Loading issue...plz assist
Data loading(delta update) from a ODS to an info object is stopped 2 months before.
So to update the records,from ODS to info-object,I made a repair load.In repair load it is shown that added records are 0,but records get updated into info-object.If any selection I choose,for that selection records are getting updated into info-object but added records are shown as 0.
What is exactly happening,plz reply....
Hi,
Got to RSMO > Details > Processing.
It will tell you what is happening.
Some times system wont show changed records.
It will only show new records alone as added records.
I think that may true in your case.
Thanks,
JituK
Similar Messages
-
i have recently purchased my mac book with retina.i have explore all the feature but couldn't able to understand how to use my facetime. plz assist me
rahulGreetings rahul81,
After reviewing your post, it sounds like you want to know how to use FaceTime. I would recommend that you read this article, it may be able to help the issue.
FaceTime for Mac (Yosemite): Make and receive FaceTime calls
Thanks for using Apple Support Communities.
Take care,
Mario -
SAP Mobile Sales 2.0 delta load issue for Sales Orders
Hello,
we have used Mobile Sales 2.0 with a Windows app for a while now. Our current issue is that sales reps won't see any historical sales order data on their devices.
Background
Due customer requirements, we need to make small changes to customer master data attributes and reload all customers from ERP to CRM. Then we ran delta loads (MAS_PARTNER followed by all other objects) to DOE, in which virtually all 5000+ customer accounts were compared. The delta load ran for about 3 days (some performance bottleneck we haven't located yet).
During the delta load, data on devices was inconsistent. Accounts were missing and all transaction data disappeared. After the delta loads, all accounts and contacts are OK, save for a few. Data from activities (appointments, tasks) have reappeared, as they should. Only sales orders won't reappear. The sales orders exist in the backend and belong to active accounts and sales reps.
Settings and troubleshooting so far
We don't have any limitations for sales orders in CRM Sales Mobile configuration.
We've run delta loads for all objects in transaction SDOE_LOAD.
MAS_CUSTOMIZATION etc seem fine.
We've re-run initial load for sales orders from CRM.
In the test system, we've even reinitialized the whole CDS database on DOE and on the devices, then re-ran the loads.
Checked steps suggested in discussion
SAP CRM 2.0 initial load issue
Historical sales orders (those created before the master data reload) exist in the backend, but don't show up on the device.
If I change one of those historical sales orders in the backend, it gets sent to the device.
If I create a new sales order in the backend or on the device, it is saved and replicated just fine.
To sum it up, it seems DOE is unable to identify the sales orders relevant for replication.First Doubt i got clarify by my self as we can go with Unwired Runtime option .
But i still have doubt in :
2. How can i Modifying the Main Menu for iOS.
i am able to customize the same for windows using files SybaseCRM.Configuration.xml file.
Same how can i do for iphone/ipad. -
Hello all,
I am using Oracle 6i for report and oracle10g for the database.I have created a matrix report in oracle Report but which report taking so much time to show the output it almost taking more than 10 minutes,at the same time that query executed within 1 minute in toad which used in matrix report.
kindly guide me how to solve the loading issue.I did not used any formula column in my report,all the values are taking from query.
But I used different types of format trigger in my report for the coloring purpose.Does it make any problem? -
Data Load Issue "Request is in obsolete version of DataSource"
Hello,
I am getting a very strange data load issue in production, I am able to load the data upto PSA, but when I am running the DTP to load the data into 0EMPLOYEE ( Master data Object) getting bellow msg
Request REQU_1IGEUD6M8EZH8V65JTENZGQHD not extracted; request is in obsolete version of DataSource
The request REQU_1IGEUD6M8EZH8V65JTENZGQHD was loaded into the PSA table when the DataSource had a different structure to the current one. Incompatible changes have been made to the DataSource since then and the request cannot be extracted with the DTP anymore.
I have taken the follwoing action
1. Replicated the data source
2. Deleted all request from PSA
2. Activated the data source using (RSDS_DATASOURCE_ACTIVATE_ALL)
3. Re transported the datasource , transformation, DTP
Still getting the same issue
If you have any idea please reply asap.
SamitHi
Generate your datasource in R/3 then replicate and activate the transfer rules.
