Loading into Windows 7 (Boot Camp) takes really long.

Hello, I recently installed Windows 7 Ultimate on my MBP Early '11 and thought everything went well, but after a restart I noticed it's not. When I try to start up a black screen shows up and the _ symbol blinks for about 2 minutes until Windows 7 finally starts to load up. I don't think that's normal and I've never encountered, nor seen this problem before. I already tried repairing the volume with the Disk Utility tool on OS X and I also tried to repair the volume by booting from the Windows 7 installation disk, but no error was found and nothing got repaired. Did anyone already have this problem and knows how to solve it? I don't really want to reinstall Windows, that's why I rather ask before doing something unnecessary.
Thank you very much!
Cheers,
Xavier

Hello, I recently installed Windows 7 Ultimate on my MBP Early '11 and thought everything went well, but after a restart I noticed it's not. When I try to start up a black screen shows up and the _ symbol blinks for about 2 minutes until Windows 7 finally starts to load up. I don't think that's normal and I've never encountered, nor seen this problem before. I already tried repairing the volume with the Disk Utility tool on OS X and I also tried to repair the volume by booting from the Windows 7 installation disk, but no error was found and nothing got repaired. Did anyone already have this problem and knows how to solve it? I don't really want to reinstall Windows, that's why I rather ask before doing something unnecessary.
Thank you very much!
Cheers,
Xavier

Similar Messages

  • ITunes Store for Windows. Everytime I try an access the iTunes Store it takes really long to connect and then it says iTunes store cannot be access. I think I am up to date with iTunes Verizon 11.0.2.26 but no matter what I try it does not connect. HELP P

    iTunes Store for Windows. Everytime I try an access the iTunes Store it takes really long to connect and then it says iTunes store cannot be access. I think I am up to date with iTunes Verison, I Have 11.0.2.26 but no matter what I try it does not connect. HELP Please???

    With those symptoms, I'd try the following document:
    Apple software on Windows: May see performance issues and blank iTunes Store
    (If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

  • Qosmio F - Unable to load into Windows or anything

    Yesterday, while studying other day outside another student bumped the table I was studying on. I would say "tapped" as it was not that hard. The normal message appears where it says the laptop will move the harddrive to a safe location etc.
    Shortly after maybe 10-20mins, I get a message on the laptop screen asking me to "backup the laptop" as there was some major error or failure. I clicked on the "additional information" and it basically said all my drives C:, G: and whatever I had disk failure or something. Unable to backup the laptop as I did not have CD's present to back it up with I took it home to do i today.
    The laptop is refusing to even load into windows at the moment. Unable to back up or anything. Keeps loading into options about system repair, restore, memory diagnostics etc. nothing fixes it.
    I've only purchased the laptop since oct/nov of 2010. Didnt start using it till jan/feb of this year also. Should I attempt to open up the HDD as it might have loosen out at the back or? Should I send it back to manufacturer to look at? It's critical exam time for me and this is devastating! Also flying overseas late June after exams and wishing to take the laptop over there. Please help! Thanks advance for all advice and suggestions.

    Hi Kyo,
    Your posting is a little bit hard to understand and a screenshot of this error message would be useful but if you get an message about defective HDD and all partitions you should contact an authorized service provider in your country.
    Your notebook should be still under warranty so the guys can replace the HDD for free. If you need some important data you can ask if they can rescue some files and do a backup. Alternative you can try it yourself if you buy an external HDD case for example. Then you can connect the HDD via USB to another computer.

  • Boot Camp can no longer be found

    Using OS 10.6.8 on an early MacPro; Boot Camp can no longer be found; checked my Leopard disk but unable to find BC on it it. What to do?

    Roy Bradshaw wrote:
    I have the same problem as Merlin. I am runnung Snow Leopard 10.6.8 on a MacPro 1.1 with Intel Processor and when I go to Boot Camp Assistant to download the Windows support it says it is not available. Does this mean I have to "up-grade" to Lion, or what is the answer.
    Read the Bootcamp Installation instructions. http://manuals.info.apple.com/en_US/Boot_Camp_Install-Setup_10.6.pdf
    The Windows Support software for Snow Leopard is on your Snow Leopard Installation disk. There is no download of Windows support software for Snow Leopard.

  • Boot Camp Partition no longer shows in StartUp Control Panel

    My Boot Camp partition no longer shows in StartUp Control Panel, but does show up using Option Key at startup. This started soon after the latest Parallels update. The Boot Camp partition seems normal and healthy in the finder. Once started via the Option Key, Windows XP-SP3 runs fine. Upgrading to BC 3.0 did not have any affect.
    I've tried LOTS of troubleshooting strategies, including completely deinstalling Parallels. Deleting obvious preferences, etc.. No joy.
    Any suggestions?

