Loading Hierarchies from Informatica Power Center
Hi Guys,
I am getting the error when I tried to load the Hierarchy from the Legacy system using Informatica Power Center. The structure of the data which is coming from the source system is in the same structure which we normally load it from the flat file.
NODEID | INFOOBJECT | NODENAME | LINK | PARENTID | LANGU | TXTSH | TXTMD | TXTLG
I was able to load the data from the flat file source system without any errors, but if I use 3rd party source system I am getting the follwoing error.
Node ID 00000080 has not been included in the hierarchy
Message no. RH207
Diagnosis
The node with the ID 00000020 and the node name ZMC is not specified as
child, next, or parent in any node in the hierarchy. It is also not a root node (parent ID is not equal to 0). Therefore, the node is not used in the hierarchy.
Procedure
Delete this node or insert the node into the hierarchy.
Anybody loaded the hierarchy from 3rd party systems into BW. Could some one tell us where we are missing something
Appreciate any kind of help.
Thanks
John
Hi BB,
Thanks for your reply. The problem is, system has to create the TLEVEL automatically if the hierarchy data is coming from the Informatica. If I download the same data and load it through the flat file, its working fine because for the flat file source systems TLEVEL is automatically creating by the system. We are planning to implement a custom solution.
Thanks once again.
Regards
John
Similar Messages
-
Import from planning missing in Informatica power center
Hi,
I'm using Informatica Power Center 8.1.sp5 , and trying to connect to hyperion planning 11.1.3.
Created the connection under application connection browser, but now when I go to target designer, I don't see Import From Plannig Option. Please let me know if anyone has seen this before. Thanks
VinilYou can get the key from edelivery.oracle.com
If you follow it "how to i get my licenses" then it will take you to
http://licensecodes.oracle.com/
select Hyperion and then look for your product
System 9 Data Integration Management (11.1.1 and 11.1.1.1 only)
Hyperion_DIM.zip
If you have a problem, please get back or let us know it worked.
By the way are you planning to extract data from Essbase 11.1.x, what is your target for this data? -
Need an efficient solution using Informatica Power center
Need an efficient solution using Informatica Power center-
I have a requirement-
1-I have a database which gets refreshed everyday.
2-I have a workflow which gets started only if the database gets refreshed.
So I have to design a workflow-- which will do the following things-
a- Checks if the database has been refreshed today or not(Not hard coding...as this workflow will run everyday to check that)
b- If the database has been refreshed then only start the workflow wf_XYZ
( SUGGESTION-may be after the session/task finds out that the db has been refreshed it can create a trigger file which will eventually start the next workflow) else can wait to get the db refreshed.Just implement the change capture process to load new data.
That would take care of it, and you can relax.
If helps mark
~ http://cool-bi.com -
Doubt on installing informatica power center reports
hi all,
i have downloaded informatica 8.1.1 from oracle portal. i am installing but got error while installing informatica power center reports saying that server URL for dataanalyzer/metadata manager instance must be entered. awaiting for responses.
thanks in advanceYou can get the key from edelivery.oracle.com
If you follow it "how to i get my licenses" then it will take you to
http://licensecodes.oracle.com/
select Hyperion and then look for your product
System 9 Data Integration Management (11.1.1 and 11.1.1.1 only)
Hyperion_DIM.zip
If you have a problem, please get back or let us know it worked.
By the way are you planning to extract data from Essbase 11.1.x, what is your target for this data? -
Informatica Power center ?
Hi,
I've seen few posts that talk of Informatica Trial version available with Oracle download.
I want to know if it's currently available ? What version I need to download to get Informatica Power center ?
Thanks
MarkI downloaded the file from the given URL:
http://www.oracle.com/technology/software/products/bi/performance-management/111110/hyperion_data_integration_111110.html
--But this is to install SP5 patch which requires Informatica to be installed on your machine with default directories.
I found another URL which gives Informatica PowerCenter8.1.1
And used the URL you mentioned for Oracle license codes. But it has license key for Informatica Data Quality (Not for Powercenter) and do not work for Power Center 8.1.1 installations.
Can anyone help me finding the right key ?
Thanks!
Yogini -
Download Informatica Power center 6.2.2
Hi all ,
Can you please tell me where can I download Informatica Power center 6.2.2. software in free
And also instructions .