Regards,
Chandu. -
I've been having an issue with assistive touch, every time I open an app. the AT disappears the from the screen and I have to turn it off and ON again. Is there a way to fix this?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
Index.php loading issue
I finished and uploaded a new site in .php.
I have a graphics loading issue only with IE.
The js accordion with images will not reload after returning to the home page.
Anyone out thier that can shed some light on this?
http://carpetcleaningsantabarbarapro.com/index.php
Thank you in advance
CrissymarieKen might be on to something. The current release of jQuery is 1.7.2 which is compatible with jQuery Cycle.
For the latest core library, you can link to jQuery's CDN like so:
<script type="text/javascript" src="http://code.jquery.com/jquery-latest.min.js"></script>
You have some improperly nested <h3> tags around your lists on lines 170 and 191. To keep your code error free, simply delete the heading tags.
Finally, as a courtesy to your site visitors, consider adding a cookie so people don't have to watch the Flash Spokesperson every time they go to your home page. The link below shows how:
http://alt-web.com/DEMOS/cookie-test-show-hide-flash-intro.shtml
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/ -
I am having an issue where the data that drives a tilelist
works correctly when the tile list is not loaded on the first page
of the application. When it is put on a second page in a viewstack
then the tilelist displays correctly when you navigate to it. When
the tilelist is placed in the first page of the application I get
the correct number of items to display in the tilelist but the
information the item renderer is supposed to display, ie a picture,
caption and title, does not. The strange thing is that a Tree
populates correctly given the same situation. Here is the sequence
of events:
// get tree is that data for the tree and get groups is the
data for the tilelist
creationComplete="get_tree.send();get_groups.send();"
<mx:HTTPService showBusyCursor="true" id="get_groups"
url="[some xml doc]" resultFormat="e4x"/>
<mx:XMLListCollection id="myXMlist"
source="{get_groups.lastResult.groups}"/>
<mx:HTTPService showBusyCursor="true" id="get_tree"
url="[some xml doc]" resultFormat="e4x" />
<mx:XMLListCollection id="myTreeXMlist"
source="{get_tree.lastResult.groups}"/>
And then the data provider of the tilelist and tree are set
accordingly. I tried putting moving the data calls from the
creation complete to the initialize event thinking that it would
hit earlier in the process and be done by the time the final
completion came about but that didn't help either. I guess I'm just
at a loss as to why the tree works fine no matter where I put it
but the TileList does not. It's almost like the tree and the
tilelist will sit and wait for the data but the item renderer in
the tilelist will not wait. Which would explain why clicking on the
tile list still produces the correct sequence of events but the
visual component of the tilelist is just not working right. Anyone
have any ideas?Ok, so if ASO value is wrong, then its a data load issue and no point messing around with the BSO app. You are loading two transactions to the exact same intersection. Make sure your data load is set to aggregate values and not overwrite.
-
Issue with assistive access not keeping permissions
Since a recent upgrade (likely from OS X 10.9.x to 10.10.2) I've had issues with Assistive Access blocking Automator and Applescript from interaction with dialogs.
If I run my script or my Automator workflow (which basically has the same script in it) I get the error:
System Events got an error: Automator is not allowed assistive access. (in the case of Automator).
If I open Automator, and then untick and retick the Automator entry in the Accessibility options within Security & Privacy (System Preferences), then workflow can run again. It continues to work until I Quit Automator. Then it's as if OS X no longer trusts Automator to be the same app I gave Accessibility permissions to. And the situation repeats. It's much as if it were not code-signed. The exact same issue plays out with Apple Script.
I came across this info, which I hoped would solve the problem, but it made no difference: http://macscripter.net/viewtopic.php?id=43394 and http://bit.ly/1x3SRmc
In my Accessibility permissions I now have:
Script Editor
Automator
1Password 5 (which the script interacts with)
com.apple.security.agentStub.xpc (in case that's being called up and triggering the Accessibility issue)
osascript (in case that's handling the script and triggering the Accessibility issue)
SecurityAgent.xpc (in case that was triggering the Accessibility issue)
I added all these because the post at http://bit.ly/1x3SRmc indicated that anything Apple Script is interacting with needs Accessibility access permissions.