    Hi,
    if I remember correctly Parallels installs some kind of file system driver to OSX to access NTFS files system partitions.
    The 'case of the missing Windows partition' is widely spread when using these NTFS file system drivers in OSX.
    (Others are NTFS-3G; Paragons NTFS for Mac and Tuxera NTFS for Mac).
    To my knowledge there is no other remedy to this phenomenon then to deinstall the NTFS drivers.
    But as long as the Option-key is working maybe you can live with it.
    Or use rEFIt http://refit.sourceforge.net/ as a Boot-Menu.
    Regards
    Stefan

  • Will genius bar install windows (boot camp) for me?

    will genius bar install windows (boot camp) for me? if so, costs?

    Ask them. We don't know what your local Apple Store will do for you. It will certainly cost you their hourly charge for however many hours are involved. You may have to purchase Win8 from them but if not you must have a copy of your own.
    Or you can take the time to read the Boot Camp documentation and do it yourself. Start here: Apple - Support - Boot Camp. Open Boot Camp Assistant then click on the large button on the left to print the documentation. Then read it very carefully.

  • After i install window 8.1, i can't see window icon in my start up disk, i see only mac icon 10.10, but i can see both mac and win icon in my window boot camp control. i want to see window icon in my mac Yosemite 10.10.2,system preference, start up disk

    After i install window 8.1, i can't see window icon in my start up disk, i see only mac icon 10.10, but i can see both mac and win icon in my window boot camp control. i want to see window icon in my mac Yosemite 10.10.2,system preference, start up disk.

    Third-party NTFS software interferes with the Apple NTFS drivers, which control whether you can see the Bootcamp partition in the Startup Disk option. As a test, can you uninstall all third-party NTFS software and check System Preferences -> Startup Disk?

  • How do I restore data to a new mac with windows boot camp partition?

    Hi
    I have a new iMac and an old MBP, I'd like to copy all of the data of my old MBP to the iMac.Would doing that affect the windows boot camp partition?
    and how do I do it? 
    right now im backing everything up on my MBP using super duper
    both the MBP and the iMac are running on Lion

    I am assuming the Boot Camp partition is on the old MBP and that the SuperDuper clone is on an external drive and is bootable. The Super Duper clone does not include the Boot Camp Partition.
    To get the Mac Data moved you can use Migration Assistant and if you want to transfer the Boot Camp partition you would need Winclone to move/copy it to a newly created Boot Camp partition on the iMac. The SD Clone ( and a Winclone backup) is your insurance policy if some kind of difficulty arises.
    Links to more detailed info.
    http://support.apple.com/kb/HT6025
    http://support.apple.com/kb/PH11275
    http://pondini.org/OSX/MigrateLion.html
    http://twocanoes.com/support/winclone/migrating-a-bootcamp-partition-with-winclo ne
    http://twocanoes.com/support/winclone/using-sysprep-when-migrating-boot-camp

  • Could I reinstall OS X partition keeping the windows boot camp partition?

    II have a OS x partition that need reinstall. In the same hd I have a Windows Boot camp partition. The question is, could I reinstall OS X partition without affect the Windows partition?
    Thanks,
    Jorge.

    Sometimes it works, sometimes not.
    Of course you should backup both.
    Q: why do you think OS X needs to be reinstalled or something?
    Disk directory trouble?
    Because 3rd party disk utility can do better, as well as maybe clone Mac volume so you can boot and do more repairs.
    Or maybe the partition table is shot. Or bad sectors. And bad sectors can require a full format.
    In a perfect world, but disk drives and systems aren't

  • If I get windows boot camp will I be able to play Tomb raider and Sims 3

    I an getting a new laptop for school but I also what to play games like that new Lara Croft and the sims 3.  I have heard about windows boot camp.
    I think I want this retina model
    5-inch: 2.3GHz
    with Retina display
    2.3GHz quad-core Intel Core i7
    Turbo Boost up to 3.3GHz
    8GB 1600MHz memory
    256GB flash storage1
    Intel HD Graphics 4000
    NVIDIA GeForce GT 650M with 1GB of GDDR5 memory
    Built-in battery (7 hours

    Windows Boot Camp does not exist, you mean Boot Camp Assistant, which is a Mac program, it is the program you would use to prepare your Mac to run Windows.
    You will need a 64bit retail or OEM version of Windows Home or Professional.
    You will also need to read the Boot Camp Documentation thoroughly, and make a complete backup of your machine before repartitioning.

