Loading issue (ACR question)

Guys,
          Let's say if I have a master data info object called "Infoobject1".  I add 2 attributes to it.  When I build a process chain.  I think the infopackage I'll see would be called "infoobject1_Attr".  If I load data to this attribute, would I need to run Attribute change run ro activate the master data?  If so, would I add "Infoobject1" or "Infoobject1_Attr" to my Attribute change run process variant?
Thanks,
RG

Hai Its the base object we give for attribute change run iam sure you can get these basic info in the forum ..attributes as you have said will be given in the programme variant maintanence.Rsdds_Aggrgegate_maintain .But i suggest you to run a good search in forum lots of information is available.
Goodday.

Similar Messages

  • Does resteasy API have class loader issues when using via OSGi

    Does resteasy API have class loader issues when using via OSGi

    Hi Scott,
    THis isnt an answer to ur Question, but could u tell me which jar files are needed for the packages:
    com.sap.portal.pcm.system.ISystems
    com.sap.portal.pcm.system.ISystem
    and under which path I coul dfind them.
    Thnx
    Regards
    Meesum.

  • SAP Mobile Sales 2.0 delta load issue for Sales Orders

    Hello,
    we have used Mobile Sales 2.0 with a Windows app for a while now. Our current issue is that sales reps won't see any historical sales order data on their devices.
    Background
    Due customer requirements, we need to make small changes to customer master data attributes and reload all customers from ERP to CRM. Then we ran delta loads (MAS_PARTNER followed by all other objects) to DOE, in which virtually all 5000+ customer accounts were compared. The delta load ran for about 3 days (some performance bottleneck we haven't located yet).
    During the delta load, data on devices was inconsistent. Accounts were missing and all transaction data disappeared. After the delta loads, all accounts and contacts are OK, save for a few. Data from activities (appointments, tasks) have reappeared, as they should. Only sales orders won't reappear. The sales orders exist in the backend and belong to active accounts and sales reps.
    Settings and troubleshooting so far
    We don't have any limitations for sales orders in CRM Sales Mobile configuration.
    We've run delta loads for all objects in transaction SDOE_LOAD.
    MAS_CUSTOMIZATION etc seem fine.
    We've re-run initial load for sales orders from CRM.
    In the test system, we've even reinitialized the whole CDS database on DOE and on the devices, then re-ran the loads.
    Checked steps suggested in discussion
    SAP CRM 2.0 initial load issue
    Historical sales orders (those created before the master data reload) exist in the backend, but don't show up on the device.
    If I change one of those historical sales orders in the backend, it gets sent to the device.
    If I create a new sales order in the backend or on the device, it is saved and replicated just fine.
    To sum it up, it seems DOE is unable to identify the sales orders relevant for replication.

    First Doubt i got clarify by my self as we can go with Unwired Runtime option .
    But i still have doubt in :
    2. How can i Modifying the Main Menu for iOS.
    i am able to customize the same for windows using files SybaseCRM.Configuration.xml file.
    Same how can i do for iphone/ipad.

  • Report loading Issue

    Hello all,
    I am using Oracle 6i  for  report and oracle10g for the database.I have created a matrix report in oracle Report but which report taking so much time  to show the output it almost taking more than 10 minutes,at the same time that query executed within 1 minute in toad which used in matrix report.
    kindly guide me how to solve the loading issue.

    I did not used any formula column in my report,all the values are taking from query.
    But I used different types of format trigger in my report for the coloring purpose.Does it make any problem?

  • Data Load Issue "Request is in obsolete version of DataSource"

    Hello,
    I am getting a very strange data load issue in production, I am able to load the data upto PSA, but when I am running the DTP to load the data into 0EMPLOYEE ( Master data Object) getting bellow msg
    Request REQU_1IGEUD6M8EZH8V65JTENZGQHD not extracted; request is in obsolete version of DataSource
    The request REQU_1IGEUD6M8EZH8V65JTENZGQHD was loaded into the PSA table when the DataSource had a different structure to the current one. Incompatible changes have been made to the DataSource since then and the request cannot be extracted with the DTP anymore.
    I have taken the follwoing action
    1. Replicated the data source
    2. Deleted all request from PSA
    2. Activated the data source using (RSDS_DATASOURCE_ACTIVATE_ALL)
    3. Re transported the datasource , transformation, DTP
    Still getting the same issue
    If you have any idea please reply asap.
    Samit

    Hi
    Generate your datasource in R/3 then replicate and activate the transfer rules.
    Regards,
    Chandu.