My script is as follows:
set appName to "SecurityAgent"
set passApp to "1Password 5" (* set this to the name of your password manager *)
tell application "System Events"
if not (exists window 1 of process appName) then -- test if SecurityAgent window exists
set answer to display dialog "The password dialog was not found. Please check." buttons {"Ok"}
return -- abort if SecurityAgent window does not exist
end if
end tell
tell application "System Events"
set position of window 1 of process appName to {10, 10}
-- move SecurityAgent window out of the way
end tell
activate application passApp
tell application "System Events"
tell application "SystemUIServer"
set answer to display dialog "Make sure correct 1Password item is actively selected (i.e. click it again if it was previously selected), then click “Continue” to proceed." buttons {"Continue"}
end tell
tell process passApp
(* If you are not using 1Password, you may need to change the menu item clicks, below, to whatever is correct in your particular password manager *)
click menu item "copy password" of menu "item" of menu bar 1
delay 1
set appData to the clipboard
end tell
tell application "System Events"
tell process appName
set value of text field 1 of window 1 to appData
if exists (text field 2 of window 1) then
set value of text field 2 of window 1 to appData
if exists checkbox 1 of window 1 then
if value of checkbox 1 of window 1 is 1 then
click checkbox 1 of window 1
end if
end if
set value of checkbox 1 of window 1 to 0
delay 1 (* gives a moment to see what's going on *)
click button "OK" of window 1
else
if value of checkbox 1 of window 1 is 1 then
click checkbox 1 of window 1
end if
delay 1 (* gives a moment to see what's going on *)
click button "OK" of window 1
end if
end tell
end tell
end tell
In Automator it would appear the script is generating an error as soon as it reaches line 5, "if not (exists window 1 of process appName) then"
I would greatly appreciate some assistance in resolving this issue.Starting with Mavericks, Apple changed the way that the accessibility works (see Using AppleScript with Accessibility and Security features in Mavericks) - each individual application needs to be given access, instead of a global option. A regular AppleScript application saves properties and global variables with the script, which makes it a new application as far as the system security is concerned, so it needs to be re-added to the accessibility list. To work with this new security feature, you need to code-sign your AppleScript application or make the script(s) in the bundle read-only so that they don't get changed (note that an AppleScript-based project in Xcode does not modify the application bundle by saving properties and globals).
-
BI Load issue in the transformation/DTP after SP 17
Hello,
After SP 17 applied in our BI system, we are having load issue in one particular transformation/DTP.
See below the errors:
u2022 Messages for 101 data records saved; request is red acc. to
configuration
u2022 Thee is no active nametab in the system, although an active ABAP/4
Dictionary object was expected. Reactivate the ABAP/4 Dictionary object.
Also I have activated the DSO, transformation and DTP. Also I went to SE14 and try to adjust my DSO, SE11 and activate the table but still having the issue.
Can someone advise me on how to resolve this issue?
Thanks a lot.
CesarHi,
Do the following: In BI, run transaction SE38 >> RSDG_CUBE_ACTIVATE to recreate the Metadata information
for the Info-provider.
Then execute another program via SE38: RSDD_RSTMPLWIDTP_GEN_ALL
See Note 1161940 and 1152453 for more details.
Regards, -
I have a problem with this. The jobs in the screen snapshot below are running too long - 2LIS_11_VAITM, 2LIS_11_V_ITM, and 2LIS_13_VDITM. They use to run for just a couple of minutes. The job configuration is; when the first job finishes a delay of 10 minutes will be incurred then the second job will run, then another 10 minute delay before the third job runs. After these 3 jobs are complete an activation job needs to run. This activation job began to fail because the first 3 jobs were not finished. For now, the activation job has been moved but we need to understand why these are running longer and fix it. We may be experiencing a problem with database performance in PDF but I would not think it would take that much longer.
This is the BW sales load issue
The info-package group is schedule @ 00:05 am and it contains 3 info-packages: VAITM, V_ITM and VDITM with 10 minutes execution gap.
The first VAITM started 00:05:46 and ended it up in BW at 00:09:02.
Then we have 10 minutes delayed between jobs.
V_ITM started 00:20:12 and for some reason it finished at 01:00:51. We can see communication between PDF and BWP took much longer than normal.
Then we have 10 minutes delayed between jobs
At 01:00:25 the activation job started and failed. It requires the info-packages to be in GREEN status but V_ITM finished @ 01:00:51.