  • Boot Camp partition no longer loads/re-installs.

    Hello everyone,
    I'm having a strange issue with Boot Camp(or possibly my Hard Drive in general). I had a working Win7 Ultimate 32-bit partition last night, then rebooted into Mac OS X Mountain Lion (10.8.2). I tried rebooting into Windows 7 this morning, and it goes to a blank black screen(without the blinking cursor), and never loaded the OS. I tried accessing the Windows Boot menu to turn on visual debugging/safe mode/recovery console, and I never access that menu. I grabbed my Win7 install disc, and it also boots to a black screen. I was only able to get some display when I used a 64-bit only disc, and even that only gave me the "Windows is loading files" progress bar, and stayed there once the bar had filled.
    I stuck an Arch Linux boot disc in the system, and was able to boot all the way to a bash console.
    I then decided to back up my files, remove the Boot Camp partition and reinstall Windows 7. Same results as above. I never get to the installer to finish loading the Windows installer.
    Anyone have any ideas?
    Message was edited by: LKHetzel --- verbiage

    Hi,
    if I remember correctly Parallels installs some kind of file system driver to OSX to access NTFS files system partitions.
    The 'case of the missing Windows partition' is widely spread when using these NTFS file system drivers in OSX.
    (Others are NTFS-3G; Paragons NTFS for Mac and Tuxera NTFS for Mac).
    To my knowledge there is no other remedy to this phenomenon then to deinstall the NTFS drivers.
    But as long as the Option-key is working maybe you can live with it.
    Or use rEFIt http://refit.sourceforge.net/ as a Boot-Menu.
    Regards
    Stefan

  • Boot camp assistant no longer registers my windows partition.

    I recently decided to wipe my macbook pro (aluminum) and reinstall OS X on it. Using my leopard install disk, I erased the drive. I had a windows partition running at the time, but I decided no to erase that as well. Unfortunately it seems as thought the disk couldn't install snow leopard from scratch, so I installed tiger (my leopard disk wasn't working) and upgraded from there. This worked, and now I've got snow leopard up and running, the only issue is that boot camp assistant doesn't register my hard drive as being partitioned, so I cant remove or add partitions, though I can still boot into XP.
    I want to remove and resize the partition, should I use disk utility to erase it? Or is there an alternate solution?
    Thanks
    -Will

    Well, I just noticed the restore button at the bottom corner of boot camp assistant. Seems to have solved the problem XD.

  • Boot Camp is no longer bootable after tech tool pro.

    Really need som guidance today!
    A few days ago i created an eDrive with techtool pro, honestly I don't know why I even did this my computer was running fine...curiousity I guess. I booted in to the eDrive and ran a volume optimization on my mac os 10.8.3 partition. This went on for 12 hours until about 96%, at which point it stopped and did not complete the process.
    When I tried to boot into Mac Os, the option appeared in the Alt/Option startup selection but when only a gray screen and then a crossed circle and nothing else. I solved this only by restoring my Mac Os partition with a Time Machine backup from over a month ago.
    Now, my boot camp partiotin is no longer available in the Alt/Option start up screen, and when I manually choose it in the Mac Os startup disk utility it loads to a black screen which read "no bootable volume, please insert startup disk and press any key". Disk utility recognizes the volume which is strange.
    I never had a DVD, and i installed windows using a USB iso image, which i of course lost. Now i am trying to create a USB in bootcamp assistant, but none of them are booting.
    What is going on?
    PLEASE HELP!!!!

    You have a recovery partition for repairing and reinstalling OSX (unless TT borked that as well). Reboot, press command and R at the sound of the chime.
    Use Disk Utility to repair (do not try to repair the Boot Camp partition) or choose Reinstall OSX

  • Boot Camp...long term success or failure?