  • Index.php loading issue

    I finished and uploaded a new site in .php.
    I  have a graphics loading issue only with IE.
    The js  accordion with images will not reload after returning to the home page.
    Anyone out thier that can shed some light on this?
    http://carpetcleaningsantabarbarapro.com/index.php
    Thank you in advance
    Crissymarie

    Ken might be on to something.  The current release of jQuery is 1.7.2 which is compatible with jQuery Cycle.
    For the latest core library, you can link to jQuery's CDN like so:
              <script type="text/javascript" src="http://code.jquery.com/jquery-latest.min.js"></script>
    You have some improperly nested <h3> tags around your lists on lines 170 and 191.  To keep your code error free, simply delete the heading tags.
    Finally, as a courtesy to your site visitors, consider adding a cookie so people don't have to watch the Flash Spokesperson every time they go to your home page.   The link below shows how:
    http://alt-web.com/DEMOS/cookie-test-show-hide-flash-intro.shtml
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists 
    http://alt-web.com/

  • TileList data load issue

    I am having an issue where the data that drives a tilelist
    works correctly when the tile list is not loaded on the first page
    of the application. When it is put on a second page in a viewstack
    then the tilelist displays correctly when you navigate to it. When
    the tilelist is placed in the first page of the application I get
    the correct number of items to display in the tilelist but the
    information the item renderer is supposed to display, ie a picture,
    caption and title, does not. The strange thing is that a Tree
    populates correctly given the same situation. Here is the sequence
    of events:
    // get tree is that data for the tree and get groups is the
    data for the tilelist
    creationComplete="get_tree.send();get_groups.send();"
    <mx:HTTPService showBusyCursor="true" id="get_groups"
    url="[some xml doc]" resultFormat="e4x"/>
    <mx:XMLListCollection id="myXMlist"
    source="{get_groups.lastResult.groups}"/>
    <mx:HTTPService showBusyCursor="true" id="get_tree"
    url="[some xml doc]" resultFormat="e4x" />
    <mx:XMLListCollection id="myTreeXMlist"
    source="{get_tree.lastResult.groups}"/>
    And then the data provider of the tilelist and tree are set
    accordingly. I tried putting moving the data calls from the
    creation complete to the initialize event thinking that it would
    hit earlier in the process and be done by the time the final
    completion came about but that didn't help either. I guess I'm just
    at a loss as to why the tree works fine no matter where I put it
    but the TileList does not. It's almost like the tree and the
    tilelist will sit and wait for the data but the item renderer in
    the tilelist will not wait. Which would explain why clicking on the
    tile list still produces the correct sequence of events but the
    visual component of the tilelist is just not working right. Anyone
    have any ideas?

    Ok, so if ASO value is wrong, then its a data load issue and no point messing around with the BSO app. You are loading two transactions to the exact same intersection. Make sure your data load is set to aggregate values and not overwrite.

  • BI Load issue in the transformation/DTP after SP 17

    Hello,
    After SP 17 applied in our BI system, we are having load issue in one particular transformation/DTP.
    See below the errors:
    u2022 Messages for 101 data records saved; request is red acc. to
    configuration
    u2022 Thee is no active nametab in the system, although an active ABAP/4
    Dictionary object was expected. Reactivate the ABAP/4 Dictionary object.
    Also I have activated the DSO, transformation and DTP. Also I went to SE14 and try to adjust my DSO, SE11 and activate the table but still having the issue.
    Can someone advise me on how to resolve this issue?
    Thanks a lot.
    Cesar

    Hi,
    Do the following: In BI, run transaction SE38 >> RSDG_CUBE_ACTIVATE to recreate the Metadata information
    for the Info-provider.
    Then execute another program via SE38: RSDD_RSTMPLWIDTP_GEN_ALL
    See Note 1161940 and 1152453 for more details.
    Regards,

  • BW sales load issue

    I have a problem with this.  The jobs in the screen snapshot below are running too long - 2LIS_11_VAITM, 2LIS_11_V_ITM, and 2LIS_13_VDITM.  They use to run for just a couple of minutes.  The job configuration is; when the first job finishes a delay of 10 minutes will be incurred then the second job will run, then another 10 minute delay before the third job runs.  After these 3 jobs are complete an activation job needs to run.  This activation job began to fail because the first 3 jobs were not finished.  For now, the activation job has been moved but we need to understand why these are running longer and fix it.  We may be experiencing a problem with database performance in PDF but I would not think it would take that much longer. 
    This is the BW sales load issue
    The info-package group is schedule @ 00:05 am and it contains 3 info-packages: VAITM, V_ITM and VDITM with 10 minutes execution gap.
    The first VAITM started 00:05:46 and ended it up in BW at 00:09:02.
    Then we have 10 minutes delayed between jobs.
    V_ITM started 00:20:12 and for some reason it finished at 01:00:51. We can see communication between PDF and BWP took much longer than normal.
    Then we have 10 minutes delayed between jobs
    At 01:00:25 the activation job started and failed. It requires the info-packages to be in GREEN status but V_ITM finished @ 01:00:51.
    It probably failed because V_ITM still had YELLOW status at the moment.
    VDITM started 01:12:02 and finally finished it load at 02:09:16. A big communication delayed between system.
    See below an example of the load on the 01/14/2007. It looks normal communication between systems
    Could you please give solution for this.
    Thanks
    Vasu.