It probably failed because V_ITM still had YELLOW status at the moment.
VDITM started 01:12:02 and finally finished it load at 02:09:16. A big communication delayed between system.
See below an example of the load on the 01/14/2007. It looks normal communication between systems
Could you please give solution for this.
Thanks
Vasu.Hi,
For every job you define and at the same time, you can also define the priority
levels to each job, since, during your job execution might be your job queue is
full with some other background processings, so try setting up the priority levels
of the job.
cheers,
Pattan. -
Hi iam using IPHONE4 , when i coonect it to my PC , itunes get hang and don't detect my iphone , how i can sort out this issue plz help me
iPhone, iPad, or iPod touch not appearing in iTunes
-
Does resteasy API have class loader issues when using via OSGi
Does resteasy API have class loader issues when using via OSGi
Hi Scott,
THis isnt an answer to ur Question, but could u tell me which jar files are needed for the packages:
com.sap.portal.pcm.system.ISystems
com.sap.portal.pcm.system.ISystem
and under which path I coul dfind them.
Thnx
Regards
Meesum. -
I am new to Demantra. Have installed a stand alone Demantra system in our server. In order to load data, I created a new model, defined item and location levels, then clicked on 'Build Model'. The data is loaded into 3 custom tables created by me. After creating the model, I cannot login to 'Collaborator Workbench', it gives message 'There are system errors. Please contact your System Administrator'. Can anyone please tell me what I am doing wrong and how to resolve the issue.
ThanksOk, so if ASO value is wrong, then its a data load issue and no point messing around with the BSO app. You are loading two transactions to the exact same intersection. Make sure your data load is set to aggregate values and not overwrite.
-
When the user Miro Generating:-
1. Give the Ref.No.Business places,
service Sheet No.
and the G/L No.. its take in production server,
But here actual its upated Medical Aid,G/l
But its comes in Rawmaterial exemption,account i.e not relevant account
actual Here its comes in G/L medical account
How its overthe issue plz help for me.
2.In before indevelopment server do that same thing in DEvelopment server, its Give the Error mesage i.e DELIVRY NOT SERIVICE ETNRY SHEET ..............(number) doest not exitHello,
There are several public KB articles that may apply to your situation. But, rather than try and list them all here for you, I suggest you go here:
http://btsc.webapps.blackberry.com/btsc/microsites/microsite.do
Search on the exact error message and see any of the resulting articles are on point to your situation.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
OXS server 3 with mavericks, it will not load up the assistant with open directory and will not allow me to use old opeopen directory and will not allow me to use old open directory it was not a clean install just upgrade. any help or advise appreciated as i really need the server.
I wonder if the disk being referred to is actually your iPod which is not plugged in. Maybe something has stuck thinking the iPod should be there.
Try completely removing all the iTunes related programs according to this method.
http://support.apple.com/kb/HT1923
Restart you PC and see if startup improves.
If it doesn't improve you need to consider the possibility that there is something else going on.
If The problem goes away, hopefully a fresh install will be OK.
Maybe you are looking for
-
External usb sound card is not working correctly
When my computer usb sound card is working correctly. If your computer to sleep and wake up the sound card is working correctly. If you disable the sound card and connect again, it appears extraneous sound on the background music playing. Each time t
-
Ok, this is one more of those basic skills that I've never mastered. What is the best way to add the drivers to the instr. lib? After extracting the files from the zip file I've got a set of drivers in .llb and the .mnu files in a directory (see the
-
WebLogic 11g - Stuck Thread issue observed during MS-ADS authentication
Hi We have weblogic server 10.3.5 installed on RHEL 5.6. For our application authentication, we are getting user credentials authenticated for application login page using Microsoft Active Directory Service (MS-ADS) configured under WebLogic Security
-
RenderKitId and ViewHandler in JSF1.2
I've been reading the JSF 1.2 spec, and I am a bit confused about how the ViewHandler interacts with the view's renderKitId. From the JSF 1.2 Final Draft (May 2006), Section 9.4.20 (f:view) indicates that the renderKitId attribute is set in this orde
-
How do I remove objects in the background of a picture?
I just got Elements 8 and have no idea how to use it!