some changes in infopackage for loading hierarchies. I want to knw the infopackage settings for hierarchies for BI 7.0 version, also i want to knw the infopackage settings for BW 3.5 version. It seems there is a hude difference on the infopackage window for both the versions, please advice on this.      
    Thanks in advance
    Shiva

    hi
    in BI7.0  version we cant load heirarchy's still using for loading hierarchy's BW3.5 verstion and migrate..
    thx
    vij

  • Error while loading hierarchies

    Dear all
    I am faicng the following errors while loading hierarchies from R/3
    1.Error"Error in the hierarchial structure"
    When i open the logs i can see the follwing analysis,but not able to understand
    Analysis
    The node with the technical name 0000104 appears more than once under the node with the ID 10400011. A node must be hung only once under its direct predecessor (parent). The nodes with the same technical name have the IDs 10400017 and 10400012.
    When one of the nodes is an interval, this means that the other node is contained in this interval. When both nodes are intervals, this means that both interlap.
    Possible solution
    Remove the Duplicate Nodes
    Can anyone explain this please
    2.Error: InfoObject ZH_LKSTOM is not available for Datasource ZH_LONKLA_HIER
    I am trying to load the hierarchy for the Info object ZH_LONKLA
    Can anyone kindly help me out in these
    Regards
    Veena.

    1.Error"Error in the hierarchial structure"
    the hierarchy does have duplicate values. the possibility is that you are loading a set from R/3, where the system allows to have duplicate values in different nodes, but that doesnt hold true in the case of BI. so ask ur functional folks to nake the set unique and the load should go fine.
    .Error: InfoObject ZH_LKSTOM is not available for Datasource ZH_LONKLA_HIER
    I am trying to load the hierarchy for the Info object ZH_LONKLA
    Not sure whats the relation between ZH_LKSTOM and ZH_LONKLA

  • Error in ALPHA conversion while loading hierarchies

    Hi,
    I got the following error while loading hierarchies:
    <i>Error in ALPHA conversion in NodeId00000088 for InfoObject 0PROFIT_CTR
    Message no. RH224
    Diagnosis
    The technical node name  for node id 00000088 is not consistent for conversion exit ALPHA, which is stored with InfoObject 0PROFIT_CTR.
    Possible reasons for the error:
    The original consistent value returned by the DataSource was changed by a conversion routine to a non-consistent conversion exit value.
    The DataSource returns a value that is not consistent in the conversion exit.
    System response
    Loading the hierarchy was terminated.
    Procedure
    Check whether the correct conversion exit was entered for the InfoObject. If necessary, change the conversion exit, conversion routine or the data to be extracted.
    A further option is to activate automatic conversion in the transfer rules. Here, the system executes the conversion exit, making sure that the data is in the correct format.</i>
    If it is not hierarchies, we fix this error by prefixing the zeros (as we are working on Qbox we wont change the transfer rules to select the conversion routine) but here there is no PSA, the data is coming from ALE. Based on this please suggest me to how to fix this error?
    Points will be given for any helpful suggestion

    Ganesh,
    Can you please check out the Alpha Conversion Routine and also nodeid for that infoobject..
    There might be some inconsistencies in the code..
    Hope it helps
    Gattu

  • There are no hierarchies for this InfoSource in source system

    Hello Gurus,
    We have recently created an extractor for the Country hierarchies, these are the steps we took:
    SBIW->Settings for Application-Specific DataSources (PI)->Profitability Analysis->Create Hierarchy DataSource (TC: KEB1)
    We informed the infoobject 0country and the characteristic KMLAND.
    We replicated the datasources, created the transfer rules in our dev. system and loaded the required hierarchy with success.
    We transported our requests to our prod. environment. and when creating the infopackage for the hierarchy we get the message "There are no hierarchies for this InfoSource in source system". We have checked in our R/3 system and the hierarquies are there.
    Are we missing something in the process so that we may see the available hierarquies?
    Thanks!!! Points will be rewarded.

    Hi Sumit,
    You were correct, the request did not transport the contents of the table TKEBWLH. There is a note from SAP which corrects this problem, note 856895. v02. After applying the note and recreating the request, we manage to see the available hierarchies in our Prod. System.
    Thanks for your help!
    Regards,
    Elder

  • How to setup and load hierarchies in BW?

    Dear BW gurus,
    We have vendor hierarchy in ECC table LFMH.In BW when i try to load this hierarchy for 0VENDOR using 0VENDOR_LKLS_HIER datasource, i do not see the hierarchy that i need from the ECC (in the "available hierarchies in OLTP" option in the infopackage), instead it shows me some other irrevelant hierarchies.Is there any customization in BW that i am missing before i load the hierarchies? Any help would be greatly appreciated.
    Thanks
    Raj
    Message was edited by:
            Raj Singh