Thanks in advance
swapnaI downloaded the file from the given URL:
http://www.oracle.com/technology/software/products/bi/performance-management/111110/hyperion_data_integration_111110.html
--But this is to install SP5 patch which requires Informatica to be installed on your machine with default directories.
I found another URL which gives Informatica PowerCenter8.1.1
And used the URL you mentioned for Oracle license codes. But it has license key for Informatica Data Quality (Not for Powercenter) and do not work for Power Center 8.1.1 installations.
Can anyone help me finding the right key ?
Thanks!
Yogini -
How to Load Hierarchies from flatfile in BI7
Hello Gurus,
How to load Hierarchies from flat file in BI7
As when creating datasource in BI7,
IT GIVES FOLLOWING OPTIONS
TRANSCTION DATA
MASTER DATA TEXTS
MASTER DATA ATTRIBUTES...
ALL THESE WE BRING TO PSA LEVEL BY INFOPACKAGE AND SEND DATATARGET BY DTP...
But how about Hierarchies...
Looking for reply
Regards
GuruLook at the below blog for step by step procedure :
Hierarchy Upload from Flat files
http://help.sap.com/saphelp_nw04/helpdata/en/fa/e92637c2cbf357e10000009b38f936/frameset.htm -
Hi, all.
Please advise, how I can load hierarchies from ODS, if
ODS stores data about structure of hierarchies. If any solutions exists excluding, extract data to flat file and load it again to hierarchies.
Max.Hi,
Hierarchies data one type of data master data.
BW data base was desifned master data stored out side the cube. When ever other data target (cube) can use those master data .I.E you can load data on info object level. Becose this is master data.
You can load data from flat files .
The structure is like this.
when ever u r creating hierarchies three table is going to create /BIC/HZGLACOUNT,/BIC/KZGLACOUNT,/BIC/IZGLACOUNT
While loadong falt file you need to take this table /BIC/HZGLACOUNT structure. According that structure you need to create excel sheet and loading is like flat file.
TX,
V.V.REDDY -
Need help regarding Informatica Power Center Client 9.0.1/9.1 Download
Hi,
I am not able to find Informatica Power Center Client in the Oracle Edelivery Website.
I naviagated through Oracle Business Intelligence 11g Media Pack v21 for Microsoft Windows x64 (64-bit) and found the below softwares listed:
Download
Oracle Business Intelligence Data Warehouse Administration Console 11g and Informatica PowerCenter and PowerConnect Adapters 9.0.1 for Windows x86 (64-bit) (Part 1 of 3) V35641-01 Part 1 of 3 645M
Download
Oracle Business Intelligence Data Warehouse Administration Console 11g and Informatica PowerCenter and PowerConnect Adapters 9.0.1 for Windows x86 (64-bit) (Part 2 of 3) V35641-01 Part 2 of 3 2.0G
Download
Oracle Business Intelligence Data Warehouse Administration Console 11g and Informatica PowerCenter and PowerConnect Adapters 9.0.1 for Windows x86 (64-bit) (Part 3 of 3) V35641-01 Part 3 of 3 2.0G
Download
Oracle Business Intelligence Data Warehouse Administration Console 11g and Informatica PowerCenter and PowerConnect Adapters 9.1 for Windows x86 (64-bit) (Part 1 of 4) V35747-01 Part 1 of 4 1.1G
Download
Oracle Business Intelligence Data Warehouse Administration Console 11g and Informatica PowerCenter and PowerConnect Adapters 9.1 for Windows x86 (64-bit) (Part 2 of 4) V35747-01 Part 2 of 4 2.0G
Download
Oracle Business Intelligence Data Warehouse Administration Console 11g and Informatica PowerCenter and PowerConnect Adapters 9.1 for Windows x86 (64-bit) (Part 3 of 4) V35747-01 Part 3 of 4 2.0G
Download
Oracle Business Intelligence Data Warehouse Administration Console 11g and Informatica PowerCenter and PowerConnect Adapters 9.1 for Windows x86 (64-bit) (Part 4 of 4) V35747-01 Part 4 of 4 2.0G
I am facing tough time finding Power Center Client in the above list.I hope Informatica PowerCenter and PowerConnect Adapters 9.1 relates to Informatica Server alone(Or) Does it include Client too? Can you please help me finding Informatica Client for 64 bit Windows.