    Hi,
    For every job you define and at the same time, you can also define the priority
    levels to each job, since, during your job execution might be your job queue is
    full with some other background processings, so try setting up the priority levels
    of the job.
    cheers,
    Pattan.

  • Websites loaded only with question marks.

    Some websites are loaded only with question marks after I updated to Firefox 4.0.1. I have attached a screenshot in the link below.
    [http://img64.imageshack.us/img64/2462/wmarks.png http://img64.imageshack.us/img64/2462/wmarks.png]

    Update Skype to the latest version. The one you have installed at the moment is incompatible with Firefox. See https://www.mozilla.com/en-US/blocklist/
    In addition, go to Add-ons | Extensions and disable "BitDefender Antiphishing Toolbar". Test your sites where you get the question marks to see if it rectifies the problem. If it doesn't, you can re-enable it again.
    Do the same with the Conduit Engine.
    Install Java 1.6.0_25 via http://www.java.com/en/ and then remove all previous versions. Older versions are a security risk. Uninstall via Add/Remove Programs.
    Install VLC 1.1.9 via http://www.videolan.org
    The version you have on your system exposes your machine to attack. Actually, version 1.1.9 is also insecure, but not as bad as the one you have installed. See [http://www.h-online.com/open/news/item/VLC-Media-Player-1-1-9-closes-security-holes-1226673.html VLC Media Player 1.1.9 closes security holes] ''and'' [http://www.h-online.com/open/news/item/A-new-security-flaw-hits-VLC-1225820.html A new security flaw hits VLC]
    You'll just have to keep an eye on the videolan.org site for when they release a new patch.
    If the problem persists, try running Firefox in [[Safe Mode]]. If it functions properly in that configuration, then one of your add-ons is the culprit.

  • Demantra Data Load Issue

    I am new to Demantra. Have installed a stand alone Demantra system in our server. In order to load data, I created a new model, defined item and location levels, then clicked on 'Build Model'. The data is loaded into 3 custom tables created by me. After creating the model, I cannot login to 'Collaborator Workbench', it gives message 'There are system errors. Please contact your System Administrator'. Can anyone please tell me what I am doing wrong and how to resolve the issue.
    Thanks

    Ok, so if ASO value is wrong, then its a data load issue and no point messing around with the BSO app. You are loading two transactions to the exact same intersection. Make sure your data load is set to aggregate values and not overwrite.

  • Integrated WL/Jdeveloper class loading issue

    Hello,
    I am trying to run a deployed project , getting into this class loading issue. Any idea?
    javax.security.auth.login.LoginException: java.lang.LinkageError: loader constraint violation: when resolving interface method "com.scat.util.identity.UserFactory.lookup(Ljava/lang/String;)Lcom/scat/domain/identity/User;" the class loader (instance of weblogic/utils/classloaders/ChangeAwareClassLoader) of the current class, com/scat/auth/authentication/login/UserLoginModule, and the class loader (instance of sun/misc/Launcher$AppClassLoader) for resolved class, com/scatl/util/identity/UserFactory, have different Class objects for the type com/scat/domain/identity/User used in the signature
    Thanks
    Ram

    How many times are you loading the com/scat/domain/identity/User type?
    Is this in the system classloader and the application? and are you using class loading filtering in the application, for example,
    in weblogic.xml - prefer-web-inf-classes?

  • OBIA Financial Analytics - ETL Incremental Load issue

    Hi guys
    I have an issue while doing ETL Incremental load in DEV. Source, Target ORACLE.
    issue with these two tasks: SDE_ORA_GL_JOURNALS and SDE_ORA_ImportReferenceExtract
    incremental load is holding at SDE_ORA_GL_JOURNALS.....on Database sessions the query is completed and also the session is done but no update in the session log for that session in informatica. It says hust ' SQL Query issued to database' . no progress from there. and the task in both informatica session monitor and DAC says running and keeps running for ever. No errors seen in any of the log files.
    Any idea on whats happening? I checked session logs, DAC servr logs, Database alert logs, Exception logs on source and found nothing.
    I tried to run these Informatica generated queries in SQL developer and they ran well and I did see the results. More over, weird thing is from past three days and about 10 runs....the statis tics are
    both thses tasks run in parallel and most of the times Import references extract is completed first and then GL_Journals is running for ever
    In one run, GL_Journals is done but then Import reference extract is running for ever. I dont exactly understand whats happening. I see both the queries running in parallel on source database.
    Please give me some idea on this. And this same stuff is running good on QA. I dont know how this is working.....any idea on this is appreciated. Thank you. let me know of ay questions. Thank you in advance.