    I'm curious to find out how others feel about Apple's decision to incorporate Windows into to its Mac-Tel comptuters. Namely, will the ability to run Windows natively on Apple computers 1) help software development for OS X or 2) hinder software development for OS X?
    For example, suppose Company A has been developing Windows based software for years, but has been comptemplating finally providing a Mac-based version. Will Boot Camp now cause Company A to reverse its course and dump the Mac version? I suspect there are a lot of Company As out there.
    Regards,
    Joel

    Honestly, I have no idea. I could see it go either way, but if the schedule keeps slipping for Vista, and we see a significant rise in MacTel sales, companies are gonna want a piece of the action.
    I think the key to long term Mac PC sales (for non-corporate use) is winning over the gamers. Gamers drive PC technology. If Apple were to release a Mac that was able to utilize PC video cards, that would really help.
    However, my wife thinks this is a terrible idea, and that it will decrease the incentive to port to Mac. And the wife is always right in my house
    MacBook Pro 2.16GHz/1GB RAM   Mac OS X (10.4.6)   iBook G4 1.2GHz/1.25GB RAM

  • Cannot install windows 8.1 on imac 5k - apple support says "Correct, that machine can't install windows" Boot camp fail

    I have a brand new imac 5k, with 4ghz i7, 295x GPU, 3.1TB fusion drive.  Bought the machine so I could dual boot - I need windows for VR Dev work.
    I've spent the last week and a half on tech support calls with Apple Senior Tech agents, and Microsoft agents as well, and today have been told that indeed this machine cannot run windows 8.1.  Apparently Apple engineering knows about the issue, but says the problem is microsoft's.  Ugh.
    The latest iteration of the issue comes when installing 8.1 onto an external thunderbolt SSD (without even using boot camp) - I go through the EFI installer, convert the drive to GPT, format it as ntfs, but when I select the partition to install onto, the installer says it can't find the partition it just created.  Smuh? 
    I've also tried the install through boot camp.  This installation actually worked twice, but the install was unstable.  After booting back into osX, then returning to Windows, the windows install went corrupt and couldn't be repaired.  Subsequent attempts to install windows yielded a flurry of different errors, including "windows doesn't support GPT in this mode" or "the disk is locked, please unlock the disk" or "MBR must be converted to GPT" (where once I converted to GPT, the drive could no longer be found, despite the operation completing successfully.)
    At any rate, it's a huge mess.  I'd happily return the machine for a different config, but the company I bought it from will only swap it for a similar model -- so I've spent a pile on a machine that does not function as advertised; apple says "too bad, talk to Microsoft." Microsoft says "too bad, we've never seen this, this is an apple issue."
    Has anyone out there gotten windows up and running on an iMac5k with fusion drive?  If so, did you have to go through a crazy maze to make it work?
    Any help is appreciated.
    Thanks,
    MC

    Michael Conelly wrote:
    After much gnashing of teeth, and a half dozen support calls, I'd all but given up.  I finally seem to have solved this though - sort of - by installing windows 8.1 on boot camp on an older iMac, then cloning the bootcamp disk to an external thunderbolt drive via Winclone.  That worked seamlessly, sticking to winclone's instructions, and I can boot via EFI to Windows 8.1 on the new iMac.  So far so good.
    I usually install W8.1 via EFI by using DU and a Free Space partition. The 3TB Fusion is first split into the underlying SSD/HDD physicals. OSX and Windows OSes are installed on SSD via EFI (no BCA). The OSX part and half the HDD are then used to create a new CS volume. The other HDD half becomes NTFS for non-Windows OS files. The Hybrid MBR method is completely unsatisfactory with the 3TB Fusion drive.
    How is the TB/Winclone image for performance of the OS (since pagefile.sys is also on the TB)?

Maybe you are looking for

  • How do I alphabetize a list in Pages 5.1?

    I've found threads on how to do it in the old version of Pages, but I am having trouble now finding how to do it in the newest version. Any help? I've got my text into a table already.

  • Unknown deployment tag - web-app-class-loader

    I can create the ear file with jdeveloper, but when deploy in 9iAs with the ear file, the next error apaers: Deployment failed: Unknown deployment tag in orion-web.xml: <web-app-class-loader>; nested exception is: java.lang.InstantiationException: wh

  • Font listing issues

    Adobe Muse does not list a new system font (otf) I just installed. After trying everything I could think it turned out that I have to open a new admin account and use Muse from there, where it successfully lists the font. How do I solve this problem

  • Acrobat 9 Page Size Stuck on Automatic

    We just got a new PC in the office and have Acrobat 9 installed.  When I go to change the scan defaults or start a custom scan, the Paper Size setting is locked to Automatic.  I can drop down the box, but the only options are "Select One" (which I ca

  • Different _scope parameter of Enqueue_ lock object and Dequeue_ lock objec

    Hi, all. When we create lock object and generate enqueue_<lock object> and dequeue_<lock object>, the default value of _scope is enqueue : _scope = 2(update owner only) dequeue : _scope = 3(for both dialog owner and update owner). Does anyone tell me