Edited by: 995241 on Mar 20, 2013 11:38 PMhi, Informatica PowerCenter and PowerConnect Adapters 9.1 is a combined version with both server and client tools
Hope it helps -
Support ending for Informatica Power Center 9.x
Hello,
Does any one know about Oracle support end dates for the Informatica Power Center 9.x versions.
The OBIA 7.9.6.4 requires Informatica Power Center 9.x, but Oracle has not provided the support end dates for the Informatica.
Kind regards,
SandeepSKV_585724 wrote:
Hello,
Does any one know about Oracle support end dates for the Informatica Power Center 9.x versions.
The OBIA 7.9.6.4 requires Informatica Power Center 9.x, but Oracle has not provided the support end dates for the Informatica.
Kind regards,
Sandeep
http://www.oracle.com/technetwork/middleware/bi-applications/biapps7964cert-matrix-1891451.xls
Thanks,
Hussein -
Hi,
I loaded the Hierarchies from R3 in to BW with the Business Content DataSources.
In R3--> RSA3; I am finding 32 records
But when I load the data in BW, the Monitor shows 58 records .......
What are the exact steps I should take care to validate the records / records count in R3 Vs BW.
Thank you,Well as mentioned in my previous post RSA3 works best for the non Hierarchy Datasource.
For hierarchy datasource I never found the best way to handle this scenario.
We have random check with the nodes of hierarchy in R/3 to BI after the loads which is not full proof and am aware of.
So to confirm the same,execute the standard reports in R/3 with Hierarchy nodes and Custom build reports in BW with the same Hierarchy to compare the values;however this is the crudest way.
May some one has best method for suggestion....
Hope it Helps
Chetan
@CP.. -
LOADING HIERARCHIES FROM FLAT FILE.
Hi,
I'm new to BI, & have been given an assignment of uploading hierarchies from flat files. I'm stuck up in the step of creating infosource. plz help me out, hw to do dis in sap BI 7?
cos m using sap bi 7 & not 3.5
Edited by: user2487 on Aug 27, 2009 9:30 AMHi,
You can have a look at the below document on the same. It is not mandatory to use an InfoSource in the DataFlow.
https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/60debae1-84dd-2b10-e7bf-bdedf1eabdf9
Regards,
Gaurav
Edited by: Gaurav Kothari on Aug 27, 2009 1:05 PM -
Loading hierarchies from R/3
HI friends,
I want to load article hierarchy from R/3 (IS Retail). Can anyone tell me the steps to do it.
In RSA5 i find....
0RF_ARTHIER1_ATTR -- Article hierarchy Level 1
0RF_ARTHIER1_TEXT -- Article hierarchy Text level 1
Thia is from Level 1 upto Level 10. Can anyone tell me the use of these.
Thanks.Hi,
Check these.
[http://help.sap.com/saphelp_nw04/helpdata/en/80/1a6729e07211d2acb80000e829fbfe/frameset.htm]
[Hierarchy Data loading from R/3 system]
[Loading Hierarchy from R/3 to BW]
Regards
Prasad -
Loading Hierarchies from InfoObject Attributes
How can I load a hierarchy from an InfoObject Attribute in BI70 ?
HI
Hierarchy loading is possible in BW3.5
i think its not possible to load hierarchy in BI 7.0to infoobject attributes from flat files.
And for loading in 3.5 you can refer to blog by Prakash Bangali in BI general.
Cheers
Sunil -
Custom Workflow Load Error in Power Center error code 36331
Hi,
I have installed OBIEE version 11.1.6 and OBI APPS version 7.9.6.3. I am using informatica power center 9.0.1.
I have followed the following guide Oracle® Business Intelligence Applications Configuration Guide for Informatica PowerCenter Users
Version 9.0.1
When i run a load i am getting the error code 36331.
And the Workflow Log shows the below:
*ERROR 2/5/2013 5:30:58 PM node1 1423948096 LM_36320 Session task instance [C_SDE_ORA_EmployeeDimension]: Execution failed.*
The DAC log file is as follows
*3722 SEVERE Tue Feb 05 17:23:29 GMT 2013 Workflow C_SDE_ORA_EmployeeDimension failed with the following message :*
*=====================================*
STD OUTPUT
*=====================================*
Informatica(r) PMCMD, version [9.0.1 HotFix2], build [242.1111], LINUX 64-bit
Copyright (c) Informatica Corporation 1994 - 2010
All Rights Reserved.