    Please refer this:
    http://gerardnico.com/wiki/obia/installation_7961

  • Toshiba Satellite a505-6005 hard drive issue and questions regarding options I may have

    Issue: start up computer and windows does not start. It eventually goes to a startup repair screen and eventually says "resolving disk errors...", and that's if it even gets to that screen. Unfortunately I never made a recovery disk or system image discs (I know that was not smart). I did however kept my files backed up so that was good.
    Steps I took: Took it to Best Buy and the tech advised me that the Black Tie 2 year protection had expired on Jan 30th 2012, and so it could not be repaired for free. I asked the tech there how much it would cost to fix and they had advised me that it was most likely a hard drive issue and that it would cost nearly $400 to replace/fix it. So I decided to buy a new Asus K53E-BBR14 laptop since it was not much more. When I got home and loaded everything up and got the computer to how I want, I went ahead and made a recovery disc and system image disc's. I tried using the recovery disc that I had made with my Asus in the Toshiba laptop and boot it from the dvd drive and it did not get anywhere. So I ASSUME that it really is a hard drive error because the RAM worked just fine in my new laptop and "repairing disk errors.." means something is wrong with the hard drive:
    Now that you know the background of what has happened my questions are as followed:
    1. Can I buy a new hard drive for the Toshiba and use the recovery and system image disc's i created on the new hard drive that i install in the toshiba? and just removed the bloatware from Asus (or does that not even get added to the disc's I created)?
    2. If so, will it prompt me to enter the Windows 7 product key? and therefore using the product key located on the bottom of the toshiba?
    3. What other steps could I take to make this toshiba laptop salvageable? This way i can turn around and sell it.
    Thanks,
    Russell States

    Also,
    I noticed that i can purchase (well pay the shipping anyways) recovery media from Toshiba. Can I use that on a new hard drive installed in the toshiba?
    BTW ran the Windows Memory Diagnostics Tool and no problems were found with the memory. and i do not care about the old hard drive as I have MY files backed up. I just want to try to get this toshiba laptop back to being "like new".
    Thanks,
    Russell

  • Flat  File to InfoCube Load Issue

    Hello All,
                  I am newbie in the SAP BW land. Probably a simple question to BW Experts.
    This is crude implementation of the Fu and Fu example.
    Environment SAP  BW 7.0
    Iam trying to load a flat file to the Info Cube.
    1. I am able to successfully preview the data from the data sources
    2. Also able to load the data to the PSA, which i see from PSA maintenance screen
    Issue arises when i try to load the data to the Info Cube by running the DTP Process, it just does not load the data.
    I ma unable to figure of what the issue is
    Following the structure of the Flat File with 1 line of data
    Day      Unit of Measure     Customer ID     Meterial Number     Sales Representative ID     Sales Office     Sales Region     Price of Material     Sales quantity     Sales revenue     Currency
    20100510     gms     1122334455     92138     9710274     Chicago     NorthEast     890     50     928     USD
    Following is the structure of the Info Cube
    Characteristics
    Time
    Unit
    Customer ID
    Material Number
    Sales Representative ID
    Sales Office
    Sales Region
    Measures
    Price of Material     
    Sales quantity     
    Sales revenue
    --- also where can i find a data flow diagram or steps of what needs to be done to design a standard cube loading process
    Please tell me where am I  going wrong.

    II think i made progress but i still do not see the data in the InfoCube
    When i visit the PSA by
    visiting the source system -> Manage PSA -> Select the line item -> PSA Maintenance-> I see the record completely like this
    @5B@     1     1     05/10/2010     GMS     1,122,334,455     92,138     9,710,274     CHICAGO     NORTHEAST     890     50     928
    But when i run the DTP Process i see the following error message
    I think this is due to a data type mismatch between flat file and the infocube.
    Please adivse
    Error I see is
    @5C@     No SID found for value 'GMS ' of characteristic 0UNIT     BRAIN     70     @35@     @3R@
    Also where can i click or extract the InfoCube structure in plain text so that i can post it on the forum for your better visibility

Maybe you are looking for