    if its a set hierarchy, you can create a datasource in tcode BW07. follow the steps below.
    1. Generate the DataSource for FI-SL sets using the BW IMG (Transaction BW07).
    2. FI-SL sets are not compounded in OLTP. If you want to extract FI-SL sets for a coumpound characteristic in BW, proceed as follows:
    a) Select the 'BW InfoObject (characteristic) is compounded' field and enter a data element (compound information of the meta data).
    b) After generating the DataSource, execute compounding in a customer exit. To do this create, a project for the SAP enhancement RSAP0001 in Transaction CMOD, and program EXIT_SAPLRSAP_004 (ZXRSAU04) as described in the attachment.
    3. Execute the following steps in BW:
    a) Update the meta data for the FI-SL sets in the InfoSource tree.
    b) Maintain the transfer structure and transfer rules.
    c) If the extracted set hierarchies contain intervals, you must allow intervals in hierarchies for the characteristic in BW. Check the hierarchy properties of the characteristic in Transaction RSD1 and set the "Intervals in hierarchies allowed"
    4. With this solution you can only extract sets created in Transaction GS01 (set class 0000).
    If the hierarchy list in BW for the set data source is empty, first check in the OLTP system whether set class 0000 contains suitable sets at all. To do this, start Transaction GS02 (not GS03!). Field Set class may be displayed; if this is the case, enter 0000 there. Position the cursor on field Set name and select F4. Enter the table and field name you specified in Transaction BW07 in popup "Select sets" and select "Continue (Enter)". If message GR003 "An appropriate object was not found" is displayed, the hierarchy list in BW is also empty.
    5. For CO groups (set class 01xx), the following DataSources are contained in the standard delivery
    ·     0ABCPROCESS_0107_HIER                    Business process
    ·     0ACCOUNT_0109_HIER                       Account number
    ·     0ACTTYPE_0105_HIER                       Activity type
    ·     0COORDER_0103_HIER                        Order
    ·     0COSTCENTER_0101_HIER                    Cost center
    ·     0COSTELMNT_0102_HIER                     Cost element
    ·     0PROFIT_CTR_0106_HIER                    Profit Center
    ·     0STKEYFIG_0104_HIER                      Stat. key figure
    On principle, sets can also be created for the DDIC fields of these objects in R/3 GS01.
    From Release 4.0, this no longer makes sense since the CO groups can then be used anywhere in FI-SL.
    With regard to the conversion of sets to CO groups in Release 4.0, please refer to the FI-SL-VSR Release Information for 4.0A and Notes 92029 and 51132.
    6. For other set classes, no DataSources are delivered.

  • Loading hierarchies in BW from excel

    Hi all ,
    how to load hierarchies from excel into the BW .
    do the excels need to be in .csv format or can they be loaded from .xls format.
    do i need to have a specific format of the columns in excel as a pre-requisite for loading .
    please also let me know all pre-requisites for format of excel.

    Hi Neeraj,
    the file needs to be in a special format and depends on the hierarchy of your infoobject, whether it is time-dependent or not. You can see the necessary file structure if you goto infosource, choose your hierarchy datasource. then you will find a button hierarchy structure. If you press it you will see a table with the expected columns. The file should be an csv file. You select it in the infopackage to your infosource. You can upload it directly from your desktop but only if you start the package immediately. The file must not be in use by anyone other, otherwise load fails. be careful if you number your nodes. the number must be unique
    ue in the file. the node numbers are the keys for your infoobject or of infoobject 0HIERNODE for text nodes.
    I'm looking for a sample file if you want.
    Kind regards,
    Juergen

  • How to load hierarchies using process chains

    Hi ,
    Can any one please explain the steps for loading hierarchies using process chain.whenever i drag the hierarchy infopcakage Save variant is also coming by default,so do we need to have different SAve variant for different hierarchy infopackages or can we have one save variant for all the hierarchy variables.
    Thanks,
    Vaka

    Hello Veka,
    How r u ?
    Yes ! SAVE Variant & Attribute Change Run will add up while loading the Hierarchy InfoPackage.
    Provide the InfoObject Name for which u r loading the Hierarchy in the SAVE variant and SAVE it. The same will be transferred to the Attribute Change Run also.
    If u r creating the Chain with more InfoPackages then have the Save Variant & Attribute Change Run at the last.
    Best Regards....
    Sankar Kumar
    +91 98403 47141

  • Problem load hierarchy into 0GL_ACCOUNT

    Hi all,
    I' am trying to load data into 0GL_ACCOUNT for use the 0FIGL_CO1 cube, when try to load the hierarchy from dataSource 0GL_ACCOUNT_T011_HIER has errors...
    1. I edit the infoPack and message say something like "the transfer method has change PSA to IDocs".
    2. When I check the transfer rule see that is missing map some fields ... i don't know if is necessary make the fix like with the 0GLACCEXT... then i fill the fields missing and when load the data with the infoPack it fill the PSA but not the hierarchy.
    I have tried everything but now I don't know what to do.
    Please help me, I am new in BW.
    tnk

    Hi,
    Mapping is
    0HIENM     Hierarchy name     HIENM
    0HIER_VERS     Hierarchy version     VERSION
    0DATEFROM     Valid-From Date     DATEFROM
    0DATETO     Valid-to date     DATETO
    In InfoPackage under Hierarchy you check correct one, ie. click on Available Hierarchies From OLTP and select correct one and load,.
    Thanks
    Reddy

Maybe you are looking for