Invoked at Tue Feb 05 17:23:28 2013
*Connected to Integration Service: [BIAIS].*
*Integration Service status: [Running]*
*Integration Service startup time: [Sun Jan 13 12:10:31 2013]*
*Integration Service current time: [Tue Feb 05 17:23:29 2013]*
*Folder: [CUSTOM_SDE_ORAR1213_Adapter]*
*Workflow: [C_SDE_ORA_EmployeeDimension] version [1].*
*Workflow run status: [Failed]*
Workflow run error code: [36331]
*Workflow run error message: [WARNING: Session task instance [C_SDE_ORA_EmployeeDimension] failed and its "fail parent if this task fails" setting is turned on. So, Workflow [C_SDE_ORA_EmployeeDimension] will be failed.]*
Workflow run id [1052].
*Start time: [Tue Feb 05 17:23:08 2013]*
*End time: [Tue Feb 05 17:23:13 2013]*
*Workflow log file: [instance/3rdparty/oraclebi/infrmatica/901/server/infa_shared/WorkflowLogs/SDE_ORA_EmployeeDimension.log]*
*Workflow run type: [User request]*
*Run workflow as user: [Administrator]*
Run workflow with Impersonated OSProfile in domain: []
*Integration Service: [BIAIS]*
Disconnecting from Integration Service
Completed at Tue Feb 05 17:23:29 2013
*=====================================*
ERROR OUTPUT
*=====================================*
*3723 SEVERE Tue Feb 05 17:23:29 GMT 2013 pmcmd startworkflow -sv BIAIS -d node -u Administrator -p **** -f CUSTOM_SDE_ORAR1213_Adapter -paramfile /instance/3rdparty/oraclebi/infrmatica/901/server/infa_shared/SrcFiles//ORA_R1213.DataWarehouse.CUSTOM_SDE_ORAR1213_Adapter.C_SDE_ORA_EmployeeDimension.txt C_SDE_ORA_EmployeeDimension*
Status Desc : Failed
WorkFlowMessage :
*=====================================*
STD OUTPUT
*=====================================*
Informatica(r) PMCMD, version [9.0.1 HotFix2], build [242.1111], LINUX 64-bit
Copyright (c) Informatica Corporation 1994 - 2010
All Rights Reserved.
Invoked at Tue Feb 05 17:23:28 2013
*Connected to Integration Service: [BIAIS].*
*Integration Service status: [Running]*
*Integration Service startup time: [Sun Jan 13 12:10:31 2013]*
*Integration Service current time: [Tue Feb 05 17:23:29 2013]*
*Folder: [CUSTOM_SDE_ORAR1213_Adapter]*
*Workflow: [C_SDE_ORA_EmployeeDimension] version [1].*
*Workflow run status: [Failed]*
Workflow run error code: [36331]
*Workflow run error message: [WARNING: Session task instance [C_SDE_ORA_EmployeeDimension] failed and its "fail parent if this task fails" setting is turned on. So, Workflow [C_SDE_ORA_EmployeeDimension] will be failed.]*
Workflow run id [1052].
*Start time: [Tue Feb 05 17:23:08 2013]*
*End time: [Tue Feb 05 17:23:13 2013]*
*Workflow log file: [instance/3rdparty/oraclebi/infrmatica/901/server/infa_shared/WorkflowLogs/SDE_ORA_EmployeeDimension.log]*
*Workflow run type: [User request]*
*Run workflow as user: [Administrator]*
Run workflow with Impersonated OSProfile in domain: []
*Integration Service: [BIAIS]*
Disconnecting from Integration Service
Completed at Tue Feb 05 17:23:29 2013
*=====================================*
ERROR OUTPUT
*=====================================*
Error Message : Unknown reason for error code 36331
ErrorCode : 36331
*3724 SEVERE Tue Feb 05 17:23:29 GMT 2013 Could not get statistics for sessions using command :pmcmd getsessionstatistics -sv BIAIS -d node -u Administrator -p **** -f CUSTOM_SDE_ORAR1213_Adapter -w C_SDE_ORA_EmployeeDimension SDE_ORA_EmployeeDimension*
*3725 SEVERE Tue Feb 05 17:23:29 GMT 2013*
ANOMALY INFO::: Error while executing : INFORMATICA TASK:CUSTOM_SDE_ORAR1213_Adapter:C_SDE_ORA_EmployeeDimension:(Source : FULL Target : FULL)
MESSAGE:::
Irrecoverable Error
pmcmd startworkflow -sv BIAIS -d Instance -u Administrator -p *** -f CUSTOM_SDE_ORAR1213_Adapter -paramfile /instance/3rdparty/oraclebi/infrmatica/901/server/infa_shared/SrcFiles//ORA_R1213.DataWarehouse.CUSTOM_SDE_ORAR1213_Adapter.C_SDE_ORA_EmployeeDimension.txt C_SDE_ORA_EmployeeDimension*
Status Desc : Failed
WorkFlowMessage :
*=====================================*
STD OUTPUT
*=====================================*
Informatica(r) PMCMD, version [9.0.1 HotFix2], build [242.1111], LINUX 64-bit
Copyright (c) Informatica Corporation 1994 - 2010
All Rights Reserved.
