Loading Hyper-v devices drivers for Windows XP Task Sequence

I'm trying to create a Windows XP reference image using SCCM 2007 R3 with MDT 2010. XP installs and boots up but video, mouse, etc do not load. NIC is working so no network issues. When XP comes up I can't use the mouse
(a huge pain). From hyper-v client I can ""Insert Integration Services Setup Disk" but first, I have to close all the pop-up windows for "unknown devices". Since I don't have a mouse, it is difficult close those windows.
Can someone please advise how to load the hyper-v devices I have tried to make a package of the "vmghost.iso" then run "setup.exe /quiet /norestart" but this task fails in the task sequence.

Hi,
Please go to see if it is configured properly:
Installing
Hyper-V integration components in Windows XP when building reference image
You may also refer to the steps in the following article:
Creating
WinPE with Integration Services for Hyper-V
Regards,
Sabrina
This posting is provided "AS IS" with no warranties or guarantees, and confers no rights. |Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question.
This can be beneficial to other community members reading the thread.

Similar Messages

Where can i find device drivers for windows vista please for my iphone4

where can i find bluetooth device drivers for my iphone 4 and windows vista please

If you've installed the correct version of iTunes, you have all the drivers there are. The iPhone does not support bluetooth file transfer or sync. The only thing for which you can use Bluetooth with a PC is tethering.

NI Device drivers for Windows 7 64 bit operation system

I downloaded NI Device drivers Feb. 2012 version. When I ran it, there was an error message pop-up, "\dcd_feb12_1.exe is not a valid Win32 application." My computer has Windows 7, 64bit operation system. I called help desk and I was told that it should be compatible with 64bits machine. So, would you please give me an advice? Thanks.

I'm telling you that it is very likely the downloaded files are corrupted and therefore will not run. Everytime I saw that, I found it was due to the company firewall.
If you don't have the install DVDs, I recommend getting a hold of your local NI representative to see if they can hook you up with some discs.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

U330 wireless and bluetooth drivers for windows xp. devices not working. drivers already installed

so i did a fresh instal of windows xp pro sp3.
device manager shows yellow question mark and ! for Network Controller and BCM2046 Bluetooth Device. i have tried using lan to windows update, update drivers, but device manager cannot find anything.
i have installed the 2 broadcom drivers for windows xp listed on lenovos website. i made sure that wireless switch is on, and fn+f5 wireless option is set to on as well.
LAN shows up. and so does the 1394 on the network connections, but no wireless.
(note: on my server 2008 os, the new windows troubleshooting instructed me to turn on a specific service, which then enabled my wireless to work.)
however i cant seem to find a way to get the wireless to work.
Could someone tell me all services exactly need to be enabled for the wireless to work? and why does the network controller still show up on device manager even after i have installed the drivers?
please help, totally lost.

Your "yellow" device is Bluetooth, not WiFi.
Fn+F5 utility work depends on both of them, so you need all drivers to be installed before it will work.
Install bluetooth drivers for your model. Also, your WiFI also may be Broadcom (Gemtek) and you may be trying to install Intel WiFi.
//help will save the world

Device Drivers for hp pavilion g6-1318ax windows 7 32bit for AMD processor

I don't get device drivers for HP pavilion g6-1318ax for the operating system Windows 7 32bit. I have AMD motherboard & processor. I need all device drivers. What should I do?

Hi:
You will need to get the smbus controller driver from me...
For the SMBus controller...Here is what I have done...I have zipped up and attached below under Attachments, the raw smbus controller driver files for you to unzip and manually install. This should work without any drama.
Download and unzip the file.
Go to the device manager and click on the smbus controller needing drivers. Click on the driver tab. Click on Update Driver.
Select the Browse my computer for driver software option and browse to the driver folder that you unzipped.
Make sure the Include Subfolders box is checked and the driver should install. Then reboot.
Attachments:
SMBus.zip ‏88 KB

HP PSC 1100 drivers for Windows 7

Are there already HP PSC 1100 drivers for Windows 7?
I cannot use the scanner with my new Windows 7 machine.
Thanks!

The PSC 1100 drivers should be pre-installed on Win 7 itself. If just plugging in the printer doesnt work, then go to the Devices window, click on Add A Printer, and when you come to the drivers window, click on Windows update to get the latest drivers from Windows update. This is a legacy product, so HP most likely wont release software and drivers separately.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

Hp compaq nc4200 drivers for windows 8 iam very sad because am not found thise drivers

hp compaq nc4200 drivers for windows 8 iam very sad because am not found thise drivers in any sits please anser me quq
thanx

Hi,
Besides britishdhez's suggestion, we also try to get your apps and devices working in
Windows 8.1 in compatibility mode:
Get your apps and devices working in Windows 8.1
http://windows.microsoft.com/en-IN/windows-8/get-apps-devices-working
Karen Hu
TechNet Community Support

Looking for device drivers for HP Pavilion 23-b012 all in one pc

where do I find device drivers for my pavilion 23 for windows 7 32bit.

Hi:
Your PC is not supported by HP for Windows 7 and Windows 7 32 bit will be particularly harder to find drivers for since OEMs have moved on to furnishing 64 bit operating systems on their PC's.
I can't get to the support pages to find out what model wireless network card your PC has, but here are the links to some of the drivers you need.
1. Install the AMD chipset drivers and reboot. These should install the smbus and usb 3 controllers.
http://support.amd.com/en-us/download/chipset?os=Windows%207%20-%2032
2. Install the AMD graphics driver and reboot.
http://support.amd.com/en-us/download/desktop?os=Windows%207%20-%2032
3. Install the audio driver and reboot. Accept the agreement. DL and install the first driver on the list.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=24&PFid=24&Level=4&Conn=3&DownT...
4. Ethernet: DL and install the second driver on the list.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=7&Level=5&Conn=4&DownTy...
5. Card reader: DL and install the first driver on the list.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=15&PFid=25&Level=4&Conn=3&DownT...
If you know what model wireless card that PC has, let me know and I will find the W7 32 bit driver for it.