Invoked at Tue Feb 05 17:23:28 2013
*Connected to Integration Service: [BIAIS].*
*Integration Service status: [Running]*
*Integration Service startup time: [Sun Jan 13 12:10:31 2013]*
*Integration Service current time: [Tue Feb 05 17:23:29 2013]*
*Folder: [CUSTOM_SDE_ORAR1213_Adapter]*
*Workflow: [C_SDE_ORA_EmployeeDimension] version [1].*
*Workflow run status: [Failed]*
Workflow run error code: [36331]
*Workflow run error message: [WARNING: Session task instance [C_SDE_ORA_EmployeeDimension] failed and its "fail parent if this task fails" setting is turned on. So, Workflow [C_SDE_ORA_EmployeeDimension] will be failed.]*
Workflow run id [1052].
*Start time: [Tue Feb 05 17:23:08 2013]*
*End time: [Tue Feb 05 17:23:13 2013]*
*Workflow log file: [instance/3rdparty/oraclebi/infrmatica/901/server/infa_shared/WorkflowLogs/SDE_ORA_EmployeeDimension.log]*
*Workflow run type: [User request]*
*Run workflow as user: [Administrator]*
Run workflow with Impersonated OSProfile in domain: []
*Integration Service: [BIAIS]*
Disconnecting from Integration Service
Completed at Tue Feb 05 17:23:29 2013
*=====================================*
ERROR OUTPUT
*=====================================*
Error Message : Unknown reason for error code 36331
ErrorCode : 36331
EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.IrrecoverableException
I have checked all of the Mappings, Mapplets and Workflows as well as generating parameters for attempting the load, but it still errors. Does anyone have any ideas?
Many thanks for any help in advance.Was the Workflow or the DAC task been modified. Because the Out-of box customer dimension task would look like:
is Commands executed :
pmcmd startworkflow -sv OBID_REP -d Domain_xxx.com -u Administrator -p **** -f SDE_ORAR1213_Adaptor -lpf /u01/oracle/Informatica/server/infa_shared/SrcFiles//ORA_R1213.DataWarehouse.SDE_ORAR1213_Adaptor.SDE_ORA_EmployeeDimension_Full.txt SDE_ORA_EmployeeDimension_Full
If a session in the workflow is renamed then the DAC Command's need to be modified to reflect the new name.
Was Execution Plan built before Starting it.
Let me know if this helped.
Regards,
Jay
Maybe you are looking for
-
Find in the filename of the jsp page that is included
i have a main.jsp that includes a menu.jsp page dynamically : if (request.getParameter("view")!=null){ include_h_menu_page = request.getParameter("view); <jsp:include page="<%= include_h_menu_page%>"/> now i am in the menu.jsp and here
-
Internal error in R-tree processing: [Recursive fetch error]
Hello, I seem to be getting an error when using any type of SDO function (SDO_RELATE, SDO_FILTER, SDO_ NN, ... ) on my spatially indexed data. The error I'm getting is this: ERROR at line 1: ORA-29903: error in executing ODCIIndexFetch() routine ORA-
-
my phone is just displaying the itunes icon and telling me i need to plug the usb cord in
-
Icon view, icon position not kept
Most of my files are displayed in icon view. I have group them in positions easy to remember. Since upgrading to SL every now and then a folder (or two) will have the icons ordered by name and positioned in a grid even if I haven't give that command.
-
Hi, I would like to build my own report based on paramteres saved in XI DB tables instad of the report i get in SXMB_MONI. How can i do it/ where can i find the DB Scema etc...?