I have an iMac with mountain lion 10.8.3 with boot camp 5.0.2 .i installed windows 7 -64 bit with boot camp but the boot camp didn't install drivers for windows please guide me for trouble shooting .

i have an iMac with mountain lion 10.8.3 with boot camp 5.0.2 .i installed windows 7 -64 bit with boot camp but the boot camp didn't install drivers for windows please guide me for trouble shooting .

Kappy wrote:
Boot Camp doesn't install the drivers. You have the drivers on a separate USB device if you followed directions. Once in Windows connect the USB drive with the driver software. It should startup automatically and install the drivers.
You don't even need to do that. As downloading the drivers from within Boot Camp Assistant can be unreliable, it is better to get the package directly from here:
http://support.apple.com/kb/DL1638
Copy the .zip file to a USB flash drive or burn it to a DVD in OS X. Install Windows as normal, insert the flash drive/DVD in Windows, copy the .zip file to the hard drive, extract it, then run the setup executable.

How Do I Install Apple Drivers For Windows XP?

Okay, so I have a 15 inch mid 2012 MacBook Pro that is running OS X Mavericks. After many attempts, I managed to install Windows XP 32 bit as a secondary operating system on the HDD using Disk Utility. The only devices that Windows XP recognised upon the installation were the keyboard and the trackpad. I then inserted a Snow Leopard disc to install the Apple Drivers for Windows XP and it appeared as though the drivers got installed(the Boot Camp icon appeared on the taskbar next to the digital clock). However, when I restarted windows, none of the devices other than the keyboard and the trackpad worked. Does this imply that the drivers didn't get installed? If so, why is this and how can I install the drivers? If the drivers did get installed, why aren't the devices working? Please help me out, if possible. Thanks in advance.

It does not work because you are running Mavericks and trying to use non-Mavericks drivers for an operating system (XP) that is not support on your hardware or your operating system.

Problem with drivers for Windows 7 for Ноутбук HP Envy 17-k152nr (K1X63EA)

Hello
Please help to find drivers for Windows 7 for Ноутбук HP Envy 17-k152nr (K1X63EA) for:
1) ACPI\HPQ6007
2) USB\VID_138A&PID_0050&REV_0060
It is detected as "unknown devices"

Hi:
You need these drivers...
ACPI\HPQ6007:
HP 3D DriveGuard Software
File name: sp67280.exe
USB\VID_138A&PID_0050:
Validity Fingerprint Sensor Driver
File name: sp66110.exe

Access to installed device drivers on windows using Java?

Is it possible to get access to installed device drivers on windows using java.

Java has APIs for accessing the OS, The OS has APIs for accessing devices.
Java does not have APIs for direct access to devices.
However, depending on the device, you get what you want most of the time. You would only access the device directly if the device isn't supported by the OS or Java directly.
Which device do you have in mind?

Audigy 2 sound card drivers for windows 7

hello,
Audigy 2 sound card drivers for windows 7.
I bought the card from a friend no longer used. funtion perfectly on Win XP, but I have a system equipped to win 7 / 32 bit. unable to install a driver to work, the soundcard is recognized, but the properties says "This device can not start. (Code 10)". All software is installed. But I think the driver is the problem, I downloaded the package from the site, they also have a software autoupdate, but everything ends with error.
SB0240 Audigy2
Some help pls.

back,
my operating sistem seems to be the problem.
i instaled a new clean win 7/64 and the driver is ok.
now, my currently operating sistem works verry fine and i don't want to format.
i have many software programs instaled in a period time and it took me some time to instaled again.
what sollution is in this moment?
my sistem (win ultimate 7/32 actualy) is daily updated.
is there any possibility to remove all audio drivers, including montherboard and audigy and reinstal all?
thank you.

Graphics drivers for windows 7 compatible with hp notebook pc 500

iplz recommend me graphics drivers for windows 7 compatible with hp notebook pc 500

Hi:
Download and run this driver. You will probably get an unsupported operating system error.
http://h20565.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=447304&swItemId=ob_47264_1&swEnvOid=2096
Close out of any error windows.
Go to the device manager and click on the video controller needing drivers.
Click on the driver tab. Click on update driver. Select the Browse my computer for driver software option and browse to the driver folder that was created when you ran the file.
That folder will be located in C:\SWSetup\sp34749.
Make sure the Include Subfolders box is checked and the driver should install.
Reboot and your graphics should be working normally.
You will not have Windows aero because the Intel GMA 900 graphics adapter is not 100% Vista or W7 capable but at least you will be able to change the screen resolution and have graphics acceleration enabled.

Bluetooth Drivers for Windows 7 for 9300 &8520

I cannot find any drivers for Windows 7 and my Bluetooth application. Can anybody help please? This issues has been posted before. Come along Blackberry support teams, where are you. Its seems to be OK for Windows XP but not Windows 7!

So the intent is to stream media from the iDevice to the computer and have it play via the computers speakers? That sounds like a opening a can of worms that is completely unnecessary.
If the content is already on the comptuer, simply play it via iTunes on the computer.
Apple does offer an app called "Remote" for remote controlling the iTunes interface on a computer from an iOS device when on the same local network. It requires Home Sharing to be enabled in iTunes on the computer.

Loading Hyper-v devices drivers for Windows XP Task Sequence

Similar Messages

Maybe you are looking for